| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2020 ARM Ltd. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/cpu.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/prctl.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/string.h> | |
| #include <linux/swap.h> | |
| #include <linux/swapops.h> | |
| #include <linux/thread_info.h> | |
| #include <linux/types.h> | |
| #include <linux/uio.h> | |
| #include <asm/barrier.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/mte.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/sysreg.h> | |
| static DEFINE_PER_CPU_READ_MOSTLY(u64, mte_tcf_preferred); | |
| #ifdef CONFIG_KASAN_HW_TAGS | |
| /* | |
| * The asynchronous and asymmetric MTE modes have the same behavior for | |
| * store operations. This flag is set when either of these modes is enabled. | |
| */ | |
| DEFINE_STATIC_KEY_FALSE(mte_async_or_asymm_mode); | |
| EXPORT_SYMBOL_GPL(mte_async_or_asymm_mode); | |
| #endif | |
| static void mte_sync_page_tags(struct page *page, pte_t old_pte, | |
| bool check_swap, bool pte_is_tagged) | |
| { | |
| if (check_swap && is_swap_pte(old_pte)) { | |
| swp_entry_t entry = pte_to_swp_entry(old_pte); | |
| if (!non_swap_entry(entry) && mte_restore_tags(entry, page)) | |
| return; | |
| } | |
| if (!pte_is_tagged) | |
| return; | |
| page_kasan_tag_reset(page); | |
| /* | |
| * We need smp_wmb() in between setting the flags and clearing the | |
| * tags because if another thread reads page->flags and builds a | |
| * tagged address out of it, there is an actual dependency to the | |
| * memory access, but on the current thread we do not guarantee that | |
| * the new page->flags are visible before the tags were updated. | |
| */ | |
| smp_wmb(); | |
| mte_clear_page_tags(page_address(page)); | |
| } | |
| void mte_sync_tags(pte_t old_pte, pte_t pte) | |
| { | |
| struct page *page = pte_page(pte); | |
| long i, nr_pages = compound_nr(page); | |
| bool check_swap = nr_pages == 1; | |
| bool pte_is_tagged = pte_tagged(pte); | |
| /* Early out if there's nothing to do */ | |
| if (!check_swap && !pte_is_tagged) | |
| return; | |
| /* if PG_mte_tagged is set, tags have already been initialised */ | |
| for (i = 0; i < nr_pages; i++, page++) { | |
| if (!test_and_set_bit(PG_mte_tagged, &page->flags)) | |
| mte_sync_page_tags(page, old_pte, check_swap, | |
| pte_is_tagged); | |
| } | |
| } | |
| int memcmp_pages(struct page *page1, struct page *page2) | |
| { | |
| char *addr1, *addr2; | |
| int ret; | |
| addr1 = page_address(page1); | |
| addr2 = page_address(page2); | |
| ret = memcmp(addr1, addr2, PAGE_SIZE); | |
| if (!system_supports_mte() || ret) | |
| return ret; | |
| /* | |
| * If the page content is identical but at least one of the pages is | |
| * tagged, return non-zero to avoid KSM merging. If only one of the | |
| * pages is tagged, set_pte_at() may zero or change the tags of the | |
| * other page via mte_sync_tags(). | |
| */ | |
| if (test_bit(PG_mte_tagged, &page1->flags) || | |
| test_bit(PG_mte_tagged, &page2->flags)) | |
