| // SPDX-License-Identifier: GPL-2.0-or-later |
| /*************************************************************************** |
| * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * |
| * Copyright (C) 2007-2011 Hans de Goede <hdegoede@redhat.com> * |
| * * |
| ***************************************************************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/platform_device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/io.h> |
| #include <linux/acpi.h> |
| |
| #define DRVNAME "f71882fg" |
| |
| #define SIO_F71858FG_LD_HWM 0x02 /* Hardware monitor logical device */ |
| #define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */ |
| #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ |
| #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ |
| |
| #define SIO_REG_LDSEL 0x07 /* Logical device select */ |
| #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ |
| #define SIO_REG_DEVREV 0x22 /* Device revision */ |
| #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ |
| #define SIO_REG_ENABLE 0x30 /* Logical device enable */ |
| #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ |
| |
| #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ |
| #define SIO_F71808E_ID 0x0901 /* Chipset ID */ |
| #define SIO_F71808A_ID 0x1001 /* Chipset ID */ |
| #define SIO_F71858_ID 0x0507 /* Chipset ID */ |
| #define SIO_F71862_ID 0x0601 /* Chipset ID */ |
| #define SIO_F71868_ID 0x1106 /* Chipset ID */ |
| #define SIO_F71869_ID 0x0814 /* Chipset ID */ |
| #define SIO_F71869A_ID 0x1007 /* Chipset ID */ |
| #define SIO_F71882_ID 0x0541 /* Chipset ID */ |
| #define SIO_F71889_ID 0x0723 /* Chipset ID */ |
| #define SIO_F71889E_ID 0x0909 /* Chipset ID */ |
| #define SIO_F71889A_ID 0x1005 /* Chipset ID */ |
| #define SIO_F8000_ID 0x0581 /* Chipset ID */ |
| #define SIO_F81768D_ID 0x1210 /* Chipset ID */ |
| #define SIO_F81865_ID 0x0704 /* Chipset ID */ |
| #define SIO_F81866_ID 0x1010 /* Chipset ID */ |
| #define SIO_F71858AD_ID 0x0903 /* Chipset ID */ |
| #define SIO_F81966_ID 0x1502 /* Chipset ID */ |
| |
| #define REGION_LENGTH 8 |
| #define ADDR_REG_OFFSET 5 |
| #define DATA_REG_OFFSET 6 |
| |
| #define F71882FG_REG_IN_STATUS 0x12 /* f7188x only */ |
| #define F71882FG_REG_IN_BEEP 0x13 /* f7188x only */ |
| #define F71882FG_REG_IN(nr) (0x20 + (nr)) |
| #define F71882FG_REG_IN1_HIGH 0x32 /* f7188x only */ |
| |
| #define F81866_REG_IN_STATUS 0x16 /* F81866 only */ |
| #define F81866_REG_IN_BEEP 0x17 /* F81866 only */ |
| #define F81866_REG_IN1_HIGH 0x3a /* F81866 only */ |
| |
| #define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr))) |
| #define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr))) |
| #define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr))) |
| #define F71882FG_REG_FAN_STATUS 0x92 |
| #define F71882FG_REG_FAN_BEEP 0x93 |
| |
| #define F71882FG_REG_TEMP(nr) (0x70 + 2 * (nr)) |
| #define F71882FG_REG_TEMP_OVT(nr) (0x80 + 2 * (nr)) |
| #define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr)) |
| #define F71882FG_REG_TEMP_STATUS 0x62 |
| #define F71882FG_REG_TEMP_BEEP 0x63 |
| #define F71882FG_REG_TEMP_CONFIG 0x69 |
| #define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr)) |
| #define F71882FG_REG_TEMP_TYPE 0x6B |
| #define F71882FG_REG_TEMP_DIODE_OPEN 0x6F |
| |
| #define F71882FG_REG_PWM(nr) (0xA3 + (16 * (nr))) |
| #define F71882FG_REG_PWM_TYPE 0x94 |
| #define F71882FG_REG_PWM_ENABLE 0x96 |
| |
| #define F71882FG_REG_FAN_HYST(nr) (0x98 + (nr)) |
| |
| #define F71882FG_REG_FAN_FAULT_T 0x9F |
| #define F71882FG_FAN_NEG_TEMP_EN 0x20 |
| #define F71882FG_FAN_PROG_SEL 0x80 |
| |
| #define F71882FG_REG_POINT_PWM(pwm, point) (0xAA + (point) + (16 * (pwm))) |
| #define F71882FG_REG_POINT_TEMP(pwm, point) (0xA6 + (point) + (16 * (pwm))) |
| #define F71882FG_REG_POINT_MAPPING(nr) (0xAF + 16 * (nr)) |
| |
| #define F71882FG_REG_START 0x01 |
| |
| #define F71882FG_MAX_INS 11 |
| |
| #define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */ |
| |
| static unsigned short force_id; |
| module_param(force_id, ushort, 0); |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); |
| |
| enum chips { f71808e, f71808a, f71858fg, f71862fg, f71868a, f71869, f71869a, |
| f71882fg, f71889fg, f71889ed, f71889a, f8000, f81768d, f81865f, |
| f81866a}; |
| |
| static const char *const f71882fg_names[] = { |
| "f71808e", |
| "f71808a", |
| "f71858fg", |
| "f71862fg", |
| "f71868a", |
| "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ |
| "f71869a", |
| "f71882fg", |
| "f71889fg", /* f81801u too, same id */ |
| "f71889ed", |
| "f71889a", |
| "f8000", |
| "f81768d", |
| "f81865f", |
| "f81866a", |
| }; |
| |
| static const char f71882fg_has_in[][F71882FG_MAX_INS] = { |
| [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0 }, |
| [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0 }, |
| [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 }, |
| [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 }, |
| [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 }, |
| [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 }, |
| [f81768d] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, |
| [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0 }, |
| [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }, |
| }; |
| |
| static const char f71882fg_has_in1_alarm[] = { |
| [f71808e] = 0, |
| [f71808a] = 0, |
| [f71858fg] = 0, |
| [f71862fg] = 0, |
| [f71868a] = 0, |
| [f71869] = 0, |
| [f71869a] = 0, |
| [f71882fg] = 1, |
| [f71889fg] = 1, |
| [f71889ed] = 1, |
| [f71889a] = 1, |
| [f8000] = 0, |
| [f81768d] = 1, |
| [f81865f] = 1, |
| [f81866a] = 1, |
| }; |
| |
| static const char f71882fg_fan_has_beep[] = { |
| [f71808e] = 0, |
| [f71808a] = 0, |
| [f71858fg] = 0, |
| [f71862fg] = 1, |
| [f71868a] = 1, |
| [f71869] = 1, |
| [f71869a] = 1, |
| [f71882fg] = 1, |
| [f71889fg] = 1, |
| [f71889ed] = 1, |
| [f71889a] = 1, |
| [f8000] = 0, |
| [f81768d] = 1, |
| [f81865f] = 1, |
| [f81866a] = 1, |
| }; |
| |
| static const char f71882fg_nr_fans[] = { |
| [f71808e] = 3, |
| [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */ |
| [f71858fg] = 3, |
| [f71862fg] = 3, |
| [f71868a] = 3, |
| [f71869] = 3, |
| [f71869a] = 3, |
| [f71882fg] = 4, |
| [f71889fg] = 3, |
| [f71889ed] = 3, |
| [f71889a] = 3, |
| [f8000] = 3, /* +1 fan which is monitor only */ |
| [f81768d] = 3, |
| [f81865f] = 2, |
| [f81866a] = 3, |
| }; |
| |
| static const char f71882fg_temp_has_beep[] = { |
| [f71808e] = 0, |
| [f71808a] = 1, |
| [f71858fg] = 0, |
| [f71862fg] = 1, |
| [f71868a] = 1, |
| [f71869] = 1, |
| [f71869a] = 1, |
| [f71882fg] = 1, |
| [f71889fg] = 1, |
| [f71889ed] = 1, |
| [f71889a] = 1, |
| [f8000] = 0, |
| [f81768d] = 1, |
| [f81865f] = 1, |
| [f81866a] = 1, |
| }; |
| |
| static const char f71882fg_nr_temps[] = { |
| [f71808e] = 2, |
| [f71808a] = 2, |
| [f71858fg] = 3, |
| [f71862fg] = 3, |
| [f71868a] = 3, |
| [f71869] = 3, |
| [f71869a] = 3, |
| [f71882fg] = 3, |
| [f71889fg] = 3, |
| [f71889ed] = 3, |
| [f71889a] = 3, |
| [f8000] = 3, |
| [f81768d] = 3, |
| [f81865f] = 2, |
| [f81866a] = 3, |
| }; |
| |
| static struct platform_device *f71882fg_pdev; |
| |
| struct f71882fg_sio_data { |
| enum chips type; |
| }; |
| |
| struct f71882fg_data { |
| unsigned short addr; |
| enum chips type; |
| struct device *hwmon_dev; |
| |
| struct mutex update_lock; |
| int temp_start; /* temp numbering start (0 or 1) */ |
| bool valid; /* true if following fields are valid */ |
| char auto_point_temp_signed; |
| unsigned long last_updated; /* In jiffies */ |
| unsigned long last_limits; /* In jiffies */ |
| |
| /* Register Values */ |
| u8 in[F71882FG_MAX_INS]; |
| u8 in1_max; |
| u8 in_status; |
| u8 in_beep; |
| u16 fan[4]; |
| u16 fan_target[4]; |
| u16 fan_full_speed[4]; |
| u8 fan_status; |
| u8 fan_beep; |
| /* |
| * Note: all models have max 3 temperature channels, but on some |
| * they are addressed as 0-2 and on others as 1-3, so for coding |
| * convenience we reserve space for 4 channels |
| */ |
| u16 temp[4]; |
| u8 temp_ovt[4]; |
| u8 temp_high[4]; |
| u8 temp_hyst[2]; /* 2 hysts stored per reg */ |
| u8 temp_type[4]; |
