| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * processor_throttling.c - Throttling submodule of the ACPI processor driver | 
 |  * | 
 |  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
 |  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
 |  *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de> | 
 |  *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> | 
 |  *  			- Added processor hotplug support | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/init.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/cpufreq.h> | 
 | #include <linux/acpi.h> | 
 | #include <acpi/processor.h> | 
 | #include <asm/io.h> | 
 | #include <linux/uaccess.h> | 
 |  | 
 | #define PREFIX "ACPI: " | 
 |  | 
 | #define ACPI_PROCESSOR_CLASS            "processor" | 
 | #define _COMPONENT              ACPI_PROCESSOR_COMPONENT | 
 | ACPI_MODULE_NAME("processor_throttling"); | 
 |  | 
 | /* ignore_tpc: | 
 |  *  0 -> acpi processor driver doesn't ignore _TPC values | 
 |  *  1 -> acpi processor driver ignores _TPC values | 
 |  */ | 
 | static int ignore_tpc; | 
 | module_param(ignore_tpc, int, 0644); | 
 | MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support"); | 
 |  | 
 | struct throttling_tstate { | 
 | 	unsigned int cpu;		/* cpu nr */ | 
 | 	int target_state;		/* target T-state */ | 
 | }; | 
 |  | 
 | struct acpi_processor_throttling_arg { | 
 | 	struct acpi_processor *pr; | 
 | 	int target_state; | 
 | 	bool force; | 
 | }; | 
 |  | 
 | #define THROTTLING_PRECHANGE       (1) | 
 | #define THROTTLING_POSTCHANGE      (2) | 
 |  | 
 | static int acpi_processor_get_throttling(struct acpi_processor *pr); | 
 | static int __acpi_processor_set_throttling(struct acpi_processor *pr, | 
 | 					   int state, bool force, bool direct); | 
 |  | 
 | static int acpi_processor_update_tsd_coord(void) | 
 | { | 
 | 	int count, count_target; | 
 | 	int retval = 0; | 
 | 	unsigned int i, j; | 
 | 	cpumask_var_t covered_cpus; | 
 | 	struct acpi_processor *pr, *match_pr; | 
 | 	struct acpi_tsd_package *pdomain, *match_pdomain; | 
 | 	struct acpi_processor_throttling *pthrottling, *match_pthrottling; | 
 |  | 
 | 	if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * Now that we have _TSD data from all CPUs, lets setup T-state | 
 | 	 * coordination between all CPUs. | 
 | 	 */ | 
 | 	for_each_possible_cpu(i) { | 
 | 		pr = per_cpu(processors, i); | 
 | 		if (!pr) | 
 | 			continue; | 
 |  | 
 | 		/* Basic validity check for domain info */ | 
 | 		pthrottling = &(pr->throttling); | 
 |  | 
 | 		/* | 
 | 		 * If tsd package for one cpu is invalid, the coordination | 
 | 		 * among all CPUs is thought as invalid. | 
 | 		 * Maybe it is ugly. | 
 | 		 */ | 
 | 		if (!pthrottling->tsd_valid_flag) { | 
 | 			retval = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (retval) | 
 | 		goto err_ret; | 
 |  | 
 | 	for_each_possible_cpu(i) { | 
 | 		pr = per_cpu(processors, i); | 
 | 		if (!pr) | 
 | 			continue; | 
 |  | 
 | 		if (cpumask_test_cpu(i, covered_cpus)) | 
 | 			continue; | 
 | 		pthrottling = &pr->throttling; | 
 |  | 
 | 		pdomain = &(pthrottling->domain_info); | 
 | 		cpumask_set_cpu(i, pthrottling->shared_cpu_map); | 
 | 		cpumask_set_cpu(i, covered_cpus); | 
 | 		/* | 
 | 		 * If the number of processor in the TSD domain is 1, it is | 
 | 		 * unnecessary to parse the coordination for this CPU. | 
 | 		 */ | 
 | 		if (pdomain->num_processors <= 1) | 
 | 			continue; | 
 |  | 
 | 		/* Validate the Domain info */ | 
 | 		count_target = pdomain->num_processors; | 
 | 		count = 1; | 
 |  | 
 | 		for_each_possible_cpu(j) { | 
 | 			if (i == j) | 
 | 				continue; | 
 |  | 
 | 			match_pr = per_cpu(processors, j); | 
 | 			if (!match_pr) | 
 | 				continue; | 
 |  | 
 | 			match_pthrottling = &(match_pr->throttling); | 
 | 			match_pdomain = &(match_pthrottling->domain_info); | 
 | 			if (match_pdomain->domain != pdomain->domain) | 
 | 				continue; | 
 |  | 
 | 			/* Here i and j are in the same domain. | 
 | 			 * If two TSD packages have the same domain, they | 
 | 			 * should have the same num_porcessors and | 
 | 			 * coordination type. Otherwise it will be regarded | 
 | 			 * as illegal. | 
 | 			 */ | 
 | 			if (match_pdomain->num_processors != count_target) { | 
 | 				retval = -EINVAL; | 
 | 				goto err_ret; | 
 | 			} | 
 |  | 
 | 			if (pdomain->coord_type != match_pdomain->coord_type) { | 
 | 				retval = -EINVAL; | 
 | 				goto err_ret; | 
 | 			} | 
 |  | 
 | 			cpumask_set_cpu(j, covered_cpus); | 
 | 			cpumask_set_cpu(j, pthrottling->shared_cpu_map); | 
 | 			count++; | 
 | 		} | 
 | 		for_each_possible_cpu(j) { | 
 | 			if (i == j) | 
 | 				continue; | 