| return addr1 != addr2; | |
| return ret; | |
| } | |
| static inline void __mte_enable_kernel(const char *mode, unsigned long tcf) | |
| { | |
| /* Enable MTE Sync Mode for EL1. */ | |
| sysreg_clear_set(sctlr_el1, SCTLR_ELx_TCF_MASK, tcf); | |
| isb(); | |
| pr_info_once("MTE: enabled in %s mode at EL1\n", mode); | |
| } | |
| #ifdef CONFIG_KASAN_HW_TAGS | |
| void mte_enable_kernel_sync(void) | |
| { | |
| /* | |
| * Make sure we enter this function when no PE has set | |
| * async mode previously. | |
| */ | |
| WARN_ONCE(system_uses_mte_async_or_asymm_mode(), | |
| "MTE async mode enabled system wide!"); | |
| __mte_enable_kernel("synchronous", SCTLR_ELx_TCF_SYNC); | |
| } | |
| void mte_enable_kernel_async(void) | |
| { | |
| __mte_enable_kernel("asynchronous", SCTLR_ELx_TCF_ASYNC); | |
| /* | |
| * MTE async mode is set system wide by the first PE that | |
| * executes this function. | |
| * | |
| * Note: If in future KASAN acquires a runtime switching | |
| * mode in between sync and async, this strategy needs | |
| * to be reviewed. | |
| */ | |
| if (!system_uses_mte_async_or_asymm_mode()) | |
| static_branch_enable(&mte_async_or_asymm_mode); | |
| } | |
| void mte_enable_kernel_asymm(void) | |
| { | |
| if (cpus_have_cap(ARM64_MTE_ASYMM)) { | |
| __mte_enable_kernel("asymmetric", SCTLR_ELx_TCF_ASYMM); | |
| /* | |
| * MTE asymm mode behaves as async mode for store | |
| * operations. The mode is set system wide by the | |
| * first PE that executes this function. | |
| * | |
| * Note: If in future KASAN acquires a runtime switching | |
| * mode in between sync and async, this strategy needs | |
| * to be reviewed. | |
| */ | |
| if (!system_uses_mte_async_or_asymm_mode()) | |
| static_branch_enable(&mte_async_or_asymm_mode); | |
| } else { | |
| /* | |
| * If the CPU does not support MTE asymmetric mode the | |
| * kernel falls back on synchronous mode which is the | |
| * default for kasan=on. | |
| */ | |
| mte_enable_kernel_sync(); | |
| } | |
| } | |
| #endif | |
| #ifdef CONFIG_KASAN_HW_TAGS | |
| void mte_check_tfsr_el1(void) | |
| { | |
| u64 tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1); | |
| if (unlikely(tfsr_el1 & SYS_TFSR_EL1_TF1)) { | |
| /* | |
| * Note: isb() is not required after this direct write | |
| * because there is no indirect read subsequent to it | |
| * (per ARM DDI 0487F.c table D13-1). | |
| */ | |
| write_sysreg_s(0, SYS_TFSR_EL1); | |
| kasan_report_async(); | |
| } | |
| } | |
| #endif | |
| /* | |
| * This is where we actually resolve the system and process MTE mode | |
| * configuration into an actual value in SCTLR_EL1 that affects | |
| * userspace. | |
| */ | |
| static void mte_update_sctlr_user(struct task_struct *task) | |
| { | |
| /* | |
| * This must be called with preemption disabled and can only be called | |
| * on the current or next task since the CPU must match where the thread | |
| * is going to run. The caller is responsible for calling | |
| * update_sctlr_el1() later in the same preemption disabled block. | |
| */ | |