| u8 temp_status; |
| u8 temp_beep; |
| u8 temp_diode_open; |
| u8 temp_config; |
| u8 pwm[4]; |
| u8 pwm_enable; |
| u8 pwm_auto_point_hyst[2]; |
| u8 pwm_auto_point_mapping[4]; |
| u8 pwm_auto_point_pwm[4][5]; |
| s8 pwm_auto_point_temp[4][4]; |
| }; |
| |
| static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg) |
| { |
| u8 val; |
| |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| val = inb(data->addr + DATA_REG_OFFSET); |
| |
| return val; |
| } |
| |
| static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg) |
| { |
| u16 val; |
| |
| val = f71882fg_read8(data, reg) << 8; |
| val |= f71882fg_read8(data, reg + 1); |
| |
| return val; |
| } |
| |
| static inline int fan_from_reg(u16 reg) |
| { |
| return reg ? (1500000 / reg) : 0; |
| } |
| |
| static inline u16 fan_to_reg(int fan) |
| { |
| return fan ? (1500000 / fan) : 0; |
| } |
| |
| static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val) |
| { |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| outb(val, data->addr + DATA_REG_OFFSET); |
| } |
| |
| static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val) |
| { |
| f71882fg_write8(data, reg, val >> 8); |
| f71882fg_write8(data, reg + 1, val & 0xff); |
| } |
| |
| static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr) |
| { |
| if (data->type == f71858fg) |
| return f71882fg_read16(data, F71882FG_REG_TEMP(nr)); |
| else |
| return f71882fg_read8(data, F71882FG_REG_TEMP(nr)); |
| } |
| |
| static struct f71882fg_data *f71882fg_update_device(struct device *dev) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int nr_fans = f71882fg_nr_fans[data->type]; |
| int nr_temps = f71882fg_nr_temps[data->type]; |
| int nr, reg, point; |
| |
| mutex_lock(&data->update_lock); |
| |
| /* Update once every 60 seconds */ |
| if (time_after(jiffies, data->last_limits + 60 * HZ) || |
| !data->valid) { |
| if (f71882fg_has_in1_alarm[data->type]) { |
| if (data->type == f81866a) { |
| data->in1_max = |
| f71882fg_read8(data, |
| F81866_REG_IN1_HIGH); |
| data->in_beep = |
| f71882fg_read8(data, |
| F81866_REG_IN_BEEP); |
| } else { |
| data->in1_max = |
| f71882fg_read8(data, |
| F71882FG_REG_IN1_HIGH); |
| data->in_beep = |
| f71882fg_read8(data, |
| F71882FG_REG_IN_BEEP); |
| } |
| } |
| |
| /* Get High & boundary temps*/ |
| for (nr = data->temp_start; nr < nr_temps + data->temp_start; |
| nr++) { |
| data->temp_ovt[nr] = f71882fg_read8(data, |
| F71882FG_REG_TEMP_OVT(nr)); |
| data->temp_high[nr] = f71882fg_read8(data, |
| F71882FG_REG_TEMP_HIGH(nr)); |
| } |
| |
| if (data->type != f8000) { |
| data->temp_hyst[0] = f71882fg_read8(data, |
| F71882FG_REG_TEMP_HYST(0)); |
| data->temp_hyst[1] = f71882fg_read8(data, |
| F71882FG_REG_TEMP_HYST(1)); |
| } |
| /* All but the f71858fg / f8000 have this register */ |
| if ((data->type != f71858fg) && (data->type != f8000)) { |
| reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); |
| data->temp_type[1] = (reg & 0x02) ? 2 : 4; |
| data->temp_type[2] = (reg & 0x04) ? 2 : 4; |
| data->temp_type[3] = (reg & 0x08) ? 2 : 4; |
| } |
| |
| if (f71882fg_fan_has_beep[data->type]) |
| data->fan_beep = f71882fg_read8(data, |
| F71882FG_REG_FAN_BEEP); |
| |
| if (f71882fg_temp_has_beep[data->type]) |
| data->temp_beep = f71882fg_read8(data, |
| F71882FG_REG_TEMP_BEEP); |
| |
| data->pwm_enable = f71882fg_read8(data, |
| F71882FG_REG_PWM_ENABLE); |
| data->pwm_auto_point_hyst[0] = |
| f71882fg_read8(data, F71882FG_REG_FAN_HYST(0)); |
| data->pwm_auto_point_hyst[1] = |
| f71882fg_read8(data, F71882FG_REG_FAN_HYST(1)); |
| |
| for (nr = 0; nr < nr_fans; nr++) { |
| data->pwm_auto_point_mapping[nr] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_MAPPING(nr)); |
| |
| switch (data->type) { |
| default: |
| for (point = 0; point < 5; point++) { |
| data->pwm_auto_point_pwm[nr][point] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_PWM |
| (nr, point)); |
| } |
| for (point = 0; point < 4; point++) { |
| data->pwm_auto_point_temp[nr][point] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_TEMP |
| (nr, point)); |
| } |
| break; |
| case f71808e: |
| case f71869: |
| data->pwm_auto_point_pwm[nr][0] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_PWM(nr, 0)); |
| fallthrough; |
| case f71862fg: |
| data->pwm_auto_point_pwm[nr][1] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_PWM |
| (nr, 1)); |
| data->pwm_auto_point_pwm[nr][4] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_PWM |
| (nr, 4)); |
| data->pwm_auto_point_temp[nr][0] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_TEMP |
| (nr, 0)); |
| data->pwm_auto_point_temp[nr][3] = |
| f71882fg_read8(data, |
| F71882FG_REG_POINT_TEMP |
| (nr, 3)); |
| break; |
| } |
| } |
| data->last_limits = jiffies; |
| } |
| |
| /* Update every second */ |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| data->temp_status = f71882fg_read8(data, |
| F71882FG_REG_TEMP_STATUS); |
| data->temp_diode_open = f71882fg_read8(data, |
| F71882FG_REG_TEMP_DIODE_OPEN); |
| for (nr = data->temp_start; nr < nr_temps + data->temp_start; |
| nr++) |
| data->temp[nr] = f71882fg_read_temp(data, nr); |
| |
| data->fan_status = f71882fg_read8(data, |
| F71882FG_REG_FAN_STATUS); |
| for (nr = 0; nr < nr_fans; nr++) { |
| data->fan[nr] = f71882fg_read16(data, |
| F71882FG_REG_FAN(nr)); |
| data->fan_target[nr] = |
| f71882fg_read16(data, F71882FG_REG_FAN_TARGET(nr)); |
| data->fan_full_speed[nr] = |
| f71882fg_read16(data, |
| F71882FG_REG_FAN_FULL_SPEED(nr)); |
| data->pwm[nr] = |
| f71882fg_read8(data, F71882FG_REG_PWM(nr)); |
| } |
| /* Some models have 1 more fan with limited capabilities */ |
| if (data->type == f71808a) { |
| data->fan[2] = f71882fg_read16(data, |
| F71882FG_REG_FAN(2)); |
| data->pwm[2] = f71882fg_read8(data, |
| F71882FG_REG_PWM(2)); |
| } |
| if (data->type == f8000) |
| data->fan[3] = f71882fg_read16(data, |
| F71882FG_REG_FAN(3)); |
| |
| if (f71882fg_has_in1_alarm[data->type]) { |
| if (data->type == f81866a) |
| data->in_status = f71882fg_read8(data, |
| F81866_REG_IN_STATUS); |
| |
| else |
| data->in_status = f71882fg_read8(data, |
| F71882FG_REG_IN_STATUS); |
| } |
| |
| for (nr = 0; nr < F71882FG_MAX_INS; nr++) |
| if (f71882fg_has_in[data->type][nr]) |
| data->in[nr] = f71882fg_read8(data, |
| F71882FG_REG_IN(nr)); |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| return sprintf(buf, "%s\n", f71882fg_names[data->type]); |
| } |
| |
| static DEVICE_ATTR_RO(name); |
| |
| static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int sign, temp; |
| |
| if (data->type == f71858fg) { |
| /* TEMP_TABLE_SEL 1 or 3 ? */ |
| if (data->temp_config & 1) { |
| sign = data->temp[nr] & 0x0001; |
| temp = (data->temp[nr] >> 5) & 0x7ff; |
| } else { |
| sign = data->temp[nr] & 0x8000; |
| temp = (data->temp[nr] >> 5) & 0x3ff; |
| } |
| temp *= 125; |
| if (sign) |
| temp -= 128000; |
| } else { |
| temp = ((s8)data->temp[nr]) * 1000; |
| } |
| |
| return sprintf(buf, "%d\n", temp); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| return sprintf(buf, "%d\n", data->temp_high[nr] * 1000); |
| } |
| |
| static ssize_t store_temp_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 1000; |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val); |
| data->temp_high[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int temp_max_hyst; |
| |
| mutex_lock(&data->update_lock); |
| if (nr & 1) |
| temp_max_hyst = data->temp_hyst[nr / 2] >> 4; |
| else |
| temp_max_hyst = data->temp_hyst[nr / 2] & 0x0f; |
| temp_max_hyst = (data->temp_high[nr] - temp_max_hyst) * 1000; |
| mutex_unlock(&data->update_lock); |
| |
| return sprintf(buf, "%d\n", temp_max_hyst); |
| } |
| |
| static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| ssize_t ret = count; |
| u8 reg; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 1000; |
| |
| mutex_lock(&data->update_lock); |
| |
| /* convert abs to relative and check */ |
| data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr)); |
| val = clamp_val(val, data->temp_high[nr] - 15, data->temp_high[nr]); |
| val = data->temp_high[nr] - val; |
| |
| /* convert value to register contents */ |
| reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST(nr / 2)); |
| if (nr & 1) |
| reg = (reg & 0x0f) | (val << 4); |
| else |
| reg = (reg & 0xf0) | val; |
| f71882fg_write8(data, F71882FG_REG_TEMP_HYST(nr / 2), reg); |
| data->temp_hyst[nr / 2] = reg; |
| |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| |
| static ssize_t show_temp_alarm(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->temp_status & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t show_temp_crit(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| return sprintf(buf, "%d\n", data->temp_ovt[nr] * 1000); |
| } |
| |
| static ssize_t store_temp_crit(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 1000; |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val); |
| data->temp_ovt[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int temp_crit_hyst; |
| |
| mutex_lock(&data->update_lock); |
| if (nr & 1) |
| temp_crit_hyst = data->temp_hyst[nr / 2] >> 4; |
| else |
| temp_crit_hyst = data->temp_hyst[nr / 2] & 0x0f; |
| temp_crit_hyst = (data->temp_ovt[nr] - temp_crit_hyst) * 1000; |
| mutex_unlock(&data->update_lock); |
| |
| return sprintf(buf, "%d\n", temp_crit_hyst); |
| } |
| |
| static ssize_t show_temp_fault(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->temp_diode_open & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| /* |
| * Temp attr for the f71858fg, the f71858fg is special as it has its |
| * temperature indexes start at 0 (the others start at 1) |
| */ |
| static struct sensor_device_attribute_2 f71858fg_temp_attr[] = { |
| SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), |
| SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 0), |
| SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 0), |
| SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0), |
| SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 0), |
| SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 0), |
| SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4), |
| SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0), |
| SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1), |
| SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 1), |
| SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 1), |
| SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1), |
| SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 1), |
| SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 1), |
| SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), |
| SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1), |
| SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2), |
| SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 2), |
| SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 2), |
| SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2), |
| SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 2), |
| SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 2), |
| SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), |
| SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), |
| }; |
| |
| static ssize_t show_temp_type(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| return sprintf(buf, "%d\n", data->temp_type[nr]); |
| } |
| |
| /* Temp attr for the standard models */ |
| static struct sensor_device_attribute_2 fxxxx_temp_attr[3][9] = { { |
| SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1), |
| SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 1), |
| SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 1), |
| /* |
| * Should really be temp1_max_alarm, but older versions did not handle |
| * the max and crit alarms separately and lm_sensors v2 depends on the |
| * presence of temp#_alarm files. The same goes for temp2/3 _alarm. |
| */ |
| SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1), |
| SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 1), |
| SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 1), |
| SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), |
| SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1), |
| SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1), |
| }, { |
| SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2), |
| SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 2), |
| SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 2), |
| /* Should be temp2_max_alarm, see temp1_alarm note */ |
| SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2), |
| SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 2), |
| SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 2), |
| SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), |
| SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2), |
| SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), |
| }, { |
| SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3), |
| SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 3), |
| SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, |
| store_temp_max_hyst, 0, 3), |
| /* Should be temp3_max_alarm, see temp1_alarm note */ |
| SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3), |
| SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 3), |
| SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, |
| 0, 3), |
| SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7), |
| SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3), |
| SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3), |
| } }; |
| |
| static ssize_t show_temp_beep(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->temp_beep & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t store_temp_beep(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| unsigned long val; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP); |
| if (val) |
| data->temp_beep |= 1 << nr; |
| else |
| data->temp_beep &= ~(1 << nr); |
| |
| f71882fg_write8(data, F71882FG_REG_TEMP_BEEP, data->temp_beep); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* Temp attr for models which can beep on temp alarm */ |
| static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { { |
| SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 1), |
| SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 5), |
| }, { |
| SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 2), |
| SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 6), |
| }, { |
| SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 3), |
| SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 7), |
| } }; |
| |
| static struct sensor_device_attribute_2 f81866_temp_beep_attr[3][2] = { { |
| SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 0), |
| SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 4), |
| }, { |
| SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 1), |
| SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 5), |
| }, { |
| SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 2), |
| SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, |
| store_temp_beep, 0, 6), |
| } }; |
| |
| /* |
| * Temp attr for the f8000 |
| * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) |
| * is used as hysteresis value to clear alarms |
| * Also like the f71858fg its temperature indexes start at 0 |
| */ |
| static struct sensor_device_attribute_2 f8000_temp_attr[] = { |
| SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), |
| SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 0), |
| SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 0), |
| SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4), |
| SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0), |
| SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1), |
| SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 1), |
| SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 1), |
| SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), |
| SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1), |
| SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2), |
| SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit, |
| store_temp_crit, 0, 2), |
| SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, |
