| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * Based on arch/arm/include/asm/tlbflush.h | |
| * | |
| * Copyright (C) 1999-2003 Russell King | |
| * Copyright (C) 2012 ARM Ltd. | |
| */ | |
| #ifndef __ASM_TLBFLUSH_H | |
| #define __ASM_TLBFLUSH_H | |
| #ifndef __ASSEMBLY__ | |
| #include <linux/bitfield.h> | |
| #include <linux/mm_types.h> | |
| #include <linux/sched.h> | |
| #include <asm/cputype.h> | |
| #include <asm/mmu.h> | |
| /* | |
| * Raw TLBI operations. | |
| * | |
| * Where necessary, use the __tlbi() macro to avoid asm() | |
| * boilerplate. Drivers and most kernel code should use the TLB | |
| * management routines in preference to the macro below. | |
| * | |
| * The macro can be used as __tlbi(op) or __tlbi(op, arg), depending | |
| * on whether a particular TLBI operation takes an argument or | |
| * not. The macros handles invoking the asm with or without the | |
| * register argument as appropriate. | |
| */ | |
| #define __TLBI_0(op, arg) asm (ARM64_ASM_PREAMBLE \ | |
| "tlbi " #op "\n" \ | |
| ALTERNATIVE("nop\n nop", \ | |
| "dsb ish\n tlbi " #op, \ | |
| ARM64_WORKAROUND_REPEAT_TLBI, \ | |
| CONFIG_ARM64_WORKAROUND_REPEAT_TLBI) \ | |
| : : ) | |
| #define __TLBI_1(op, arg) asm (ARM64_ASM_PREAMBLE \ | |
| "tlbi " #op ", %0\n" \ | |
| ALTERNATIVE("nop\n nop", \ | |
| "dsb ish\n tlbi " #op ", %0", \ | |
| ARM64_WORKAROUND_REPEAT_TLBI, \ | |
| CONFIG_ARM64_WORKAROUND_REPEAT_TLBI) \ | |
| : : "r" (arg)) | |
| #define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) | |
| #define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) | |
| #define __tlbi_user(op, arg) do { \ | |
| if (arm64_kernel_unmapped_at_el0()) \ | |
| __tlbi(op, (arg) | USER_ASID_FLAG); \ | |
| } while (0) | |
| /* This macro creates a properly formatted VA operand for the TLBI */ | |
| #define __TLBI_VADDR(addr, asid) \ | |
| ({ \ | |
| unsigned long __ta = (addr) >> 12; \ | |
| __ta &= GENMASK_ULL(43, 0); \ | |
| __ta |= (unsigned long)(asid) << 48; \ | |
| __ta; \ | |
| }) | |
| /* | |
| * Get translation granule of the system, which is decided by | |
| * PAGE_SIZE. Used by TTL. | |
| * - 4KB : 1 | |
| * - 16KB : 2 | |
| * - 64KB : 3 | |
| */ | |
| #define TLBI_TTL_TG_4K 1 | |
| #define TLBI_TTL_TG_16K 2 | |
| #define TLBI_TTL_TG_64K 3 | |
| static inline unsigned long get_trans_granule(void) | |
| { | |
| switch (PAGE_SIZE) { | |
| case SZ_4K: | |
| return TLBI_TTL_TG_4K; | |
| case SZ_16K: | |
| return TLBI_TTL_TG_16K; | |
| case SZ_64K: | |
| return TLBI_TTL_TG_64K; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* | |
| * Level-based TLBI operations. | |
| * | |
| * When ARMv8.4-TTL exists, TLBI operations take an additional hint for | |
| * the level at which the invalidation must take place. If the level is | |
| * wrong, no invalidation may take place. In the case where the level | |
| * cannot be easily determined, a 0 value for the level parameter will | |
| * perform a non-hinted invalidation. | |
| * | |
| * For Stage-2 invalidation, use the level values provided to that effect | |
| * in asm/stage2_pgtable.h. | |
| */ | |
| #define TLBI_TTL_MASK GENMASK_ULL(47, 44) | |
| #define __tlbi_level(op, addr, level) do { \ | |
| u64 arg = addr; \ | |
| \ | |
| if (cpus_have_const_cap(ARM64_HAS_ARMv8_4_TTL) && \ | |
