| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include "misc.h" |
| #include "ctree.h" |
| #include "space-info.h" |
| #include "sysfs.h" |
| #include "volumes.h" |
| #include "free-space-cache.h" |
| #include "ordered-data.h" |
| #include "transaction.h" |
| #include "block-group.h" |
| #include "zoned.h" |
| #include "fs.h" |
| #include "accessors.h" |
| #include "extent-tree.h" |
| |
| /* |
| * HOW DOES SPACE RESERVATION WORK |
| * |
| * If you want to know about delalloc specifically, there is a separate comment |
| * for that with the delalloc code. This comment is about how the whole system |
| * works generally. |
| * |
| * BASIC CONCEPTS |
| * |
| * 1) space_info. This is the ultimate arbiter of how much space we can use. |
| * There's a description of the bytes_ fields with the struct declaration, |
| * refer to that for specifics on each field. Suffice it to say that for |
| * reservations we care about total_bytes - SUM(space_info->bytes_) when |
| * determining if there is space to make an allocation. There is a space_info |
| * for METADATA, SYSTEM, and DATA areas. |
| * |
| * 2) block_rsv's. These are basically buckets for every different type of |
| * metadata reservation we have. You can see the comment in the block_rsv |
| * code on the rules for each type, but generally block_rsv->reserved is how |
| * much space is accounted for in space_info->bytes_may_use. |
| * |
| * 3) btrfs_calc*_size. These are the worst case calculations we used based |
| * on the number of items we will want to modify. We have one for changing |
| * items, and one for inserting new items. Generally we use these helpers to |
| * determine the size of the block reserves, and then use the actual bytes |
| * values to adjust the space_info counters. |
| * |
| * MAKING RESERVATIONS, THE NORMAL CASE |
| * |
| * We call into either btrfs_reserve_data_bytes() or |
| * btrfs_reserve_metadata_bytes(), depending on which we're looking for, with |
| * num_bytes we want to reserve. |
| * |
| * ->reserve |
| * space_info->bytes_may_reserve += num_bytes |
| * |
| * ->extent allocation |
| * Call btrfs_add_reserved_bytes() which does |
| * space_info->bytes_may_reserve -= num_bytes |
| * space_info->bytes_reserved += extent_bytes |
| * |
| * ->insert reference |
| * Call btrfs_update_block_group() which does |
| * space_info->bytes_reserved -= extent_bytes |
| * space_info->bytes_used += extent_bytes |
| * |
| * MAKING RESERVATIONS, FLUSHING NORMALLY (non-priority) |
| * |
| * Assume we are unable to simply make the reservation because we do not have |
| * enough space |
| * |
| * -> __reserve_bytes |
| * create a reserve_ticket with ->bytes set to our reservation, add it to |
| * the tail of space_info->tickets, kick async flush thread |
| * |
| * ->handle_reserve_ticket |
| * wait on ticket->wait for ->bytes to be reduced to 0, or ->error to be set |
| * on the ticket. |
| * |
| * -> btrfs_async_reclaim_metadata_space/btrfs_async_reclaim_data_space |
| * Flushes various things attempting to free up space. |
| * |
| * -> btrfs_try_granting_tickets() |
| * This is called by anything that either subtracts space from |
| * space_info->bytes_may_use, ->bytes_pinned, etc, or adds to the |
| * space_info->total_bytes. This loops through the ->priority_tickets and |
| * then the ->tickets list checking to see if the reservation can be |
| * completed. If it can the space is added to space_info->bytes_may_use and |
| * the ticket is woken up. |
| * |
| * -> ticket wakeup |
| * Check if ->bytes == 0, if it does we got our reservation and we can carry |
| * on, if not return the appropriate error (ENOSPC, but can be EINTR if we |
| * were interrupted.) |
| * |
| * MAKING RESERVATIONS, FLUSHING HIGH PRIORITY |
| * |
| * Same as the above, except we add ourselves to the |
| * space_info->priority_tickets, and we do not use ticket->wait, we simply |
| * call flush_space() ourselves for the states that are safe for us to call |
| * without deadlocking and hope for the best. |
| * |
| * THE FLUSHING STATES |
| * |
| * Generally speaking we will have two cases for each state, a "nice" state |
| * and a "ALL THE THINGS" state. In btrfs we delay a lot of work in order to |
| * reduce the locking over head on the various trees, and even to keep from |
| * doing any work at all in the case of delayed refs. Each of these delayed |
| * things however hold reservations, and so letting them run allows us to |
| * reclaim space so we can make new reservations. |
| * |
| * FLUSH_DELAYED_ITEMS |
| * Every inode has a delayed item to update the inode. Take a simple write |
| * for example, we would update the inode item at write time to update the |
| * mtime, and then again at finish_ordered_io() time in order to update the |
| * isize or bytes. We keep these delayed items to coalesce these operations |
| * into a single operation done on demand. These are an easy way to reclaim |
| * metadata space. |
| * |
| * FLUSH_DELALLOC |
| * Look at the delalloc comment to get an idea of how much space is reserved |
| * for delayed allocation. We can reclaim some of this space simply by |
| * running delalloc, but usually we need to wait for ordered extents to |
| * reclaim the bulk of this space. |
| * |
| * FLUSH_DELAYED_REFS |
| * We have a block reserve for the outstanding delayed refs space, and every |
| * delayed ref operation holds a reservation. Running these is a quick way |
| * to reclaim space, but we want to hold this until the end because COW can |
| * churn a lot and we can avoid making some extent tree modifications if we |
| * are able to delay for as long as possible. |
| * |
| * ALLOC_CHUNK |
| * We will skip this the first time through space reservation, because of |
| * overcommit and we don't want to have a lot of useless metadata space when |
| * our worst case reservations will likely never come true. |
| * |
| * RUN_DELAYED_IPUTS |
| * If we're freeing inodes we're likely freeing checksums, file extent |
| * items, and extent tree items. Loads of space could be freed up by these |
| * operations, however they won't be usable until the transaction commits. |
| * |
| * COMMIT_TRANS |
| * This will commit the transaction. Historically we had a lot of logic |
| * surrounding whether or not we'd commit the transaction, but this waits born |
| * out of a pre-tickets era where we could end up committing the transaction |
| * thousands of times in a row without making progress. Now thanks to our |
| * ticketing system we know if we're not making progress and can error |
| * everybody out after a few commits rather than burning the disk hoping for |
| * a different answer. |
| * |
| * OVERCOMMIT |
| * |
| * Because we hold so many reservations for metadata we will allow you to |
| * reserve more space than is currently free in the currently allocate |
| * metadata space. This only happens with metadata, data does not allow |
| * overcommitting. |
| * |
| * You can see the current logic for when we allow overcommit in |
| * btrfs_can_overcommit(), but it only applies to unallocated space. If there |
| * is no unallocated space to be had, all reservations are kept within the |
| * free space in the allocated metadata chunks. |
| * |
| * Because of overcommitting, you generally want to use the |
| * btrfs_can_overcommit() logic for metadata allocations, as it does the right |
| * thing with or without extra unallocated space. |
| */ |
| |
| u64 __pure btrfs_space_info_used(struct btrfs_space_info *s_info, |
| bool may_use_included) |
| { |
| ASSERT(s_info); |
| return s_info->bytes_used + s_info->bytes_reserved + |
| s_info->bytes_pinned + s_info->bytes_readonly + |
