| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * System Control and Power Interface (SCPI) Protocol based clock driver | 
 |  * | 
 |  * Copyright (C) 2015 ARM Ltd. | 
 |  */ | 
 |  | 
 | #include <linux/clk-provider.h> | 
 | #include <linux/device.h> | 
 | #include <linux/err.h> | 
 | #include <linux/of.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/scpi_protocol.h> | 
 |  | 
 | struct scpi_clk { | 
 | 	u32 id; | 
 | 	struct clk_hw hw; | 
 | 	struct scpi_dvfs_info *info; | 
 | 	struct scpi_ops *scpi_ops; | 
 | }; | 
 |  | 
 | #define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw) | 
 |  | 
 | static struct platform_device *cpufreq_dev; | 
 |  | 
 | static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw, | 
 | 					  unsigned long parent_rate) | 
 | { | 
 | 	struct scpi_clk *clk = to_scpi_clk(hw); | 
 |  | 
 | 	return clk->scpi_ops->clk_get_val(clk->id); | 
 | } | 
 |  | 
 | static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate, | 
 | 				unsigned long *parent_rate) | 
 | { | 
 | 	/* | 
 | 	 * We can't figure out what rate it will be, so just return the | 
 | 	 * rate back to the caller. scpi_clk_recalc_rate() will be called | 
 | 	 * after the rate is set and we'll know what rate the clock is | 
 | 	 * running at then. | 
 | 	 */ | 
 | 	return rate; | 
 | } | 
 |  | 
 | static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate, | 
 | 			     unsigned long parent_rate) | 
 | { | 
 | 	struct scpi_clk *clk = to_scpi_clk(hw); | 
 |  | 
 | 	return clk->scpi_ops->clk_set_val(clk->id, rate); | 
 | } | 
 |  | 
 | static const struct clk_ops scpi_clk_ops = { | 
 | 	.recalc_rate = scpi_clk_recalc_rate, | 
 | 	.round_rate = scpi_clk_round_rate, | 
 | 	.set_rate = scpi_clk_set_rate, | 
 | }; | 
 |  | 
 | /* find closest match to given frequency in OPP table */ | 
 | static long __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) | 
 | { | 
 | 	int idx; | 
 | 	unsigned long fmin = 0, fmax = ~0, ftmp; | 
 | 	const struct scpi_opp *opp = clk->info->opps; | 
 |  | 
 | 	for (idx = 0; idx < clk->info->count; idx++, opp++) { | 
 | 		ftmp = opp->freq; | 
 | 		if (ftmp >= rate) { | 
 | 			if (ftmp <= fmax) | 
 | 				fmax = ftmp; | 
 | 			break; | 
 | 		} else if (ftmp >= fmin) { | 
 | 			fmin = ftmp; | 
 | 		} | 
 | 	} | 
 | 	return fmax != ~0 ? fmax : fmin; | 
 | } | 
 |  | 
 | static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw, | 
 | 					   unsigned long parent_rate) | 
 | { | 
 | 	struct scpi_clk *clk = to_scpi_clk(hw); | 
 | 	int idx = clk->scpi_ops->dvfs_get_idx(clk->id); | 
 | 	const struct scpi_opp *opp; | 
 |  | 
 | 	if (idx < 0) | 
 | 		return 0; | 
 |  | 
 | 	opp = clk->info->opps + idx; | 
 | 	return opp->freq; | 
 | } | 
 |  | 
 | static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate, | 
 | 				 unsigned long *parent_rate) | 
 | { | 
 | 	struct scpi_clk *clk = to_scpi_clk(hw); | 
 |  | 
 | 	return __scpi_dvfs_round_rate(clk, rate); | 
 | } | 
 |  | 
 | static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate) | 
 | { | 
 | 	int idx, max_opp = clk->info->count; | 
 | 	const struct scpi_opp *opp = clk->info->opps; | 
 |  | 
 | 	for (idx = 0; idx < max_opp; idx++, opp++) | 
 | 		if (opp->freq == rate) | 
 | 			return idx; | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate, | 
 | 			      unsigned long parent_rate) | 
 | { | 
 | 	struct scpi_clk *clk = to_scpi_clk(hw); | 
 | 	int ret = __scpi_find_dvfs_index(clk, rate); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret); | 
 | } | 
 |  | 
 | static const struct clk_ops scpi_dvfs_ops = { | 
 | 	.recalc_rate = scpi_dvfs_recalc_rate, | 
 | 	.round_rate = scpi_dvfs_round_rate, | 
 | 	.set_rate = scpi_dvfs_set_rate, | 
 | }; | 
 |  | 
 | static const struct of_device_id scpi_clk_match[] __maybe_unused = { | 
 | 	{ .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, }, | 
 | 	{ .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, }, | 
 | 	{} | 
 | }; | 
 |  | 
 | static int | 
 | scpi_clk_ops_init(struct device *dev, const struct of_device_id *match, | 
 | 		  struct scpi_clk *sclk, const char *name) | 
 | { | 
 | 	struct clk_init_data init; | 
 | 	unsigned long min = 0, max = 0; | 
 | 	int ret; | 
 |  | 
 | 	init.name = name; | 
 | 	init.flags = 0; | 
 | 	init.num_parents = 0; | 
 | 	init.ops = match->data; | 
 | 	sclk->hw.init = &init; | 
 | 	sclk->scpi_ops = get_scpi_ops(); | 
 |  | 
 | 	if (init.ops == &scpi_dvfs_ops) { | 
 | 		sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id); | 
 | 		if (IS_ERR(sclk->info)) | 
 | 			return PTR_ERR(sclk->info); | 