 |  | 
 | 			match_pr = per_cpu(processors, j); | 
 | 			if (!match_pr) | 
 | 				continue; | 
 |  | 
 | 			match_pthrottling = &(match_pr->throttling); | 
 | 			match_pdomain = &(match_pthrottling->domain_info); | 
 | 			if (match_pdomain->domain != pdomain->domain) | 
 | 				continue; | 
 |  | 
 | 			/* | 
 | 			 * If some CPUS have the same domain, they | 
 | 			 * will have the same shared_cpu_map. | 
 | 			 */ | 
 | 			cpumask_copy(match_pthrottling->shared_cpu_map, | 
 | 				     pthrottling->shared_cpu_map); | 
 | 		} | 
 | 	} | 
 |  | 
 | err_ret: | 
 | 	free_cpumask_var(covered_cpus); | 
 |  | 
 | 	for_each_possible_cpu(i) { | 
 | 		pr = per_cpu(processors, i); | 
 | 		if (!pr) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * Assume no coordination on any error parsing domain info. | 
 | 		 * The coordination type will be forced as SW_ALL. | 
 | 		 */ | 
 | 		if (retval) { | 
 | 			pthrottling = &(pr->throttling); | 
 | 			cpumask_clear(pthrottling->shared_cpu_map); | 
 | 			cpumask_set_cpu(i, pthrottling->shared_cpu_map); | 
 | 			pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* | 
 |  * Update the T-state coordination after the _TSD | 
 |  * data for all cpus is obtained. | 
 |  */ | 
 | void acpi_processor_throttling_init(void) | 
 | { | 
 | 	if (acpi_processor_update_tsd_coord()) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			"Assume no T-state coordination\n")); | 
 | 	} | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | static int acpi_processor_throttling_notifier(unsigned long event, void *data) | 
 | { | 
 | 	struct throttling_tstate *p_tstate = data; | 
 | 	struct acpi_processor *pr; | 
 | 	unsigned int cpu ; | 
 | 	int target_state; | 
 | 	struct acpi_processor_limit *p_limit; | 
 | 	struct acpi_processor_throttling *p_throttling; | 
 |  | 
 | 	cpu = p_tstate->cpu; | 
 | 	pr = per_cpu(processors, cpu); | 
 | 	if (!pr) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); | 
 | 		return 0; | 
 | 	} | 
 | 	if (!pr->flags.throttling) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is " | 
 | 				"unsupported on CPU %d\n", cpu)); | 
 | 		return 0; | 
 | 	} | 
 | 	target_state = p_tstate->target_state; | 
 | 	p_throttling = &(pr->throttling); | 
 | 	switch (event) { | 
 | 	case THROTTLING_PRECHANGE: | 
 | 		/* | 
 | 		 * Prechange event is used to choose one proper t-state, | 
 | 		 * which meets the limits of thermal, user and _TPC. | 
 | 		 */ | 
 | 		p_limit = &pr->limit; | 
 | 		if (p_limit->thermal.tx > target_state) | 
 | 			target_state = p_limit->thermal.tx; | 
 | 		if (p_limit->user.tx > target_state) | 
 | 			target_state = p_limit->user.tx; | 
 | 		if (pr->throttling_platform_limit > target_state) | 
 | 			target_state = pr->throttling_platform_limit; | 
 | 		if (target_state >= p_throttling->state_count) { | 
 | 			printk(KERN_WARNING | 
 | 				"Exceed the limit of T-state \n"); | 
 | 			target_state = p_throttling->state_count - 1; | 
 | 		} | 
 | 		p_tstate->target_state = target_state; | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:" | 
 | 				"target T-state of CPU %d is T%d\n", | 
 | 				cpu, target_state)); | 
 | 		break; | 
 | 	case THROTTLING_POSTCHANGE: | 
 | 		/* | 
 | 		 * Postchange event is only used to update the | 
 | 		 * T-state flag of acpi_processor_throttling. | 
 | 		 */ | 
 | 		p_throttling->state = target_state; | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:" | 
 | 				"CPU %d is switched to T%d\n", | 
 | 				cpu, target_state)); | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_WARNING | 
 | 			"Unsupported Throttling notifier event\n"); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * _TPC - Throttling Present Capabilities | 
 |  */ | 
 | static int acpi_processor_get_platform_limit(struct acpi_processor *pr) | 
 | { | 
 | 	acpi_status status = 0; | 
 | 	unsigned long long tpc = 0; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (ignore_tpc) | 
 | 		goto end; | 
 |  | 
 | 	status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		if (status != AE_NOT_FOUND) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC")); | 
 | 		} | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | end: | 
 | 	pr->throttling_platform_limit = (int)tpc; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int acpi_processor_tstate_has_changed(struct acpi_processor *pr) | 
 | { | 
 | 	int result = 0; | 
 | 	int throttling_limit; | 
 | 	int current_state; | 
 | 	struct acpi_processor_limit *limit; | 
 | 	int target_state; | 
 |  | 
 | 	if (ignore_tpc) | 
 | 		return 0; | 
 |  | 
 | 	result = acpi_processor_get_platform_limit(pr); | 
 | 	if (result) { | 