| s_info->bytes_zone_unusable + |
| (may_use_included ? s_info->bytes_may_use : 0); |
| } |
| |
| /* |
| * after adding space to the filesystem, we need to clear the full flags |
| * on all the space infos. |
| */ |
| void btrfs_clear_space_info_full(struct btrfs_fs_info *info) |
| { |
| struct list_head *head = &info->space_info; |
| struct btrfs_space_info *found; |
| |
| list_for_each_entry(found, head, list) |
| found->full = 0; |
| } |
| |
| /* |
| * Block groups with more than this value (percents) of unusable space will be |
| * scheduled for background reclaim. |
| */ |
| #define BTRFS_DEFAULT_ZONED_RECLAIM_THRESH (75) |
| |
| /* |
| * Calculate chunk size depending on volume type (regular or zoned). |
| */ |
| static u64 calc_chunk_size(const struct btrfs_fs_info *fs_info, u64 flags) |
| { |
| if (btrfs_is_zoned(fs_info)) |
| return fs_info->zone_size; |
| |
| ASSERT(flags & BTRFS_BLOCK_GROUP_TYPE_MASK); |
| |
| if (flags & BTRFS_BLOCK_GROUP_DATA) |
| return BTRFS_MAX_DATA_CHUNK_SIZE; |
| else if (flags & BTRFS_BLOCK_GROUP_SYSTEM) |
| return SZ_32M; |
| |
| /* Handle BTRFS_BLOCK_GROUP_METADATA */ |
| if (fs_info->fs_devices->total_rw_bytes > 50ULL * SZ_1G) |
| return SZ_1G; |
| |
| return SZ_256M; |
| } |
| |
| /* |
| * Update default chunk size. |
| */ |
| void btrfs_update_space_info_chunk_size(struct btrfs_space_info *space_info, |
| u64 chunk_size) |
| { |
| WRITE_ONCE(space_info->chunk_size, chunk_size); |
| } |
| |
| static int create_space_info(struct btrfs_fs_info *info, u64 flags) |
| { |
| |
| struct btrfs_space_info *space_info; |
| int i; |
| int ret; |
| |
| space_info = kzalloc(sizeof(*space_info), GFP_NOFS); |
| if (!space_info) |
| return -ENOMEM; |
| |
| for (i = 0; i < BTRFS_NR_RAID_TYPES; i++) |
| INIT_LIST_HEAD(&space_info->block_groups[i]); |
| init_rwsem(&space_info->groups_sem); |
| spin_lock_init(&space_info->lock); |
| space_info->flags = flags & BTRFS_BLOCK_GROUP_TYPE_MASK; |
| space_info->force_alloc = CHUNK_ALLOC_NO_FORCE; |
| INIT_LIST_HEAD(&space_info->ro_bgs); |
| INIT_LIST_HEAD(&space_info->tickets); |
| INIT_LIST_HEAD(&space_info->priority_tickets); |
| space_info->clamp = 1; |
| btrfs_update_space_info_chunk_size(space_info, calc_chunk_size(info, flags)); |
| |
| if (btrfs_is_zoned(info)) |
| space_info->bg_reclaim_threshold = BTRFS_DEFAULT_ZONED_RECLAIM_THRESH; |
| |
| ret = btrfs_sysfs_add_space_info_type(info, space_info); |
| if (ret) |
| return ret; |
| |
| list_add(&space_info->list, &info->space_info); |
| if (flags & BTRFS_BLOCK_GROUP_DATA) |
| info->data_sinfo = space_info; |
| |
| return ret; |
| } |
| |
| int btrfs_init_space_info(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_super_block *disk_super; |
| u64 features; |
| u64 flags; |
| int mixed = 0; |
| int ret; |
| |
| disk_super = fs_info->super_copy; |
| if (!btrfs_super_root(disk_super)) |
| return -EINVAL; |
| |
| features = btrfs_super_incompat_flags(disk_super); |
| if (features & BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS) |
| mixed = 1; |
| |
| flags = BTRFS_BLOCK_GROUP_SYSTEM; |
| ret = create_space_info(fs_info, flags); |
| if (ret) |
| goto out; |
| |
| if (mixed) { |
| flags = BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA; |
| ret = create_space_info(fs_info, flags); |
| } else { |
| flags = BTRFS_BLOCK_GROUP_METADATA; |
| ret = create_space_info(fs_info, flags); |
| if (ret) |
| goto out; |
| |
| flags = BTRFS_BLOCK_GROUP_DATA; |
| ret = create_space_info(fs_info, flags); |
| } |
| out: |
| return ret; |
| } |
| |
| void btrfs_add_bg_to_space_info(struct btrfs_fs_info *info, |
| struct btrfs_block_group *block_group) |
| { |
| struct btrfs_space_info *found; |
| int factor, index; |
| |
| factor = btrfs_bg_type_to_factor(block_group->flags); |
| |
| found = btrfs_find_space_info(info, block_group->flags); |
| ASSERT(found); |
| spin_lock(&found->lock); |
| found->total_bytes += block_group->length; |
| found->disk_total += block_group->length * factor; |
| found->bytes_used += block_group->used; |
| found->disk_used += block_group->used * factor; |
| found->bytes_readonly += block_group->bytes_super; |
| found->bytes_zone_unusable += block_group->zone_unusable; |
| if (block_group->length > 0) |
| found->full = 0; |
| btrfs_try_granting_tickets(info, found); |
| spin_unlock(&found->lock); |
| |
| block_group->space_info = found; |
| |
| index = btrfs_bg_flags_to_raid_index(block_group->flags); |
| down_write(&found->groups_sem); |
| list_add_tail(&block_group->list, &found->block_groups[index]); |
| up_write(&found->groups_sem); |
| } |
| |
| struct btrfs_space_info *btrfs_find_space_info(struct btrfs_fs_info *info, |
| u64 flags) |
| { |
| struct list_head *head = &info->space_info; |
| struct btrfs_space_info *found; |
| |
| flags &= BTRFS_BLOCK_GROUP_TYPE_MASK; |
| |
| list_for_each_entry(found, head, list) { |
| if (found->flags & flags) |
| return found; |
| } |
| return NULL; |
| } |
| |
| static u64 calc_available_free_space(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| u64 profile; |
| u64 avail; |
| int factor; |
| |
| if (space_info->flags & BTRFS_BLOCK_GROUP_SYSTEM) |
| profile = btrfs_system_alloc_profile(fs_info); |
| else |
| profile = btrfs_metadata_alloc_profile(fs_info); |
| |
| avail = atomic64_read(&fs_info->free_chunk_space); |
| |
| /* |
| * If we have dup, raid1 or raid10 then only half of the free |
| * space is actually usable. For raid56, the space info used |
| * doesn't include the parity drive, so we don't have to |
| * change the math |
| */ |
| factor = btrfs_bg_type_to_factor(profile); |
| avail = div_u64(avail, factor); |
| |
| /* |
| * If we aren't flushing all things, let us overcommit up to |
| * 1/2th of the space. If we can flush, don't let us overcommit |
| * too much, let it overcommit up to 1/8 of the space. |
| */ |
| if (flush == BTRFS_RESERVE_FLUSH_ALL) |
| avail >>= 3; |
| else |
| avail >>= 1; |
| return avail; |
| } |
| |
| int btrfs_can_overcommit(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, u64 bytes, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| u64 avail; |
| u64 used; |
| |
| /* Don't overcommit when in mixed mode */ |
| if (space_info->flags & BTRFS_BLOCK_GROUP_DATA) |
| return 0; |
| |
| used = btrfs_space_info_used(space_info, true); |
| if (test_bit(BTRFS_FS_ACTIVE_ZONE_TRACKING, &fs_info->flags) && |
| (space_info->flags & BTRFS_BLOCK_GROUP_METADATA)) |
| avail = 0; |
| else |
| avail = calc_available_free_space(fs_info, space_info, flush); |
| |
| if (used + bytes < space_info->total_bytes + avail) |
| return 1; |
| return 0; |
| } |
| |
| static void remove_ticket(struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket) |
| { |
| if (!list_empty(&ticket->list)) { |
| list_del_init(&ticket->list); |
| ASSERT(space_info->reclaim_size >= ticket->bytes); |
| space_info->reclaim_size -= ticket->bytes; |
| } |
| } |
| |
| /* |
| * This is for space we already have accounted in space_info->bytes_may_use, so |
| * basically when we're returning space from block_rsv's. |
| */ |
| void btrfs_try_granting_tickets(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info) |
| { |
| struct list_head *head; |
| enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_NO_FLUSH; |
| |
| lockdep_assert_held(&space_info->lock); |
| |
| head = &space_info->priority_tickets; |
| again: |
| while (!list_empty(head)) { |
| struct reserve_ticket *ticket; |
| u64 used = btrfs_space_info_used(space_info, true); |
| |
| ticket = list_first_entry(head, struct reserve_ticket, list); |
| |
| /* Check and see if our ticket can be satisfied now. */ |
| if ((used + ticket->bytes <= space_info->total_bytes) || |
