| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Texas Instruments TMP103 SMBus temperature sensor driver |
| * Copyright (C) 2014 Heiko Schocher <hs@denx.de> |
| * |
| * Based on: |
| * Texas Instruments TMP102 SMBus temperature sensor driver |
| * |
| * Copyright (C) 2010 Steven King <sfking@fdwdc.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <linux/jiffies.h> |
| #include <linux/regmap.h> |
| |
| #define TMP103_TEMP_REG 0x00 |
| #define TMP103_CONF_REG 0x01 |
| #define TMP103_TLOW_REG 0x02 |
| #define TMP103_THIGH_REG 0x03 |
| |
| #define TMP103_CONF_M0 0x01 |
| #define TMP103_CONF_M1 0x02 |
| #define TMP103_CONF_LC 0x04 |
| #define TMP103_CONF_FL 0x08 |
| #define TMP103_CONF_FH 0x10 |
| #define TMP103_CONF_CR0 0x20 |
| #define TMP103_CONF_CR1 0x40 |
| #define TMP103_CONF_ID 0x80 |
| #define TMP103_CONF_SD (TMP103_CONF_M1) |
| #define TMP103_CONF_SD_MASK (TMP103_CONF_M0 | TMP103_CONF_M1) |
| |
| #define TMP103_CONFIG (TMP103_CONF_CR1 | TMP103_CONF_M1) |
| #define TMP103_CONFIG_MASK (TMP103_CONF_CR0 | TMP103_CONF_CR1 | \ |
| TMP103_CONF_M0 | TMP103_CONF_M1) |
| |
| static inline int tmp103_reg_to_mc(s8 val) |
| { |
| return val * 1000; |
| } |
| |
| static inline u8 tmp103_mc_to_reg(int val) |
| { |
| return DIV_ROUND_CLOSEST(val, 1000); |
| } |
| |
| static int tmp103_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *temp) |
| { |
| struct regmap *regmap = dev_get_drvdata(dev); |
| unsigned int regval; |
| int err, reg; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| reg = TMP103_TEMP_REG; |
| break; |
| case hwmon_temp_min: |
| reg = TMP103_TLOW_REG; |
| break; |
| case hwmon_temp_max: |
| reg = TMP103_THIGH_REG; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| err = regmap_read(regmap, reg, ®val); |
| if (err < 0) |
| return err; |
| |
| *temp = tmp103_reg_to_mc(regval); |
| |
| return 0; |
| } |
| |
| static int tmp103_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long temp) |
| { |
| struct regmap *regmap = dev_get_drvdata(dev); |
| int reg; |
| |
| switch (attr) { |
| case hwmon_temp_min: |
| reg = TMP103_TLOW_REG; |
| break; |
| case hwmon_temp_max: |
| reg = TMP103_THIGH_REG; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| temp = clamp_val(temp, -55000, 127000); |
| return regmap_write(regmap, reg, tmp103_mc_to_reg(temp)); |
| } |
| |
| static umode_t tmp103_is_visible(const void *data, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| if (type != hwmon_temp) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| return 0444; |
| case hwmon_temp_min: |
| case hwmon_temp_max: |
| return 0644; |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct hwmon_channel_info * const tmp103_info[] = { |
| HWMON_CHANNEL_INFO(chip, |
| HWMON_C_REGISTER_TZ), |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN), |
| NULL |
| }; |
| |
| static const struct hwmon_ops tmp103_hwmon_ops = { |
| .is_visible = tmp103_is_visible, |
| .read = tmp103_read, |
| .write = tmp103_write, |
| }; |
| |
| static const struct hwmon_chip_info tmp103_chip_info = { |
| .ops = &tmp103_hwmon_ops, |
| .info = tmp103_info, |
| }; |
| |
| static bool tmp103_regmap_is_volatile(struct device *dev, unsigned int reg) |
| { |
| return reg == TMP103_TEMP_REG; |
| } |
| |
| static const struct regmap_config tmp103_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = TMP103_THIGH_REG, |
| .volatile_reg = tmp103_regmap_is_volatile, |
| }; |
| |
| static int tmp103_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct device *hwmon_dev; |
| struct regmap *regmap; |
| int ret; |
| |
| regmap = devm_regmap_init_i2c(client, &tmp103_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "failed to allocate register map\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| ret = regmap_update_bits(regmap, TMP103_CONF_REG, TMP103_CONFIG_MASK, |
| TMP103_CONFIG); |
| if (ret < 0) { |
| dev_err(&client->dev, "error writing config register\n"); |
| return ret; |
| } |
| |
| i2c_set_clientdata(client, regmap); |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, |
| regmap, |
| &tmp103_chip_info, |
| NULL); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static int tmp103_suspend(struct device *dev) |
| { |
| struct regmap *regmap = dev_get_drvdata(dev); |
| |
| return regmap_update_bits(regmap, TMP103_CONF_REG, |
| TMP103_CONF_SD_MASK, 0); |
| } |
| |
| static int tmp103_resume(struct device *dev) |
| { |
| struct regmap *regmap = dev_get_drvdata(dev); |
| |
| return regmap_update_bits(regmap, TMP103_CONF_REG, |
| TMP103_CONF_SD_MASK, TMP103_CONF_SD); |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(tmp103_dev_pm_ops, tmp103_suspend, tmp103_resume); |
| |
| static const struct i2c_device_id tmp103_id[] = { |
| { "tmp103", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tmp103_id); |
| |
| static const struct of_device_id __maybe_unused tmp103_of_match[] = { |
| { .compatible = "ti,tmp103" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tmp103_of_match); |
| |
| static struct i2c_driver tmp103_driver = { |
| .driver = { |
| .name = "tmp103", |
| .of_match_table = of_match_ptr(tmp103_of_match), |
| .pm = pm_sleep_ptr(&tmp103_dev_pm_ops), |
| }, |
| .probe_new = tmp103_probe, |
| .id_table = tmp103_id, |
| }; |
| |
| module_i2c_driver(tmp103_driver); |
| |
| MODULE_AUTHOR("Heiko Schocher <hs@denx.de>"); |
| MODULE_DESCRIPTION("Texas Instruments TMP103 temperature sensor driver"); |
| MODULE_LICENSE("GPL"); |