 | 		/* Throttling Limit is unsupported */ | 
 | 		return result; | 
 | 	} | 
 |  | 
 | 	throttling_limit = pr->throttling_platform_limit; | 
 | 	if (throttling_limit >= pr->throttling.state_count) { | 
 | 		/* Uncorrect Throttling Limit */ | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	current_state = pr->throttling.state; | 
 | 	if (current_state > throttling_limit) { | 
 | 		/* | 
 | 		 * The current state can meet the requirement of | 
 | 		 * _TPC limit. But it is reasonable that OSPM changes | 
 | 		 * t-states from high to low for better performance. | 
 | 		 * Of course the limit condition of thermal | 
 | 		 * and user should be considered. | 
 | 		 */ | 
 | 		limit = &pr->limit; | 
 | 		target_state = throttling_limit; | 
 | 		if (limit->thermal.tx > target_state) | 
 | 			target_state = limit->thermal.tx; | 
 | 		if (limit->user.tx > target_state) | 
 | 			target_state = limit->user.tx; | 
 | 	} else if (current_state == throttling_limit) { | 
 | 		/* | 
 | 		 * Unnecessary to change the throttling state | 
 | 		 */ | 
 | 		return 0; | 
 | 	} else { | 
 | 		/* | 
 | 		 * If the current state is lower than the limit of _TPC, it | 
 | 		 * will be forced to switch to the throttling state defined | 
 | 		 * by throttling_platfor_limit. | 
 | 		 * Because the previous state meets with the limit condition | 
 | 		 * of thermal and user, it is unnecessary to check it again. | 
 | 		 */ | 
 | 		target_state = throttling_limit; | 
 | 	} | 
 | 	return acpi_processor_set_throttling(pr, target_state, false); | 
 | } | 
 |  | 
 | /* | 
 |  * This function is used to reevaluate whether the T-state is valid | 
 |  * after one CPU is onlined/offlined. | 
 |  * It is noted that it won't reevaluate the following properties for | 
 |  * the T-state. | 
 |  *	1. Control method. | 
 |  *	2. the number of supported T-state | 
 |  *	3. TSD domain | 
 |  */ | 
 | void acpi_processor_reevaluate_tstate(struct acpi_processor *pr, | 
 | 					bool is_dead) | 
 | { | 
 | 	int result = 0; | 
 |  | 
 | 	if (is_dead) { | 
 | 		/* When one CPU is offline, the T-state throttling | 
 | 		 * will be invalidated. | 
 | 		 */ | 
 | 		pr->flags.throttling = 0; | 
 | 		return; | 
 | 	} | 
 | 	/* the following is to recheck whether the T-state is valid for | 
 | 	 * the online CPU | 
 | 	 */ | 
 | 	if (!pr->throttling.state_count) { | 
 | 		/* If the number of T-state is invalid, it is | 
 | 		 * invalidated. | 
 | 		 */ | 
 | 		pr->flags.throttling = 0; | 
 | 		return; | 
 | 	} | 
 | 	pr->flags.throttling = 1; | 
 |  | 
 | 	/* Disable throttling (if enabled).  We'll let subsequent | 
 | 	 * policy (e.g.thermal) decide to lower performance if it | 
 | 	 * so chooses, but for now we'll crank up the speed. | 
 | 	 */ | 
 |  | 
 | 	result = acpi_processor_get_throttling(pr); | 
 | 	if (result) | 
 | 		goto end; | 
 |  | 
 | 	if (pr->throttling.state) { | 
 | 		result = acpi_processor_set_throttling(pr, 0, false); | 
 | 		if (result) | 
 | 			goto end; | 
 | 	} | 
 |  | 
 | end: | 
 | 	if (result) | 
 | 		pr->flags.throttling = 0; | 
 | } | 
 | /* | 
 |  * _PTC - Processor Throttling Control (and status) register location | 
 |  */ | 
 | static int acpi_processor_get_throttling_control(struct acpi_processor *pr) | 
 | { | 
 | 	int result = 0; | 
 | 	acpi_status status = 0; | 
 | 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	union acpi_object *ptc = NULL; | 
 | 	union acpi_object obj = { 0 }; | 
 | 	struct acpi_processor_throttling *throttling; | 
 |  | 
 | 	status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		if (status != AE_NOT_FOUND) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC")); | 
 | 		} | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	ptc = (union acpi_object *)buffer.pointer; | 
 | 	if (!ptc || (ptc->type != ACPI_TYPE_PACKAGE) | 
 | 	    || (ptc->package.count != 2)) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _PTC data\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * control_register | 
 | 	 */ | 
 |  | 
 | 	obj = ptc->package.elements[0]; | 
 |  | 
 | 	if ((obj.type != ACPI_TYPE_BUFFER) | 
 | 	    || (obj.buffer.length < sizeof(struct acpi_ptc_register)) | 
 | 	    || (obj.buffer.pointer == NULL)) { | 
 | 		printk(KERN_ERR PREFIX | 
 | 		       "Invalid _PTC data (control_register)\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 | 	memcpy(&pr->throttling.control_register, obj.buffer.pointer, | 
 | 	       sizeof(struct acpi_ptc_register)); | 
 |  | 
 | 	/* | 
 | 	 * status_register | 
 | 	 */ | 
 |  | 
 | 	obj = ptc->package.elements[1]; | 
 |  | 
 | 	if ((obj.type != ACPI_TYPE_BUFFER) | 
 | 	    || (obj.buffer.length < sizeof(struct acpi_ptc_register)) | 
