| // SPDX-License-Identifier: GPL-2.0 | 
 | // | 
 | // tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver | 
 | // | 
 | // Copyright (c) 2005,2006 Mauro Carvalho Chehab <mchehab@kernel.org> | 
 |  | 
 | #include <dt-bindings/media/tvp5150.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/videodev2.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of_graph.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/regmap.h> | 
 | #include <media/v4l2-async.h> | 
 | #include <media/v4l2-device.h> | 
 | #include <media/v4l2-event.h> | 
 | #include <media/v4l2-ctrls.h> | 
 | #include <media/v4l2-fwnode.h> | 
 | #include <media/v4l2-mc.h> | 
 | #include <media/v4l2-rect.h> | 
 |  | 
 | #include "tvp5150_reg.h" | 
 |  | 
 | #define TVP5150_H_MAX		720U | 
 | #define TVP5150_V_MAX_525_60	480U | 
 | #define TVP5150_V_MAX_OTHERS	576U | 
 | #define TVP5150_MAX_CROP_LEFT	511 | 
 | #define TVP5150_MAX_CROP_TOP	127 | 
 | #define TVP5150_CROP_SHIFT	2 | 
 | #define TVP5150_MBUS_FMT	MEDIA_BUS_FMT_UYVY8_2X8 | 
 | #define TVP5150_FIELD		V4L2_FIELD_ALTERNATE | 
 | #define TVP5150_COLORSPACE	V4L2_COLORSPACE_SMPTE170M | 
 | #define TVP5150_STD_MASK	(V4L2_STD_NTSC     | \ | 
 | 				 V4L2_STD_NTSC_443 | \ | 
 | 				 V4L2_STD_PAL      | \ | 
 | 				 V4L2_STD_PAL_M    | \ | 
 | 				 V4L2_STD_PAL_N    | \ | 
 | 				 V4L2_STD_PAL_Nc   | \ | 
 | 				 V4L2_STD_SECAM) | 
 |  | 
 | #define TVP5150_MAX_CONNECTORS	3 /* Check dt-bindings for more information */ | 
 |  | 
 | MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver"); | 
 | MODULE_AUTHOR("Mauro Carvalho Chehab"); | 
 | MODULE_LICENSE("GPL v2"); | 
 |  | 
 |  | 
 | static int debug; | 
 | module_param(debug, int, 0644); | 
 | MODULE_PARM_DESC(debug, "Debug level (0-2)"); | 
 |  | 
 | #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg) | 
 |  | 
 | enum tvp5150_pads { | 
 | 	TVP5150_PAD_AIP1A, | 
 | 	TVP5150_PAD_AIP1B, | 
 | 	TVP5150_PAD_VID_OUT, | 
 | 	TVP5150_NUM_PADS | 
 | }; | 
 |  | 
 | struct tvp5150_connector { | 
 | 	struct v4l2_fwnode_connector base; | 
 | 	struct media_entity ent; | 
 | 	struct media_pad pad; | 
 | }; | 
 |  | 
 | struct tvp5150 { | 
 | 	struct v4l2_subdev sd; | 
 |  | 
 | 	struct media_pad pads[TVP5150_NUM_PADS]; | 
 | 	struct tvp5150_connector connectors[TVP5150_MAX_CONNECTORS]; | 
 | 	struct tvp5150_connector *cur_connector; | 
 | 	unsigned int connectors_num; | 
 |  | 
 | 	struct v4l2_ctrl_handler hdl; | 
 | 	struct v4l2_rect rect; | 
 | 	struct regmap *regmap; | 
 | 	int irq; | 
 |  | 
 | 	v4l2_std_id norm;	/* Current set standard */ | 
 | 	v4l2_std_id detected_norm; | 
 | 	u32 input; | 
 | 	u32 output; | 
 | 	u32 oe; | 
 | 	int enable; | 
 | 	bool lock; | 
 |  | 
 | 	u16 dev_id; | 
 | 	u16 rom_ver; | 
 |  | 
 | 	enum v4l2_mbus_type mbus_type; | 
 | }; | 
 |  | 
 | static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) | 
 | { | 
 | 	return container_of(sd, struct tvp5150, sd); | 
 | } | 
 |  | 
 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | 
 | { | 
 | 	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd; | 
 | } | 
 |  | 
 | static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	int ret, val; | 
 |  | 
 | 	ret = regmap_read(decoder->regmap, addr, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init, | 
 | 				const u8 end, int max_line) | 
 | { | 
 | 	u8 buf[16]; | 
 | 	int i = 0, j, len; | 
 |  | 
 | 	if (max_line > 16) { | 
 | 		dprintk0(sd->dev, "too much data to dump\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	for (i = init; i < end; i += max_line) { | 
 | 		len = (end - i > max_line) ? max_line : end - i; | 
 |  | 
 | 		for (j = 0; j < len; j++) | 
 | 			buf[j] = tvp5150_read(sd, i + j); | 
 |  | 
 | 		dprintk0(sd->dev, "%s reg %02x = %*ph\n", s, i, len, buf); | 
 | 	} | 
