|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | *  ideapad-laptop.c - Lenovo IdeaPad ACPI Extras | 
|  | * | 
|  | *  Copyright © 2010 Intel Corporation | 
|  | *  Copyright © 2010 David Woodhouse <dwmw2@infradead.org> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/backlight.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/bug.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/i8042.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/sparse-keymap.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/platform_profile.h> | 
|  | #include <linux/rfkill.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include <acpi/video.h> | 
|  |  | 
|  | #include <dt-bindings/leds/common.h> | 
|  |  | 
|  | #define IDEAPAD_RFKILL_DEV_NUM	3 | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_ACPI_WMI) | 
|  | static const char *const ideapad_wmi_fnesc_events[] = { | 
|  | "26CAB2E5-5CF1-46AE-AAC3-4A12B6BA50E6", /* Yoga 3 */ | 
|  | "56322276-8493-4CE8-A783-98C991274F5E", /* Yoga 700 */ | 
|  | "8FC0DE0C-B4E4-43FD-B0F3-8871711C1294", /* Legion 5 */ | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | enum { | 
|  | CFG_CAP_BT_BIT       = 16, | 
|  | CFG_CAP_3G_BIT       = 17, | 
|  | CFG_CAP_WIFI_BIT     = 18, | 
|  | CFG_CAP_CAM_BIT      = 19, | 
|  | CFG_CAP_TOUCHPAD_BIT = 30, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | GBMD_CONSERVATION_STATE_BIT = 5, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SBMC_CONSERVATION_ON  = 3, | 
|  | SBMC_CONSERVATION_OFF = 5, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | HALS_KBD_BL_SUPPORT_BIT       = 4, | 
|  | HALS_KBD_BL_STATE_BIT         = 5, | 
|  | HALS_USB_CHARGING_SUPPORT_BIT = 6, | 
|  | HALS_USB_CHARGING_STATE_BIT   = 7, | 
|  | HALS_FNLOCK_SUPPORT_BIT       = 9, | 
|  | HALS_FNLOCK_STATE_BIT         = 10, | 
|  | HALS_HOTKEYS_PRIMARY_BIT      = 11, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SALS_KBD_BL_ON        = 0x8, | 
|  | SALS_KBD_BL_OFF       = 0x9, | 
|  | SALS_USB_CHARGING_ON  = 0xa, | 
|  | SALS_USB_CHARGING_OFF = 0xb, | 
|  | SALS_FNLOCK_ON        = 0xe, | 
|  | SALS_FNLOCK_OFF       = 0xf, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | VPCCMD_R_VPC1 = 0x10, | 
|  | VPCCMD_R_BL_MAX, | 
|  | VPCCMD_R_BL, | 
|  | VPCCMD_W_BL, | 
|  | VPCCMD_R_WIFI, | 
|  | VPCCMD_W_WIFI, | 
|  | VPCCMD_R_BT, | 
|  | VPCCMD_W_BT, | 
|  | VPCCMD_R_BL_POWER, | 
|  | VPCCMD_R_NOVO, | 
|  | VPCCMD_R_VPC2, | 
|  | VPCCMD_R_TOUCHPAD, | 
|  | VPCCMD_W_TOUCHPAD, | 
|  | VPCCMD_R_CAMERA, | 
|  | VPCCMD_W_CAMERA, | 
|  | VPCCMD_R_3G, | 
|  | VPCCMD_W_3G, | 
|  | VPCCMD_R_ODD, /* 0x21 */ | 
|  | VPCCMD_W_FAN, | 
|  | VPCCMD_R_RF, | 
|  | VPCCMD_W_RF, | 
|  | VPCCMD_R_FAN = 0x2B, | 
|  | VPCCMD_R_SPECIAL_BUTTONS = 0x31, | 
|  | VPCCMD_W_BL_POWER = 0x33, | 
|  | }; | 
|  |  | 
|  | struct ideapad_dytc_priv { | 
|  | enum platform_profile_option current_profile; | 
|  | struct platform_profile_handler pprof; | 
|  | struct mutex mutex; /* protects the DYTC interface */ | 
|  | struct ideapad_private *priv; | 
|  | }; | 
|  |  | 
|  | struct ideapad_rfk_priv { | 
|  | int dev; | 
|  | struct ideapad_private *priv; | 
|  | }; | 
|  |  | 
|  | struct ideapad_private { | 
|  | struct acpi_device *adev; | 
|  | struct rfkill *rfk[IDEAPAD_RFKILL_DEV_NUM]; | 
|  | struct ideapad_rfk_priv rfk_priv[IDEAPAD_RFKILL_DEV_NUM]; | 
|  | struct platform_device *platform_device; | 
|  | struct input_dev *inputdev; | 
|  | struct backlight_device *blightdev; | 
|  | struct ideapad_dytc_priv *dytc; | 
|  | struct dentry *debug; | 
|  | unsigned long cfg; | 
|  | const char *fnesc_guid; | 
|  | struct { | 
|  | bool conservation_mode    : 1; | 
|  | bool dytc                 : 1; | 
|  | bool fan_mode             : 1; | 
|  | bool fn_lock              : 1; | 
|  | bool hw_rfkill_switch     : 1; | 
|  | bool kbd_bl               : 1; | 
|  | bool touchpad_ctrl_via_ec : 1; | 
|  | bool usb_charging         : 1; | 
|  | } features; | 
|  | struct { | 
|  | bool initialized; | 
|  | struct led_classdev led; | 
|  | unsigned int last_brightness; | 
|  | } kbd_bl; | 
|  | }; | 
|  |  | 
|  | static bool no_bt_rfkill; | 
|  | module_param(no_bt_rfkill, bool, 0444); | 
|  | MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth."); | 
|  |  | 
|  | /* | 
|  | * ACPI Helpers | 
|  | */ | 
|  | #define IDEAPAD_EC_TIMEOUT 200 /* in ms */ | 
|  |  | 
|  | static int eval_int(acpi_handle handle, const char *name, unsigned long *res) | 
|  | { | 
|  | unsigned long long result; | 
|  | acpi_status status; | 
|  |  | 
|  | status = acpi_evaluate_integer(handle, (char *)name, NULL, &result); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -EIO; | 
|  |  | 
|  | *res = result; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int exec_simple_method(acpi_handle handle, const char *name, unsigned long arg) | 
|  | { | 
|  | acpi_status status = acpi_execute_simple_method(handle, (char *)name, arg); | 
|  |  | 
|  | return ACPI_FAILURE(status) ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | static int eval_gbmd(acpi_handle handle, unsigned long *res) | 
|  | { | 
|  | return eval_int(handle, "GBMD", res); | 
|  | } | 
|  |  | 
|  | static int exec_sbmc(acpi_handle handle, unsigned long arg) | 
|  | { | 
|  | return exec_simple_method(handle, "SBMC", arg); | 
|  | } | 
|  |  | 
|  | static int eval_hals(acpi_handle handle, unsigned long *res) | 
|  | { | 
|  | return eval_int(handle, "HALS", res); | 
|  | } | 
|  |  | 
|  | static int exec_sals(acpi_handle handle, unsigned long arg) | 
|  | { | 
|  | return exec_simple_method(handle, "SALS", arg); | 
|  | } | 
|  |  | 
|  | static int eval_int_with_arg(acpi_handle handle, const char *name, unsigned long arg, unsigned long *res) | 
|  | { | 
|  | struct acpi_object_list params; | 
|  | unsigned long long result; | 
|  | union acpi_object in_obj; | 
|  | acpi_status status; | 
|  |  | 
|  | params.count = 1; | 
|  | params.pointer = &in_obj; | 
|  | in_obj.type = ACPI_TYPE_INTEGER; | 
|  | in_obj.integer.value = arg; | 
|  |  | 
|  | status = acpi_evaluate_integer(handle, (char *)name, ¶ms, &result); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -EIO; | 
|  |  | 
|  | if (res) | 