| unsigned long sctlr = task->thread.sctlr_user; | |
| unsigned long mte_ctrl = task->thread.mte_ctrl; | |
| unsigned long pref, resolved_mte_tcf; | |
| pref = __this_cpu_read(mte_tcf_preferred); | |
| /* | |
| * If there is no overlap between the system preferred and | |
| * program requested values go with what was requested. | |
| */ | |
| resolved_mte_tcf = (mte_ctrl & pref) ? pref : mte_ctrl; | |
| sctlr &= ~SCTLR_EL1_TCF0_MASK; | |
| /* | |
| * Pick an actual setting. The order in which we check for | |
| * set bits and map into register values determines our | |
| * default order. | |
| */ | |
| if (resolved_mte_tcf & MTE_CTRL_TCF_ASYMM) | |
| sctlr |= SCTLR_EL1_TCF0_ASYMM; | |
| else if (resolved_mte_tcf & MTE_CTRL_TCF_ASYNC) | |
| sctlr |= SCTLR_EL1_TCF0_ASYNC; | |
| else if (resolved_mte_tcf & MTE_CTRL_TCF_SYNC) | |
| sctlr |= SCTLR_EL1_TCF0_SYNC; | |
| task->thread.sctlr_user = sctlr; | |
| } | |
| static void mte_update_gcr_excl(struct task_struct *task) | |
| { | |
| /* | |
| * SYS_GCR_EL1 will be set to current->thread.mte_ctrl value by | |
| * mte_set_user_gcr() in kernel_exit, but only if KASAN is enabled. | |
| */ | |
| if (kasan_hw_tags_enabled()) | |
| return; | |
| write_sysreg_s( | |
| ((task->thread.mte_ctrl >> MTE_CTRL_GCR_USER_EXCL_SHIFT) & | |
| SYS_GCR_EL1_EXCL_MASK) | SYS_GCR_EL1_RRND, | |
| SYS_GCR_EL1); | |
| } | |
| void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr, | |
| __le32 *updptr, int nr_inst) | |
| { | |
| BUG_ON(nr_inst != 1); /* Branch -> NOP */ | |
| if (kasan_hw_tags_enabled()) | |
| *updptr = cpu_to_le32(aarch64_insn_gen_nop()); | |
| } | |
| void mte_thread_init_user(void) | |
| { | |
| if (!system_supports_mte()) | |
| return; | |
| /* clear any pending asynchronous tag fault */ | |
| dsb(ish); | |
| write_sysreg_s(0, SYS_TFSRE0_EL1); | |
| clear_thread_flag(TIF_MTE_ASYNC_FAULT); | |
| /* disable tag checking and reset tag generation mask */ | |
| set_mte_ctrl(current, 0); | |
| } | |
| void mte_thread_switch(struct task_struct *next) | |
| { | |
| if (!system_supports_mte()) | |
| return; | |
| mte_update_sctlr_user(next); | |
| mte_update_gcr_excl(next); | |
| /* | |
| * Check if an async tag exception occurred at EL1. | |
| * | |
| * Note: On the context switch path we rely on the dsb() present | |
| * in __switch_to() to guarantee that the indirect writes to TFSR_EL1 | |
| * are synchronized before this point. | |
| */ | |
| isb(); | |
| mte_check_tfsr_el1(); | |
| } | |
| void mte_suspend_enter(void) | |
| { | |
| if (!system_supports_mte()) | |
| return; | |
| /* | |
| * The barriers are required to guarantee that the indirect writes | |
| * to TFSR_EL1 are synchronized before we report the state. | |
| */ | |
| dsb(nsh); | |
| isb(); | |
| /* Report SYS_TFSR_EL1 before suspend entry */ | |
| mte_check_tfsr_el1(); | |
| } | |
| long set_mte_ctrl(struct task_struct *task, unsigned long arg) | |
| { | |
| u64 mte_ctrl = (~((arg & PR_MTE_TAG_MASK) >> PR_MTE_TAG_SHIFT) & | |
| SYS_GCR_EL1_EXCL_MASK) << MTE_CTRL_GCR_USER_EXCL_SHIFT; | |
| if (!system_supports_mte()) | |