 | } | 
 |  | 
 | static int tvp5150_log_status(struct v4l2_subdev *sd) | 
 | { | 
 | 	dprintk0(sd->dev, "tvp5150: Video input source selection #1 = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1)); | 
 | 	dprintk0(sd->dev, "tvp5150: Analog channel controls = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_ANAL_CHL_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Operation mode controls = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_OP_MODE_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Miscellaneous controls = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_MISC_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Autoswitch mask= 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_AUTOSW_MSK)); | 
 | 	dprintk0(sd->dev, "tvp5150: Color killer threshold control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n", | 
 | 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1), | 
 | 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2), | 
 | 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3)); | 
 | 	dprintk0(sd->dev, "tvp5150: Brightness control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_BRIGHT_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Color saturation control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_SATURATION_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Hue control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_HUE_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Contrast control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_CONTRAST_CTL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Outputs and data rates select = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_DATA_RATE_SEL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Configuration shared pins = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_CONF_SHARED_PIN)); | 
 | 	dprintk0(sd->dev, "tvp5150: Active video cropping start = 0x%02x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB), | 
 | 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB)); | 
 | 	dprintk0(sd->dev, "tvp5150: Active video cropping stop  = 0x%02x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB), | 
 | 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB)); | 
 | 	dprintk0(sd->dev, "tvp5150: Genlock/RTC = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_GENLOCK)); | 
 | 	dprintk0(sd->dev, "tvp5150: Horizontal sync start = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_HORIZ_SYNC_START)); | 
 | 	dprintk0(sd->dev, "tvp5150: Vertical blanking start = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VERT_BLANKING_START)); | 
 | 	dprintk0(sd->dev, "tvp5150: Vertical blanking stop = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP)); | 
 | 	dprintk0(sd->dev, "tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n", | 
 | 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1), | 
 | 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt reset register B = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_RESET_REG_B)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt enable register B = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt configuration register B = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B)); | 
 | 	dprintk0(sd->dev, "tvp5150: Video standard = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VIDEO_STD)); | 
 | 	dprintk0(sd->dev, "tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_CB_GAIN_FACT), | 
 | 		tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR)); | 
 | 	dprintk0(sd->dev, "tvp5150: Macrovision on counter = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR)); | 
 | 	dprintk0(sd->dev, "tvp5150: Macrovision off counter = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR)); | 