| level) { \ | |
| u64 ttl = level & 3; \ | |
| ttl |= get_trans_granule() << 2; \ | |
| arg &= ~TLBI_TTL_MASK; \ | |
| arg |= FIELD_PREP(TLBI_TTL_MASK, ttl); \ | |
| } \ | |
| \ | |
| __tlbi(op, arg); \ | |
| } while(0) | |
| #define __tlbi_user_level(op, arg, level) do { \ | |
| if (arm64_kernel_unmapped_at_el0()) \ | |
| __tlbi_level(op, (arg | USER_ASID_FLAG), level); \ | |
| } while (0) | |
| /* | |
| * This macro creates a properly formatted VA operand for the TLB RANGE. | |
| * The value bit assignments are: | |
| * | |
| * +----------+------+-------+-------+-------+----------------------+ | |
| * | ASID | TG | SCALE | NUM | TTL | BADDR | | |
| * +-----------------+-------+-------+-------+----------------------+ | |
| * |63 48|47 46|45 44|43 39|38 37|36 0| | |
| * | |
| * The address range is determined by below formula: | |
| * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE) | |
| * | |
| */ | |
| #define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl) \ | |
| ({ \ | |
| unsigned long __ta = (addr) >> PAGE_SHIFT; \ | |
| __ta &= GENMASK_ULL(36, 0); \ | |
| __ta |= (unsigned long)(ttl) << 37; \ | |
| __ta |= (unsigned long)(num) << 39; \ | |
| __ta |= (unsigned long)(scale) << 44; \ | |
| __ta |= get_trans_granule() << 46; \ | |
| __ta |= (unsigned long)(asid) << 48; \ | |
| __ta; \ | |
| }) | |
| /* These macros are used by the TLBI RANGE feature. */ | |
| #define __TLBI_RANGE_PAGES(num, scale) \ | |
| ((unsigned long)((num) + 1) << (5 * (scale) + 1)) | |
| #define MAX_TLBI_RANGE_PAGES __TLBI_RANGE_PAGES(31, 3) | |
| /* | |
| * Generate 'num' values from -1 to 30 with -1 rejected by the | |
| * __flush_tlb_range() loop below. | |
| */ | |
| #define TLBI_RANGE_MASK GENMASK_ULL(4, 0) | |
| #define __TLBI_RANGE_NUM(pages, scale) \ | |
| ((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1) | |
| /* | |
| * TLB Invalidation | |
| * ================ | |
| * | |
| * This header file implements the low-level TLB invalidation routines | |
| * (sometimes referred to as "flushing" in the kernel) for arm64. | |
| * | |
| * Every invalidation operation uses the following template: | |
| * | |
| * DSB ISHST // Ensure prior page-table updates have completed | |
| * TLBI ... // Invalidate the TLB | |
| * DSB ISH // Ensure the TLB invalidation has completed | |
| * if (invalidated kernel mappings) | |
| * ISB // Discard any instructions fetched from the old mapping | |
| * | |
| * | |
| * The following functions form part of the "core" TLB invalidation API, | |
| * as documented in Documentation/core-api/cachetlb.rst: | |
| * | |
| * flush_tlb_all() | |
| * Invalidate the entire TLB (kernel + user) on all CPUs | |
| * | |
| * flush_tlb_mm(mm) | |
| * Invalidate an entire user address space on all CPUs. | |
| * The 'mm' argument identifies the ASID to invalidate. | |
| * | |
| * flush_tlb_range(vma, start, end) | |
| * Invalidate the virtual-address range '[start, end)' on all | |
| * CPUs for the user address space corresponding to 'vma->mm'. | |
| * Note that this operation also invalidates any walk-cache | |
| * entries associated with translations for the specified address | |
| * range. | |
| * | |
| * flush_tlb_kernel_range(start, end) | |
| * Same as flush_tlb_range(..., start, end), but applies to | |