| return 0; | |
| if (arg & PR_MTE_TCF_ASYNC) | |
| mte_ctrl |= MTE_CTRL_TCF_ASYNC; | |
| if (arg & PR_MTE_TCF_SYNC) | |
| mte_ctrl |= MTE_CTRL_TCF_SYNC; | |
| if (arg & PR_MTE_TCF_ASYMM) | |
| mte_ctrl |= MTE_CTRL_TCF_ASYMM; | |
| task->thread.mte_ctrl = mte_ctrl; | |
| if (task == current) { | |
| preempt_disable(); | |
| mte_update_sctlr_user(task); | |
| mte_update_gcr_excl(task); | |
| update_sctlr_el1(task->thread.sctlr_user); | |
| preempt_enable(); | |
| } | |
| return 0; | |
| } | |
| long get_mte_ctrl(struct task_struct *task) | |
| { | |
| unsigned long ret; | |
| u64 mte_ctrl = task->thread.mte_ctrl; | |
| u64 incl = (~mte_ctrl >> MTE_CTRL_GCR_USER_EXCL_SHIFT) & | |
| SYS_GCR_EL1_EXCL_MASK; | |
| if (!system_supports_mte()) | |
| return 0; | |
| ret = incl << PR_MTE_TAG_SHIFT; | |
| if (mte_ctrl & MTE_CTRL_TCF_ASYNC) | |
| ret |= PR_MTE_TCF_ASYNC; | |
| if (mte_ctrl & MTE_CTRL_TCF_SYNC) | |
| ret |= PR_MTE_TCF_SYNC; | |
| if (mte_ctrl & MTE_CTRL_TCF_ASYMM) | |
| ret |= PR_MTE_TCF_ASYMM; | |
| return ret; | |
| } | |
| /* | |
| * Access MTE tags in another process' address space as given in mm. Update | |
| * the number of tags copied. Return 0 if any tags copied, error otherwise. | |
| * Inspired by __access_remote_vm(). | |
| */ | |
| static int __access_remote_tags(struct mm_struct *mm, unsigned long addr, | |
| struct iovec *kiov, unsigned int gup_flags) | |
| { | |
| struct vm_area_struct *vma; | |
| void __user *buf = kiov->iov_base; | |
| size_t len = kiov->iov_len; | |
| int ret; | |
| int write = gup_flags & FOLL_WRITE; | |
| if (!access_ok(buf, len)) | |
| return -EFAULT; | |
| if (mmap_read_lock_killable(mm)) | |
| return -EIO; | |
| while (len) { | |
| unsigned long tags, offset; | |
| void *maddr; | |
| struct page *page = NULL; | |
| ret = get_user_pages_remote(mm, addr, 1, gup_flags, &page, | |
| &vma, NULL); | |
| if (ret <= 0) | |
| break; | |
| /* | |
| * Only copy tags if the page has been mapped as PROT_MTE | |
| * (PG_mte_tagged set). Otherwise the tags are not valid and | |
| * not accessible to user. Moreover, an mprotect(PROT_MTE) | |
| * would cause the existing tags to be cleared if the page | |
| * was never mapped with PROT_MTE. | |
| */ | |
| if (!(vma->vm_flags & VM_MTE)) { | |
| ret = -EOPNOTSUPP; | |
| put_page(page); | |
| break; | |
| } | |
| WARN_ON_ONCE(!test_bit(PG_mte_tagged, &page->flags)); | |
| /* limit access to the end of the page */ | |
| offset = offset_in_page(addr); | |
| tags = min(len, (PAGE_SIZE - offset) / MTE_GRANULE_SIZE); | |
| maddr = page_address(page); | |
| if (write) { | |
| tags = mte_copy_tags_from_user(maddr + offset, buf, tags); | |
| set_page_dirty_lock(page); | |
| } else { | |
| tags = mte_copy_tags_to_user(buf, maddr + offset, tags); | |
| } | |
| put_page(page); | |
| /* error accessing the tracer's buffer */ | |
| if (!tags) | |
| break; | |
| len -= tags; | |
| buf += tags; | |
| addr += tags * MTE_GRANULE_SIZE; | |
| } | |
| mmap_read_unlock(mm); | |
| /* return an error if no tags copied */ | |