|  | *res = result; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int eval_dytc(acpi_handle handle, unsigned long cmd, unsigned long *res) | 
|  | { | 
|  | return eval_int_with_arg(handle, "DYTC", cmd, res); | 
|  | } | 
|  |  | 
|  | static int eval_vpcr(acpi_handle handle, unsigned long cmd, unsigned long *res) | 
|  | { | 
|  | return eval_int_with_arg(handle, "VPCR", cmd, res); | 
|  | } | 
|  |  | 
|  | static int eval_vpcw(acpi_handle handle, unsigned long cmd, unsigned long data) | 
|  | { | 
|  | struct acpi_object_list params; | 
|  | union acpi_object in_obj[2]; | 
|  | acpi_status status; | 
|  |  | 
|  | params.count = 2; | 
|  | params.pointer = in_obj; | 
|  | in_obj[0].type = ACPI_TYPE_INTEGER; | 
|  | in_obj[0].integer.value = cmd; | 
|  | in_obj[1].type = ACPI_TYPE_INTEGER; | 
|  | in_obj[1].integer.value = data; | 
|  |  | 
|  | status = acpi_evaluate_object(handle, "VPCW", ¶ms, NULL); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int read_ec_data(acpi_handle handle, unsigned long cmd, unsigned long *data) | 
|  | { | 
|  | unsigned long end_jiffies, val; | 
|  | int err; | 
|  |  | 
|  | err = eval_vpcw(handle, 1, cmd); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; | 
|  |  | 
|  | while (time_before(jiffies, end_jiffies)) { | 
|  | schedule(); | 
|  |  | 
|  | err = eval_vpcr(handle, 1, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (val == 0) | 
|  | return eval_vpcr(handle, 0, data); | 
|  | } | 
|  |  | 
|  | acpi_handle_err(handle, "timeout in %s\n", __func__); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int write_ec_cmd(acpi_handle handle, unsigned long cmd, unsigned long data) | 
|  | { | 
|  | unsigned long end_jiffies, val; | 
|  | int err; | 
|  |  | 
|  | err = eval_vpcw(handle, 0, data); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = eval_vpcw(handle, 1, cmd); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1; | 
|  |  | 
|  | while (time_before(jiffies, end_jiffies)) { | 
|  | schedule(); | 
|  |  | 
|  | err = eval_vpcr(handle, 1, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (val == 0) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | acpi_handle_err(handle, "timeout in %s\n", __func__); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * debugfs | 
|  | */ | 
|  | static int debugfs_status_show(struct seq_file *s, void *data) | 
|  | { | 
|  | struct ideapad_private *priv = s->private; | 
|  | unsigned long value; | 
|  |  | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &value)) | 
|  | seq_printf(s, "Backlight max:  %lu\n", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL, &value)) | 
|  | seq_printf(s, "Backlight now:  %lu\n", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &value)) | 
|  | seq_printf(s, "BL power value: %s (%lu)\n", value ? "on" : "off", value); | 
|  |  | 
|  | seq_puts(s, "=====================\n"); | 
|  |  | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_RF, &value)) | 
|  | seq_printf(s, "Radio status: %s (%lu)\n", value ? "on" : "off", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_WIFI, &value)) | 
|  | seq_printf(s, "Wifi status:  %s (%lu)\n", value ? "on" : "off", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_BT, &value)) | 
|  | seq_printf(s, "BT status:    %s (%lu)\n", value ? "on" : "off", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_3G, &value)) | 
|  | seq_printf(s, "3G status:    %s (%lu)\n", value ? "on" : "off", value); | 
|  |  | 
|  | seq_puts(s, "=====================\n"); | 
|  |  | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) | 
|  | seq_printf(s, "Touchpad status: %s (%lu)\n", value ? "on" : "off", value); | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &value)) | 
|  | seq_printf(s, "Camera status:   %s (%lu)\n", value ? "on" : "off", value); | 
|  |  | 
|  | seq_puts(s, "=====================\n"); | 
|  |  | 
|  | if (!eval_gbmd(priv->adev->handle, &value)) | 
|  | seq_printf(s, "GBMD: %#010lx\n", value); | 
|  | if (!eval_hals(priv->adev->handle, &value)) | 
|  | seq_printf(s, "HALS: %#010lx\n", value); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | DEFINE_SHOW_ATTRIBUTE(debugfs_status); | 
|  |  | 
|  | static int debugfs_cfg_show(struct seq_file *s, void *data) | 
|  | { | 
|  | struct ideapad_private *priv = s->private; | 
|  |  | 
|  | seq_printf(s, "_CFG: %#010lx\n\n", priv->cfg); | 
|  |  | 
|  | seq_puts(s, "Capabilities:"); | 
|  | if (test_bit(CFG_CAP_BT_BIT, &priv->cfg)) | 
|  | seq_puts(s, " bluetooth"); | 
|  | if (test_bit(CFG_CAP_3G_BIT, &priv->cfg)) | 
|  | seq_puts(s, " 3G"); | 
|  | if (test_bit(CFG_CAP_WIFI_BIT, &priv->cfg)) | 
|  | seq_puts(s, " wifi"); | 
|  | if (test_bit(CFG_CAP_CAM_BIT, &priv->cfg)) | 
|  | seq_puts(s, " camera"); | 
|  | if (test_bit(CFG_CAP_TOUCHPAD_BIT, &priv->cfg)) | 
|  | seq_puts(s, " touchpad"); | 
|  | seq_puts(s, "\n"); | 
|  |  | 
|  | seq_puts(s, "Graphics: "); | 
|  | switch (priv->cfg & 0x700) { | 
|  | case 0x100: | 
|  | seq_puts(s, "Intel"); | 
|  | break; | 
|  | case 0x200: | 
|  | seq_puts(s, "ATI"); | 
|  | break; | 
|  | case 0x300: | 
|  | seq_puts(s, "Nvidia"); | 
|  | break; | 
|  | case 0x400: | 
|  | seq_puts(s, "Intel and ATI"); | 
|  | break; | 
|  | case 0x500: | 
|  | seq_puts(s, "Intel and Nvidia"); | 
|  | break; | 
|  | } | 
|  | seq_puts(s, "\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | DEFINE_SHOW_ATTRIBUTE(debugfs_cfg); | 
|  |  | 
|  | static void ideapad_debugfs_init(struct ideapad_private *priv) | 
|  | { | 
|  | struct dentry *dir; | 
|  |  | 
|  | dir = debugfs_create_dir("ideapad", NULL); | 
|  | priv->debug = dir; | 
|  |  | 
|  | debugfs_create_file("cfg", 0444, dir, priv, &debugfs_cfg_fops); | 
|  | debugfs_create_file("status", 0444, dir, priv, &debugfs_status_fops); | 
|  | } | 
|  |  | 
|  | static void ideapad_debugfs_exit(struct ideapad_private *priv) | 
|  | { | 
|  | debugfs_remove_recursive(priv->debug); | 
|  | priv->debug = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sysfs | 
|  | */ | 
|  | static ssize_t camera_power_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long result; | 
|  | int err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &result); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", !!result); | 