 | 	} else if (init.ops == &scpi_clk_ops) { | 
 | 		if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max) | 
 | 			return -EINVAL; | 
 | 	} else { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = devm_clk_hw_register(dev, &sclk->hw); | 
 | 	if (!ret && max) | 
 | 		clk_hw_set_rate_range(&sclk->hw, min, max); | 
 | 	return ret; | 
 | } | 
 |  | 
 | struct scpi_clk_data { | 
 | 	struct scpi_clk **clk; | 
 | 	unsigned int clk_num; | 
 | }; | 
 |  | 
 | static struct clk_hw * | 
 | scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data) | 
 | { | 
 | 	struct scpi_clk *sclk; | 
 | 	struct scpi_clk_data *clk_data = data; | 
 | 	unsigned int idx = clkspec->args[0], count; | 
 |  | 
 | 	for (count = 0; count < clk_data->clk_num; count++) { | 
 | 		sclk = clk_data->clk[count]; | 
 | 		if (idx == sclk->id) | 
 | 			return &sclk->hw; | 
 | 	} | 
 |  | 
 | 	return ERR_PTR(-EINVAL); | 
 | } | 
 |  | 
 | static int scpi_clk_add(struct device *dev, struct device_node *np, | 
 | 			const struct of_device_id *match) | 
 | { | 
 | 	int idx, count, err; | 
 | 	struct scpi_clk_data *clk_data; | 
 |  | 
 | 	count = of_property_count_strings(np, "clock-output-names"); | 
 | 	if (count < 0) { | 
 | 		dev_err(dev, "%pOFn: invalid clock output count\n", np); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL); | 
 | 	if (!clk_data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	clk_data->clk_num = count; | 
 | 	clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk), | 
 | 				     GFP_KERNEL); | 
 | 	if (!clk_data->clk) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (idx = 0; idx < count; idx++) { | 
 | 		struct scpi_clk *sclk; | 
 | 		const char *name; | 
 | 		u32 val; | 
 |  | 
 | 		sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL); | 
 | 		if (!sclk) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		if (of_property_read_string_index(np, "clock-output-names", | 
 | 						  idx, &name)) { | 
 | 			dev_err(dev, "invalid clock name @ %pOFn\n", np); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		if (of_property_read_u32_index(np, "clock-indices", | 
 | 					       idx, &val)) { | 
 | 			dev_err(dev, "invalid clock index @ %pOFn\n", np); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		sclk->id = val; | 
 |  | 
 | 		err = scpi_clk_ops_init(dev, match, sclk, name); | 
 | 		if (err) { | 
 | 			dev_err(dev, "failed to register clock '%s'\n", name); | 
 | 			return err; | 
 | 		} | 
 |  | 
 | 		dev_dbg(dev, "Registered clock '%s'\n", name); | 
 | 		clk_data->clk[idx] = sclk; | 
 | 	} | 
 |  | 
 | 	return of_clk_add_hw_provider(np, scpi_of_clk_src_get, clk_data); | 
 | } | 
 |  | 
 | static int scpi_clocks_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct device_node *child, *np = dev->of_node; | 
 |  | 
 | 	if (cpufreq_dev) { | 
 | 		platform_device_unregister(cpufreq_dev); | 
 | 		cpufreq_dev = NULL; | 
 | 	} | 
 |  | 
 | 	for_each_available_child_of_node(np, child) | 
 | 		of_clk_del_provider(np); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scpi_clocks_probe(struct platform_device *pdev) | 
 | { | 
 | 	int ret; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct device_node *child, *np = dev->of_node; | 
 | 	const struct of_device_id *match; | 
 |  | 
 | 	if (!get_scpi_ops()) | 
 | 		return -ENXIO; | 
 |  | 
 | 	for_each_available_child_of_node(np, child) { | 
 | 		match = of_match_node(scpi_clk_match, child); | 
 | 		if (!match) | 
 | 			continue; | 
 | 		ret = scpi_clk_add(dev, child, match); | 
 | 		if (ret) { | 
 | 			scpi_clocks_remove(pdev); | 
 | 			of_node_put(child); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		if (match->data != &scpi_dvfs_ops) | 
 | 			continue; | 
 | 		/* Add the virtual cpufreq device if it's DVFS clock provider */ | 
 | 		cpufreq_dev = platform_device_register_simple("scpi-cpufreq", | 
 | 							      -1, NULL, 0); | 
 | 		if (IS_ERR(cpufreq_dev)) | 
 | 			pr_warn("unable to register cpufreq device"); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id scpi_clocks_ids[] = { | 
 | 	{ .compatible = "arm,scpi-clocks", }, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, scpi_clocks_ids); | 
 |  | 
 | static struct platform_driver scpi_clocks_driver = { | 
 | 	.driver	= { | 
 | 		.name = "scpi_clocks", | 
 | 		.of_match_table = scpi_clocks_ids, | 
 | 	}, | 
 | 	.probe = scpi_clocks_probe, | 
 | 	.remove = scpi_clocks_remove, | 
 | }; | 
 | module_platform_driver(scpi_clocks_driver); | 
 |  | 
 | MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); | 
 | MODULE_DESCRIPTION("ARM SCPI clock driver"); | 
 | MODULE_LICENSE("GPL v2"); |