| kiov->iov_len = buf - kiov->iov_base; | |
| if (!kiov->iov_len) { | |
| /* check for error accessing the tracee's address space */ | |
| if (ret <= 0) | |
| return -EIO; | |
| else | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Copy MTE tags in another process' address space at 'addr' to/from tracer's | |
| * iovec buffer. Return 0 on success. Inspired by ptrace_access_vm(). | |
| */ | |
| static int access_remote_tags(struct task_struct *tsk, unsigned long addr, | |
| struct iovec *kiov, unsigned int gup_flags) | |
| { | |
| struct mm_struct *mm; | |
| int ret; | |
| mm = get_task_mm(tsk); | |
| if (!mm) | |
| return -EPERM; | |
| if (!tsk->ptrace || (current != tsk->parent) || | |
| ((get_dumpable(mm) != SUID_DUMP_USER) && | |
| !ptracer_capable(tsk, mm->user_ns))) { | |
| mmput(mm); | |
| return -EPERM; | |
| } | |
| ret = __access_remote_tags(mm, addr, kiov, gup_flags); | |
| mmput(mm); | |
| return ret; | |
| } | |
| int mte_ptrace_copy_tags(struct task_struct *child, long request, | |
| unsigned long addr, unsigned long data) | |
| { | |
| int ret; | |
| struct iovec kiov; | |
| struct iovec __user *uiov = (void __user *)data; | |
| unsigned int gup_flags = FOLL_FORCE; | |
| if (!system_supports_mte()) | |
| return -EIO; | |
| if (get_user(kiov.iov_base, &uiov->iov_base) || | |
| get_user(kiov.iov_len, &uiov->iov_len)) | |
| return -EFAULT; | |
| if (request == PTRACE_POKEMTETAGS) | |
| gup_flags |= FOLL_WRITE; | |
| /* align addr to the MTE tag granule */ | |
| addr &= MTE_GRANULE_MASK; | |
| ret = access_remote_tags(child, addr, &kiov, gup_flags); | |
| if (!ret) | |
| ret = put_user(kiov.iov_len, &uiov->iov_len); | |
| return ret; | |
| } | |
| static ssize_t mte_tcf_preferred_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| switch (per_cpu(mte_tcf_preferred, dev->id)) { | |
| case MTE_CTRL_TCF_ASYNC: | |
| return sysfs_emit(buf, "async\n"); | |
| case MTE_CTRL_TCF_SYNC: | |
| return sysfs_emit(buf, "sync\n"); | |
| case MTE_CTRL_TCF_ASYMM: | |
| return sysfs_emit(buf, "asymm\n"); | |
| default: | |
| return sysfs_emit(buf, "???\n"); | |
| } | |
| } | |
| static ssize_t mte_tcf_preferred_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| u64 tcf; | |
| if (sysfs_streq(buf, "async")) | |
| tcf = MTE_CTRL_TCF_ASYNC; | |
| else if (sysfs_streq(buf, "sync")) | |
| tcf = MTE_CTRL_TCF_SYNC; | |
| else if (cpus_have_cap(ARM64_MTE_ASYMM) && sysfs_streq(buf, "asymm")) | |
| tcf = MTE_CTRL_TCF_ASYMM; | |
| else | |
| return -EINVAL; | |
| device_lock(dev); | |
| per_cpu(mte_tcf_preferred, dev->id) = tcf; | |
| device_unlock(dev); | |
| return count; | |
| } | |
| static DEVICE_ATTR_RW(mte_tcf_preferred); | |
| static int register_mte_tcf_preferred_sysctl(void) | |
| { | |
| unsigned int cpu; | |
| if (!system_supports_mte()) | |
| return 0; | |
| for_each_possible_cpu(cpu) { | |
| per_cpu(mte_tcf_preferred, cpu) = MTE_CTRL_TCF_ASYNC; | |
| device_create_file(get_cpu_device(cpu), | |
| &dev_attr_mte_tcf_preferred); | |
| } | |
| return 0; | |
| } | |
| subsys_initcall(register_mte_tcf_preferred_sysctl); |