| btrfs_can_overcommit(fs_info, space_info, ticket->bytes, |
| flush)) { |
| btrfs_space_info_update_bytes_may_use(fs_info, |
| space_info, |
| ticket->bytes); |
| remove_ticket(space_info, ticket); |
| ticket->bytes = 0; |
| space_info->tickets_id++; |
| wake_up(&ticket->wait); |
| } else { |
| break; |
| } |
| } |
| |
| if (head == &space_info->priority_tickets) { |
| head = &space_info->tickets; |
| flush = BTRFS_RESERVE_FLUSH_ALL; |
| goto again; |
| } |
| } |
| |
| #define DUMP_BLOCK_RSV(fs_info, rsv_name) \ |
| do { \ |
| struct btrfs_block_rsv *__rsv = &(fs_info)->rsv_name; \ |
| spin_lock(&__rsv->lock); \ |
| btrfs_info(fs_info, #rsv_name ": size %llu reserved %llu", \ |
| __rsv->size, __rsv->reserved); \ |
| spin_unlock(&__rsv->lock); \ |
| } while (0) |
| |
| static const char *space_info_flag_to_str(const struct btrfs_space_info *space_info) |
| { |
| switch (space_info->flags) { |
| case BTRFS_BLOCK_GROUP_SYSTEM: |
| return "SYSTEM"; |
| case BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA: |
| return "DATA+METADATA"; |
| case BTRFS_BLOCK_GROUP_DATA: |
| return "DATA"; |
| case BTRFS_BLOCK_GROUP_METADATA: |
| return "METADATA"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static void dump_global_block_rsv(struct btrfs_fs_info *fs_info) |
| { |
| DUMP_BLOCK_RSV(fs_info, global_block_rsv); |
| DUMP_BLOCK_RSV(fs_info, trans_block_rsv); |
| DUMP_BLOCK_RSV(fs_info, chunk_block_rsv); |
| DUMP_BLOCK_RSV(fs_info, delayed_block_rsv); |
| DUMP_BLOCK_RSV(fs_info, delayed_refs_rsv); |
| } |
| |
| static void __btrfs_dump_space_info(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *info) |
| { |
| const char *flag_str = space_info_flag_to_str(info); |
| lockdep_assert_held(&info->lock); |
| |
| /* The free space could be negative in case of overcommit */ |
| btrfs_info(fs_info, "space_info %s has %lld free, is %sfull", |
| flag_str, |
| (s64)(info->total_bytes - btrfs_space_info_used(info, true)), |
| info->full ? "" : "not "); |
| btrfs_info(fs_info, |
| "space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu zone_unusable=%llu", |
| info->total_bytes, info->bytes_used, info->bytes_pinned, |
| info->bytes_reserved, info->bytes_may_use, |
| info->bytes_readonly, info->bytes_zone_unusable); |
| } |
| |
| void btrfs_dump_space_info(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *info, u64 bytes, |
| int dump_block_groups) |
| { |
| struct btrfs_block_group *cache; |
| int index = 0; |
| |
| spin_lock(&info->lock); |
| __btrfs_dump_space_info(fs_info, info); |
| dump_global_block_rsv(fs_info); |
| spin_unlock(&info->lock); |
| |
| if (!dump_block_groups) |
| return; |
| |
| down_read(&info->groups_sem); |
| again: |
| list_for_each_entry(cache, &info->block_groups[index], list) { |
| spin_lock(&cache->lock); |
| btrfs_info(fs_info, |
| "block group %llu has %llu bytes, %llu used %llu pinned %llu reserved %llu zone_unusable %s", |
| cache->start, cache->length, cache->used, cache->pinned, |
| cache->reserved, cache->zone_unusable, |
| cache->ro ? "[readonly]" : ""); |
| spin_unlock(&cache->lock); |
| btrfs_dump_free_space(cache, bytes); |
| } |
| if (++index < BTRFS_NR_RAID_TYPES) |
| goto again; |
| up_read(&info->groups_sem); |
| } |
| |
| static inline u64 calc_reclaim_items_nr(struct btrfs_fs_info *fs_info, |
| u64 to_reclaim) |
| { |
| u64 bytes; |
| u64 nr; |
| |
| bytes = btrfs_calc_insert_metadata_size(fs_info, 1); |
| nr = div64_u64(to_reclaim, bytes); |
| if (!nr) |
| nr = 1; |
| return nr; |
| } |
| |
| #define EXTENT_SIZE_PER_ITEM SZ_256K |
| |
| /* |
| * shrink metadata reservation for delalloc |
| */ |
| static void shrink_delalloc(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| u64 to_reclaim, bool wait_ordered, |
| bool for_preempt) |
| { |
| struct btrfs_trans_handle *trans; |
| u64 delalloc_bytes; |
| u64 ordered_bytes; |
| u64 items; |
| long time_left; |
| int loops; |
| |
| delalloc_bytes = percpu_counter_sum_positive(&fs_info->delalloc_bytes); |
| ordered_bytes = percpu_counter_sum_positive(&fs_info->ordered_bytes); |
| if (delalloc_bytes == 0 && ordered_bytes == 0) |
| return; |
| |
| /* Calc the number of the pages we need flush for space reservation */ |
| if (to_reclaim == U64_MAX) { |
| items = U64_MAX; |
| } else { |
| /* |
| * to_reclaim is set to however much metadata we need to |
| * reclaim, but reclaiming that much data doesn't really track |
| * exactly. What we really want to do is reclaim full inode's |
| * worth of reservations, however that's not available to us |
| * here. We will take a fraction of the delalloc bytes for our |
| * flushing loops and hope for the best. Delalloc will expand |
| * the amount we write to cover an entire dirty extent, which |
| * will reclaim the metadata reservation for that range. If |
| * it's not enough subsequent flush stages will be more |
| * aggressive. |
| */ |
| to_reclaim = max(to_reclaim, delalloc_bytes >> 3); |
| items = calc_reclaim_items_nr(fs_info, to_reclaim) * 2; |
| } |
| |
| trans = current->journal_info; |
| |
| /* |
| * If we are doing more ordered than delalloc we need to just wait on |
| * ordered extents, otherwise we'll waste time trying to flush delalloc |
| * that likely won't give us the space back we need. |
| */ |
| if (ordered_bytes > delalloc_bytes && !for_preempt) |
| wait_ordered = true; |
| |
| loops = 0; |
| while ((delalloc_bytes || ordered_bytes) && loops < 3) { |
| u64 temp = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT; |
| long nr_pages = min_t(u64, temp, LONG_MAX); |
| int async_pages; |
| |
| btrfs_start_delalloc_roots(fs_info, nr_pages, true); |
| |
| /* |
| * We need to make sure any outstanding async pages are now |
| * processed before we continue. This is because things like |
| * sync_inode() try to be smart and skip writing if the inode is |
| * marked clean. We don't use filemap_fwrite for flushing |
| * because we want to control how many pages we write out at a |
| * time, thus this is the only safe way to make sure we've |
| * waited for outstanding compressed workers to have started |
| * their jobs and thus have ordered extents set up properly. |
| * |
| * This exists because we do not want to wait for each |
| * individual inode to finish its async work, we simply want to |
| * start the IO on everybody, and then come back here and wait |
| * for all of the async work to catch up. Once we're done with |
| * that we know we'll have ordered extents for everything and we |
| * can decide if we wait for that or not. |
| * |
| * If we choose to replace this in the future, make absolutely |
| * sure that the proper waiting is being done in the async case, |
| * as there have been bugs in that area before. |
| */ |
| async_pages = atomic_read(&fs_info->async_delalloc_pages); |
| if (!async_pages) |
| goto skip_async; |
| |
| /* |
| * We don't want to wait forever, if we wrote less pages in this |
| * loop than we have outstanding, only wait for that number of |
| * pages, otherwise we can wait for all async pages to finish |
| * before continuing. |
| */ |
| if (async_pages > nr_pages) |
| async_pages -= nr_pages; |
| else |
| async_pages = 0; |
| wait_event(fs_info->async_submit_wait, |
| atomic_read(&fs_info->async_delalloc_pages) <= |
| async_pages); |
| skip_async: |
| loops++; |
| if (wait_ordered && !trans) { |
| btrfs_wait_ordered_roots(fs_info, items, 0, (u64)-1); |
| } else { |
| time_left = schedule_timeout_killable(1); |
| if (time_left) |
| break; |
| } |
| |
| /* |
| * If we are for preemption we just want a one-shot of delalloc |
| * flushing so we can stop flushing if we decide we don't need |
| * to anymore. |
| */ |
| if (for_preempt) |
