| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // MFD core driver for the Maxim MAX77843 |
| // |
| // Copyright (C) 2015 Samsung Electronics |
| // Author: Jaewon Kim <jaewon02.kim@samsung.com> |
| // Author: Beomho Seo <beomho.seo@samsung.com> |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/max77693-common.h> |
| #include <linux/mfd/max77843-private.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| |
| static const struct mfd_cell max77843_devs[] = { |
| { |
| .name = "max77843-muic", |
| .of_compatible = "maxim,max77843-muic", |
| }, { |
| .name = "max77843-regulator", |
| .of_compatible = "maxim,max77843-regulator", |
| }, { |
| .name = "max77843-charger", |
| .of_compatible = "maxim,max77843-charger" |
| }, { |
| .name = "max77843-fuelgauge", |
| .of_compatible = "maxim,max77843-fuelgauge", |
| }, { |
| .name = "max77843-haptic", |
| .of_compatible = "maxim,max77843-haptic", |
| }, |
| }; |
| |
| static const struct regmap_config max77843_charger_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX77843_CHG_REG_END, |
| }; |
| |
| static const struct regmap_config max77843_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX77843_SYS_REG_END, |
| }; |
| |
| static const struct regmap_irq max77843_irqs[] = { |
| /* TOPSYS interrupts */ |
| { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, }, |
| { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, }, |
| { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, }, |
| { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, }, |
| }; |
| |
| static const struct regmap_irq_chip max77843_irq_chip = { |
| .name = "max77843", |
| .status_base = MAX77843_SYS_REG_SYSINTSRC, |
| .mask_base = MAX77843_SYS_REG_SYSINTMASK, |
| .num_regs = 1, |
| .irqs = max77843_irqs, |
| .num_irqs = ARRAY_SIZE(max77843_irqs), |
| }; |
| |
| /* Charger and Charger regulator use same regmap. */ |
| static int max77843_chg_init(struct max77693_dev *max77843) |
| { |
| int ret; |
| |
| max77843->i2c_chg = i2c_new_dummy_device(max77843->i2c->adapter, I2C_ADDR_CHG); |
| if (IS_ERR(max77843->i2c_chg)) { |
| dev_err(&max77843->i2c->dev, |
| "Cannot allocate I2C device for Charger\n"); |
| return PTR_ERR(max77843->i2c_chg); |
| } |
| i2c_set_clientdata(max77843->i2c_chg, max77843); |
| |
| max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg, |
| &max77843_charger_regmap_config); |
| if (IS_ERR(max77843->regmap_chg)) { |
| ret = PTR_ERR(max77843->regmap_chg); |
| goto err_chg_i2c; |
| } |
| |
| return 0; |
| |
| err_chg_i2c: |
| i2c_unregister_device(max77843->i2c_chg); |
| |
| return ret; |
| } |
| |
| static int max77843_probe(struct i2c_client *i2c) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(i2c); |
| struct max77693_dev *max77843; |
| unsigned int reg_data; |
| int ret; |
| |
| max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL); |
| if (!max77843) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, max77843); |
| max77843->dev = &i2c->dev; |
| max77843->i2c = i2c; |
| max77843->irq = i2c->irq; |
| max77843->type = id->driver_data; |
| |
| max77843->regmap = devm_regmap_init_i2c(i2c, |
| &max77843_regmap_config); |
| if (IS_ERR(max77843->regmap)) { |
| dev_err(&i2c->dev, "Failed to allocate topsys register map\n"); |
| return PTR_ERR(max77843->regmap); |
| } |
| |
| ret = regmap_add_irq_chip(max77843->regmap, max77843->irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, |
| 0, &max77843_irq_chip, &max77843->irq_data_topsys); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n"); |
| return ret; |
| } |
| |
| ret = regmap_read(max77843->regmap, |
| MAX77843_SYS_REG_PMICID, ®_data); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to read PMIC ID\n"); |
| goto err_pmic_id; |
| } |
| dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data); |
| |
| ret = max77843_chg_init(max77843); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to init Charger\n"); |
| goto err_pmic_id; |
| } |
| |
| ret = regmap_update_bits(max77843->regmap, |
| MAX77843_SYS_REG_INTSRCMASK, |
| MAX77843_INTSRC_MASK_MASK, |
| (unsigned int)~MAX77843_INTSRC_MASK_MASK); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to unmask interrupt source\n"); |
| goto err_pmic_id; |
| } |
| |
| ret = mfd_add_devices(max77843->dev, -1, max77843_devs, |
| ARRAY_SIZE(max77843_devs), NULL, 0, NULL); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to add mfd device\n"); |
| goto err_pmic_id; |
| } |
| |
| device_init_wakeup(max77843->dev, true); |
| |
| return 0; |
| |
| err_pmic_id: |
| regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id max77843_dt_match[] = { |
| { .compatible = "maxim,max77843", }, |
| { }, |
| }; |
| |
| static const struct i2c_device_id max77843_id[] = { |
| { "max77843", TYPE_MAX77843, }, |
| { }, |
| }; |
| |
| static int __maybe_unused max77843_suspend(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| struct max77693_dev *max77843 = i2c_get_clientdata(i2c); |
| |
| disable_irq(max77843->irq); |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(max77843->irq); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused max77843_resume(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| struct max77693_dev *max77843 = i2c_get_clientdata(i2c); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(max77843->irq); |
| enable_irq(max77843->irq); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume); |
| |
| static struct i2c_driver max77843_i2c_driver = { |
| .driver = { |
| .name = "max77843", |
| .pm = &max77843_pm, |
| .of_match_table = max77843_dt_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe_new = max77843_probe, |
| .id_table = max77843_id, |
| }; |
| |
| static int __init max77843_i2c_init(void) |
| { |
| return i2c_add_driver(&max77843_i2c_driver); |
| } |
| subsys_initcall(max77843_i2c_init); |