| store_temp_max, 0, 2), |
| SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), |
| SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), |
| }; |
| |
| static ssize_t show_in(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| return sprintf(buf, "%d\n", data->in[nr] * 8); |
| } |
| |
| /* in attr for all models */ |
| static struct sensor_device_attribute_2 fxxxx_in_attr[] = { |
| SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), |
| SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), |
| SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), |
| SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3), |
| SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4), |
| SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5), |
| SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), |
| SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), |
| SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), |
| SENSOR_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 0, 9), |
| SENSOR_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 0, 10), |
| }; |
| |
| static ssize_t show_in_max(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| |
| return sprintf(buf, "%d\n", data->in1_max * 8); |
| } |
| |
| static ssize_t store_in_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 8; |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| if (data->type == f81866a) |
| f71882fg_write8(data, F81866_REG_IN1_HIGH, val); |
| else |
| f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); |
| data->in1_max = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_in_beep(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->in_beep & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t store_in_beep(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| unsigned long val; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| if (data->type == f81866a) |
| data->in_beep = f71882fg_read8(data, F81866_REG_IN_BEEP); |
| else |
| data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); |
| |
| if (val) |
| data->in_beep |= 1 << nr; |
| else |
| data->in_beep &= ~(1 << nr); |
| |
| if (data->type == f81866a) |
| f71882fg_write8(data, F81866_REG_IN_BEEP, data->in_beep); |
| else |
| f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_in_alarm(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->in_status & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| /* For models with in1 alarm capability */ |
| static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = { |
| SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, |
| 0, 1), |
| SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, |
| 0, 1), |
| SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1), |
| }; |
| |
| static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int speed = fan_from_reg(data->fan[nr]); |
| |
| if (speed == FAN_MIN_DETECT) |
| speed = 0; |
| |
| return sprintf(buf, "%d\n", speed); |
| } |
| |
| static ssize_t show_fan_full_speed(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int speed = fan_from_reg(data->fan_full_speed[nr]); |
| return sprintf(buf, "%d\n", speed); |
| } |
| |
| static ssize_t store_fan_full_speed(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val = clamp_val(val, 23, 1500000); |
| val = fan_to_reg(val); |
| |
| mutex_lock(&data->update_lock); |
| f71882fg_write16(data, F71882FG_REG_FAN_FULL_SPEED(nr), val); |
| data->fan_full_speed[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_fan_alarm(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->fan_status & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t show_pwm(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int val, nr = to_sensor_dev_attr_2(devattr)->index; |
| mutex_lock(&data->update_lock); |
| if (data->pwm_enable & (1 << (2 * nr))) |
| /* PWM mode */ |
| val = data->pwm[nr]; |
| else { |
| /* RPM mode */ |
| val = 255 * fan_from_reg(data->fan_target[nr]) |
| / fan_from_reg(data->fan_full_speed[nr]); |
| } |
| mutex_unlock(&data->update_lock); |
| return sprintf(buf, "%d\n", val); |
| } |
| |
| static ssize_t store_pwm(struct device *dev, |
| struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); |
| if ((data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 3) != 2) || |
| (data->type != f8000 && !((data->pwm_enable >> 2 * nr) & 2))) { |
| count = -EROFS; |
| goto leave; |
| } |
| if (data->pwm_enable & (1 << (2 * nr))) { |
| /* PWM mode */ |
| f71882fg_write8(data, F71882FG_REG_PWM(nr), val); |
| data->pwm[nr] = val; |
| } else { |
| /* RPM mode */ |
| int target, full_speed; |
| full_speed = f71882fg_read16(data, |
| F71882FG_REG_FAN_FULL_SPEED(nr)); |
| target = fan_to_reg(val * fan_from_reg(full_speed) / 255); |
| f71882fg_write16(data, F71882FG_REG_FAN_TARGET(nr), target); |
| data->fan_target[nr] = target; |
| data->fan_full_speed[nr] = full_speed; |
| } |
| leave: |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_enable(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int result = 0; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| switch ((data->pwm_enable >> 2 * nr) & 3) { |
| case 0: |
| case 1: |
| result = 2; /* Normal auto mode */ |
| break; |
| case 2: |
| result = 1; /* Manual mode */ |
| break; |
| case 3: |
| if (data->type == f8000) |
| result = 3; /* Thermostat mode */ |
| else |
| result = 1; /* Manual mode */ |
| break; |
| } |
| |
| return sprintf(buf, "%d\n", result); |
| } |
| |
| static ssize_t store_pwm_enable(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| /* Special case for F8000 pwm channel 3 which only does auto mode */ |
| if (data->type == f8000 && nr == 2 && val != 2) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); |
| /* Special case for F8000 auto PWM mode / Thermostat mode */ |
| if (data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 1)) { |
| switch (val) { |
| case 2: |
| data->pwm_enable &= ~(2 << (2 * nr)); |
| break; /* Normal auto mode */ |
| case 3: |
| data->pwm_enable |= 2 << (2 * nr); |
| break; /* Thermostat mode */ |
| default: |
| count = -EINVAL; |
| goto leave; |
| } |
| } else { |
| switch (val) { |
| case 1: |
| /* The f71858fg does not support manual RPM mode */ |
| if (data->type == f71858fg && |
| ((data->pwm_enable >> (2 * nr)) & 1)) { |
| count = -EINVAL; |
| goto leave; |
| } |
| data->pwm_enable |= 2 << (2 * nr); |
| break; /* Manual */ |
| case 2: |
| data->pwm_enable &= ~(2 << (2 * nr)); |
| break; /* Normal auto mode */ |
| default: |
| count = -EINVAL; |
| goto leave; |
| } |
| } |
| f71882fg_write8(data, F71882FG_REG_PWM_ENABLE, data->pwm_enable); |
| leave: |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_interpolate(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int result; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| result = (data->pwm_auto_point_mapping[nr] >> 4) & 1; |
| |
| return sprintf(buf, "%d\n", result); |
| } |
| |
| static ssize_t store_pwm_interpolate(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| unsigned long val; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_auto_point_mapping[nr] = |
| f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); |
| if (val) |
| val = data->pwm_auto_point_mapping[nr] | (1 << 4); |
| else |
| val = data->pwm_auto_point_mapping[nr] & (~(1 << 4)); |
| f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); |
| data->pwm_auto_point_mapping[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* Fan / PWM attr common to all models */ |
| static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { { |
| SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0), |
| SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR, |
| show_fan_full_speed, |
| store_fan_full_speed, 0, 0), |
| SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0), |
| SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0), |
| SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, |
| store_pwm_enable, 0, 0), |
| SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR, |
| show_pwm_interpolate, store_pwm_interpolate, 0, 0), |
| }, { |
| SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1), |
| SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR, |
| show_fan_full_speed, |
| store_fan_full_speed, 0, 1), |
| SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1), |
| SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1), |
| SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, |
| store_pwm_enable, 0, 1), |
| SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR, |
| show_pwm_interpolate, store_pwm_interpolate, 0, 1), |
| }, { |
| SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), |
| SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR, |
| show_fan_full_speed, |
| store_fan_full_speed, 0, 2), |
| SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), |
| SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), |
| SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, |
| store_pwm_enable, 0, 2), |
| SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR, |
| show_pwm_interpolate, store_pwm_interpolate, 0, 2), |
| }, { |
| SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), |
| SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR, |
| show_fan_full_speed, |
| store_fan_full_speed, 0, 3), |
| SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3), |
| SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3), |
| SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable, |
| store_pwm_enable, 0, 3), |
| SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR, |
| show_pwm_interpolate, store_pwm_interpolate, 0, 3), |
| } }; |
| |
| static ssize_t show_simple_pwm(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int val, nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| val = data->pwm[nr]; |
| return sprintf(buf, "%d\n", val); |
| } |
| |
| static ssize_t store_simple_pwm(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| f71882fg_write8(data, F71882FG_REG_PWM(nr), val); |
| data->pwm[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* Attr for the third fan of the f71808a, which only has manual pwm */ |
| static struct sensor_device_attribute_2 f71808a_fan3_attr[] = { |
| SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), |
| SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), |
| SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, |
| show_simple_pwm, store_simple_pwm, 0, 2), |
| }; |
| |
| static ssize_t show_fan_beep(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| if (data->fan_beep & (1 << nr)) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t store_fan_beep(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| unsigned long val; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); |
| if (val) |
| data->fan_beep |= 1 << nr; |
| else |
| data->fan_beep &= ~(1 << nr); |
| |
| f71882fg_write8(data, F71882FG_REG_FAN_BEEP, data->fan_beep); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* Attr for models which can beep on Fan alarm */ |
| static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = { |
| SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, |
| store_fan_beep, 0, 0), |
| SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, |
| store_fan_beep, 0, 1), |
| SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, |
| store_fan_beep, 0, 2), |
| SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, |
| store_fan_beep, 0, 3), |
| }; |
| |
| static ssize_t show_pwm_auto_point_channel(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| int result; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| |
| result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - |
| data->temp_start); |
| |
| return sprintf(buf, "%d\n", result); |
| } |
| |
| static ssize_t store_pwm_auto_point_channel(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| switch (val) { |
| case 1: |
| val = 0; |
| break; |
| case 2: |
| val = 1; |
| break; |
| case 4: |
| val = 2; |
| break; |
| default: |
| return -EINVAL; |
| } |
| val += data->temp_start; |
| mutex_lock(&data->update_lock); |
| data->pwm_auto_point_mapping[nr] = |
| f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); |
| val = (data->pwm_auto_point_mapping[nr] & 0xfc) | val; |
| f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); |
| data->pwm_auto_point_mapping[nr] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_point_pwm(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| int result; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int pwm = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| |
| mutex_lock(&data->update_lock); |
| if (data->pwm_enable & (1 << (2 * pwm))) { |
| /* PWM mode */ |
| result = data->pwm_auto_point_pwm[pwm][point]; |
| } else { |
| /* RPM mode */ |
| result = 32 * 255 / (32 + data->pwm_auto_point_pwm[pwm][point]); |
| } |
| mutex_unlock(&data->update_lock); |
| |
| return sprintf(buf, "%d\n", result); |
| } |
| |
| static ssize_t store_pwm_auto_point_pwm(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, pwm = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val = clamp_val(val, 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); |
| if (data->pwm_enable & (1 << (2 * pwm))) { |
| /* PWM mode */ |
| } else { |
| /* RPM mode */ |
| if (val < 29) /* Prevent negative numbers */ |
| val = 255; |
| else |
| val = (255 - val) * 32 / val; |
| } |
| f71882fg_write8(data, F71882FG_REG_POINT_PWM(pwm, point), val); |
| data->pwm_auto_point_pwm[pwm][point] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_point_temp(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| int result; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int pwm = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| |
| result = data->pwm_auto_point_temp[pwm][point]; |
| return sprintf(buf, "%d\n", 1000 * result); |
| } |
| |
| static ssize_t store_pwm_auto_point_temp(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, pwm = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 1000; |
| |
| if (data->auto_point_temp_signed) |
| val = clamp_val(val, -128, 127); |
| else |
| val = clamp_val(val, 0, 127); |
| |
| mutex_lock(&data->update_lock); |
| f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val); |
| data->pwm_auto_point_temp[pwm][point] = val; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| int result = 0; |
| struct f71882fg_data *data = f71882fg_update_device(dev); |
| int nr = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| |
| mutex_lock(&data->update_lock); |
| if (nr & 1) |
| result = data->pwm_auto_point_hyst[nr / 2] >> 4; |
| else |
| result = data->pwm_auto_point_hyst[nr / 2] & 0x0f; |
| result = 1000 * (data->pwm_auto_point_temp[nr][point] - result); |
| mutex_unlock(&data->update_lock); |
| |
| return sprintf(buf, "%d\n", result); |
| } |
| |
| static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71882fg_data *data = dev_get_drvdata(dev); |
| int err, nr = to_sensor_dev_attr_2(devattr)->index; |
| int point = to_sensor_dev_attr_2(devattr)->nr; |
| u8 reg; |
| long val; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| val /= 1000; |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_auto_point_temp[nr][point] = |
| f71882fg_read8(data, F71882FG_REG_POINT_TEMP(nr, point)); |
| val = clamp_val(val, data->pwm_auto_point_temp[nr][point] - 15, |
| data->pwm_auto_point_temp[nr][point]); |
| val = data->pwm_auto_point_temp[nr][point] - val; |
| |
| reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2)); |
| if (nr & 1) |
| reg = (reg & 0x0f) | (val << 4); |
| else |
| reg = (reg & 0xf0) | val; |
| |
| f71882fg_write8(data, F71882FG_REG_FAN_HYST(nr / 2), reg); |
| data->pwm_auto_point_hyst[nr / 2] = reg; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| /* |
| * PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the |
| * standard models |
| */ |
| static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[3][7] = { { |
| SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 0), |
| }, { |
| SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 1), |
| }, { |
| SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 2), |
| } }; |
| |
| /* |
| * PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the |