| * kernel mappings rather than a particular user address space. | |
| * Whilst not explicitly documented, this function is used when | |
| * unmapping pages from vmalloc/io space. | |
| * | |
| * flush_tlb_page(vma, addr) | |
| * Invalidate a single user mapping for address 'addr' in the | |
| * address space corresponding to 'vma->mm'. Note that this | |
| * operation only invalidates a single, last-level page-table | |
| * entry and therefore does not affect any walk-caches. | |
| * | |
| * | |
| * Next, we have some undocumented invalidation routines that you probably | |
| * don't want to call unless you know what you're doing: | |
| * | |
| * local_flush_tlb_all() | |
| * Same as flush_tlb_all(), but only applies to the calling CPU. | |
| * | |
| * __flush_tlb_kernel_pgtable(addr) | |
| * Invalidate a single kernel mapping for address 'addr' on all | |
| * CPUs, ensuring that any walk-cache entries associated with the | |
| * translation are also invalidated. | |
| * | |
| * __flush_tlb_range(vma, start, end, stride, last_level) | |
| * Invalidate the virtual-address range '[start, end)' on all | |
| * CPUs for the user address space corresponding to 'vma->mm'. | |
| * The invalidation operations are issued at a granularity | |
| * determined by 'stride' and only affect any walk-cache entries | |
| * if 'last_level' is equal to false. | |
| * | |
| * | |
| * Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented | |
| * on top of these routines, since that is our interface to the mmu_gather | |
| * API as used by munmap() and friends. | |
| */ | |
| static inline void local_flush_tlb_all(void) | |
| { | |
| dsb(nshst); | |
| __tlbi(vmalle1); | |
| dsb(nsh); | |
| isb(); | |
| } | |
| static inline void flush_tlb_all(void) | |
| { | |
| dsb(ishst); | |
| __tlbi(vmalle1is); | |
| dsb(ish); | |
| isb(); | |
| } | |
| static inline void flush_tlb_mm(struct mm_struct *mm) | |
| { | |
| unsigned long asid; | |
| dsb(ishst); | |
| asid = __TLBI_VADDR(0, ASID(mm)); | |
| __tlbi(aside1is, asid); | |
| __tlbi_user(aside1is, asid); | |
| dsb(ish); | |
| } | |
| static inline void flush_tlb_page_nosync(struct vm_area_struct *vma, | |
| unsigned long uaddr) | |
| { | |
| unsigned long addr; | |
| dsb(ishst); | |
| addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); | |
| __tlbi(vale1is, addr); | |
| __tlbi_user(vale1is, addr); | |
| } | |
| static inline void flush_tlb_page(struct vm_area_struct *vma, | |
| unsigned long uaddr) | |
| { | |
| flush_tlb_page_nosync(vma, uaddr); | |
| dsb(ish); | |
| } | |
| /* | |
| * This is meant to avoid soft lock-ups on large TLB flushing ranges and not | |
| * necessarily a performance improvement. | |
| */ | |
| #define MAX_TLBI_OPS PTRS_PER_PTE | |
| static inline void __flush_tlb_range(struct vm_area_struct *vma, | |
| unsigned long start, unsigned long end, | |
| unsigned long stride, bool last_level, | |
| int tlb_level) | |
| { | |
| int num = 0; | |
| int scale = 0; | |
| unsigned long asid, addr, pages; | |
| start = round_down(start, stride); | |
| end = round_up(end, stride); | |
| pages = (end - start) >> PAGE_SHIFT; | |
| /* | |
| * When not uses TLB range ops, we can handle up to | |
| * (MAX_TLBI_OPS - 1) pages; | |
| * When uses TLB range ops, we can handle up to | |
| * (MAX_TLBI_RANGE_PAGES - 1) pages. | |