| break; |
| |
| spin_lock(&space_info->lock); |
| if (list_empty(&space_info->tickets) && |
| list_empty(&space_info->priority_tickets)) { |
| spin_unlock(&space_info->lock); |
| break; |
| } |
| spin_unlock(&space_info->lock); |
| |
| delalloc_bytes = percpu_counter_sum_positive( |
| &fs_info->delalloc_bytes); |
| ordered_bytes = percpu_counter_sum_positive( |
| &fs_info->ordered_bytes); |
| } |
| } |
| |
| /* |
| * Try to flush some data based on policy set by @state. This is only advisory |
| * and may fail for various reasons. The caller is supposed to examine the |
| * state of @space_info to detect the outcome. |
| */ |
| static void flush_space(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, u64 num_bytes, |
| enum btrfs_flush_state state, bool for_preempt) |
| { |
| struct btrfs_root *root = fs_info->tree_root; |
| struct btrfs_trans_handle *trans; |
| int nr; |
| int ret = 0; |
| |
| switch (state) { |
| case FLUSH_DELAYED_ITEMS_NR: |
| case FLUSH_DELAYED_ITEMS: |
| if (state == FLUSH_DELAYED_ITEMS_NR) |
| nr = calc_reclaim_items_nr(fs_info, num_bytes) * 2; |
| else |
| nr = -1; |
| |
| trans = btrfs_join_transaction(root); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| break; |
| } |
| ret = btrfs_run_delayed_items_nr(trans, nr); |
| btrfs_end_transaction(trans); |
| break; |
| case FLUSH_DELALLOC: |
| case FLUSH_DELALLOC_WAIT: |
| case FLUSH_DELALLOC_FULL: |
| if (state == FLUSH_DELALLOC_FULL) |
| num_bytes = U64_MAX; |
| shrink_delalloc(fs_info, space_info, num_bytes, |
| state != FLUSH_DELALLOC, for_preempt); |
| break; |
| case FLUSH_DELAYED_REFS_NR: |
| case FLUSH_DELAYED_REFS: |
| trans = btrfs_join_transaction(root); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| break; |
| } |
| if (state == FLUSH_DELAYED_REFS_NR) |
| nr = calc_reclaim_items_nr(fs_info, num_bytes); |
| else |
| nr = 0; |
| btrfs_run_delayed_refs(trans, nr); |
| btrfs_end_transaction(trans); |
| break; |
| case ALLOC_CHUNK: |
| case ALLOC_CHUNK_FORCE: |
| /* |
| * For metadata space on zoned filesystem, reaching here means we |
| * don't have enough space left in active_total_bytes. Try to |
| * activate a block group first, because we may have inactive |
| * block group already allocated. |
| */ |
| ret = btrfs_zoned_activate_one_bg(fs_info, space_info, false); |
| if (ret < 0) |
| break; |
| else if (ret == 1) |
| break; |
| |
| trans = btrfs_join_transaction(root); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| break; |
| } |
| ret = btrfs_chunk_alloc(trans, |
| btrfs_get_alloc_profile(fs_info, space_info->flags), |
| (state == ALLOC_CHUNK) ? CHUNK_ALLOC_NO_FORCE : |
| CHUNK_ALLOC_FORCE); |
| btrfs_end_transaction(trans); |
| |
| /* |
| * For metadata space on zoned filesystem, allocating a new chunk |
| * is not enough. We still need to activate the block * group. |
| * Active the newly allocated block group by (maybe) finishing |
| * a block group. |
| */ |
| if (ret == 1) { |
| ret = btrfs_zoned_activate_one_bg(fs_info, space_info, true); |
| /* |
| * Revert to the original ret regardless we could finish |
| * one block group or not. |
| */ |
| if (ret >= 0) |
| ret = 1; |
| } |
| |
| if (ret > 0 || ret == -ENOSPC) |
| ret = 0; |
| break; |
| case RUN_DELAYED_IPUTS: |
| /* |
| * If we have pending delayed iputs then we could free up a |
| * bunch of pinned space, so make sure we run the iputs before |
| * we do our pinned bytes check below. |
| */ |
| btrfs_run_delayed_iputs(fs_info); |
| btrfs_wait_on_delayed_iputs(fs_info); |
| break; |
| case COMMIT_TRANS: |
| ASSERT(current->journal_info == NULL); |
| trans = btrfs_join_transaction(root); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| break; |
| } |
| ret = btrfs_commit_transaction(trans); |
| break; |
| default: |
| ret = -ENOSPC; |
| break; |
| } |
| |
| trace_btrfs_flush_space(fs_info, space_info->flags, num_bytes, state, |
| ret, for_preempt); |
| return; |
| } |
| |
| static inline u64 |
| btrfs_calc_reclaim_metadata_size(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info) |
| { |
| u64 used; |
| u64 avail; |
| u64 to_reclaim = space_info->reclaim_size; |
| |
| lockdep_assert_held(&space_info->lock); |
| |
| avail = calc_available_free_space(fs_info, space_info, |
| BTRFS_RESERVE_FLUSH_ALL); |
| used = btrfs_space_info_used(space_info, true); |
| |
| /* |
| * We may be flushing because suddenly we have less space than we had |
| * before, and now we're well over-committed based on our current free |
| * space. If that's the case add in our overage so we make sure to put |
| * appropriate pressure on the flushing state machine. |
| */ |
| if (space_info->total_bytes + avail < used) |
| to_reclaim += used - (space_info->total_bytes + avail); |
| |
| return to_reclaim; |
| } |
| |
| static bool need_preemptive_reclaim(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info) |
| { |
| u64 global_rsv_size = fs_info->global_block_rsv.reserved; |
| u64 ordered, delalloc; |
| u64 thresh; |
| u64 used; |
| |
| thresh = mult_perc(space_info->total_bytes, 90); |
| |
| lockdep_assert_held(&space_info->lock); |
| |
| /* If we're just plain full then async reclaim just slows us down. */ |
| if ((space_info->bytes_used + space_info->bytes_reserved + |
| global_rsv_size) >= thresh) |
| return false; |
| |
| used = space_info->bytes_may_use + space_info->bytes_pinned; |
| |
| /* The total flushable belongs to the global rsv, don't flush. */ |
| if (global_rsv_size >= used) |
| return false; |
| |
| /* |
| * 128MiB is 1/4 of the maximum global rsv size. If we have less than |
| * that devoted to other reservations then there's no sense in flushing, |
| * we don't have a lot of things that need flushing. |
| */ |
| if (used - global_rsv_size <= SZ_128M) |
| return false; |
| |
| /* |
| * We have tickets queued, bail so we don't compete with the async |
| * flushers. |
| */ |
| if (space_info->reclaim_size) |
| return false; |
| |
| /* |
| * If we have over half of the free space occupied by reservations or |
| * pinned then we want to start flushing. |
| * |
| * We do not do the traditional thing here, which is to say |
| * |
| * if (used >= ((total_bytes + avail) / 2)) |
| * return 1; |
| * |
| * because this doesn't quite work how we want. If we had more than 50% |
| * of the space_info used by bytes_used and we had 0 available we'd just |
| * constantly run the background flusher. Instead we want it to kick in |
| * if our reclaimable space exceeds our clamped free space. |
| * |
| * Our clamping range is 2^1 -> 2^8. Practically speaking that means |
| * the following: |
| * |
| * Amount of RAM Minimum threshold Maximum threshold |
| * |
| * 256GiB 1GiB 128GiB |
| * 128GiB 512MiB 64GiB |
| * 64GiB 256MiB 32GiB |
| * 32GiB 128MiB 16GiB |
| * 16GiB 64MiB 8GiB |
| * |
| * These are the range our thresholds will fall in, corresponding to how |
| * much delalloc we need for the background flusher to kick in. |
| */ |
| |
| thresh = calc_available_free_space(fs_info, space_info, |
| BTRFS_RESERVE_FLUSH_ALL); |
| used = space_info->bytes_used + space_info->bytes_reserved + |
| space_info->bytes_readonly + global_rsv_size; |
| if (used < space_info->total_bytes) |
| thresh += space_info->total_bytes - used; |
| thresh >>= space_info->clamp; |
| |
| used = space_info->bytes_pinned; |
| |
| /* |
| * If we have more ordered bytes than delalloc bytes then we're either |
| * doing a lot of DIO, or we simply don't have a lot of delalloc waiting |
| * around. Preemptive flushing is only useful in that it can free up |
| * space before tickets need to wait for things to finish. In the case |
| * of ordered extents, preemptively waiting on ordered extents gets us |