| * pwm setting when the temperature is above the pwmX_auto_point1_temp can be |
| * programmed instead of being hardcoded to 0xff |
| */ |
| static struct sensor_device_attribute_2 f71869_auto_pwm_attr[3][8] = { { |
| SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 0), |
| SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 0), |
| }, { |
| SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 1), |
| SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 1), |
| }, { |
| SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 2), |
| SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 2), |
| } }; |
| |
| /* PWM attr for the standard models */ |
| static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { { |
| SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 0), |
| SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 0), |
| SENSOR_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 0), |
| SENSOR_ATTR_2(pwm1_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 0), |
| SENSOR_ATTR_2(pwm1_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 0), |
| SENSOR_ATTR_2(pwm1_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 0), |
| SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 0), |
| SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 0), |
| SENSOR_ATTR_2(pwm1_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 0), |
| SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 0), |
| }, { |
| SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 1), |
| SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 1), |
| SENSOR_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 1), |
| SENSOR_ATTR_2(pwm2_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 1), |
| SENSOR_ATTR_2(pwm2_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 1), |
| SENSOR_ATTR_2(pwm2_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 1), |
| SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 1), |
| SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 1), |
| SENSOR_ATTR_2(pwm2_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 1), |
| SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 1), |
| }, { |
| SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 2), |
| SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 2), |
| SENSOR_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 2), |
| SENSOR_ATTR_2(pwm3_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 2), |
| SENSOR_ATTR_2(pwm3_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 2), |
| SENSOR_ATTR_2(pwm3_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 2), |
| SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 2), |
| SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 2), |
| SENSOR_ATTR_2(pwm3_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 2), |
| SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 2), |
| }, { |
| SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 3), |
| SENSOR_ATTR_2(pwm4_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 3), |
| SENSOR_ATTR_2(pwm4_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 3), |
| SENSOR_ATTR_2(pwm4_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 3), |
| SENSOR_ATTR_2(pwm4_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 3), |
| SENSOR_ATTR_2(pwm4_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 3), |
| SENSOR_ATTR_2(pwm4_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 3), |
| SENSOR_ATTR_2(pwm4_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 3), |
| SENSOR_ATTR_2(pwm4_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 3), |
| SENSOR_ATTR_2(pwm4_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 3), |
| SENSOR_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 3), |
| SENSOR_ATTR_2(pwm4_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 3), |
| SENSOR_ATTR_2(pwm4_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 3), |
| SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 3), |
| } }; |
| |
| /* Fan attr specific to the f8000 (4th fan input can only measure speed) */ |
| static struct sensor_device_attribute_2 f8000_fan_attr[] = { |
| SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), |
| }; |
| |
| /* |
| * PWM attr for the f8000, zones mapped to temp instead of to pwm! |
| * Also the register block at offset A0 maps to TEMP1 (so our temp2, as the |
| * F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 |
| */ |
| static struct sensor_device_attribute_2 f8000_auto_pwm_attr[3][14] = { { |
| SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 0), |
| SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 2), |
| SENSOR_ATTR_2(temp1_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 2), |
| SENSOR_ATTR_2(temp1_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 2), |
| SENSOR_ATTR_2(temp1_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 2), |
| SENSOR_ATTR_2(temp1_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 2), |
| SENSOR_ATTR_2(temp1_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 2), |
| SENSOR_ATTR_2(temp1_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 2), |
| SENSOR_ATTR_2(temp1_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 2), |
| SENSOR_ATTR_2(temp1_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 2), |
| SENSOR_ATTR_2(temp1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 2), |
| SENSOR_ATTR_2(temp1_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 2), |
| SENSOR_ATTR_2(temp1_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 2), |
| SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 2), |
| }, { |
| SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 1), |
| SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 0), |
| SENSOR_ATTR_2(temp2_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 0), |
| SENSOR_ATTR_2(temp2_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 0), |
| SENSOR_ATTR_2(temp2_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 0), |
| SENSOR_ATTR_2(temp2_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 0), |
| SENSOR_ATTR_2(temp2_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 0), |
| SENSOR_ATTR_2(temp2_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 0), |
| SENSOR_ATTR_2(temp2_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 0), |
| SENSOR_ATTR_2(temp2_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 0), |
| SENSOR_ATTR_2(temp2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 0), |
| SENSOR_ATTR_2(temp2_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 0), |
| SENSOR_ATTR_2(temp2_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 0), |
| SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 0), |
| }, { |
| SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_channel, |
| store_pwm_auto_point_channel, 0, 2), |
| SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 0, 1), |
| SENSOR_ATTR_2(temp3_auto_point2_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 1, 1), |
| SENSOR_ATTR_2(temp3_auto_point3_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 2, 1), |
| SENSOR_ATTR_2(temp3_auto_point4_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 3, 1), |
| SENSOR_ATTR_2(temp3_auto_point5_pwm, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, |
| 4, 1), |
| SENSOR_ATTR_2(temp3_auto_point1_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 0, 1), |
| SENSOR_ATTR_2(temp3_auto_point2_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 1, 1), |
| SENSOR_ATTR_2(temp3_auto_point3_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 2, 1), |
| SENSOR_ATTR_2(temp3_auto_point4_temp, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp, store_pwm_auto_point_temp, |
| 3, 1), |
| SENSOR_ATTR_2(temp3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, |
| show_pwm_auto_point_temp_hyst, |
| store_pwm_auto_point_temp_hyst, |
| 0, 1), |
| SENSOR_ATTR_2(temp3_auto_point2_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 1, 1), |
| SENSOR_ATTR_2(temp3_auto_point3_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 2, 1), |
| SENSOR_ATTR_2(temp3_auto_point4_temp_hyst, S_IRUGO, |
| show_pwm_auto_point_temp_hyst, NULL, 3, 1), |
| } }; |