 | 	    || (obj.buffer.pointer == NULL)) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	memcpy(&pr->throttling.status_register, obj.buffer.pointer, | 
 | 	       sizeof(struct acpi_ptc_register)); | 
 |  | 
 | 	throttling = &pr->throttling; | 
 |  | 
 | 	if ((throttling->control_register.bit_width + | 
 | 		throttling->control_register.bit_offset) > 32) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	if ((throttling->status_register.bit_width + | 
 | 		throttling->status_register.bit_offset) > 32) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 |       end: | 
 | 	kfree(buffer.pointer); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * _TSS - Throttling Supported States | 
 |  */ | 
 | static int acpi_processor_get_throttling_states(struct acpi_processor *pr) | 
 | { | 
 | 	int result = 0; | 
 | 	acpi_status status = AE_OK; | 
 | 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; | 
 | 	struct acpi_buffer state = { 0, NULL }; | 
 | 	union acpi_object *tss = NULL; | 
 | 	int i; | 
 |  | 
 | 	status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		if (status != AE_NOT_FOUND) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS")); | 
 | 		} | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	tss = buffer.pointer; | 
 | 	if (!tss || (tss->type != ACPI_TYPE_PACKAGE)) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _TSS data\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", | 
 | 			  tss->package.count)); | 
 |  | 
 | 	pr->throttling.state_count = tss->package.count; | 
 | 	pr->throttling.states_tss = | 
 | 	    kmalloc_array(tss->package.count, | 
 | 			  sizeof(struct acpi_processor_tx_tss), | 
 | 			  GFP_KERNEL); | 
 | 	if (!pr->throttling.states_tss) { | 
 | 		result = -ENOMEM; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < pr->throttling.state_count; i++) { | 
 |  | 
 | 		struct acpi_processor_tx_tss *tx = | 
 | 		    (struct acpi_processor_tx_tss *)&(pr->throttling. | 
 | 						      states_tss[i]); | 
 |  | 
 | 		state.length = sizeof(struct acpi_processor_tx_tss); | 
 | 		state.pointer = tx; | 
 |  | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i)); | 
 |  | 
 | 		status = acpi_extract_package(&(tss->package.elements[i]), | 
 | 					      &format, &state); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, "Invalid _TSS data")); | 
 | 			result = -EFAULT; | 
 | 			kfree(pr->throttling.states_tss); | 
 | 			goto end; | 
 | 		} | 
 |  | 
 | 		if (!tx->freqpercentage) { | 
 | 			printk(KERN_ERR PREFIX | 
 | 			       "Invalid _TSS data: freq is zero\n"); | 
 | 			result = -EFAULT; | 
 | 			kfree(pr->throttling.states_tss); | 
 | 			goto end; | 
 | 		} | 
 | 	} | 
 |  | 
 |       end: | 
 | 	kfree(buffer.pointer); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * _TSD - T-State Dependencies | 
 |  */ | 
 | static int acpi_processor_get_tsd(struct acpi_processor *pr) | 
 | { | 
 | 	int result = 0; | 
 | 	acpi_status status = AE_OK; | 
 | 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; | 
 | 	struct acpi_buffer state = { 0, NULL }; | 
 | 	union acpi_object *tsd = NULL; | 
 | 	struct acpi_tsd_package *pdomain; | 
 | 	struct acpi_processor_throttling *pthrottling; | 
 |  | 
 | 	pthrottling = &pr->throttling; | 
 | 	pthrottling->tsd_valid_flag = 0; | 
 |  | 
 | 	status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		if (status != AE_NOT_FOUND) { | 
 | 			ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD")); | 
 | 		} | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	tsd = buffer.pointer; | 
 | 	if (!tsd || (tsd->type != ACPI_TYPE_PACKAGE)) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _TSD data\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	if (tsd->package.count != 1) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _TSD data\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	pdomain = &(pr->throttling.domain_info); | 
 |  | 
 | 	state.length = sizeof(struct acpi_tsd_package); | 
 | 	state.pointer = pdomain; | 
 |  | 
 | 	status = acpi_extract_package(&(tsd->package.elements[0]), | 
 | 				      &format, &state); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		printk(KERN_ERR PREFIX "Invalid _TSD data\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	if (pdomain->num_entries != ACPI_TSD_REV0_ENTRIES) { | 
 | 		printk(KERN_ERR PREFIX "Unknown _TSD:num_entries\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	if (pdomain->revision != ACPI_TSD_REV0_REVISION) { | 
 | 		printk(KERN_ERR PREFIX "Unknown _TSD:revision\n"); | 
 | 		result = -EFAULT; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	pthrottling = &pr->throttling; | 
 | 	pthrottling->tsd_valid_flag = 1; | 