| * nothing, if our reservations are tied up in ordered extents we'll |
| * simply have to slow down writers by forcing them to wait on ordered |
| * extents. |
| * |
| * In the case that ordered is larger than delalloc, only include the |
| * block reserves that we would actually be able to directly reclaim |
| * from. In this case if we're heavy on metadata operations this will |
| * clearly be heavy enough to warrant preemptive flushing. In the case |
| * of heavy DIO or ordered reservations, preemptive flushing will just |
| * waste time and cause us to slow down. |
| * |
| * We want to make sure we truly are maxed out on ordered however, so |
| * cut ordered in half, and if it's still higher than delalloc then we |
| * can keep flushing. This is to avoid the case where we start |
| * flushing, and now delalloc == ordered and we stop preemptively |
| * flushing when we could still have several gigs of delalloc to flush. |
| */ |
| ordered = percpu_counter_read_positive(&fs_info->ordered_bytes) >> 1; |
| delalloc = percpu_counter_read_positive(&fs_info->delalloc_bytes); |
| if (ordered >= delalloc) |
| used += fs_info->delayed_refs_rsv.reserved + |
| fs_info->delayed_block_rsv.reserved; |
| else |
| used += space_info->bytes_may_use - global_rsv_size; |
| |
| return (used >= thresh && !btrfs_fs_closing(fs_info) && |
| !test_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state)); |
| } |
| |
| static bool steal_from_global_rsv(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket) |
| { |
| struct btrfs_block_rsv *global_rsv = &fs_info->global_block_rsv; |
| u64 min_bytes; |
| |
| if (!ticket->steal) |
| return false; |
| |
| if (global_rsv->space_info != space_info) |
| return false; |
| |
| spin_lock(&global_rsv->lock); |
| min_bytes = mult_perc(global_rsv->size, 10); |
| if (global_rsv->reserved < min_bytes + ticket->bytes) { |
| spin_unlock(&global_rsv->lock); |
| return false; |
| } |
| global_rsv->reserved -= ticket->bytes; |
| remove_ticket(space_info, ticket); |
| ticket->bytes = 0; |
| wake_up(&ticket->wait); |
| space_info->tickets_id++; |
| if (global_rsv->reserved < global_rsv->size) |
| global_rsv->full = 0; |
| spin_unlock(&global_rsv->lock); |
| |
| return true; |
| } |
| |
| /* |
| * maybe_fail_all_tickets - we've exhausted our flushing, start failing tickets |
| * @fs_info - fs_info for this fs |
| * @space_info - the space info we were flushing |
| * |
| * We call this when we've exhausted our flushing ability and haven't made |
| * progress in satisfying tickets. The reservation code handles tickets in |
| * order, so if there is a large ticket first and then smaller ones we could |
| * very well satisfy the smaller tickets. This will attempt to wake up any |
| * tickets in the list to catch this case. |
| * |
| * This function returns true if it was able to make progress by clearing out |
| * other tickets, or if it stumbles across a ticket that was smaller than the |
| * first ticket. |
| */ |
| static bool maybe_fail_all_tickets(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info) |
| { |
| struct reserve_ticket *ticket; |
| u64 tickets_id = space_info->tickets_id; |
| const bool aborted = BTRFS_FS_ERROR(fs_info); |
| |
| trace_btrfs_fail_all_tickets(fs_info, space_info); |
| |
| if (btrfs_test_opt(fs_info, ENOSPC_DEBUG)) { |
| btrfs_info(fs_info, "cannot satisfy tickets, dumping space info"); |
| __btrfs_dump_space_info(fs_info, space_info); |
| } |
| |
| while (!list_empty(&space_info->tickets) && |
| tickets_id == space_info->tickets_id) { |
| ticket = list_first_entry(&space_info->tickets, |
| struct reserve_ticket, list); |
| |
| if (!aborted && steal_from_global_rsv(fs_info, space_info, ticket)) |
| return true; |
| |
| if (!aborted && btrfs_test_opt(fs_info, ENOSPC_DEBUG)) |
| btrfs_info(fs_info, "failing ticket with %llu bytes", |
| ticket->bytes); |
| |
| remove_ticket(space_info, ticket); |
| if (aborted) |
| ticket->error = -EIO; |
| else |
| ticket->error = -ENOSPC; |
| wake_up(&ticket->wait); |
| |
| /* |
| * We're just throwing tickets away, so more flushing may not |
| * trip over btrfs_try_granting_tickets, so we need to call it |
| * here to see if we can make progress with the next ticket in |
| * the list. |
| */ |
| if (!aborted) |
| btrfs_try_granting_tickets(fs_info, space_info); |
| } |
| return (tickets_id != space_info->tickets_id); |
| } |
| |
| /* |
| * This is for normal flushers, we can wait all goddamned day if we want to. We |
| * will loop and continuously try to flush as long as we are making progress. |
| * We count progress as clearing off tickets each time we have to loop. |
| */ |
| static void btrfs_async_reclaim_metadata_space(struct work_struct *work) |
| { |
| struct btrfs_fs_info *fs_info; |
| struct btrfs_space_info *space_info; |
| u64 to_reclaim; |
| enum btrfs_flush_state flush_state; |
| int commit_cycles = 0; |
| u64 last_tickets_id; |
| |
| fs_info = container_of(work, struct btrfs_fs_info, async_reclaim_work); |
| space_info = btrfs_find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA); |
| |
| spin_lock(&space_info->lock); |
| to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info, space_info); |
| if (!to_reclaim) { |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| last_tickets_id = space_info->tickets_id; |
| spin_unlock(&space_info->lock); |
| |
| flush_state = FLUSH_DELAYED_ITEMS_NR; |
| do { |
| flush_space(fs_info, space_info, to_reclaim, flush_state, false); |
| spin_lock(&space_info->lock); |
| if (list_empty(&space_info->tickets)) { |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info, |
| space_info); |
| if (last_tickets_id == space_info->tickets_id) { |
| flush_state++; |
| } else { |
| last_tickets_id = space_info->tickets_id; |
| flush_state = FLUSH_DELAYED_ITEMS_NR; |
| if (commit_cycles) |
| commit_cycles--; |
| } |
| |
| /* |
| * We do not want to empty the system of delalloc unless we're |
| * under heavy pressure, so allow one trip through the flushing |
| * logic before we start doing a FLUSH_DELALLOC_FULL. |
| */ |
| if (flush_state == FLUSH_DELALLOC_FULL && !commit_cycles) |
| flush_state++; |
| |
| /* |
| * We don't want to force a chunk allocation until we've tried |
| * pretty hard to reclaim space. Think of the case where we |
| * freed up a bunch of space and so have a lot of pinned space |
| * to reclaim. We would rather use that than possibly create a |
| * underutilized metadata chunk. So if this is our first run |
| * through the flushing state machine skip ALLOC_CHUNK_FORCE and |
| * commit the transaction. If nothing has changed the next go |
| * around then we can force a chunk allocation. |
| */ |
| if (flush_state == ALLOC_CHUNK_FORCE && !commit_cycles) |
| flush_state++; |
| |
| if (flush_state > COMMIT_TRANS) { |
| commit_cycles++; |
| if (commit_cycles > 2) { |
| if (maybe_fail_all_tickets(fs_info, space_info)) { |
| flush_state = FLUSH_DELAYED_ITEMS_NR; |
| commit_cycles--; |
| } else { |
| space_info->flush = 0; |
| } |
| } else { |
| flush_state = FLUSH_DELAYED_ITEMS_NR; |
| } |
| } |
| spin_unlock(&space_info->lock); |
| } while (flush_state <= COMMIT_TRANS); |
| } |
| |
| /* |
| * This handles pre-flushing of metadata space before we get to the point that |
| * we need to start blocking threads on tickets. The logic here is different |
| * from the other flush paths because it doesn't rely on tickets to tell us how |
| * much we need to flush, instead it attempts to keep us below the 80% full |
| * watermark of space by flushing whichever reservation pool is currently the |
| * largest. |
| */ |
| static void btrfs_preempt_reclaim_metadata_space(struct work_struct *work) |