|  | } | 
|  |  | 
|  | static ssize_t camera_power_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtobool(buf, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(camera_power); | 
|  |  | 
|  | static ssize_t conservation_mode_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long result; | 
|  | int err; | 
|  |  | 
|  | err = eval_gbmd(priv->adev->handle, &result); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", !!test_bit(GBMD_CONSERVATION_STATE_BIT, &result)); | 
|  | } | 
|  |  | 
|  | static ssize_t conservation_mode_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtobool(buf, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = exec_sbmc(priv->adev->handle, state ? SBMC_CONSERVATION_ON : SBMC_CONSERVATION_OFF); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(conservation_mode); | 
|  |  | 
|  | static ssize_t fan_mode_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long result; | 
|  | int err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_FAN, &result); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%lu\n", result); | 
|  | } | 
|  |  | 
|  | static ssize_t fan_mode_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned int state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtouint(buf, 0, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (state > 4 || state == 3) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = write_ec_cmd(priv->adev->handle, VPCCMD_W_FAN, state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(fan_mode); | 
|  |  | 
|  | static ssize_t fn_lock_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long hals; | 
|  | int err; | 
|  |  | 
|  | err = eval_hals(priv->adev->handle, &hals); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", !!test_bit(HALS_FNLOCK_STATE_BIT, &hals)); | 
|  | } | 
|  |  | 
|  | static ssize_t fn_lock_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtobool(buf, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(fn_lock); | 
|  |  | 
|  | static ssize_t touchpad_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long result; | 
|  | int err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &result); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", !!result); | 
|  | } | 
|  |  | 
|  | static ssize_t touchpad_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtobool(buf, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(touchpad); | 
|  |  | 
|  | static ssize_t usb_charging_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | unsigned long hals; | 
|  | int err; | 
|  |  | 
|  | err = eval_hals(priv->adev->handle, &hals); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", !!test_bit(HALS_USB_CHARGING_STATE_BIT, &hals)); | 
|  | } | 
|  |  | 
|  | static ssize_t usb_charging_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool state; | 
|  | int err; | 
|  |  | 
|  | err = kstrtobool(buf, &state); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = exec_sals(priv->adev->handle, state ? SALS_USB_CHARGING_ON : SALS_USB_CHARGING_OFF); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(usb_charging); | 
|  |  | 
|  | static struct attribute *ideapad_attributes[] = { | 
|  | &dev_attr_camera_power.attr, | 
|  | &dev_attr_conservation_mode.attr, | 
|  | &dev_attr_fan_mode.attr, | 
|  | &dev_attr_fn_lock.attr, | 
|  | &dev_attr_touchpad.attr, | 
|  | &dev_attr_usb_charging.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static umode_t ideapad_is_visible(struct kobject *kobj, | 
|  | struct attribute *attr, | 
|  | int idx) | 
|  | { | 
|  | struct device *dev = kobj_to_dev(kobj); | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  | bool supported = true; | 
|  |  | 
|  | if (attr == &dev_attr_camera_power.attr) | 
|  | supported = test_bit(CFG_CAP_CAM_BIT, &priv->cfg); | 
|  | else if (attr == &dev_attr_conservation_mode.attr) | 
|  | supported = priv->features.conservation_mode; | 
|  | else if (attr == &dev_attr_fan_mode.attr) | 
|  | supported = priv->features.fan_mode; | 
|  | else if (attr == &dev_attr_fn_lock.attr) | 
|  | supported = priv->features.fn_lock; | 
|  | else if (attr == &dev_attr_touchpad.attr) | 
|  | supported = priv->features.touchpad_ctrl_via_ec && | 
|  | test_bit(CFG_CAP_TOUCHPAD_BIT, &priv->cfg); | 
|  | else if (attr == &dev_attr_usb_charging.attr) | 
|  | supported = priv->features.usb_charging; | 
|  |  | 
|  | return supported ? attr->mode : 0; | 
|  | } | 
|  |  | 
|  | static const struct attribute_group ideapad_attribute_group = { | 
|  | .is_visible = ideapad_is_visible, | 
|  | .attrs = ideapad_attributes | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * DYTC Platform profile | 
|  | */ | 
|  | #define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */ | 
|  | #define DYTC_CMD_SET          1 /* To enable/disable IC function mode */ | 
|  | #define DYTC_CMD_GET          2 /* To get current IC function and mode */ | 
|  | #define DYTC_CMD_RESET    0x1ff /* To reset back to default */ | 
|  |  | 
|  | #define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */ | 
|  | #define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ | 
|  | #define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */ | 
|  |  | 
|  | #define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */ | 
|  | #define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */ | 
|  |  | 
|  | #define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */ | 
|  | #define DYTC_SET_MODE_BIT     16 /* Bits 16-19 - mode setting */ | 
|  | #define DYTC_SET_VALID_BIT    20 /* Bit     20 - 1 = on, 0 = off */ | 
|  |  | 
|  | #define DYTC_FUNCTION_STD     0  /* Function = 0, standard mode */ | 
|  | #define DYTC_FUNCTION_CQL     1  /* Function = 1, lap mode */ | 
|  | #define DYTC_FUNCTION_MMC     11 /* Function = 11, desk mode */ | 
|  |  | 
|  | #define DYTC_MODE_PERFORM     2  /* High power mode aka performance */ | 
|  | #define DYTC_MODE_LOW_POWER       3  /* Low power mode aka quiet */ | 
|  | #define DYTC_MODE_BALANCE   0xF  /* Default mode aka balanced */ | 
|  |  | 
|  | #define DYTC_SET_COMMAND(function, mode, on) \ | 
|  | (DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \ | 
|  | (mode) << DYTC_SET_MODE_BIT | \ | 