 | 	pthrottling->shared_type = pdomain->coord_type; | 
 | 	cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map); | 
 | 	/* | 
 | 	 * If the coordination type is not defined in ACPI spec, | 
 | 	 * the tsd_valid_flag will be clear and coordination type | 
 | 	 * will be forecd as DOMAIN_COORD_TYPE_SW_ALL. | 
 | 	 */ | 
 | 	if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && | 
 | 		pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && | 
 | 		pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { | 
 | 		pthrottling->tsd_valid_flag = 0; | 
 | 		pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | 
 | 	} | 
 |  | 
 |       end: | 
 | 	kfree(buffer.pointer); | 
 | 	return result; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                               Throttling Control | 
 |    -------------------------------------------------------------------------- */ | 
 | static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) | 
 | { | 
 | 	int state = 0; | 
 | 	u32 value = 0; | 
 | 	u32 duty_mask = 0; | 
 | 	u32 duty_value = 0; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* | 
 | 	 * We don't care about error returns - we just try to mark | 
 | 	 * these reserved so that nobody else is confused into thinking | 
 | 	 * that this region might be unused.. | 
 | 	 * | 
 | 	 * (In particular, allocating the IO range for Cardbus) | 
 | 	 */ | 
 | 	request_region(pr->throttling.address, 6, "ACPI CPU throttle"); | 
 |  | 
 | 	pr->throttling.state = 0; | 
 |  | 
 | 	duty_mask = pr->throttling.state_count - 1; | 
 |  | 
 | 	duty_mask <<= pr->throttling.duty_offset; | 
 |  | 
 | 	local_irq_disable(); | 
 |  | 
 | 	value = inl(pr->throttling.address); | 
 |  | 
 | 	/* | 
 | 	 * Compute the current throttling state when throttling is enabled | 
 | 	 * (bit 4 is on). | 
 | 	 */ | 
 | 	if (value & 0x10) { | 
 | 		duty_value = value & duty_mask; | 
 | 		duty_value >>= pr->throttling.duty_offset; | 
 |  | 
 | 		if (duty_value) | 
 | 			state = pr->throttling.state_count - duty_value; | 
 | 	} | 
 |  | 
 | 	pr->throttling.state = state; | 
 |  | 
 | 	local_irq_enable(); | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "Throttling state is T%d (%d%% throttling applied)\n", | 
 | 			  state, pr->throttling.states[state].performance)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_X86 | 
 | static int acpi_throttling_rdmsr(u64 *value) | 
 | { | 
 | 	u64 msr_high, msr_low; | 
 | 	u64 msr = 0; | 
 | 	int ret = -1; | 
 |  | 
 | 	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) || | 
 | 		!this_cpu_has(X86_FEATURE_ACPI)) { | 
 | 		printk(KERN_ERR PREFIX | 
 | 			"HARDWARE addr space,NOT supported yet\n"); | 
 | 	} else { | 
 | 		msr_low = 0; | 
 | 		msr_high = 0; | 
 | 		rdmsr_safe(MSR_IA32_THERM_CONTROL, | 
 | 			(u32 *)&msr_low , (u32 *) &msr_high); | 
 | 		msr = (msr_high << 32) | msr_low; | 
 | 		*value = (u64) msr; | 
 | 		ret = 0; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int acpi_throttling_wrmsr(u64 value) | 
 | { | 
 | 	int ret = -1; | 
 | 	u64 msr; | 
 |  | 
 | 	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) || | 
 | 		!this_cpu_has(X86_FEATURE_ACPI)) { | 
 | 		printk(KERN_ERR PREFIX | 
 | 			"HARDWARE addr space,NOT supported yet\n"); | 
 | 	} else { | 
 | 		msr = value; | 
 | 		wrmsr_safe(MSR_IA32_THERM_CONTROL, | 
 | 			msr & 0xffffffff, msr >> 32); | 
 | 		ret = 0; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 | #else | 
 | static int acpi_throttling_rdmsr(u64 *value) | 
 | { | 
 | 	printk(KERN_ERR PREFIX | 
 | 		"HARDWARE addr space,NOT supported yet\n"); | 
 | 	return -1; | 
 | } | 
 |  | 
 | static int acpi_throttling_wrmsr(u64 value) | 
 | { | 
 | 	printk(KERN_ERR PREFIX | 
 | 		"HARDWARE addr space,NOT supported yet\n"); | 
 | 	return -1; | 
 | } | 
 | #endif | 
 |  | 
 | static int acpi_read_throttling_status(struct acpi_processor *pr, | 
 | 					u64 *value) | 
 | { | 
 | 	u32 bit_width, bit_offset; | 
 | 	u32 ptc_value; | 
 | 	u64 ptc_mask; | 
 | 	struct acpi_processor_throttling *throttling; | 
 | 	int ret = -1; | 
 |  | 
 | 	throttling = &pr->throttling; | 
 | 	switch (throttling->status_register.space_id) { | 
 | 	case ACPI_ADR_SPACE_SYSTEM_IO: | 
 | 		bit_width = throttling->status_register.bit_width; | 
 | 		bit_offset = throttling->status_register.bit_offset; | 
 |  | 
 | 		acpi_os_read_port((acpi_io_address) throttling->status_register. | 
 | 				  address, &ptc_value, | 
 | 				  (u32) (bit_width + bit_offset)); | 
 | 		ptc_mask = (1 << bit_width) - 1; | 
 | 		*value = (u64) ((ptc_value >> bit_offset) & ptc_mask); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	case ACPI_ADR_SPACE_FIXED_HARDWARE: | 
