| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_iommu.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/dma-direct.h> /* for bus_dma_region */ |
| #include <linux/dma-map-ops.h> |
| #include <linux/init.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/errno.h> |
| #include "of_private.h" |
| |
| /** |
| * of_match_device - Tell if a struct device matches an of_device_id list |
| * @matches: array of of device match structures to search in |
| * @dev: the of device structure to match against |
| * |
| * Used by a driver to check whether an platform_device present in the |
| * system is in its list of supported devices. |
| */ |
| const struct of_device_id *of_match_device(const struct of_device_id *matches, |
| const struct device *dev) |
| { |
| if (!matches || !dev->of_node || dev->of_node_reused) |
| return NULL; |
| return of_match_node(matches, dev->of_node); |
| } |
| EXPORT_SYMBOL(of_match_device); |
| |
| int of_device_add(struct platform_device *ofdev) |
| { |
| BUG_ON(ofdev->dev.of_node == NULL); |
| |
| /* name and id have to be set so that the platform bus doesn't get |
| * confused on matching */ |
| ofdev->name = dev_name(&ofdev->dev); |
| ofdev->id = PLATFORM_DEVID_NONE; |
| |
| /* |
| * If this device has not binding numa node in devicetree, that is |
| * of_node_to_nid returns NUMA_NO_NODE. device_add will assume that this |
| * device is on the same node as the parent. |
| */ |
| set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->dev.of_node)); |
| |
| return device_add(&ofdev->dev); |
| } |
| |
| static void |
| of_dma_set_restricted_buffer(struct device *dev, struct device_node *np) |
| { |
| struct device_node *node, *of_node = dev->of_node; |
| int count, i; |
| |
| if (!IS_ENABLED(CONFIG_DMA_RESTRICTED_POOL)) |
| return; |
| |
| count = of_property_count_elems_of_size(of_node, "memory-region", |
| sizeof(u32)); |
| /* |
| * If dev->of_node doesn't exist or doesn't contain memory-region, try |
| * the OF node having DMA configuration. |
| */ |
| if (count <= 0) { |
| of_node = np; |
| count = of_property_count_elems_of_size( |
| of_node, "memory-region", sizeof(u32)); |
| } |
| |
| for (i = 0; i < count; i++) { |
| node = of_parse_phandle(of_node, "memory-region", i); |
| /* |
| * There might be multiple memory regions, but only one |
| * restricted-dma-pool region is allowed. |
| */ |
| if (of_device_is_compatible(node, "restricted-dma-pool") && |
| of_device_is_available(node)) { |
| of_node_put(node); |
| break; |
| } |
| of_node_put(node); |
| } |
| |
| /* |
| * Attempt to initialize a restricted-dma-pool region if one was found. |
| * Note that count can hold a negative error code. |
| */ |
| if (i < count && of_reserved_mem_device_init_by_idx(dev, of_node, i)) |
| dev_warn(dev, "failed to initialise \"restricted-dma-pool\" memory node\n"); |
| } |
| |
| /** |
| * of_dma_configure_id - Setup DMA configuration |
| * @dev: Device to apply DMA configuration |
| * @np: Pointer to OF node having DMA configuration |
| * @force_dma: Whether device is to be set up by of_dma_configure() even if |
| * DMA capability is not explicitly described by firmware. |
| * @id: Optional const pointer value input id |
| * |
| * Try to get devices's DMA configuration from DT and update it |
| * accordingly. |
| * |
| * If platform code needs to use its own special DMA configuration, it |
| * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events |
| * to fix up DMA configuration. |
| */ |
| int of_dma_configure_id(struct device *dev, struct device_node *np, |
| bool force_dma, const u32 *id) |
| { |
| const struct iommu_ops *iommu; |
| const struct bus_dma_region *map = NULL; |
| struct device_node *bus_np; |
| u64 dma_start = 0; |
| u64 mask, end, size = 0; |
| bool coherent; |
| int ret; |
| |
| if (np == dev->of_node) |
| bus_np = __of_get_dma_parent(np); |
| else |
| bus_np = of_node_get(np); |
| |
| ret = of_dma_get_range(bus_np, &map); |
| of_node_put(bus_np); |
| if (ret < 0) { |
| /* |
| * For legacy reasons, we have to assume some devices need |
| * DMA configuration regardless of whether "dma-ranges" is |
| * correctly specified or not. |
| */ |
| if (!force_dma) |
| return ret == -ENODEV ? 0 : ret; |
| } else { |
| const struct bus_dma_region *r = map; |
| u64 dma_end = 0; |
| |
| /* Determine the overall bounds of all DMA regions */ |
| for (dma_start = ~0; r->size; r++) { |
| /* Take lower and upper limits */ |
| if (r->dma_start < dma_start) |
| dma_start = r->dma_start; |
| if (r->dma_start + r->size > dma_end) |
| dma_end = r->dma_start + r->size; |
| } |
| size = dma_end - dma_start; |
| |
| /* |
| * Add a work around to treat the size as mask + 1 in case |
| * it is defined in DT as a mask. |
| */ |
| if (size & 1) { |
| dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n", |
| size); |
| size = size + 1; |
| } |
| |
| if (!size) { |