|  | (on) << DYTC_SET_VALID_BIT) | 
|  |  | 
|  | #define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0) | 
|  |  | 
|  | #define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1) | 
|  |  | 
|  | static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile) | 
|  | { | 
|  | switch (dytcmode) { | 
|  | case DYTC_MODE_LOW_POWER: | 
|  | *profile = PLATFORM_PROFILE_LOW_POWER; | 
|  | break; | 
|  | case DYTC_MODE_BALANCE: | 
|  | *profile =  PLATFORM_PROFILE_BALANCED; | 
|  | break; | 
|  | case DYTC_MODE_PERFORM: | 
|  | *profile =  PLATFORM_PROFILE_PERFORMANCE; | 
|  | break; | 
|  | default: /* Unknown mode */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode) | 
|  | { | 
|  | switch (profile) { | 
|  | case PLATFORM_PROFILE_LOW_POWER: | 
|  | *perfmode = DYTC_MODE_LOW_POWER; | 
|  | break; | 
|  | case PLATFORM_PROFILE_BALANCED: | 
|  | *perfmode = DYTC_MODE_BALANCE; | 
|  | break; | 
|  | case PLATFORM_PROFILE_PERFORMANCE: | 
|  | *perfmode = DYTC_MODE_PERFORM; | 
|  | break; | 
|  | default: /* Unknown profile */ | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * dytc_profile_get: Function to register with platform_profile | 
|  | * handler. Returns current platform profile. | 
|  | */ | 
|  | static int dytc_profile_get(struct platform_profile_handler *pprof, | 
|  | enum platform_profile_option *profile) | 
|  | { | 
|  | struct ideapad_dytc_priv *dytc = container_of(pprof, struct ideapad_dytc_priv, pprof); | 
|  |  | 
|  | *profile = dytc->current_profile; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Helper function - check if we are in CQL mode and if we are | 
|  | *  - disable CQL, | 
|  | *  - run the command | 
|  | *  - enable CQL | 
|  | *  If not in CQL mode, just run the command | 
|  | */ | 
|  | static int dytc_cql_command(struct ideapad_private *priv, unsigned long cmd, | 
|  | unsigned long *output) | 
|  | { | 
|  | int err, cmd_err, cur_funcmode; | 
|  |  | 
|  | /* Determine if we are in CQL mode. This alters the commands we do */ | 
|  | err = eval_dytc(priv->adev->handle, DYTC_CMD_GET, output); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF; | 
|  | /* Check if we're OK to return immediately */ | 
|  | if (cmd == DYTC_CMD_GET && cur_funcmode != DYTC_FUNCTION_CQL) | 
|  | return 0; | 
|  |  | 
|  | if (cur_funcmode == DYTC_FUNCTION_CQL) { | 
|  | err = eval_dytc(priv->adev->handle, DYTC_DISABLE_CQL, NULL); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | cmd_err = eval_dytc(priv->adev->handle, cmd, output); | 
|  | /* Check return condition after we've restored CQL state */ | 
|  |  | 
|  | if (cur_funcmode == DYTC_FUNCTION_CQL) { | 
|  | err = eval_dytc(priv->adev->handle, DYTC_ENABLE_CQL, NULL); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return cmd_err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * dytc_profile_set: Function to register with platform_profile | 
|  | * handler. Sets current platform profile. | 
|  | */ | 
|  | static int dytc_profile_set(struct platform_profile_handler *pprof, | 
|  | enum platform_profile_option profile) | 
|  | { | 
|  | struct ideapad_dytc_priv *dytc = container_of(pprof, struct ideapad_dytc_priv, pprof); | 
|  | struct ideapad_private *priv = dytc->priv; | 
|  | unsigned long output; | 
|  | int err; | 
|  |  | 
|  | err = mutex_lock_interruptible(&dytc->mutex); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (profile == PLATFORM_PROFILE_BALANCED) { | 
|  | /* To get back to balanced mode we just issue a reset command */ | 
|  | err = eval_dytc(priv->adev->handle, DYTC_CMD_RESET, NULL); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } else { | 
|  | int perfmode; | 
|  |  | 
|  | err = convert_profile_to_dytc(profile, &perfmode); | 
|  | if (err) | 
|  | goto unlock; | 
|  |  | 
|  | /* Determine if we are in CQL mode. This alters the commands we do */ | 
|  | err = dytc_cql_command(priv, DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), | 
|  | &output); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* Success - update current profile */ | 
|  | dytc->current_profile = profile; | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&dytc->mutex); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void dytc_profile_refresh(struct ideapad_private *priv) | 
|  | { | 
|  | enum platform_profile_option profile; | 
|  | unsigned long output; | 
|  | int err, perfmode; | 
|  |  | 
|  | mutex_lock(&priv->dytc->mutex); | 
|  | err = dytc_cql_command(priv, DYTC_CMD_GET, &output); | 
|  | mutex_unlock(&priv->dytc->mutex); | 
|  | if (err) | 
|  | return; | 
|  |  | 
|  | perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF; | 
|  |  | 
|  | if (convert_dytc_to_profile(perfmode, &profile)) | 
|  | return; | 
|  |  | 
|  | if (profile != priv->dytc->current_profile) { | 
|  | priv->dytc->current_profile = profile; | 
|  | platform_profile_notify(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id ideapad_dytc_v4_allow_table[] = { | 
|  | { | 
|  | /* Ideapad 5 Pro 16ACH6 */ | 
|  | .ident = "LENOVO 82L5", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "82L5") | 
|  | } | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static int ideapad_dytc_profile_init(struct ideapad_private *priv) | 
|  | { | 
|  | int err, dytc_version; | 
|  | unsigned long output; | 
|  |  | 
|  | if (!priv->features.dytc) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = eval_dytc(priv->adev->handle, DYTC_CMD_QUERY, &output); | 
|  | /* For all other errors we can flag the failure */ | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* Check DYTC is enabled and supports mode setting */ | 
|  | if (!test_bit(DYTC_QUERY_ENABLE_BIT, &output)) { | 
|  | dev_info(&priv->platform_device->dev, "DYTC_QUERY_ENABLE_BIT returned false\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; | 
|  |  | 
|  | if (dytc_version < 5) { | 
|  | if (dytc_version < 4 || !dmi_check_system(ideapad_dytc_v4_allow_table)) { | 
|  | dev_info(&priv->platform_device->dev, | 
|  | "DYTC_VERSION is less than 4 or is not allowed: %d\n", | 
|  | dytc_version); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->dytc = kzalloc(sizeof(*priv->dytc), GFP_KERNEL); | 
|  | if (!priv->dytc) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&priv->dytc->mutex); | 