 | 		ret = acpi_throttling_rdmsr(value); | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_ERR PREFIX "Unknown addr space %d\n", | 
 | 		       (u32) (throttling->status_register.space_id)); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int acpi_write_throttling_state(struct acpi_processor *pr, | 
 | 				u64 value) | 
 | { | 
 | 	u32 bit_width, bit_offset; | 
 | 	u64 ptc_value; | 
 | 	u64 ptc_mask; | 
 | 	struct acpi_processor_throttling *throttling; | 
 | 	int ret = -1; | 
 |  | 
 | 	throttling = &pr->throttling; | 
 | 	switch (throttling->control_register.space_id) { | 
 | 	case ACPI_ADR_SPACE_SYSTEM_IO: | 
 | 		bit_width = throttling->control_register.bit_width; | 
 | 		bit_offset = throttling->control_register.bit_offset; | 
 | 		ptc_mask = (1 << bit_width) - 1; | 
 | 		ptc_value = value & ptc_mask; | 
 |  | 
 | 		acpi_os_write_port((acpi_io_address) throttling-> | 
 | 					control_register.address, | 
 | 					(u32) (ptc_value << bit_offset), | 
 | 					(u32) (bit_width + bit_offset)); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	case ACPI_ADR_SPACE_FIXED_HARDWARE: | 
 | 		ret = acpi_throttling_wrmsr(value); | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_ERR PREFIX "Unknown addr space %d\n", | 
 | 		       (u32) (throttling->control_register.space_id)); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int acpi_get_throttling_state(struct acpi_processor *pr, | 
 | 				u64 value) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < pr->throttling.state_count; i++) { | 
 | 		struct acpi_processor_tx_tss *tx = | 
 | 		    (struct acpi_processor_tx_tss *)&(pr->throttling. | 
 | 						      states_tss[i]); | 
 | 		if (tx->control == value) | 
 | 			return i; | 
 | 	} | 
 | 	return -1; | 
 | } | 
 |  | 
 | static int acpi_get_throttling_value(struct acpi_processor *pr, | 
 | 			int state, u64 *value) | 
 | { | 
 | 	int ret = -1; | 
 |  | 
 | 	if (state >= 0 && state <= pr->throttling.state_count) { | 
 | 		struct acpi_processor_tx_tss *tx = | 
 | 		    (struct acpi_processor_tx_tss *)&(pr->throttling. | 
 | 						      states_tss[state]); | 
 | 		*value = tx->control; | 
 | 		ret = 0; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) | 
 | { | 
 | 	int state = 0; | 
 | 	int ret; | 
 | 	u64 value; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	pr->throttling.state = 0; | 
 |  | 
 | 	value = 0; | 
 | 	ret = acpi_read_throttling_status(pr, &value); | 
 | 	if (ret >= 0) { | 
 | 		state = acpi_get_throttling_state(pr, value); | 
 | 		if (state == -1) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 				"Invalid throttling state, reset\n")); | 
 | 			state = 0; | 
 | 			ret = __acpi_processor_set_throttling(pr, state, true, | 
 | 							      true); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 		} | 
 | 		pr->throttling.state = state; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static long __acpi_processor_get_throttling(void *data) | 
 | { | 
 | 	struct acpi_processor *pr = data; | 
 |  | 
 | 	return pr->throttling.acpi_processor_get_throttling(pr); | 
 | } | 
 |  | 
 | static int acpi_processor_get_throttling(struct acpi_processor *pr) | 
 | { | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* | 
 | 	 * This is either called from the CPU hotplug callback of | 
 | 	 * processor_driver or via the ACPI probe function. In the latter | 
 | 	 * case the CPU is not guaranteed to be online. Both call sites are | 
 | 	 * protected against CPU hotplug. | 
 | 	 */ | 
 | 	if (!cpu_online(pr->id)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return call_on_cpu(pr->id, __acpi_processor_get_throttling, pr, false); | 
 | } | 
 |  | 
 | static int acpi_processor_get_fadt_info(struct acpi_processor *pr) | 
 | { | 
 | 	int i, step; | 
 |  | 
 | 	if (!pr->throttling.address) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); | 
 | 		return -EINVAL; | 
 | 	} else if (!pr->throttling.duty_width) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* TBD: Support duty_cycle values that span bit 4. */ | 
 | 	else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { | 
 | 		printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; | 
 |  | 
 | 	/* | 
 | 	 * Compute state values. Note that throttling displays a linear power | 
 | 	 * performance relationship (at 50% performance the CPU will consume | 
 | 	 * 50% power).  Values are in 1/10th of a percent to preserve accuracy. | 
 | 	 */ | 
 |  | 
 | 	step = (1000 / pr->throttling.state_count); | 
 |  | 
 | 	for (i = 0; i < pr->throttling.state_count; i++) { | 
 | 		pr->throttling.states[i].performance = 1000 - step * i; | 