| dev_err(dev, "Adjusted size 0x%llx invalid\n", size); |
| kfree(map); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * If @dev is expected to be DMA-capable then the bus code that created |
| * it should have initialised its dma_mask pointer by this point. For |
| * now, we'll continue the legacy behaviour of coercing it to the |
| * coherent mask if not, but we'll no longer do so quietly. |
| */ |
| if (!dev->dma_mask) { |
| dev_warn(dev, "DMA mask not set\n"); |
| dev->dma_mask = &dev->coherent_dma_mask; |
| } |
| |
| if (!size && dev->coherent_dma_mask) |
| size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); |
| else if (!size) |
| size = 1ULL << 32; |
| |
| /* |
| * Limit coherent and dma mask based on size and default mask |
| * set by the driver. |
| */ |
| end = dma_start + size - 1; |
| mask = DMA_BIT_MASK(ilog2(end) + 1); |
| dev->coherent_dma_mask &= mask; |
| *dev->dma_mask &= mask; |
| /* ...but only set bus limit and range map if we found valid dma-ranges earlier */ |
| if (!ret) { |
| dev->bus_dma_limit = end; |
| dev->dma_range_map = map; |
| } |
| |
| coherent = of_dma_is_coherent(np); |
| dev_dbg(dev, "device is%sdma coherent\n", |
| coherent ? " " : " not "); |
| |
| iommu = of_iommu_configure(dev, np, id); |
| if (PTR_ERR(iommu) == -EPROBE_DEFER) { |
| /* Don't touch range map if it wasn't set from a valid dma-ranges */ |
| if (!ret) |
| dev->dma_range_map = NULL; |
| kfree(map); |
| return -EPROBE_DEFER; |
| } |
| |
| dev_dbg(dev, "device is%sbehind an iommu\n", |
| iommu ? " " : " not "); |
| |
| arch_setup_dma_ops(dev, dma_start, size, iommu, coherent); |
| |
| if (!iommu) |
| of_dma_set_restricted_buffer(dev, np); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(of_dma_configure_id); |
| |
| int of_device_register(struct platform_device *pdev) |
| { |
| device_initialize(&pdev->dev); |
| return of_device_add(pdev); |
| } |
| EXPORT_SYMBOL(of_device_register); |
| |
| void of_device_unregister(struct platform_device *ofdev) |
| { |
| device_unregister(&ofdev->dev); |
| } |
| EXPORT_SYMBOL(of_device_unregister); |
| |
| const void *of_device_get_match_data(const struct device *dev) |
| { |
| const struct of_device_id *match; |
| |
| match = of_match_device(dev->driver->of_match_table, dev); |
| if (!match) |
| return NULL; |
| |
| return match->data; |
| } |
| EXPORT_SYMBOL(of_device_get_match_data); |
| |
| /** |
| * of_device_modalias - Fill buffer with newline terminated modalias string |
| * @dev: Calling device |
| * @str: Modalias string |
| * @len: Size of @str |
| */ |
| ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len) |
| { |
| ssize_t sl; |
| |
| if (!dev || !dev->of_node || dev->of_node_reused) |
| return -ENODEV; |
| |
| sl = of_modalias(dev->of_node, str, len - 2); |
| if (sl < 0) |
| return sl; |
| if (sl > len - 2) |
| return -ENOMEM; |
| |
| str[sl++] = '\n'; |
| str[sl] = 0; |
| return sl; |
| } |
| EXPORT_SYMBOL_GPL(of_device_modalias); |
| |
| /** |
| * of_device_uevent - Display OF related uevent information |
| * @dev: Device to display the uevent information for |
| * @env: Kernel object's userspace event reference to fill up |
| */ |
| void of_device_uevent(const struct device *dev, struct kobj_uevent_env *env) |
| { |
| const char *compat, *type; |
| struct alias_prop *app; |
| struct property *p; |
| int seen = 0; |
| |
| if ((!dev) || (!dev->of_node)) |
| return; |
| |
| add_uevent_var(env, "OF_NAME=%pOFn", dev->of_node); |
| add_uevent_var(env, "OF_FULLNAME=%pOF", dev->of_node); |
| type = of_node_get_device_type(dev->of_node); |
| if (type) |
| add_uevent_var(env, "OF_TYPE=%s", type); |
| |
| /* Since the compatible field can contain pretty much anything |
| * it's not really legal to split it out with commas. We split it |
| * up using a number of environment variables instead. */ |
| of_property_for_each_string(dev->of_node, "compatible", p, compat) { |
| add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat); |
| seen++; |
| } |
| add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen); |
| |
| seen = 0; |
| mutex_lock(&of_mutex); |
| list_for_each_entry(app, &aliases_lookup, link) { |
| if (dev->of_node == app->np) { |
| add_uevent_var(env, "OF_ALIAS_%d=%s", seen, |
| app->alias); |
| seen++; |
| } |
| } |
| mutex_unlock(&of_mutex); |
| } |
| |
| int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *env) |
| { |
| int sl; |
| |
| if ((!dev) || (!dev->of_node) || dev->of_node_reused) |
| return -ENODEV; |
| |
| /* Devicetree modalias is tricky, we add it in 2 steps */ |
| if (add_uevent_var(env, "MODALIAS=")) |
| return -ENOMEM; |
| |
| sl = of_modalias(dev->of_node, &env->buf[env->buflen-1], |
| sizeof(env->buf) - env->buflen); |
| if (sl < 0) |
| return sl; |
| if (sl >= (sizeof(env->buf) - env->buflen)) |
| return -ENOMEM; |
| env->buflen += sl; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(of_device_uevent_modalias); |