|  |  | 
|  | priv->dytc->priv = priv; | 
|  | priv->dytc->pprof.profile_get = dytc_profile_get; | 
|  | priv->dytc->pprof.profile_set = dytc_profile_set; | 
|  |  | 
|  | /* Setup supported modes */ | 
|  | set_bit(PLATFORM_PROFILE_LOW_POWER, priv->dytc->pprof.choices); | 
|  | set_bit(PLATFORM_PROFILE_BALANCED, priv->dytc->pprof.choices); | 
|  | set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->dytc->pprof.choices); | 
|  |  | 
|  | /* Create platform_profile structure and register */ | 
|  | err = platform_profile_register(&priv->dytc->pprof); | 
|  | if (err) | 
|  | goto pp_reg_failed; | 
|  |  | 
|  | /* Ensure initial values are correct */ | 
|  | dytc_profile_refresh(priv); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | pp_reg_failed: | 
|  | mutex_destroy(&priv->dytc->mutex); | 
|  | kfree(priv->dytc); | 
|  | priv->dytc = NULL; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ideapad_dytc_profile_exit(struct ideapad_private *priv) | 
|  | { | 
|  | if (!priv->dytc) | 
|  | return; | 
|  |  | 
|  | platform_profile_remove(); | 
|  | mutex_destroy(&priv->dytc->mutex); | 
|  | kfree(priv->dytc); | 
|  |  | 
|  | priv->dytc = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Rfkill | 
|  | */ | 
|  | struct ideapad_rfk_data { | 
|  | char *name; | 
|  | int cfgbit; | 
|  | int opcode; | 
|  | int type; | 
|  | }; | 
|  |  | 
|  | static const struct ideapad_rfk_data ideapad_rfk_data[] = { | 
|  | { "ideapad_wlan",      CFG_CAP_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN }, | 
|  | { "ideapad_bluetooth", CFG_CAP_BT_BIT,   VPCCMD_W_BT,   RFKILL_TYPE_BLUETOOTH }, | 
|  | { "ideapad_3g",        CFG_CAP_3G_BIT,   VPCCMD_W_3G,   RFKILL_TYPE_WWAN }, | 
|  | }; | 
|  |  | 
|  | static int ideapad_rfk_set(void *data, bool blocked) | 
|  | { | 
|  | struct ideapad_rfk_priv *priv = data; | 
|  | int opcode = ideapad_rfk_data[priv->dev].opcode; | 
|  |  | 
|  | return write_ec_cmd(priv->priv->adev->handle, opcode, !blocked); | 
|  | } | 
|  |  | 
|  | static const struct rfkill_ops ideapad_rfk_ops = { | 
|  | .set_block = ideapad_rfk_set, | 
|  | }; | 
|  |  | 
|  | static void ideapad_sync_rfk_state(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long hw_blocked = 0; | 
|  | int i; | 
|  |  | 
|  | if (priv->features.hw_rfkill_switch) { | 
|  | if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked)) | 
|  | return; | 
|  | hw_blocked = !hw_blocked; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) | 
|  | if (priv->rfk[i]) | 
|  | rfkill_set_hw_state(priv->rfk[i], hw_blocked); | 
|  | } | 
|  |  | 
|  | static int ideapad_register_rfkill(struct ideapad_private *priv, int dev) | 
|  | { | 
|  | unsigned long rf_enabled; | 
|  | int err; | 
|  |  | 
|  | if (no_bt_rfkill && ideapad_rfk_data[dev].type == RFKILL_TYPE_BLUETOOTH) { | 
|  | /* Force to enable bluetooth when no_bt_rfkill=1 */ | 
|  | write_ec_cmd(priv->adev->handle, ideapad_rfk_data[dev].opcode, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | priv->rfk_priv[dev].dev = dev; | 
|  | priv->rfk_priv[dev].priv = priv; | 
|  |  | 
|  | priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev].name, | 
|  | &priv->platform_device->dev, | 
|  | ideapad_rfk_data[dev].type, | 
|  | &ideapad_rfk_ops, | 
|  | &priv->rfk_priv[dev]); | 
|  | if (!priv->rfk[dev]) | 
|  | return -ENOMEM; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, ideapad_rfk_data[dev].opcode - 1, &rf_enabled); | 
|  | if (err) | 
|  | rf_enabled = 1; | 
|  |  | 
|  | rfkill_init_sw_state(priv->rfk[dev], !rf_enabled); | 
|  |  | 
|  | err = rfkill_register(priv->rfk[dev]); | 
|  | if (err) | 
|  | rfkill_destroy(priv->rfk[dev]); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ideapad_unregister_rfkill(struct ideapad_private *priv, int dev) | 
|  | { | 
|  | if (!priv->rfk[dev]) | 
|  | return; | 
|  |  | 
|  | rfkill_unregister(priv->rfk[dev]); | 
|  | rfkill_destroy(priv->rfk[dev]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Platform device | 
|  | */ | 
|  | static int ideapad_sysfs_init(struct ideapad_private *priv) | 
|  | { | 
|  | return device_add_group(&priv->platform_device->dev, | 
|  | &ideapad_attribute_group); | 
|  | } | 
|  |  | 
|  | static void ideapad_sysfs_exit(struct ideapad_private *priv) | 
|  | { | 
|  | device_remove_group(&priv->platform_device->dev, | 
|  | &ideapad_attribute_group); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * input device | 
|  | */ | 
|  | static const struct key_entry ideapad_keymap[] = { | 
|  | { KE_KEY,   6, { KEY_SWITCHVIDEOMODE } }, | 
|  | { KE_KEY,   7, { KEY_CAMERA } }, | 
|  | { KE_KEY,   8, { KEY_MICMUTE } }, | 
|  | { KE_KEY,  11, { KEY_F16 } }, | 
|  | { KE_KEY,  13, { KEY_WLAN } }, | 
|  | { KE_KEY,  16, { KEY_PROG1 } }, | 
|  | { KE_KEY,  17, { KEY_PROG2 } }, | 
|  | { KE_KEY,  64, { KEY_PROG3 } }, | 
|  | { KE_KEY,  65, { KEY_PROG4 } }, | 
|  | { KE_KEY,  66, { KEY_TOUCHPAD_OFF } }, | 
|  | { KE_KEY,  67, { KEY_TOUCHPAD_ON } }, | 
|  | { KE_KEY, 128, { KEY_ESC } }, | 
|  | { KE_END }, | 
|  | }; | 
|  |  | 
|  | static int ideapad_input_init(struct ideapad_private *priv) | 
|  | { | 
|  | struct input_dev *inputdev; | 
|  | int err; | 
|  |  | 
|  | inputdev = input_allocate_device(); | 
|  | if (!inputdev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | inputdev->name = "Ideapad extra buttons"; | 
|  | inputdev->phys = "ideapad/input0"; | 
|  | inputdev->id.bustype = BUS_HOST; | 
|  | inputdev->dev.parent = &priv->platform_device->dev; | 
|  |  | 
|  | err = sparse_keymap_setup(inputdev, ideapad_keymap, NULL); | 
|  | if (err) { | 
|  | dev_err(&priv->platform_device->dev, | 
|  | "Could not set up input device keymap: %d\n", err); | 
|  | goto err_free_dev; | 
|  | } | 
|  |  | 
|  | err = input_register_device(inputdev); | 
|  | if (err) { | 
|  | dev_err(&priv->platform_device->dev, | 
|  | "Could not register input device: %d\n", err); | 
|  | goto err_free_dev; | 
|  | } | 
|  |  | 
|  | priv->inputdev = inputdev; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_dev: | 
|  | input_free_device(inputdev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ideapad_input_exit(struct ideapad_private *priv) | 
|  | { | 