| { |
| struct btrfs_fs_info *fs_info; |
| struct btrfs_space_info *space_info; |
| struct btrfs_block_rsv *delayed_block_rsv; |
| struct btrfs_block_rsv *delayed_refs_rsv; |
| struct btrfs_block_rsv *global_rsv; |
| struct btrfs_block_rsv *trans_rsv; |
| int loops = 0; |
| |
| fs_info = container_of(work, struct btrfs_fs_info, |
| preempt_reclaim_work); |
| space_info = btrfs_find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA); |
| delayed_block_rsv = &fs_info->delayed_block_rsv; |
| delayed_refs_rsv = &fs_info->delayed_refs_rsv; |
| global_rsv = &fs_info->global_block_rsv; |
| trans_rsv = &fs_info->trans_block_rsv; |
| |
| spin_lock(&space_info->lock); |
| while (need_preemptive_reclaim(fs_info, space_info)) { |
| enum btrfs_flush_state flush; |
| u64 delalloc_size = 0; |
| u64 to_reclaim, block_rsv_size; |
| u64 global_rsv_size = global_rsv->reserved; |
| |
| loops++; |
| |
| /* |
| * We don't have a precise counter for the metadata being |
| * reserved for delalloc, so we'll approximate it by subtracting |
| * out the block rsv's space from the bytes_may_use. If that |
| * amount is higher than the individual reserves, then we can |
| * assume it's tied up in delalloc reservations. |
| */ |
| block_rsv_size = global_rsv_size + |
| delayed_block_rsv->reserved + |
| delayed_refs_rsv->reserved + |
| trans_rsv->reserved; |
| if (block_rsv_size < space_info->bytes_may_use) |
| delalloc_size = space_info->bytes_may_use - block_rsv_size; |
| |
| /* |
| * We don't want to include the global_rsv in our calculation, |
| * because that's space we can't touch. Subtract it from the |
| * block_rsv_size for the next checks. |
| */ |
| block_rsv_size -= global_rsv_size; |
| |
| /* |
| * We really want to avoid flushing delalloc too much, as it |
| * could result in poor allocation patterns, so only flush it if |
| * it's larger than the rest of the pools combined. |
| */ |
| if (delalloc_size > block_rsv_size) { |
| to_reclaim = delalloc_size; |
| flush = FLUSH_DELALLOC; |
| } else if (space_info->bytes_pinned > |
| (delayed_block_rsv->reserved + |
| delayed_refs_rsv->reserved)) { |
| to_reclaim = space_info->bytes_pinned; |
| flush = COMMIT_TRANS; |
| } else if (delayed_block_rsv->reserved > |
| delayed_refs_rsv->reserved) { |
| to_reclaim = delayed_block_rsv->reserved; |
| flush = FLUSH_DELAYED_ITEMS_NR; |
| } else { |
| to_reclaim = delayed_refs_rsv->reserved; |
| flush = FLUSH_DELAYED_REFS_NR; |
| } |
| |
| spin_unlock(&space_info->lock); |
| |
| /* |
| * We don't want to reclaim everything, just a portion, so scale |
| * down the to_reclaim by 1/4. If it takes us down to 0, |
| * reclaim 1 items worth. |
| */ |
| to_reclaim >>= 2; |
| if (!to_reclaim) |
| to_reclaim = btrfs_calc_insert_metadata_size(fs_info, 1); |
| flush_space(fs_info, space_info, to_reclaim, flush, true); |
| cond_resched(); |
| spin_lock(&space_info->lock); |
| } |
| |
| /* We only went through once, back off our clamping. */ |
| if (loops == 1 && !space_info->reclaim_size) |
| space_info->clamp = max(1, space_info->clamp - 1); |
| trace_btrfs_done_preemptive_reclaim(fs_info, space_info); |
| spin_unlock(&space_info->lock); |
| } |
| |
| /* |
| * FLUSH_DELALLOC_WAIT: |
| * Space is freed from flushing delalloc in one of two ways. |
| * |
| * 1) compression is on and we allocate less space than we reserved |
| * 2) we are overwriting existing space |
| * |
| * For #1 that extra space is reclaimed as soon as the delalloc pages are |
| * COWed, by way of btrfs_add_reserved_bytes() which adds the actual extent |
| * length to ->bytes_reserved, and subtracts the reserved space from |
| * ->bytes_may_use. |
| * |
| * For #2 this is trickier. Once the ordered extent runs we will drop the |
| * extent in the range we are overwriting, which creates a delayed ref for |
| * that freed extent. This however is not reclaimed until the transaction |
| * commits, thus the next stages. |
| * |
| * RUN_DELAYED_IPUTS |
| * If we are freeing inodes, we want to make sure all delayed iputs have |
| * completed, because they could have been on an inode with i_nlink == 0, and |
| * thus have been truncated and freed up space. But again this space is not |
| * immediately re-usable, it comes in the form of a delayed ref, which must be |
| * run and then the transaction must be committed. |
| * |
| * COMMIT_TRANS |
| * This is where we reclaim all of the pinned space generated by running the |
| * iputs |
| * |
| * ALLOC_CHUNK_FORCE |
| * For data we start with alloc chunk force, however we could have been full |
| * before, and then the transaction commit could have freed new block groups, |
| * so if we now have space to allocate do the force chunk allocation. |
| */ |
| static const enum btrfs_flush_state data_flush_states[] = { |
| FLUSH_DELALLOC_FULL, |
| RUN_DELAYED_IPUTS, |
| COMMIT_TRANS, |
| ALLOC_CHUNK_FORCE, |
| }; |
| |
| static void btrfs_async_reclaim_data_space(struct work_struct *work) |
| { |
| struct btrfs_fs_info *fs_info; |
| struct btrfs_space_info *space_info; |
| u64 last_tickets_id; |
| enum btrfs_flush_state flush_state = 0; |
| |
| fs_info = container_of(work, struct btrfs_fs_info, async_data_reclaim_work); |
| space_info = fs_info->data_sinfo; |
| |
| spin_lock(&space_info->lock); |
| if (list_empty(&space_info->tickets)) { |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| last_tickets_id = space_info->tickets_id; |
| spin_unlock(&space_info->lock); |
| |
| while (!space_info->full) { |
| flush_space(fs_info, space_info, U64_MAX, ALLOC_CHUNK_FORCE, false); |
| spin_lock(&space_info->lock); |
| if (list_empty(&space_info->tickets)) { |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| |
| /* Something happened, fail everything and bail. */ |
| if (BTRFS_FS_ERROR(fs_info)) |
| goto aborted_fs; |
| last_tickets_id = space_info->tickets_id; |
| spin_unlock(&space_info->lock); |
| } |
| |
| while (flush_state < ARRAY_SIZE(data_flush_states)) { |
| flush_space(fs_info, space_info, U64_MAX, |
| data_flush_states[flush_state], false); |
| spin_lock(&space_info->lock); |
| if (list_empty(&space_info->tickets)) { |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| |
| if (last_tickets_id == space_info->tickets_id) { |
| flush_state++; |
| } else { |
| last_tickets_id = space_info->tickets_id; |
| flush_state = 0; |
| } |
| |
| if (flush_state >= ARRAY_SIZE(data_flush_states)) { |
| if (space_info->full) { |
| if (maybe_fail_all_tickets(fs_info, space_info)) |
| flush_state = 0; |
| else |
| space_info->flush = 0; |
| } else { |
| flush_state = 0; |
| } |
| |
| /* Something happened, fail everything and bail. */ |
| if (BTRFS_FS_ERROR(fs_info)) |
| goto aborted_fs; |
| |
| } |
| spin_unlock(&space_info->lock); |
| } |
| return; |
| |
| aborted_fs: |
| maybe_fail_all_tickets(fs_info, space_info); |
| space_info->flush = 0; |
| spin_unlock(&space_info->lock); |
| } |
| |
| void btrfs_init_async_reclaim_work(struct btrfs_fs_info *fs_info) |
| { |
| INIT_WORK(&fs_info->async_reclaim_work, btrfs_async_reclaim_metadata_space); |
| INIT_WORK(&fs_info->async_data_reclaim_work, btrfs_async_reclaim_data_space); |
| INIT_WORK(&fs_info->preempt_reclaim_work, |
| btrfs_preempt_reclaim_metadata_space); |
| } |
| |
| static const enum btrfs_flush_state priority_flush_states[] = { |
| FLUSH_DELAYED_ITEMS_NR, |
| FLUSH_DELAYED_ITEMS, |
| ALLOC_CHUNK, |
| }; |
| |
| static const enum btrfs_flush_state evict_flush_states[] = { |
| FLUSH_DELAYED_ITEMS_NR, |
| FLUSH_DELAYED_ITEMS, |
| FLUSH_DELAYED_REFS_NR, |
| FLUSH_DELAYED_REFS, |
| FLUSH_DELALLOC, |
| FLUSH_DELALLOC_WAIT, |
| FLUSH_DELALLOC_FULL, |
| ALLOC_CHUNK, |
| COMMIT_TRANS, |
| }; |
| |
