|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Watchdog driver for the K3 RTI module | 
|  | * | 
|  | * (c) Copyright 2019-2020 Texas Instruments Inc. | 
|  | * All rights reserved. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mod_devicetable.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/watchdog.h> | 
|  |  | 
|  | #define DEFAULT_HEARTBEAT 60 | 
|  |  | 
|  | /* Max heartbeat is calculated at 32kHz source clock */ | 
|  | #define MAX_HEARTBEAT	1000 | 
|  |  | 
|  | /* Timer register set definition */ | 
|  | #define RTIDWDCTRL	0x90 | 
|  | #define RTIDWDPRLD	0x94 | 
|  | #define RTIWDSTATUS	0x98 | 
|  | #define RTIWDKEY	0x9c | 
|  | #define RTIDWDCNTR	0xa0 | 
|  | #define RTIWWDRXCTRL	0xa4 | 
|  | #define RTIWWDSIZECTRL	0xa8 | 
|  |  | 
|  | #define RTIWWDRX_NMI	0xa | 
|  |  | 
|  | #define RTIWWDSIZE_50P		0x50 | 
|  | #define RTIWWDSIZE_25P		0x500 | 
|  | #define RTIWWDSIZE_12P5		0x5000 | 
|  | #define RTIWWDSIZE_6P25		0x50000 | 
|  | #define RTIWWDSIZE_3P125	0x500000 | 
|  |  | 
|  | #define WDENABLE_KEY	0xa98559da | 
|  |  | 
|  | #define WDKEY_SEQ0		0xe51a | 
|  | #define WDKEY_SEQ1		0xa35c | 
|  |  | 
|  | #define WDT_PRELOAD_SHIFT	13 | 
|  |  | 
|  | #define WDT_PRELOAD_MAX		0xfff | 
|  |  | 
|  | #define DWDST			BIT(1) | 
|  |  | 
|  | static int heartbeat = DEFAULT_HEARTBEAT; | 
|  |  | 
|  | /* | 
|  | * struct to hold data for each WDT device | 
|  | * @base - base io address of WD device | 
|  | * @freq - source clock frequency of WDT | 
|  | * @wdd  - hold watchdog device as is in WDT core | 
|  | */ | 
|  | struct rti_wdt_device { | 
|  | void __iomem		*base; | 
|  | unsigned long		freq; | 
|  | struct watchdog_device	wdd; | 
|  | }; | 
|  |  | 
|  | static int rti_wdt_start(struct watchdog_device *wdd) | 
|  | { | 
|  | u32 timer_margin; | 
|  | struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); | 
|  |  | 
|  | /* set timeout period */ | 
|  | timer_margin = (u64)wdd->timeout * wdt->freq; | 
|  | timer_margin >>= WDT_PRELOAD_SHIFT; | 
|  | if (timer_margin > WDT_PRELOAD_MAX) | 
|  | timer_margin = WDT_PRELOAD_MAX; | 
|  | writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD); | 
|  |  | 
|  | /* | 
|  | * RTI only supports a windowed mode, where the watchdog can only | 
|  | * be petted during the open window; not too early or not too late. | 
|  | * The HW configuration options only allow for the open window size | 
|  | * to be 50% or less than that; we obviouly want to configure the open | 
|  | * window as large as possible so we select the 50% option. | 
|  | */ | 
|  | wdd->min_hw_heartbeat_ms = 500 * wdd->timeout; | 
|  |  | 
|  | /* Generate NMI when wdt expires */ | 
|  | writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL); | 
|  |  | 
|  | /* Open window size 50%; this is the largest window size available */ | 
|  | writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL); | 
|  |  | 
|  | readl_relaxed(wdt->base + RTIWWDSIZECTRL); | 
|  |  | 
|  | /* enable watchdog */ | 
|  | writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rti_wdt_ping(struct watchdog_device *wdd) | 
|  | { | 
|  | struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); | 
|  |  | 
|  | /* put watchdog in service state */ | 
|  | writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY); | 