| |
| /* Super I/O functions */ |
| static inline int superio_inb(int base, int reg) |
| { |
| outb(reg, base); |
| return inb(base + 1); |
| } |
| |
| static int superio_inw(int base, int reg) |
| { |
| int val; |
| val = superio_inb(base, reg) << 8; |
| val |= superio_inb(base, reg + 1); |
| return val; |
| } |
| |
| static inline int superio_enter(int base) |
| { |
| /* Don't step on other drivers' I/O space by accident */ |
| if (!request_muxed_region(base, 2, DRVNAME)) { |
| pr_err("I/O address 0x%04x already in use\n", base); |
| return -EBUSY; |
| } |
| |
| /* according to the datasheet the key must be send twice! */ |
| outb(SIO_UNLOCK_KEY, base); |
| outb(SIO_UNLOCK_KEY, base); |
| |
| return 0; |
| } |
| |
| static inline void superio_select(int base, int ld) |
| { |
| outb(SIO_REG_LDSEL, base); |
| outb(ld, base + 1); |
| } |
| |
| static inline void superio_exit(int base) |
| { |
| outb(SIO_LOCK_KEY, base); |
| release_region(base, 2); |
| } |
| |
| static int f71882fg_create_sysfs_files(struct platform_device *pdev, |
| struct sensor_device_attribute_2 *attr, int count) |
| { |
| int err, i; |
| |
| for (i = 0; i < count; i++) { |
| err = device_create_file(&pdev->dev, &attr[i].dev_attr); |
| if (err) |
| return err; |
| } |
| return 0; |
| } |
| |
| static void f71882fg_remove_sysfs_files(struct platform_device *pdev, |
| struct sensor_device_attribute_2 *attr, int count) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) |
| device_remove_file(&pdev->dev, &attr[i].dev_attr); |
| } |
| |
| static int f71882fg_create_fan_sysfs_files( |
| struct platform_device *pdev, int idx) |
| { |
| struct f71882fg_data *data = platform_get_drvdata(pdev); |
| int err; |
| |
| /* Sanity check the pwm setting */ |
| err = 0; |
| switch (data->type) { |
| case f71858fg: |
| if (((data->pwm_enable >> (idx * 2)) & 3) == 3) |
| err = 1; |
| break; |
| case f71862fg: |
| if (((data->pwm_enable >> (idx * 2)) & 1) != 1) |
| err = 1; |
| break; |
| case f8000: |
| if (idx == 2) |
| err = data->pwm_enable & 0x20; |
| break; |
| default: |
| break; |
| } |
| if (err) { |
| dev_err(&pdev->dev, |
| "Invalid (reserved) pwm settings: 0x%02x, " |
| "skipping fan %d\n", |
| (data->pwm_enable >> (idx * 2)) & 3, idx + 1); |
| return 0; /* This is a non fatal condition */ |
| } |
| |
| err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[idx][0], |
| ARRAY_SIZE(fxxxx_fan_attr[0])); |
| if (err) |
| return err; |
| |
| if (f71882fg_fan_has_beep[data->type]) { |
| err = f71882fg_create_sysfs_files(pdev, |
| &fxxxx_fan_beep_attr[idx], |
| 1); |
| if (err) |
| return err; |
| } |
| |
| dev_info(&pdev->dev, "Fan: %d is in %s mode\n", idx + 1, |
| (data->pwm_enable & (1 << (2 * idx))) ? "duty-cycle" : "RPM"); |
| |
| /* Check for unsupported auto pwm settings */ |
| switch (data->type) { |
| case f71808e: |
| case f71808a: |
| case f71869: |
| case f71869a: |
| case f71889fg: |
| case f71889ed: |
| case f71889a: |
| data->pwm_auto_point_mapping[idx] = |
| f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(idx)); |
| if ((data->pwm_auto_point_mapping[idx] & 0x80) || |
| (data->pwm_auto_point_mapping[idx] & 3) == 0) { |
| dev_warn(&pdev->dev, |
| "Auto pwm controlled by raw digital " |
| "data, disabling pwm auto_point " |
| "sysfs attributes for fan %d\n", idx + 1); |
| return 0; /* This is a non fatal condition */ |
| } |
| break; |
| default: |
| break; |
| } |
| |
| switch (data->type) { |
| case f71862fg: |
| err = f71882fg_create_sysfs_files(pdev, |
| &f71862fg_auto_pwm_attr[idx][0], |
| ARRAY_SIZE(f71862fg_auto_pwm_attr[0])); |
| break; |
| case f71808e: |
| case f71869: |
| err = f71882fg_create_sysfs_files(pdev, |
| &f71869_auto_pwm_attr[idx][0], |
| ARRAY_SIZE(f71869_auto_pwm_attr[0])); |
| break; |
| case f8000: |
| err = f71882fg_create_sysfs_files(pdev, |
| &f8000_auto_pwm_attr[idx][0], |
| ARRAY_SIZE(f8000_auto_pwm_attr[0])); |
| break; |
| default: |
| err = f71882fg_create_sysfs_files(pdev, |
| &fxxxx_auto_pwm_attr[idx][0], |
| ARRAY_SIZE(fxxxx_auto_pwm_attr[0])); |
| } |
| |
| return err; |
| } |
| |
| static int f71882fg_remove(struct platform_device *pdev) |
| { |
| struct f71882fg_data *data = platform_get_drvdata(pdev); |
| int nr_fans = f71882fg_nr_fans[data->type]; |
| int nr_temps = f71882fg_nr_temps[data->type]; |
| int i; |
| u8 start_reg = f71882fg_read8(data, F71882FG_REG_START); |
| |
| if (data->hwmon_dev) |
| hwmon_device_unregister(data->hwmon_dev); |
| |
| device_remove_file(&pdev->dev, &dev_attr_name); |
| |
| if (start_reg & 0x01) { |
| switch (data->type) { |
| case f71858fg: |
| if (data->temp_config & 0x10) |
| f71882fg_remove_sysfs_files(pdev, |
| f8000_temp_attr, |
| ARRAY_SIZE(f8000_temp_attr)); |
| else |
| f71882fg_remove_sysfs_files(pdev, |
| f71858fg_temp_attr, |
| ARRAY_SIZE(f71858fg_temp_attr)); |
| break; |
| case f8000: |
| f71882fg_remove_sysfs_files(pdev, |
| f8000_temp_attr, |
| ARRAY_SIZE(f8000_temp_attr)); |
| break; |
| case f81866a: |
| f71882fg_remove_sysfs_files(pdev, |
| f71858fg_temp_attr, |
| ARRAY_SIZE(f71858fg_temp_attr)); |
| break; |
| default: |
| f71882fg_remove_sysfs_files(pdev, |
| &fxxxx_temp_attr[0][0], |
| ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps); |
| } |
| if (f71882fg_temp_has_beep[data->type]) { |
| if (data->type == f81866a) |
| f71882fg_remove_sysfs_files(pdev, |
| &f81866_temp_beep_attr[0][0], |
| ARRAY_SIZE(f81866_temp_beep_attr[0]) |
| * nr_temps); |
| else |
| f71882fg_remove_sysfs_files(pdev, |
| &fxxxx_temp_beep_attr[0][0], |
| ARRAY_SIZE(fxxxx_temp_beep_attr[0]) |
| * nr_temps); |
| } |
| |
| for (i = 0; i < F71882FG_MAX_INS; i++) { |
| if (f71882fg_has_in[data->type][i]) { |
| device_remove_file(&pdev->dev, |
| &fxxxx_in_attr[i].dev_attr); |
| } |
| } |
| if (f71882fg_has_in1_alarm[data->type]) { |
| f71882fg_remove_sysfs_files(pdev, |
| fxxxx_in1_alarm_attr, |
| ARRAY_SIZE(fxxxx_in1_alarm_attr)); |
| } |
| } |
| |
| if (start_reg & 0x02) { |
| f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0], |
| ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans); |
| |
| if (f71882fg_fan_has_beep[data->type]) { |
| f71882fg_remove_sysfs_files(pdev, |
| fxxxx_fan_beep_attr, nr_fans); |
| } |
| |
| switch (data->type) { |
| case f71808a: |
| f71882fg_remove_sysfs_files(pdev, |
| &fxxxx_auto_pwm_attr[0][0], |
| ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans); |
| f71882fg_remove_sysfs_files(pdev, |
| f71808a_fan3_attr, |
| ARRAY_SIZE(f71808a_fan3_attr)); |
| break; |
| case f71862fg: |
| f71882fg_remove_sysfs_files(pdev, |
| &f71862fg_auto_pwm_attr[0][0], |
| ARRAY_SIZE(f71862fg_auto_pwm_attr[0]) * |
| nr_fans); |
| break; |
| case f71808e: |
| case f71869: |
| f71882fg_remove_sysfs_files(pdev, |
| &f71869_auto_pwm_attr[0][0], |
| ARRAY_SIZE(f71869_auto_pwm_attr[0]) * nr_fans); |
| break; |
| case f8000: |
| f71882fg_remove_sysfs_files(pdev, |
| f8000_fan_attr, |
| ARRAY_SIZE(f8000_fan_attr)); |
| f71882fg_remove_sysfs_files(pdev, |
| &f8000_auto_pwm_attr[0][0], |
| ARRAY_SIZE(f8000_auto_pwm_attr[0]) * nr_fans); |
| break; |
| default: |
| f71882fg_remove_sysfs_files(pdev, |
| &fxxxx_auto_pwm_attr[0][0], |
| ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans); |
| } |
| } |
| return 0; |
| } |
| |
| static int f71882fg_probe(struct platform_device *pdev) |
| { |
| struct f71882fg_data *data; |
| struct f71882fg_sio_data *sio_data = dev_get_platdata(&pdev->dev); |
| int nr_fans = f71882fg_nr_fans[sio_data->type]; |
| int nr_temps = f71882fg_nr_temps[sio_data->type]; |
| int err, i; |
| int size; |
| u8 start_reg, reg; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct f71882fg_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; |
| data->type = sio_data->type; |
| data->temp_start = |
| (data->type == f71858fg || data->type == f8000 || |
| data->type == f81866a) ? 0 : 1; |
| mutex_init(&data->update_lock); |
| platform_set_drvdata(pdev, data); |
| |
| start_reg = f71882fg_read8(data, F71882FG_REG_START); |
| if (start_reg & 0x04) { |
| dev_warn(&pdev->dev, "Hardware monitor is powered down\n"); |
| return -ENODEV; |
| } |
| if (!(start_reg & 0x03)) { |