 | 		pr->throttling.states[i].power = 1000 - step * i; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, | 
 | 					      int state, bool force) | 
 | { | 
 | 	u32 value = 0; | 
 | 	u32 duty_mask = 0; | 
 | 	u32 duty_value = 0; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((state < 0) || (state > (pr->throttling.state_count - 1))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!force && (state == pr->throttling.state)) | 
 | 		return 0; | 
 |  | 
 | 	if (state < pr->throttling_platform_limit) | 
 | 		return -EPERM; | 
 | 	/* | 
 | 	 * Calculate the duty_value and duty_mask. | 
 | 	 */ | 
 | 	if (state) { | 
 | 		duty_value = pr->throttling.state_count - state; | 
 |  | 
 | 		duty_value <<= pr->throttling.duty_offset; | 
 |  | 
 | 		/* Used to clear all duty_value bits */ | 
 | 		duty_mask = pr->throttling.state_count - 1; | 
 |  | 
 | 		duty_mask <<= acpi_gbl_FADT.duty_offset; | 
 | 		duty_mask = ~duty_mask; | 
 | 	} | 
 |  | 
 | 	local_irq_disable(); | 
 |  | 
 | 	/* | 
 | 	 * Disable throttling by writing a 0 to bit 4.  Note that we must | 
 | 	 * turn it off before you can change the duty_value. | 
 | 	 */ | 
 | 	value = inl(pr->throttling.address); | 
 | 	if (value & 0x10) { | 
 | 		value &= 0xFFFFFFEF; | 
 | 		outl(value, pr->throttling.address); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Write the new duty_value and then enable throttling.  Note | 
 | 	 * that a state value of 0 leaves throttling disabled. | 
 | 	 */ | 
 | 	if (state) { | 
 | 		value &= duty_mask; | 
 | 		value |= duty_value; | 
 | 		outl(value, pr->throttling.address); | 
 |  | 
 | 		value |= 0x00000010; | 
 | 		outl(value, pr->throttling.address); | 
 | 	} | 
 |  | 
 | 	pr->throttling.state = state; | 
 |  | 
 | 	local_irq_enable(); | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "Throttling state set to T%d (%d%%)\n", state, | 
 | 			  (pr->throttling.states[state].performance ? pr-> | 
 | 			   throttling.states[state].performance / 10 : 0))); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, | 
 | 					     int state, bool force) | 
 | { | 
 | 	int ret; | 
 | 	u64 value; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((state < 0) || (state > (pr->throttling.state_count - 1))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!force && (state == pr->throttling.state)) | 
 | 		return 0; | 
 |  | 
 | 	if (state < pr->throttling_platform_limit) | 
 | 		return -EPERM; | 
 |  | 
 | 	value = 0; | 
 | 	ret = acpi_get_throttling_value(pr, state, &value); | 
 | 	if (ret >= 0) { | 
 | 		acpi_write_throttling_state(pr, value); | 
 | 		pr->throttling.state = state; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static long acpi_processor_throttling_fn(void *data) | 
 | { | 
 | 	struct acpi_processor_throttling_arg *arg = data; | 
 | 	struct acpi_processor *pr = arg->pr; | 
 |  | 
 | 	return pr->throttling.acpi_processor_set_throttling(pr, | 
 | 			arg->target_state, arg->force); | 
 | } | 
 |  | 
 | static int __acpi_processor_set_throttling(struct acpi_processor *pr, | 
 | 					   int state, bool force, bool direct) | 
 | { | 
 | 	int ret = 0; | 
 | 	unsigned int i; | 
 | 	struct acpi_processor *match_pr; | 
 | 	struct acpi_processor_throttling *p_throttling; | 
 | 	struct acpi_processor_throttling_arg arg; | 
 | 	struct throttling_tstate t_state; | 
 |  | 
 | 	if (!pr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pr->flags.throttling) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if ((state < 0) || (state > (pr->throttling.state_count - 1))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (cpu_is_offline(pr->id)) { | 
 | 		/* | 
 | 		 * the cpu pointed by pr->id is offline. Unnecessary to change | 
 | 		 * the throttling state any more. | 
 | 		 */ | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	t_state.target_state = state; | 
 | 	p_throttling = &(pr->throttling); | 
 |  | 
 | 	/* | 
 | 	 * The throttling notifier will be called for every | 
 | 	 * affected cpu in order to get one proper T-state. | 
 | 	 * The notifier event is THROTTLING_PRECHANGE. | 
 | 	 */ | 
 | 	for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { | 
 | 		t_state.cpu = i; | 
 | 		acpi_processor_throttling_notifier(THROTTLING_PRECHANGE, | 
 | 							&t_state); | 
 | 	} | 
 | 	/* | 
 | 	 * The function of acpi_processor_set_throttling will be called | 
 | 	 * to switch T-state. If the coordination type is SW_ALL or HW_ALL, | 
 | 	 * it is necessary to call it for every affected cpu. Otherwise | 
 | 	 * it can be called only for the cpu pointed by pr. | 
 | 	 */ | 
 | 	if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { | 
 | 		arg.pr = pr; | 
 | 		arg.target_state = state; | 
 | 		arg.force = force; | 