 | 	dprintk0(sd->dev, "tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n", | 
 | 		(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4); | 
 | 	dprintk0(sd->dev, "tvp5150: Device ID = %02x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_MSB_DEV_ID), | 
 | 		tvp5150_read(sd, TVP5150_LSB_DEV_ID)); | 
 | 	dprintk0(sd->dev, "tvp5150: ROM version = (hex) %02x.%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_ROM_MAJOR_VER), | 
 | 		tvp5150_read(sd, TVP5150_ROM_MINOR_VER)); | 
 | 	dprintk0(sd->dev, "tvp5150: Vertical line count = 0x%02x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB), | 
 | 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt status register B = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_B)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt active register B = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B)); | 
 | 	dprintk0(sd->dev, "tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n", | 
 | 		tvp5150_read(sd, TVP5150_STATUS_REG_1), | 
 | 		tvp5150_read(sd, TVP5150_STATUS_REG_2), | 
 | 		tvp5150_read(sd, TVP5150_STATUS_REG_3), | 
 | 		tvp5150_read(sd, TVP5150_STATUS_REG_4), | 
 | 		tvp5150_read(sd, TVP5150_STATUS_REG_5)); | 
 |  | 
 | 	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI, | 
 | 			TVP5150_TELETEXT_FIL1_END, 8); | 
 | 	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI, | 
 | 			TVP5150_TELETEXT_FIL2_END, 8); | 
 |  | 
 | 	dprintk0(sd->dev, "tvp5150: Teletext filter enable = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt status register A = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_A)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt enable register A = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A)); | 
 | 	dprintk0(sd->dev, "tvp5150: Interrupt configuration = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_INT_CONF)); | 
 | 	dprintk0(sd->dev, "tvp5150: VDP status register = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_VDP_STATUS_REG)); | 
 | 	dprintk0(sd->dev, "tvp5150: FIFO word count = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT)); | 
 | 	dprintk0(sd->dev, "tvp5150: FIFO interrupt threshold = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD)); | 
 | 	dprintk0(sd->dev, "tvp5150: FIFO reset = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FIFO_RESET)); | 
 | 	dprintk0(sd->dev, "tvp5150: Line number interrupt = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_LINE_NUMBER_INT)); | 
 | 	dprintk0(sd->dev, "tvp5150: Pixel alignment register = 0x%02x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH), | 
 | 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW)); | 
 | 	dprintk0(sd->dev, "tvp5150: FIFO output control = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL)); | 
 | 	dprintk0(sd->dev, "tvp5150: Full field enable = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FULL_FIELD_ENA)); | 
 | 	dprintk0(sd->dev, "tvp5150: Full field mode register = 0x%02x\n", | 
 | 		tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG)); | 
 |  | 
 | 	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI, | 
 | 			TVP5150_CC_DATA_END, 8); | 
 |  | 
 | 	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI, | 
 | 			TVP5150_WSS_DATA_END, 8); | 
 |  | 
 | 	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI, | 
 | 			TVP5150_VPS_DATA_END, 8); | 
 |  | 
 | 	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI, | 
 | 			TVP5150_VITC_DATA_END, 10); | 
 |  | 
 | 	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI, | 
 | 			TVP5150_LINE_MODE_END, 8); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /**************************************************************************** | 
 | 			Basic functions | 