|  | input_unregister_device(priv->inputdev); | 
|  | priv->inputdev = NULL; | 
|  | } | 
|  |  | 
|  | static void ideapad_input_report(struct ideapad_private *priv, | 
|  | unsigned long scancode) | 
|  | { | 
|  | sparse_keymap_report_event(priv->inputdev, scancode, 1, true); | 
|  | } | 
|  |  | 
|  | static void ideapad_input_novokey(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long long_pressed; | 
|  |  | 
|  | if (read_ec_data(priv->adev->handle, VPCCMD_R_NOVO, &long_pressed)) | 
|  | return; | 
|  |  | 
|  | if (long_pressed) | 
|  | ideapad_input_report(priv, 17); | 
|  | else | 
|  | ideapad_input_report(priv, 16); | 
|  | } | 
|  |  | 
|  | static void ideapad_check_special_buttons(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long bit, value; | 
|  |  | 
|  | if (read_ec_data(priv->adev->handle, VPCCMD_R_SPECIAL_BUTTONS, &value)) | 
|  | return; | 
|  |  | 
|  | for_each_set_bit (bit, &value, 16) { | 
|  | switch (bit) { | 
|  | case 6:	/* Z570 */ | 
|  | case 0:	/* Z580 */ | 
|  | /* Thermal Management button */ | 
|  | ideapad_input_report(priv, 65); | 
|  | break; | 
|  | case 1: | 
|  | /* OneKey Theater button */ | 
|  | ideapad_input_report(priv, 64); | 
|  | break; | 
|  | default: | 
|  | dev_info(&priv->platform_device->dev, | 
|  | "Unknown special button: %lu\n", bit); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * backlight | 
|  | */ | 
|  | static int ideapad_backlight_get_brightness(struct backlight_device *blightdev) | 
|  | { | 
|  | struct ideapad_private *priv = bl_get_data(blightdev); | 
|  | unsigned long now; | 
|  | int err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return now; | 
|  | } | 
|  |  | 
|  | static int ideapad_backlight_update_status(struct backlight_device *blightdev) | 
|  | { | 
|  | struct ideapad_private *priv = bl_get_data(blightdev); | 
|  | int err; | 
|  |  | 
|  | err = write_ec_cmd(priv->adev->handle, VPCCMD_W_BL, | 
|  | blightdev->props.brightness); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = write_ec_cmd(priv->adev->handle, VPCCMD_W_BL_POWER, | 
|  | blightdev->props.power != FB_BLANK_POWERDOWN); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct backlight_ops ideapad_backlight_ops = { | 
|  | .get_brightness = ideapad_backlight_get_brightness, | 
|  | .update_status = ideapad_backlight_update_status, | 
|  | }; | 
|  |  | 
|  | static int ideapad_backlight_init(struct ideapad_private *priv) | 
|  | { | 
|  | struct backlight_device *blightdev; | 
|  | struct backlight_properties props; | 
|  | unsigned long max, now, power; | 
|  | int err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &max); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | memset(&props, 0, sizeof(props)); | 
|  |  | 
|  | props.max_brightness = max; | 
|  | props.type = BACKLIGHT_PLATFORM; | 
|  |  | 
|  | blightdev = backlight_device_register("ideapad", | 
|  | &priv->platform_device->dev, | 
|  | priv, | 
|  | &ideapad_backlight_ops, | 
|  | &props); | 
|  | if (IS_ERR(blightdev)) { | 
|  | err = PTR_ERR(blightdev); | 
|  | dev_err(&priv->platform_device->dev, | 
|  | "Could not register backlight device: %d\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | priv->blightdev = blightdev; | 
|  | blightdev->props.brightness = now; | 
|  | blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; | 
|  |  | 
|  | backlight_update_status(blightdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ideapad_backlight_exit(struct ideapad_private *priv) | 
|  | { | 
|  | backlight_device_unregister(priv->blightdev); | 
|  | priv->blightdev = NULL; | 
|  | } | 
|  |  | 
|  | static void ideapad_backlight_notify_power(struct ideapad_private *priv) | 
|  | { | 
|  | struct backlight_device *blightdev = priv->blightdev; | 
|  | unsigned long power; | 
|  |  | 
|  | if (!blightdev) | 
|  | return; | 
|  |  | 
|  | if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power)) | 
|  | return; | 
|  |  | 
|  | blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; | 
|  | } | 
|  |  | 
|  | static void ideapad_backlight_notify_brightness(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long now; | 
|  |  | 
|  | /* if we control brightness via acpi video driver */ | 
|  | if (!priv->blightdev) | 
|  | read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now); | 
|  | else | 
|  | backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * keyboard backlight | 
|  | */ | 
|  | static int ideapad_kbd_bl_brightness_get(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long hals; | 
|  | int err; | 
|  |  | 
|  | err = eval_hals(priv->adev->handle, &hals); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return !!test_bit(HALS_KBD_BL_STATE_BIT, &hals); | 
|  | } | 
|  |  | 
|  | static enum led_brightness ideapad_kbd_bl_led_cdev_brightness_get(struct led_classdev *led_cdev) | 
|  | { | 
|  | struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); | 
|  |  | 
|  | return ideapad_kbd_bl_brightness_get(priv); | 
|  | } | 
|  |  | 
|  | static int ideapad_kbd_bl_brightness_set(struct ideapad_private *priv, unsigned int brightness) | 
|  | { | 
|  | int err = exec_sals(priv->adev->handle, brightness ? SALS_KBD_BL_ON : SALS_KBD_BL_OFF); | 
|  |  | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | priv->kbd_bl.last_brightness = brightness; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ideapad_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); | 
|  |  | 
|  | return ideapad_kbd_bl_brightness_set(priv, brightness); | 
|  | } | 
|  |  | 
|  | static void ideapad_kbd_bl_notify(struct ideapad_private *priv) | 
|  | { | 
|  | int brightness; | 
|  |  | 
|  | if (!priv->kbd_bl.initialized) | 
|  | return; | 
|  |  | 
|  | brightness = ideapad_kbd_bl_brightness_get(priv); | 
|  | if (brightness < 0) | 
|  | return; | 
|  |  | 
|  | if (brightness == priv->kbd_bl.last_brightness) | 
|  | return; | 
|  |  | 
|  | priv->kbd_bl.last_brightness = brightness; | 
|  |  | 
|  | led_classdev_notify_brightness_hw_changed(&priv->kbd_bl.led, brightness); | 
|  | } | 
|  |  | 
|  | static int ideapad_kbd_bl_init(struct ideapad_private *priv) | 
|  | { | 
|  | int brightness, err; | 
|  |  | 