| */ | |
| if ((!system_supports_tlb_range() && | |
| (end - start) >= (MAX_TLBI_OPS * stride)) || | |
| pages >= MAX_TLBI_RANGE_PAGES) { | |
| flush_tlb_mm(vma->vm_mm); | |
| return; | |
| } | |
| dsb(ishst); | |
| asid = ASID(vma->vm_mm); | |
| /* | |
| * When the CPU does not support TLB range operations, flush the TLB | |
| * entries one by one at the granularity of 'stride'. If the the TLB | |
| * range ops are supported, then: | |
| * | |
| * 1. If 'pages' is odd, flush the first page through non-range | |
| * operations; | |
| * | |
| * 2. For remaining pages: the minimum range granularity is decided | |
| * by 'scale', so multiple range TLBI operations may be required. | |
| * Start from scale = 0, flush the corresponding number of pages | |
| * ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it | |
| * until no pages left. | |
| * | |
| * Note that certain ranges can be represented by either num = 31 and | |
| * scale or num = 0 and scale + 1. The loop below favours the latter | |
| * since num is limited to 30 by the __TLBI_RANGE_NUM() macro. | |
| */ | |
| while (pages > 0) { | |
| if (!system_supports_tlb_range() || | |
| pages % 2 == 1) { | |
| addr = __TLBI_VADDR(start, asid); | |
| if (last_level) { | |
| __tlbi_level(vale1is, addr, tlb_level); | |
| __tlbi_user_level(vale1is, addr, tlb_level); | |
| } else { | |
| __tlbi_level(vae1is, addr, tlb_level); | |
| __tlbi_user_level(vae1is, addr, tlb_level); | |
| } | |
| start += stride; | |
| pages -= stride >> PAGE_SHIFT; | |
| continue; | |
| } | |
| num = __TLBI_RANGE_NUM(pages, scale); | |
| if (num >= 0) { | |
| addr = __TLBI_VADDR_RANGE(start, asid, scale, | |
| num, tlb_level); | |
| if (last_level) { | |
| __tlbi(rvale1is, addr); | |
| __tlbi_user(rvale1is, addr); | |
| } else { | |
| __tlbi(rvae1is, addr); | |
| __tlbi_user(rvae1is, addr); | |
| } | |
| start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; | |
| pages -= __TLBI_RANGE_PAGES(num, scale); | |
| } | |
| scale++; | |
| } | |
| dsb(ish); | |
| } | |
| static inline void flush_tlb_range(struct vm_area_struct *vma, | |
| unsigned long start, unsigned long end) | |
| { | |
| /* | |
| * We cannot use leaf-only invalidation here, since we may be invalidating | |
| * table entries as part of collapsing hugepages or moving page tables. | |
| * Set the tlb_level to 0 because we can not get enough information here. | |
| */ | |
| __flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0); | |
| } | |
| static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) | |
| { | |
| unsigned long addr; | |
| if ((end - start) > (MAX_TLBI_OPS * PAGE_SIZE)) { | |
| flush_tlb_all(); | |
| return; | |
| } | |
| start = __TLBI_VADDR(start, 0); | |
| end = __TLBI_VADDR(end, 0); | |
| dsb(ishst); | |
| for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) | |
| __tlbi(vaale1is, addr); | |
| dsb(ish); | |
| isb(); | |
| } | |
| /* | |
| * Used to invalidate the TLB (walk caches) corresponding to intermediate page | |
| * table levels (pgd/pud/pmd). | |
| */ | |
| static inline void __flush_tlb_kernel_pgtable(unsigned long kaddr) | |
| { | |
| unsigned long addr = __TLBI_VADDR(kaddr, 0); | |
| dsb(ishst); | |
| __tlbi(vaae1is, addr); | |
| dsb(ish); | |
| isb(); | |
| } | |
| #endif | |
| #endif |