 |  ****************************************************************************/ | 
 |  | 
 | static void tvp5150_selmux(struct v4l2_subdev *sd) | 
 | { | 
 | 	int opmode = 0; | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	unsigned int mask, val; | 
 | 	int input = 0; | 
 |  | 
 | 	/* Only tvp5150am1 and tvp5151 have signal generator support */ | 
 | 	if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) || | 
 | 	    (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) { | 
 | 		if (!decoder->enable) | 
 | 			input = 8; | 
 | 	} | 
 |  | 
 | 	switch (decoder->input) { | 
 | 	case TVP5150_COMPOSITE1: | 
 | 		input |= 2; | 
 | 		fallthrough; | 
 | 	case TVP5150_COMPOSITE0: | 
 | 		break; | 
 | 	case TVP5150_SVIDEO: | 
 | 	default: | 
 | 		input |= 1; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, | 
 | 		    "Selecting video route: route input=%s, output=%s => tvp5150 input=0x%02x, opmode=0x%02x\n", | 
 | 		    decoder->input == 0 ? "aip1a" : | 
 | 		    decoder->input == 2 ? "aip1b" : "svideo", | 
 | 		    decoder->output == 0 ? "normal" : "black-frame-gen", | 
 | 		    input, opmode); | 
 |  | 
 | 	regmap_write(decoder->regmap, TVP5150_OP_MODE_CTL, opmode); | 
 | 	regmap_write(decoder->regmap, TVP5150_VD_IN_SRC_SEL_1, input); | 
 |  | 
 | 	/* | 
 | 	 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For | 
 | 	 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK | 
 | 	 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the | 
 | 	 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set | 
 | 	 * INTREQ/GPCL/VBLK to logic 1. | 
 | 	 */ | 
 | 	mask = TVP5150_MISC_CTL_GPCL | TVP5150_MISC_CTL_HVLK; | 
 | 	if (decoder->input == TVP5150_SVIDEO) | 
 | 		val = TVP5150_MISC_CTL_HVLK; | 
 | 	else | 
 | 		val = TVP5150_MISC_CTL_GPCL; | 
 | 	regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val); | 
 | }; | 
 |  | 
 | struct i2c_reg_value { | 
 | 	unsigned char reg; | 
 | 	unsigned char value; | 
 | }; | 
 |  | 
 | /* Default values as sugested at TVP5150AM1 datasheet */ | 
 | static const struct i2c_reg_value tvp5150_init_default[] = { | 
 | 	{ /* 0x00 */ | 
 | 		TVP5150_VD_IN_SRC_SEL_1, 0x00 | 
 | 	}, | 
 | 	{ /* 0x01 */ | 
 | 		TVP5150_ANAL_CHL_CTL, 0x15 | 
 | 	}, | 
 | 	{ /* 0x02 */ | 
 | 		TVP5150_OP_MODE_CTL, 0x00 | 
 | 	}, | 
 | 	{ /* 0x03 */ | 
 | 		TVP5150_MISC_CTL, 0x01 | 
 | 	}, | 
 | 	{ /* 0x06 */ | 
 | 		TVP5150_COLOR_KIL_THSH_CTL, 0x10 | 
 | 	}, | 
 | 	{ /* 0x07 */ | 
 | 		TVP5150_LUMA_PROC_CTL_1, 0x60 | 
 | 	}, | 
 | 	{ /* 0x08 */ | 
 | 		TVP5150_LUMA_PROC_CTL_2, 0x00 | 
 | 	}, | 
 | 	{ /* 0x09 */ | 
 | 		TVP5150_BRIGHT_CTL, 0x80 | 
 | 	}, | 
 | 	{ /* 0x0a */ | 
 | 		TVP5150_SATURATION_CTL, 0x80 | 
 | 	}, | 
 | 	{ /* 0x0b */ | 
 | 		TVP5150_HUE_CTL, 0x00 | 
 | 	}, | 
 | 	{ /* 0x0c */ | 
 | 		TVP5150_CONTRAST_CTL, 0x80 | 
 | 	}, | 
 | 	{ /* 0x0d */ | 
 | 		TVP5150_DATA_RATE_SEL, 0x47 | 
 | 	}, | 
 | 	{ /* 0x0e */ | 
 | 		TVP5150_LUMA_PROC_CTL_3, 0x00 | 
 | 	}, | 
 | 	{ /* 0x0f */ | 
 | 		TVP5150_CONF_SHARED_PIN, 0x08 | 
 | 	}, | 
 | 	{ /* 0x11 */ | 
 | 		TVP5150_ACT_VD_CROP_ST_MSB, 0x00 | 
 | 	}, | 
 | 	{ /* 0x12 */ | 
 | 		TVP5150_ACT_VD_CROP_ST_LSB, 0x00 | 
 | 	}, | 
 | 	{ /* 0x13 */ | 
 | 		TVP5150_ACT_VD_CROP_STP_MSB, 0x00 | 
 | 	}, | 
 | 	{ /* 0x14 */ | 
 | 		TVP5150_ACT_VD_CROP_STP_LSB, 0x00 | 
 | 	}, | 
 | 	{ /* 0x15 */ | 
 | 		TVP5150_GENLOCK, 0x01 | 
 | 	}, | 
 | 	{ /* 0x16 */ | 
 | 		TVP5150_HORIZ_SYNC_START, 0x80 | 
 | 	}, | 
 | 	{ /* 0x18 */ | 
 | 		TVP5150_VERT_BLANKING_START, 0x00 | 
 | 	}, | 
 | 	{ /* 0x19 */ | 
 | 		TVP5150_VERT_BLANKING_STOP, 0x00 | 
 | 	}, | 
 | 	{ /* 0x1a */ | 
 | 		TVP5150_CHROMA_PROC_CTL_1, 0x0c | 
 | 	}, | 
 | 	{ /* 0x1b */ | 
 | 		TVP5150_CHROMA_PROC_CTL_2, 0x14 | 
 | 	}, | 
 | 	{ /* 0x1c */ | 
 | 		TVP5150_INT_RESET_REG_B, 0x00 | 