| static void priority_reclaim_metadata_space(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket, |
| const enum btrfs_flush_state *states, |
| int states_nr) |
| { |
| u64 to_reclaim; |
| int flush_state = 0; |
| |
| spin_lock(&space_info->lock); |
| to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info, space_info); |
| /* |
| * This is the priority reclaim path, so to_reclaim could be >0 still |
| * because we may have only satisfied the priority tickets and still |
| * left non priority tickets on the list. We would then have |
| * to_reclaim but ->bytes == 0. |
| */ |
| if (ticket->bytes == 0) { |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| |
| while (flush_state < states_nr) { |
| spin_unlock(&space_info->lock); |
| flush_space(fs_info, space_info, to_reclaim, states[flush_state], |
| false); |
| flush_state++; |
| spin_lock(&space_info->lock); |
| if (ticket->bytes == 0) { |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| } |
| |
| /* Attempt to steal from the global rsv if we can. */ |
| if (!steal_from_global_rsv(fs_info, space_info, ticket)) { |
| ticket->error = -ENOSPC; |
| remove_ticket(space_info, ticket); |
| } |
| |
| /* |
| * We must run try_granting_tickets here because we could be a large |
| * ticket in front of a smaller ticket that can now be satisfied with |
| * the available space. |
| */ |
| btrfs_try_granting_tickets(fs_info, space_info); |
| spin_unlock(&space_info->lock); |
| } |
| |
| static void priority_reclaim_data_space(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket) |
| { |
| spin_lock(&space_info->lock); |
| |
| /* We could have been granted before we got here. */ |
| if (ticket->bytes == 0) { |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| |
| while (!space_info->full) { |
| spin_unlock(&space_info->lock); |
| flush_space(fs_info, space_info, U64_MAX, ALLOC_CHUNK_FORCE, false); |
| spin_lock(&space_info->lock); |
| if (ticket->bytes == 0) { |
| spin_unlock(&space_info->lock); |
| return; |
| } |
| } |
| |
| ticket->error = -ENOSPC; |
| remove_ticket(space_info, ticket); |
| btrfs_try_granting_tickets(fs_info, space_info); |
| spin_unlock(&space_info->lock); |
| } |
| |
| static void wait_reserve_ticket(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket) |
| |
| { |
| DEFINE_WAIT(wait); |
| int ret = 0; |
| |
| spin_lock(&space_info->lock); |
| while (ticket->bytes > 0 && ticket->error == 0) { |
| ret = prepare_to_wait_event(&ticket->wait, &wait, TASK_KILLABLE); |
| if (ret) { |
| /* |
| * Delete us from the list. After we unlock the space |
| * info, we don't want the async reclaim job to reserve |
| * space for this ticket. If that would happen, then the |
| * ticket's task would not known that space was reserved |
| * despite getting an error, resulting in a space leak |
| * (bytes_may_use counter of our space_info). |
| */ |
| remove_ticket(space_info, ticket); |
| ticket->error = -EINTR; |
| break; |
| } |
| spin_unlock(&space_info->lock); |
| |
| schedule(); |
| |
| finish_wait(&ticket->wait, &wait); |
| spin_lock(&space_info->lock); |
| } |
| spin_unlock(&space_info->lock); |
| } |
| |
| /* |
| * Do the appropriate flushing and waiting for a ticket. |
| * |
| * @fs_info: the filesystem |
| * @space_info: space info for the reservation |
| * @ticket: ticket for the reservation |
| * @start_ns: timestamp when the reservation started |
| * @orig_bytes: amount of bytes originally reserved |
| * @flush: how much we can flush |
| * |
| * This does the work of figuring out how to flush for the ticket, waiting for |
| * the reservation, and returning the appropriate error if there is one. |
| */ |
| static int handle_reserve_ticket(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, |
| struct reserve_ticket *ticket, |
| u64 start_ns, u64 orig_bytes, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| int ret; |
| |
| switch (flush) { |
| case BTRFS_RESERVE_FLUSH_DATA: |
| case BTRFS_RESERVE_FLUSH_ALL: |
| case BTRFS_RESERVE_FLUSH_ALL_STEAL: |
| wait_reserve_ticket(fs_info, space_info, ticket); |
| break; |
| case BTRFS_RESERVE_FLUSH_LIMIT: |
| priority_reclaim_metadata_space(fs_info, space_info, ticket, |
| priority_flush_states, |
| ARRAY_SIZE(priority_flush_states)); |
| break; |
| case BTRFS_RESERVE_FLUSH_EVICT: |
| priority_reclaim_metadata_space(fs_info, space_info, ticket, |
| evict_flush_states, |
| ARRAY_SIZE(evict_flush_states)); |
| break; |
| case BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE: |
| priority_reclaim_data_space(fs_info, space_info, ticket); |
| break; |
| default: |
| ASSERT(0); |
| break; |
| } |
| |
| ret = ticket->error; |
| ASSERT(list_empty(&ticket->list)); |
| /* |
| * Check that we can't have an error set if the reservation succeeded, |
| * as that would confuse tasks and lead them to error out without |
| * releasing reserved space (if an error happens the expectation is that |
| * space wasn't reserved at all). |
| */ |
| ASSERT(!(ticket->bytes == 0 && ticket->error)); |
| trace_btrfs_reserve_ticket(fs_info, space_info->flags, orig_bytes, |
| start_ns, flush, ticket->error); |
| return ret; |
| } |
| |
| /* |
| * This returns true if this flush state will go through the ordinary flushing |
| * code. |
| */ |
| static inline bool is_normal_flushing(enum btrfs_reserve_flush_enum flush) |
| { |
| return (flush == BTRFS_RESERVE_FLUSH_ALL) || |
| (flush == BTRFS_RESERVE_FLUSH_ALL_STEAL); |
| } |
| |
| static inline void maybe_clamp_preempt(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info) |
| { |
| u64 ordered = percpu_counter_sum_positive(&fs_info->ordered_bytes); |
| u64 delalloc = percpu_counter_sum_positive(&fs_info->delalloc_bytes); |
| |
| /* |
| * If we're heavy on ordered operations then clamping won't help us. We |
| * need to clamp specifically to keep up with dirty'ing buffered |
| * writers, because there's not a 1:1 correlation of writing delalloc |
| * and freeing space, like there is with flushing delayed refs or |
| * delayed nodes. If we're already more ordered than delalloc then |
| * we're keeping up, otherwise we aren't and should probably clamp. |
| */ |
| if (ordered < delalloc) |
| space_info->clamp = min(space_info->clamp + 1, 8); |
| } |
| |
| static inline bool can_steal(enum btrfs_reserve_flush_enum flush) |
| { |
| return (flush == BTRFS_RESERVE_FLUSH_ALL_STEAL || |
| flush == BTRFS_RESERVE_FLUSH_EVICT); |
| } |
| |
| /* |
| * NO_FLUSH and FLUSH_EMERGENCY don't want to create a ticket, they just want to |
| * fail as quickly as possible. |
| */ |
| static inline bool can_ticket(enum btrfs_reserve_flush_enum flush) |
| { |
| return (flush != BTRFS_RESERVE_NO_FLUSH && |
| flush != BTRFS_RESERVE_FLUSH_EMERGENCY); |
| } |
| |
| /* |
| * Try to reserve bytes from the block_rsv's space. |
| * |
| * @fs_info: the filesystem |
| * @space_info: space info we want to allocate from |
| * @orig_bytes: number of bytes we want |
| * @flush: whether or not we can flush to make our reservation |
| * |
| * This will reserve orig_bytes number of bytes from the space info associated |
| * with the block_rsv. If there is not enough space it will make an attempt to |
| * flush out space to make room. It will do this by flushing delalloc if |
| * possible or committing the transaction. If flush is 0 then no attempts to |
| * regain reservations will be made and this will fail if there is not enough |
| * space already. |
| */ |
| static int __reserve_bytes(struct btrfs_fs_info *fs_info, |
| struct btrfs_space_info *space_info, u64 orig_bytes, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| struct work_struct *async_work; |
| struct reserve_ticket ticket; |
| u64 start_ns = 0; |