|  | /* put watchdog in active state */ | 
|  | writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize) | 
|  | { | 
|  | /* | 
|  | * RTI only supports a windowed mode, where the watchdog can only | 
|  | * be petted during the open window; not too early or not too late. | 
|  | * The HW configuration options only allow for the open window size | 
|  | * to be 50% or less than that. | 
|  | */ | 
|  | switch (wsize) { | 
|  | case RTIWWDSIZE_50P: | 
|  | /* 50% open window => 50% min heartbeat */ | 
|  | wdd->min_hw_heartbeat_ms = 500 * heartbeat; | 
|  | break; | 
|  |  | 
|  | case RTIWWDSIZE_25P: | 
|  | /* 25% open window => 75% min heartbeat */ | 
|  | wdd->min_hw_heartbeat_ms = 750 * heartbeat; | 
|  | break; | 
|  |  | 
|  | case RTIWWDSIZE_12P5: | 
|  | /* 12.5% open window => 87.5% min heartbeat */ | 
|  | wdd->min_hw_heartbeat_ms = 875 * heartbeat; | 
|  | break; | 
|  |  | 
|  | case RTIWWDSIZE_6P25: | 
|  | /* 6.5% open window => 93.5% min heartbeat */ | 
|  | wdd->min_hw_heartbeat_ms = 935 * heartbeat; | 
|  | break; | 
|  |  | 
|  | case RTIWWDSIZE_3P125: | 
|  | /* 3.125% open window => 96.9% min heartbeat */ | 
|  | wdd->min_hw_heartbeat_ms = 969 * heartbeat; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd) | 
|  | { | 
|  | u64 timer_counter; | 
|  | u32 val; | 
|  | struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); | 
|  |  | 
|  | /* if timeout has occurred then return 0 */ | 
|  | val = readl_relaxed(wdt->base + RTIWDSTATUS); | 
|  | if (val & DWDST) | 
|  | return 0; | 
|  |  | 
|  | timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR); | 
|  |  | 
|  | timer_counter *= 1000; | 
|  |  | 
|  | do_div(timer_counter, wdt->freq); | 
|  |  | 
|  | return timer_counter; | 
|  | } | 
|  |  | 
|  | static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd) | 
|  | { | 
|  | return rti_wdt_get_timeleft_ms(wdd) / 1000; | 
|  | } | 
|  |  | 
|  | static const struct watchdog_info rti_wdt_info = { | 
|  | .options = WDIOF_KEEPALIVEPING, | 
|  | .identity = "K3 RTI Watchdog", | 
|  | }; | 
|  |  | 
|  | static const struct watchdog_ops rti_wdt_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .start		= rti_wdt_start, | 
|  | .ping		= rti_wdt_ping, | 
|  | .get_timeleft	= rti_wdt_get_timeleft, | 
|  | }; | 
|  |  | 
|  | static int rti_wdt_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct watchdog_device *wdd; | 
|  | struct rti_wdt_device *wdt; | 
|  | struct clk *clk; | 
|  | u32 last_ping = 0; | 
|  |  | 
|  | wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); | 
|  | if (!wdt) | 
|  | return -ENOMEM; | 
|  |  | 
|  | clk = clk_get(dev, NULL); | 
|  | if (IS_ERR(clk)) | 
|  | return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); | 
|  |  | 
|  | wdt->freq = clk_get_rate(clk); | 
|  |  | 
|  | clk_put(clk); | 
|  |  | 
|  | if (!wdt->freq) { | 
|  | dev_err(dev, "Failed to get fck rate.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If watchdog is running at 32k clock, it is not accurate. | 
|  | * Adjust frequency down in this case so that we don't pet | 
|  | * the watchdog too often. | 
|  | */ | 
|  | if (wdt->freq < 32768) | 
|  | wdt->freq = wdt->freq * 9 / 10; | 
|  |  | 
|  | pm_runtime_enable(dev); | 
|  | ret = pm_runtime_get_sync(dev); | 