|  | if (!priv->features.kbd_bl) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (WARN_ON(priv->kbd_bl.initialized)) | 
|  | return -EEXIST; | 
|  |  | 
|  | brightness = ideapad_kbd_bl_brightness_get(priv); | 
|  | if (brightness < 0) | 
|  | return brightness; | 
|  |  | 
|  | priv->kbd_bl.last_brightness = brightness; | 
|  |  | 
|  | priv->kbd_bl.led.name                    = "platform::" LED_FUNCTION_KBD_BACKLIGHT; | 
|  | priv->kbd_bl.led.max_brightness          = 1; | 
|  | priv->kbd_bl.led.brightness_get          = ideapad_kbd_bl_led_cdev_brightness_get; | 
|  | priv->kbd_bl.led.brightness_set_blocking = ideapad_kbd_bl_led_cdev_brightness_set; | 
|  | priv->kbd_bl.led.flags                   = LED_BRIGHT_HW_CHANGED; | 
|  |  | 
|  | err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | priv->kbd_bl.initialized = true; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ideapad_kbd_bl_exit(struct ideapad_private *priv) | 
|  | { | 
|  | if (!priv->kbd_bl.initialized) | 
|  | return; | 
|  |  | 
|  | priv->kbd_bl.initialized = false; | 
|  |  | 
|  | led_classdev_unregister(&priv->kbd_bl.led); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * module init/exit | 
|  | */ | 
|  | static void ideapad_sync_touchpad_state(struct ideapad_private *priv) | 
|  | { | 
|  | unsigned long value; | 
|  |  | 
|  | if (!priv->features.touchpad_ctrl_via_ec) | 
|  | return; | 
|  |  | 
|  | /* Without reading from EC touchpad LED doesn't switch state */ | 
|  | if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) { | 
|  | unsigned char param; | 
|  | /* | 
|  | * Some IdeaPads don't really turn off touchpad - they only | 
|  | * switch the LED state. We (de)activate KBC AUX port to turn | 
|  | * touchpad off and on. We send KEY_TOUCHPAD_OFF and | 
|  | * KEY_TOUCHPAD_ON to not to get out of sync with LED | 
|  | */ | 
|  | i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE); | 
|  | ideapad_input_report(priv, value ? 67 : 66); | 
|  | sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) | 
|  | { | 
|  | struct ideapad_private *priv = data; | 
|  | unsigned long vpc1, vpc2, bit; | 
|  |  | 
|  | if (read_ec_data(handle, VPCCMD_R_VPC1, &vpc1)) | 
|  | return; | 
|  |  | 
|  | if (read_ec_data(handle, VPCCMD_R_VPC2, &vpc2)) | 
|  | return; | 
|  |  | 
|  | vpc1 = (vpc2 << 8) | vpc1; | 
|  |  | 
|  | for_each_set_bit (bit, &vpc1, 16) { | 
|  | switch (bit) { | 
|  | case 13: | 
|  | case 11: | 
|  | case 8: | 
|  | case 7: | 
|  | case 6: | 
|  | ideapad_input_report(priv, bit); | 
|  | break; | 
|  | case 10: | 
|  | /* | 
|  | * This event gets send on a Yoga 300-11IBR when the EC | 
|  | * believes that the device has changed between laptop/ | 
|  | * tent/stand/tablet mode. The EC relies on getting | 
|  | * angle info from 2 accelerometers through a special | 
|  | * windows service calling a DSM on the DUAL250E ACPI- | 
|  | * device. Linux does not do this, making the laptop/ | 
|  | * tent/stand/tablet mode info unreliable, so we simply | 
|  | * ignore these events. | 
|  | */ | 
|  | break; | 
|  | case 9: | 
|  | ideapad_sync_rfk_state(priv); | 
|  | break; | 
|  | case 5: | 
|  | ideapad_sync_touchpad_state(priv); | 
|  | break; | 
|  | case 4: | 
|  | ideapad_backlight_notify_brightness(priv); | 
|  | break; | 
|  | case 3: | 
|  | ideapad_input_novokey(priv); | 
|  | break; | 
|  | case 2: | 
|  | ideapad_backlight_notify_power(priv); | 
|  | break; | 
|  | case 1: | 
|  | /* | 
|  | * Some IdeaPads report event 1 every ~20 | 
|  | * seconds while on battery power; some | 
|  | * report this when changing to/from tablet | 
|  | * mode; some report this when the keyboard | 
|  | * backlight has changed. | 
|  | */ | 
|  | ideapad_kbd_bl_notify(priv); | 
|  | break; | 
|  | case 0: | 
|  | ideapad_check_special_buttons(priv); | 
|  | break; | 
|  | default: | 
|  | dev_info(&priv->platform_device->dev, | 
|  | "Unknown event: %lu\n", bit); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_ACPI_WMI) | 
|  | static void ideapad_wmi_notify(u32 value, void *context) | 
|  | { | 
|  | struct ideapad_private *priv = context; | 
|  | unsigned long result; | 
|  |  | 
|  | switch (value) { | 
|  | case 128: | 
|  | ideapad_input_report(priv, value); | 
|  | break; | 
|  | case 208: | 
|  | if (!eval_hals(priv->adev->handle, &result)) { | 
|  | bool state = test_bit(HALS_FNLOCK_STATE_BIT, &result); | 
|  |  | 
|  | exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | dev_info(&priv->platform_device->dev, | 
|  | "Unknown WMI event: %u\n", value); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Some ideapads have a hardware rfkill switch, but most do not have one. | 
|  | * Reading VPCCMD_R_RF always results in 0 on models without a hardware rfkill, | 
|  | * switch causing ideapad_laptop to wrongly report all radios as hw-blocked. | 
|  | * There used to be a long list of DMI ids for models without a hw rfkill | 
|  | * switch here, but that resulted in playing whack a mole. | 
|  | * More importantly wrongly reporting the wifi radio as hw-blocked, results in | 
|  | * non working wifi. Whereas not reporting it hw-blocked, when it actually is | 
|  | * hw-blocked results in an empty SSID list, which is a much more benign | 
|  | * failure mode. | 
|  | * So the default now is the much safer option of assuming there is no | 
|  | * hardware rfkill switch. This default also actually matches most hardware, | 
|  | * since having a hw rfkill switch is quite rare on modern hardware, so this | 
|  | * also leads to a much shorter list. | 
|  | */ | 
|  | static const struct dmi_system_id hw_rfkill_list[] = { | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static void ideapad_check_features(struct ideapad_private *priv) | 
|  | { | 
|  | acpi_handle handle = priv->adev->handle; | 
|  | unsigned long val; | 
|  |  | 
|  | priv->features.hw_rfkill_switch = dmi_check_system(hw_rfkill_list); | 
|  |  | 
|  | /* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */ | 
|  | priv->features.touchpad_ctrl_via_ec = !acpi_dev_present("ELAN0634", NULL, -1); | 
|  |  | 
|  | if (!read_ec_data(handle, VPCCMD_R_FAN, &val)) | 
|  | priv->features.fan_mode = true; | 
|  |  | 
|  | if (acpi_has_method(handle, "GBMD") && acpi_has_method(handle, "SBMC")) | 