| u64 used; |
| int ret = 0; |
| bool pending_tickets; |
| |
| ASSERT(orig_bytes); |
| ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_ALL); |
| |
| if (flush == BTRFS_RESERVE_FLUSH_DATA) |
| async_work = &fs_info->async_data_reclaim_work; |
| else |
| async_work = &fs_info->async_reclaim_work; |
| |
| spin_lock(&space_info->lock); |
| ret = -ENOSPC; |
| used = btrfs_space_info_used(space_info, true); |
| |
| /* |
| * We don't want NO_FLUSH allocations to jump everybody, they can |
| * generally handle ENOSPC in a different way, so treat them the same as |
| * normal flushers when it comes to skipping pending tickets. |
| */ |
| if (is_normal_flushing(flush) || (flush == BTRFS_RESERVE_NO_FLUSH)) |
| pending_tickets = !list_empty(&space_info->tickets) || |
| !list_empty(&space_info->priority_tickets); |
| else |
| pending_tickets = !list_empty(&space_info->priority_tickets); |
| |
| /* |
| * Carry on if we have enough space (short-circuit) OR call |
| * can_overcommit() to ensure we can overcommit to continue. |
| */ |
| if (!pending_tickets && |
| ((used + orig_bytes <= space_info->total_bytes) || |
| btrfs_can_overcommit(fs_info, space_info, orig_bytes, flush))) { |
| btrfs_space_info_update_bytes_may_use(fs_info, space_info, |
| orig_bytes); |
| ret = 0; |
| } |
| |
| /* |
| * Things are dire, we need to make a reservation so we don't abort. We |
| * will let this reservation go through as long as we have actual space |
| * left to allocate for the block. |
| */ |
| if (ret && unlikely(flush == BTRFS_RESERVE_FLUSH_EMERGENCY)) { |
| used = btrfs_space_info_used(space_info, false); |
| if (used + orig_bytes <= space_info->total_bytes) { |
| btrfs_space_info_update_bytes_may_use(fs_info, space_info, |
| orig_bytes); |
| ret = 0; |
| } |
| } |
| |
| /* |
| * If we couldn't make a reservation then setup our reservation ticket |
| * and kick the async worker if it's not already running. |
| * |
| * If we are a priority flusher then we just need to add our ticket to |
| * the list and we will do our own flushing further down. |
| */ |
| if (ret && can_ticket(flush)) { |
| ticket.bytes = orig_bytes; |
| ticket.error = 0; |
| space_info->reclaim_size += ticket.bytes; |
| init_waitqueue_head(&ticket.wait); |
| ticket.steal = can_steal(flush); |
| if (trace_btrfs_reserve_ticket_enabled()) |
| start_ns = ktime_get_ns(); |
| |
| if (flush == BTRFS_RESERVE_FLUSH_ALL || |
| flush == BTRFS_RESERVE_FLUSH_ALL_STEAL || |
| flush == BTRFS_RESERVE_FLUSH_DATA) { |
| list_add_tail(&ticket.list, &space_info->tickets); |
| if (!space_info->flush) { |
| /* |
| * We were forced to add a reserve ticket, so |
| * our preemptive flushing is unable to keep |
| * up. Clamp down on the threshold for the |
| * preemptive flushing in order to keep up with |
| * the workload. |
| */ |
| maybe_clamp_preempt(fs_info, space_info); |
| |
| space_info->flush = 1; |
| trace_btrfs_trigger_flush(fs_info, |
| space_info->flags, |
| orig_bytes, flush, |
| "enospc"); |
| queue_work(system_unbound_wq, async_work); |
| } |
| } else { |
| list_add_tail(&ticket.list, |
| &space_info->priority_tickets); |
| } |
| } else if (!ret && space_info->flags & BTRFS_BLOCK_GROUP_METADATA) { |
| /* |
| * We will do the space reservation dance during log replay, |
| * which means we won't have fs_info->fs_root set, so don't do |
| * the async reclaim as we will panic. |
| */ |
| if (!test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags) && |
| !work_busy(&fs_info->preempt_reclaim_work) && |
| need_preemptive_reclaim(fs_info, space_info)) { |
| trace_btrfs_trigger_flush(fs_info, space_info->flags, |
| orig_bytes, flush, "preempt"); |
| queue_work(system_unbound_wq, |
| &fs_info->preempt_reclaim_work); |
| } |
| } |
| spin_unlock(&space_info->lock); |
| if (!ret || !can_ticket(flush)) |
| return ret; |
| |
| return handle_reserve_ticket(fs_info, space_info, &ticket, start_ns, |
| orig_bytes, flush); |
| } |
| |
| /* |
| * Try to reserve metadata bytes from the block_rsv's space. |
| * |
| * @fs_info: the filesystem |
| * @block_rsv: block_rsv we're allocating for |
| * @orig_bytes: number of bytes we want |
| * @flush: whether or not we can flush to make our reservation |
| * |
| * This will reserve orig_bytes number of bytes from the space info associated |
| * with the block_rsv. If there is not enough space it will make an attempt to |
| * flush out space to make room. It will do this by flushing delalloc if |
| * possible or committing the transaction. If flush is 0 then no attempts to |
| * regain reservations will be made and this will fail if there is not enough |
| * space already. |
| */ |
| int btrfs_reserve_metadata_bytes(struct btrfs_fs_info *fs_info, |
| struct btrfs_block_rsv *block_rsv, |
| u64 orig_bytes, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| int ret; |
| |
| ret = __reserve_bytes(fs_info, block_rsv->space_info, orig_bytes, flush); |
| if (ret == -ENOSPC) { |
| trace_btrfs_space_reservation(fs_info, "space_info:enospc", |
| block_rsv->space_info->flags, |
| orig_bytes, 1); |
| |
| if (btrfs_test_opt(fs_info, ENOSPC_DEBUG)) |
| btrfs_dump_space_info(fs_info, block_rsv->space_info, |
| orig_bytes, 0); |
| } |
| return ret; |
| } |
| |
| /* |
| * Try to reserve data bytes for an allocation. |
| * |
| * @fs_info: the filesystem |
| * @bytes: number of bytes we need |
| * @flush: how we are allowed to flush |
| * |
| * This will reserve bytes from the data space info. If there is not enough |
| * space then we will attempt to flush space as specified by flush. |
| */ |
| int btrfs_reserve_data_bytes(struct btrfs_fs_info *fs_info, u64 bytes, |
| enum btrfs_reserve_flush_enum flush) |
| { |
| struct btrfs_space_info *data_sinfo = fs_info->data_sinfo; |
| int ret; |
| |
| ASSERT(flush == BTRFS_RESERVE_FLUSH_DATA || |
| flush == BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE || |
| flush == BTRFS_RESERVE_NO_FLUSH); |
| ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA); |
| |
| ret = __reserve_bytes(fs_info, data_sinfo, bytes, flush); |
| if (ret == -ENOSPC) { |
| trace_btrfs_space_reservation(fs_info, "space_info:enospc", |
| data_sinfo->flags, bytes, 1); |
| if (btrfs_test_opt(fs_info, ENOSPC_DEBUG)) |
| btrfs_dump_space_info(fs_info, data_sinfo, bytes, 0); |
| } |
| return ret; |
| } |
| |
| /* Dump all the space infos when we abort a transaction due to ENOSPC. */ |
| __cold void btrfs_dump_space_info_for_trans_abort(struct btrfs_fs_info *fs_info) |
| { |
| struct btrfs_space_info *space_info; |
| |
| btrfs_info(fs_info, "dumping space info:"); |
| list_for_each_entry(space_info, &fs_info->space_info, list) { |
| spin_lock(&space_info->lock); |
| __btrfs_dump_space_info(fs_info, space_info); |
| spin_unlock(&space_info->lock); |
| } |
| dump_global_block_rsv(fs_info); |
| } |
| |
| /* |
| * Account the unused space of all the readonly block group in the space_info. |
| * takes mirrors into account. |
| */ |
| u64 btrfs_account_ro_block_groups_free_space(struct btrfs_space_info *sinfo) |
| { |
| struct btrfs_block_group *block_group; |
| u64 free_bytes = 0; |
| int factor; |
| |
| /* It's df, we don't care if it's racy */ |
| if (list_empty(&sinfo->ro_bgs)) |
| return 0; |
| |
| spin_lock(&sinfo->lock); |
| list_for_each_entry(block_group, &sinfo->ro_bgs, ro_list) { |
| spin_lock(&block_group->lock); |
| |
| if (!block_group->ro) { |
| spin_unlock(&block_group->lock); |
| continue; |
| } |
| |
| factor = btrfs_bg_type_to_factor(block_group->flags); |
| free_bytes += (block_group->length - |
| block_group->used) * factor; |
| |
| spin_unlock(&block_group->lock); |
| } |
| spin_unlock(&sinfo->lock); |
| |
| return free_bytes; |
| } |