 | 		ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, &arg, | 
 | 				  direct); | 
 | 	} else { | 
 | 		/* | 
 | 		 * When the T-state coordination is SW_ALL or HW_ALL, | 
 | 		 * it is necessary to set T-state for every affected | 
 | 		 * cpus. | 
 | 		 */ | 
 | 		for_each_cpu_and(i, cpu_online_mask, | 
 | 		    p_throttling->shared_cpu_map) { | 
 | 			match_pr = per_cpu(processors, i); | 
 | 			/* | 
 | 			 * If the pointer is invalid, we will report the | 
 | 			 * error message and continue. | 
 | 			 */ | 
 | 			if (!match_pr) { | 
 | 				ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 					"Invalid Pointer for CPU %d\n", i)); | 
 | 				continue; | 
 | 			} | 
 | 			/* | 
 | 			 * If the throttling control is unsupported on CPU i, | 
 | 			 * we will report the error message and continue. | 
 | 			 */ | 
 | 			if (!match_pr->flags.throttling) { | 
 | 				ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 					"Throttling Control is unsupported " | 
 | 					"on CPU %d\n", i)); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			arg.pr = match_pr; | 
 | 			arg.target_state = state; | 
 | 			arg.force = force; | 
 | 			ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, | 
 | 					  &arg, direct); | 
 | 		} | 
 | 	} | 
 | 	/* | 
 | 	 * After the set_throttling is called, the | 
 | 	 * throttling notifier is called for every | 
 | 	 * affected cpu to update the T-states. | 
 | 	 * The notifier event is THROTTLING_POSTCHANGE | 
 | 	 */ | 
 | 	for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { | 
 | 		t_state.cpu = i; | 
 | 		acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE, | 
 | 							&t_state); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int acpi_processor_set_throttling(struct acpi_processor *pr, int state, | 
 | 				  bool force) | 
 | { | 
 | 	return __acpi_processor_set_throttling(pr, state, force, false); | 
 | } | 
 |  | 
 | int acpi_processor_get_throttling_info(struct acpi_processor *pr) | 
 | { | 
 | 	int result = 0; | 
 | 	struct acpi_processor_throttling *pthrottling; | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", | 
 | 			  pr->throttling.address, | 
 | 			  pr->throttling.duty_offset, | 
 | 			  pr->throttling.duty_width)); | 
 |  | 
 | 	/* | 
 | 	 * Evaluate _PTC, _TSS and _TPC | 
 | 	 * They must all be present or none of them can be used. | 
 | 	 */ | 
 | 	if (acpi_processor_get_throttling_control(pr) || | 
 | 		acpi_processor_get_throttling_states(pr) || | 
 | 		acpi_processor_get_platform_limit(pr)) | 
 | 	{ | 
 | 		pr->throttling.acpi_processor_get_throttling = | 
 | 		    &acpi_processor_get_throttling_fadt; | 
 | 		pr->throttling.acpi_processor_set_throttling = | 
 | 		    &acpi_processor_set_throttling_fadt; | 
 | 		if (acpi_processor_get_fadt_info(pr)) | 
 | 			return 0; | 
 | 	} else { | 
 | 		pr->throttling.acpi_processor_get_throttling = | 
 | 		    &acpi_processor_get_throttling_ptc; | 
 | 		pr->throttling.acpi_processor_set_throttling = | 
 | 		    &acpi_processor_set_throttling_ptc; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If TSD package for one CPU can't be parsed successfully, it means | 
 | 	 * that this CPU will have no coordination with other CPUs. | 
 | 	 */ | 
 | 	if (acpi_processor_get_tsd(pr)) { | 
 | 		pthrottling = &pr->throttling; | 
 | 		pthrottling->tsd_valid_flag = 0; | 
 | 		cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map); | 
 | 		pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * PIIX4 Errata: We don't support throttling on the original PIIX4. | 
 | 	 * This shouldn't be an issue as few (if any) mobile systems ever | 
 | 	 * used this part. | 
 | 	 */ | 
 | 	if (errata.piix4.throttle) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 				  "Throttling not supported on PIIX4 A- or B-step\n")); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", | 
 | 			  pr->throttling.state_count)); | 
 |  | 
 | 	pr->flags.throttling = 1; | 
 |  | 
 | 	/* | 
 | 	 * Disable throttling (if enabled).  We'll let subsequent policy (e.g. | 
 | 	 * thermal) decide to lower performance if it so chooses, but for now | 
 | 	 * we'll crank up the speed. | 
 | 	 */ | 
 |  | 
 | 	result = acpi_processor_get_throttling(pr); | 
 | 	if (result) | 
 | 		goto end; | 
 |  | 
 | 	if (pr->throttling.state) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 				  "Disabling throttling (was T%d)\n", | 
 | 				  pr->throttling.state)); | 
 | 		result = acpi_processor_set_throttling(pr, 0, false); | 
 | 		if (result) | 
 | 			goto end; | 
 | 	} | 
 |  | 
 |       end: | 
 | 	if (result) | 
 | 		pr->flags.throttling = 0; | 
 |  | 
 | 	return result; | 
 | } | 
 |  |