|  | priv->features.conservation_mode = true; | 
|  |  | 
|  | if (acpi_has_method(handle, "DYTC")) | 
|  | priv->features.dytc = true; | 
|  |  | 
|  | if (acpi_has_method(handle, "HALS") && acpi_has_method(handle, "SALS")) { | 
|  | if (!eval_hals(handle, &val)) { | 
|  | if (test_bit(HALS_FNLOCK_SUPPORT_BIT, &val)) | 
|  | priv->features.fn_lock = true; | 
|  |  | 
|  | if (test_bit(HALS_KBD_BL_SUPPORT_BIT, &val)) | 
|  | priv->features.kbd_bl = true; | 
|  |  | 
|  | if (test_bit(HALS_USB_CHARGING_SUPPORT_BIT, &val)) | 
|  | priv->features.usb_charging = true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ideapad_acpi_add(struct platform_device *pdev) | 
|  | { | 
|  | struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); | 
|  | struct ideapad_private *priv; | 
|  | acpi_status status; | 
|  | unsigned long cfg; | 
|  | int err, i; | 
|  |  | 
|  | if (!adev || eval_int(adev->handle, "_CFG", &cfg)) | 
|  | return -ENODEV; | 
|  |  | 
|  | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dev_set_drvdata(&pdev->dev, priv); | 
|  |  | 
|  | priv->cfg = cfg; | 
|  | priv->adev = adev; | 
|  | priv->platform_device = pdev; | 
|  |  | 
|  | ideapad_check_features(priv); | 
|  |  | 
|  | err = ideapad_sysfs_init(priv); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | ideapad_debugfs_init(priv); | 
|  |  | 
|  | err = ideapad_input_init(priv); | 
|  | if (err) | 
|  | goto input_failed; | 
|  |  | 
|  | err = ideapad_kbd_bl_init(priv); | 
|  | if (err) { | 
|  | if (err != -ENODEV) | 
|  | dev_warn(&pdev->dev, "Could not set up keyboard backlight LED: %d\n", err); | 
|  | else | 
|  | dev_info(&pdev->dev, "Keyboard backlight control not available\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * On some models without a hw-switch (the yoga 2 13 at least) | 
|  | * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work. | 
|  | */ | 
|  | if (!priv->features.hw_rfkill_switch) | 
|  | write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1); | 
|  |  | 
|  | /* The same for Touchpad */ | 
|  | if (!priv->features.touchpad_ctrl_via_ec) | 
|  | write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1); | 
|  |  | 
|  | for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) | 
|  | if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg)) | 
|  | ideapad_register_rfkill(priv, i); | 
|  |  | 
|  | ideapad_sync_rfk_state(priv); | 
|  | ideapad_sync_touchpad_state(priv); | 
|  |  | 
|  | err = ideapad_dytc_profile_init(priv); | 
|  | if (err) { | 
|  | if (err != -ENODEV) | 
|  | dev_warn(&pdev->dev, "Could not set up DYTC interface: %d\n", err); | 
|  | else | 
|  | dev_info(&pdev->dev, "DYTC interface is not available\n"); | 
|  | } | 
|  |  | 
|  | if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
|  | err = ideapad_backlight_init(priv); | 
|  | if (err && err != -ENODEV) | 
|  | goto backlight_failed; | 
|  | } | 
|  |  | 
|  | status = acpi_install_notify_handler(adev->handle, | 
|  | ACPI_DEVICE_NOTIFY, | 
|  | ideapad_acpi_notify, priv); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | err = -EIO; | 
|  | goto notification_failed; | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_ACPI_WMI) | 
|  | for (i = 0; i < ARRAY_SIZE(ideapad_wmi_fnesc_events); i++) { | 
|  | status = wmi_install_notify_handler(ideapad_wmi_fnesc_events[i], | 
|  | ideapad_wmi_notify, priv); | 
|  | if (ACPI_SUCCESS(status)) { | 
|  | priv->fnesc_guid = ideapad_wmi_fnesc_events[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ACPI_FAILURE(status) && status != AE_NOT_EXIST) { | 
|  | err = -EIO; | 
|  | goto notification_failed_wmi; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_ACPI_WMI) | 
|  | notification_failed_wmi: | 
|  | acpi_remove_notify_handler(priv->adev->handle, | 
|  | ACPI_DEVICE_NOTIFY, | 
|  | ideapad_acpi_notify); | 
|  | #endif | 
|  |  | 
|  | notification_failed: | 
|  | ideapad_backlight_exit(priv); | 
|  |  | 
|  | backlight_failed: | 
|  | ideapad_dytc_profile_exit(priv); | 
|  |  | 
|  | for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) | 
|  | ideapad_unregister_rfkill(priv, i); | 
|  |  | 
|  | ideapad_kbd_bl_exit(priv); | 
|  | ideapad_input_exit(priv); | 
|  |  | 
|  | input_failed: | 
|  | ideapad_debugfs_exit(priv); | 
|  | ideapad_sysfs_exit(priv); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ideapad_acpi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(&pdev->dev); | 
|  | int i; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_ACPI_WMI) | 
|  | if (priv->fnesc_guid) | 
|  | wmi_remove_notify_handler(priv->fnesc_guid); | 
|  | #endif | 
|  |  | 
|  | acpi_remove_notify_handler(priv->adev->handle, | 
|  | ACPI_DEVICE_NOTIFY, | 
|  | ideapad_acpi_notify); | 
|  |  | 
|  | ideapad_backlight_exit(priv); | 
|  | ideapad_dytc_profile_exit(priv); | 
|  |  | 
|  | for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) | 
|  | ideapad_unregister_rfkill(priv, i); | 
|  |  | 
|  | ideapad_kbd_bl_exit(priv); | 
|  | ideapad_input_exit(priv); | 
|  | ideapad_debugfs_exit(priv); | 
|  | ideapad_sysfs_exit(priv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int ideapad_acpi_resume(struct device *dev) | 
|  | { | 
|  | struct ideapad_private *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | ideapad_sync_rfk_state(priv); | 
|  | ideapad_sync_touchpad_state(priv); | 
|  |  | 
|  | if (priv->dytc) | 
|  | dytc_profile_refresh(priv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  | static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); | 
|  |  | 
|  | static const struct acpi_device_id ideapad_device_ids[] = { | 
|  | {"VPC2004", 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); | 
|  |  | 
|  | static struct platform_driver ideapad_acpi_driver = { | 
|  | .probe = ideapad_acpi_add, | 
|  | .remove = ideapad_acpi_remove, | 
|  | .driver = { | 
|  | .name   = "ideapad_acpi", | 
|  | .pm     = &ideapad_pm, | 
|  | .acpi_match_table = ACPI_PTR(ideapad_device_ids), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(ideapad_acpi_driver); | 
|  |  | 
|  | MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); | 
|  | MODULE_DESCRIPTION("IdeaPad ACPI Extras"); | 
|  | MODULE_LICENSE("GPL"); |