|  | if (ret) { | 
|  | pm_runtime_put_noidle(dev); | 
|  | return dev_err_probe(dev, ret, "runtime pm failed\n"); | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, wdt); | 
|  |  | 
|  | wdd = &wdt->wdd; | 
|  | wdd->info = &rti_wdt_info; | 
|  | wdd->ops = &rti_wdt_ops; | 
|  | wdd->min_timeout = 1; | 
|  | wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) / | 
|  | wdt->freq * 1000; | 
|  | wdd->parent = dev; | 
|  |  | 
|  | watchdog_set_drvdata(wdd, wdt); | 
|  | watchdog_set_nowayout(wdd, 1); | 
|  | watchdog_set_restart_priority(wdd, 128); | 
|  |  | 
|  | wdt->base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(wdt->base)) { | 
|  | ret = PTR_ERR(wdt->base); | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) { | 
|  | u32 time_left_ms; | 
|  | u64 heartbeat_ms; | 
|  | u32 wsize; | 
|  |  | 
|  | set_bit(WDOG_HW_RUNNING, &wdd->status); | 
|  | time_left_ms = rti_wdt_get_timeleft_ms(wdd); | 
|  | heartbeat_ms = readl(wdt->base + RTIDWDPRLD); | 
|  | heartbeat_ms <<= WDT_PRELOAD_SHIFT; | 
|  | heartbeat_ms *= 1000; | 
|  | do_div(heartbeat_ms, wdt->freq); | 
|  | if (heartbeat_ms != heartbeat * 1000) | 
|  | dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n"); | 
|  |  | 
|  | heartbeat = heartbeat_ms; | 
|  | heartbeat /= 1000; | 
|  |  | 
|  | wsize = readl(wdt->base + RTIWWDSIZECTRL); | 
|  | ret = rti_wdt_setup_hw_hb(wdd, wsize); | 
|  | if (ret) { | 
|  | dev_err(dev, "bad window size.\n"); | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | last_ping = heartbeat_ms - time_left_ms; | 
|  | if (time_left_ms > heartbeat_ms) { | 
|  | dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n"); | 
|  | last_ping = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | watchdog_init_timeout(wdd, heartbeat, dev); | 
|  |  | 
|  | ret = watchdog_register_device(wdd); | 
|  | if (ret) { | 
|  | dev_err(dev, "cannot register watchdog device\n"); | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | if (last_ping) | 
|  | watchdog_set_last_hw_keepalive(wdd, last_ping); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_iomap: | 
|  | pm_runtime_put_sync(&pdev->dev); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int rti_wdt_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct rti_wdt_device *wdt = platform_get_drvdata(pdev); | 
|  |  | 
|  | watchdog_unregister_device(&wdt->wdd); | 
|  | pm_runtime_put(&pdev->dev); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id rti_wdt_of_match[] = { | 
|  | { .compatible = "ti,j7-rti-wdt", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, rti_wdt_of_match); | 
|  |  | 
|  | static struct platform_driver rti_wdt_driver = { | 
|  | .driver = { | 
|  | .name = "rti-wdt", | 
|  | .of_match_table = rti_wdt_of_match, | 
|  | }, | 
|  | .probe = rti_wdt_probe, | 
|  | .remove = rti_wdt_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(rti_wdt_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>"); | 
|  | MODULE_DESCRIPTION("K3 RTI Watchdog Driver"); | 
|  |  | 
|  | module_param(heartbeat, int, 0); | 
|  | MODULE_PARM_DESC(heartbeat, | 
|  | "Watchdog heartbeat period in seconds from 1 to " | 
|  | __MODULE_STRING(MAX_HEARTBEAT) ", default " | 
|  | __MODULE_STRING(DEFAULT_HEARTBEAT)); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:rti-wdt"); |