| dev_warn(&pdev->dev, "Hardware monitoring not activated\n"); |
| return -ENODEV; |
| } |
| |
| /* Register sysfs interface files */ |
| err = device_create_file(&pdev->dev, &dev_attr_name); |
| if (err) |
| goto exit_unregister_sysfs; |
| |
| if (start_reg & 0x01) { |
| switch (data->type) { |
| case f71858fg: |
| data->temp_config = |
| f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG); |
| if (data->temp_config & 0x10) |
| /* |
| * The f71858fg temperature alarms behave as |
| * the f8000 alarms in this mode |
| */ |
| err = f71882fg_create_sysfs_files(pdev, |
| f8000_temp_attr, |
| ARRAY_SIZE(f8000_temp_attr)); |
| else |
| err = f71882fg_create_sysfs_files(pdev, |
| f71858fg_temp_attr, |
| ARRAY_SIZE(f71858fg_temp_attr)); |
| break; |
| case f8000: |
| err = f71882fg_create_sysfs_files(pdev, |
| f8000_temp_attr, |
| ARRAY_SIZE(f8000_temp_attr)); |
| break; |
| case f81866a: |
| err = f71882fg_create_sysfs_files(pdev, |
| f71858fg_temp_attr, |
| ARRAY_SIZE(f71858fg_temp_attr)); |
| break; |
| default: |
| err = f71882fg_create_sysfs_files(pdev, |
| &fxxxx_temp_attr[0][0], |
| ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps); |
| } |
| if (err) |
| goto exit_unregister_sysfs; |
| |
| if (f71882fg_temp_has_beep[data->type]) { |
| if (data->type == f81866a) { |
| size = ARRAY_SIZE(f81866_temp_beep_attr[0]); |
| err = f71882fg_create_sysfs_files(pdev, |
| &f81866_temp_beep_attr[0][0], |
| size * nr_temps); |
| |
| } else { |
| size = ARRAY_SIZE(fxxxx_temp_beep_attr[0]); |
| err = f71882fg_create_sysfs_files(pdev, |
| &fxxxx_temp_beep_attr[0][0], |
| size * nr_temps); |
| } |
| if (err) |
| goto exit_unregister_sysfs; |
| } |
| |
| for (i = 0; i < F71882FG_MAX_INS; i++) { |
| if (f71882fg_has_in[data->type][i]) { |
| err = device_create_file(&pdev->dev, |
| &fxxxx_in_attr[i].dev_attr); |
| if (err) |
| goto exit_unregister_sysfs; |
| } |
| } |
| if (f71882fg_has_in1_alarm[data->type]) { |
| err = f71882fg_create_sysfs_files(pdev, |
| fxxxx_in1_alarm_attr, |
| ARRAY_SIZE(fxxxx_in1_alarm_attr)); |
| if (err) |
| goto exit_unregister_sysfs; |
| } |
| } |
| |
| if (start_reg & 0x02) { |
| switch (data->type) { |
| case f71808e: |
| case f71808a: |
| case f71869: |
| case f71869a: |
| /* These always have signed auto point temps */ |
| data->auto_point_temp_signed = 1; |
| fallthrough; /* to select correct fan/pwm reg bank! */ |
| case f71889fg: |
| case f71889ed: |
| case f71889a: |
| reg = f71882fg_read8(data, F71882FG_REG_FAN_FAULT_T); |
| if (reg & F71882FG_FAN_NEG_TEMP_EN) |
| data->auto_point_temp_signed = 1; |
| /* Ensure banked pwm registers point to right bank */ |
| reg &= ~F71882FG_FAN_PROG_SEL; |
| f71882fg_write8(data, F71882FG_REG_FAN_FAULT_T, reg); |
| break; |
| default: |
| break; |
| } |
| |
| data->pwm_enable = |
| f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); |
| |
| for (i = 0; i < nr_fans; i++) { |
| err = f71882fg_create_fan_sysfs_files(pdev, i); |
| if (err) |
| goto exit_unregister_sysfs; |
| } |
| |
| /* Some types have 1 extra fan with limited functionality */ |
| switch (data->type) { |
| case f71808a: |
| err = f71882fg_create_sysfs_files(pdev, |
| f71808a_fan3_attr, |
| ARRAY_SIZE(f71808a_fan3_attr)); |
| break; |
| case f8000: |
| err = f71882fg_create_sysfs_files(pdev, |
| f8000_fan_attr, |
| ARRAY_SIZE(f8000_fan_attr)); |
| break; |
| default: |
| break; |
| } |
| if (err) |
| goto exit_unregister_sysfs; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| data->hwmon_dev = NULL; |
| goto exit_unregister_sysfs; |
| } |
| |
| return 0; |
| |
| exit_unregister_sysfs: |
| f71882fg_remove(pdev); /* Will unregister the sysfs files for us */ |
| return err; /* f71882fg_remove() also frees our data */ |
| } |
| |
| static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data) |
| { |
| u16 devid; |
| unsigned short address; |
| int err = superio_enter(sioaddr); |
| if (err) |
| return err; |
| |
| devid = superio_inw(sioaddr, SIO_REG_MANID); |
| if (devid != SIO_FINTEK_ID) { |
| pr_debug("Not a Fintek device\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); |
| switch (devid) { |
| case SIO_F71808E_ID: |
| sio_data->type = f71808e; |
| break; |
| case SIO_F71808A_ID: |
| sio_data->type = f71808a; |
| break; |
| case SIO_F71858_ID: |
| case SIO_F71858AD_ID: |
| sio_data->type = f71858fg; |
| break; |
| case SIO_F71862_ID: |
| sio_data->type = f71862fg; |
| break; |
| case SIO_F71868_ID: |
| sio_data->type = f71868a; |
| break; |
| case SIO_F71869_ID: |
| sio_data->type = f71869; |
| break; |
| case SIO_F71869A_ID: |
| sio_data->type = f71869a; |
| break; |
| case SIO_F71882_ID: |
| sio_data->type = f71882fg; |
| break; |
| case SIO_F71889_ID: |
| sio_data->type = f71889fg; |
| break; |
| case SIO_F71889E_ID: |
| sio_data->type = f71889ed; |
| break; |
| case SIO_F71889A_ID: |
| sio_data->type = f71889a; |
| break; |
| case SIO_F8000_ID: |
| sio_data->type = f8000; |
| break; |
| case SIO_F81768D_ID: |
| sio_data->type = f81768d; |
| break; |
| case SIO_F81865_ID: |
| sio_data->type = f81865f; |
| break; |
| case SIO_F81866_ID: |
| case SIO_F81966_ID: |
| sio_data->type = f81866a; |
| break; |
| default: |
| pr_info("Unsupported Fintek device: %04x\n", |
| (unsigned int)devid); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| if (sio_data->type == f71858fg) |
| superio_select(sioaddr, SIO_F71858FG_LD_HWM); |
| else |
| superio_select(sioaddr, SIO_F71882FG_LD_HWM); |
| |
| if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { |
| pr_warn("Device not activated\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| address = superio_inw(sioaddr, SIO_REG_ADDR); |
| if (address == 0) { |
| pr_warn("Base address not set\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */ |
| |
| err = address; |
| pr_info("Found %s chip at %#x, revision %d\n", |
| f71882fg_names[sio_data->type], (unsigned int)address, |
| (int)superio_inb(sioaddr, SIO_REG_DEVREV)); |
| exit: |
| superio_exit(sioaddr); |
| return err; |
| } |
| |
| static int __init f71882fg_device_add(int address, |
| const struct f71882fg_sio_data *sio_data) |
| { |
| struct resource res = { |
| .start = address, |
| .end = address + REGION_LENGTH - 1, |
| .flags = IORESOURCE_IO, |
| }; |
| int err; |
| |
| f71882fg_pdev = platform_device_alloc(DRVNAME, address); |
| if (!f71882fg_pdev) |
| return -ENOMEM; |
| |
| res.name = f71882fg_pdev->name; |
| err = acpi_check_resource_conflict(&res); |
| if (err) |
| goto exit_device_put; |
| |
| err = platform_device_add_resources(f71882fg_pdev, &res, 1); |
| if (err) { |
| pr_err("Device resource addition failed\n"); |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add_data(f71882fg_pdev, sio_data, |
| sizeof(struct f71882fg_sio_data)); |
| if (err) { |
| pr_err("Platform data allocation failed\n"); |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add(f71882fg_pdev); |
| if (err) { |
| pr_err("Device addition failed\n"); |
| goto exit_device_put; |
| } |
| |
| return 0; |
| |
| exit_device_put: |
| platform_device_put(f71882fg_pdev); |
| |
| return err; |
| } |
| |
| static struct platform_driver f71882fg_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = f71882fg_probe, |
| .remove = f71882fg_remove, |
| }; |
| |
| static int __init f71882fg_init(void) |
| { |
| int err; |
| int address; |
| struct f71882fg_sio_data sio_data; |
| |
| memset(&sio_data, 0, sizeof(sio_data)); |
| |
| address = f71882fg_find(0x2e, &sio_data); |
| if (address < 0) |
| address = f71882fg_find(0x4e, &sio_data); |
| if (address < 0) |
| return address; |
| |
| err = platform_driver_register(&f71882fg_driver); |
| if (err) |
| return err; |
| |
| err = f71882fg_device_add(address, &sio_data); |
| if (err) |
| goto exit_driver; |
| |
| return 0; |
| |
| exit_driver: |
| platform_driver_unregister(&f71882fg_driver); |
| return err; |
| } |
| |
| static void __exit f71882fg_exit(void) |
| { |
| platform_device_unregister(f71882fg_pdev); |
| platform_driver_unregister(&f71882fg_driver); |
| } |
| |
| MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); |
| MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(f71882fg_init); |
| module_exit(f71882fg_exit); |