 | 	}, | 
 | 	{ /* 0x1d */ | 
 | 		TVP5150_INT_ENABLE_REG_B, 0x00 | 
 | 	}, | 
 | 	{ /* 0x1e */ | 
 | 		TVP5150_INTT_CONFIG_REG_B, 0x00 | 
 | 	}, | 
 | 	{ /* 0x28 */ | 
 | 		TVP5150_VIDEO_STD, 0x00 | 
 | 	}, | 
 | 	{ /* 0x2e */ | 
 | 		TVP5150_MACROVISION_ON_CTR, 0x0f | 
 | 	}, | 
 | 	{ /* 0x2f */ | 
 | 		TVP5150_MACROVISION_OFF_CTR, 0x01 | 
 | 	}, | 
 | 	{ /* 0xbb */ | 
 | 		TVP5150_TELETEXT_FIL_ENA, 0x00 | 
 | 	}, | 
 | 	{ /* 0xc0 */ | 
 | 		TVP5150_INT_STATUS_REG_A, 0x00 | 
 | 	}, | 
 | 	{ /* 0xc1 */ | 
 | 		TVP5150_INT_ENABLE_REG_A, 0x00 | 
 | 	}, | 
 | 	{ /* 0xc2 */ | 
 | 		TVP5150_INT_CONF, 0x04 | 
 | 	}, | 
 | 	{ /* 0xc8 */ | 
 | 		TVP5150_FIFO_INT_THRESHOLD, 0x80 | 
 | 	}, | 
 | 	{ /* 0xc9 */ | 
 | 		TVP5150_FIFO_RESET, 0x00 | 
 | 	}, | 
 | 	{ /* 0xca */ | 
 | 		TVP5150_LINE_NUMBER_INT, 0x00 | 
 | 	}, | 
 | 	{ /* 0xcb */ | 
 | 		TVP5150_PIX_ALIGN_REG_LOW, 0x4e | 
 | 	}, | 
 | 	{ /* 0xcc */ | 
 | 		TVP5150_PIX_ALIGN_REG_HIGH, 0x00 | 
 | 	}, | 
 | 	{ /* 0xcd */ | 
 | 		TVP5150_FIFO_OUT_CTRL, 0x01 | 
 | 	}, | 
 | 	{ /* 0xcf */ | 
 | 		TVP5150_FULL_FIELD_ENA, 0x00 | 
 | 	}, | 
 | 	{ /* 0xd0 */ | 
 | 		TVP5150_LINE_MODE_INI, 0x00 | 
 | 	}, | 
 | 	{ /* 0xfc */ | 
 | 		TVP5150_FULL_FIELD_MODE_REG, 0x7f | 
 | 	}, | 
 | 	{ /* end of data */ | 
 | 		0xff, 0xff | 
 | 	} | 
 | }; | 
 |  | 
 | /* Default values as sugested at TVP5150AM1 datasheet */ | 
 | static const struct i2c_reg_value tvp5150_init_enable[] = { | 
 | 	{	/* Automatic offset and AGC enabled */ | 
 | 		TVP5150_ANAL_CHL_CTL, 0x15 | 
 | 	}, {	/* Activate YCrCb output 0x9 or 0xd ? */ | 
 | 		TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL | | 
 | 				  TVP5150_MISC_CTL_INTREQ_OE | | 
 | 				  TVP5150_MISC_CTL_YCBCR_OE | | 
 | 				  TVP5150_MISC_CTL_SYNC_OE | | 
 | 				  TVP5150_MISC_CTL_VBLANK | | 
 | 				  TVP5150_MISC_CTL_CLOCK_OE, | 
 | 	}, {	/* Activates video std autodetection for all standards */ | 
 | 		TVP5150_AUTOSW_MSK, 0x0 | 
 | 	}, {	/* Default format: 0x47. For 4:2:2: 0x40 */ | 
 | 		TVP5150_DATA_RATE_SEL, 0x47 | 
 | 	}, { | 
 | 		TVP5150_CHROMA_PROC_CTL_1, 0x0c | 
 | 	}, { | 
 | 		TVP5150_CHROMA_PROC_CTL_2, 0x54 | 
 | 	}, {	/* Non documented, but initialized on WinTV USB2 */ | 
 | 		0x27, 0x20 | 
 | 	}, { | 
 | 		0xff, 0xff | 
 | 	} | 
 | }; | 
 |  | 
 | struct tvp5150_vbi_type { | 
 | 	unsigned int vbi_type; | 
 | 	unsigned int ini_line; | 
 | 	unsigned int end_line; | 
 | 	unsigned int by_field :1; | 
 | }; | 
 |  | 
 | struct i2c_vbi_ram_value { | 
 | 	u16 reg; | 
 | 	struct tvp5150_vbi_type type; | 
 | 	unsigned char values[16]; | 
 | }; | 
 |  | 
 | /* This struct have the values for each supported VBI Standard | 
 |  * by | 
 |  tvp5150_vbi_types should follow the same order as vbi_ram_default | 
 |  * value 0 means rom position 0x10, value 1 means rom position 0x30 | 
 |  * and so on. There are 16 possible locations from 0 to 15. | 
 |  */ | 
 |  | 
 | static struct i2c_vbi_ram_value vbi_ram_default[] = { | 
 |  | 
 | 	/* | 
 | 	 * FIXME: Current api doesn't handle all VBI types, those not | 
 | 	 * yet supported are placed under #if 0 | 
 | 	 */ | 
 | #if 0 | 
 | 	[0] = {0x010, /* Teletext, SECAM, WST System A */ | 
 | 		{V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26, | 
 | 		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 } | 
 | 	}, | 
 | #endif | 
 | 	[1] = {0x030, /* Teletext, PAL, WST System B */ | 
 | 		{V4L2_SLICED_TELETEXT_B, 6, 22, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b, | 
 | 		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 } | 
 | 	}, | 
 | #if 0 | 
 | 	[2] = {0x050, /* Teletext, PAL, WST System C */ | 
 | 		{V4L2_SLICED_TELETEXT_PAL_C, 6, 22, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, | 
 | 		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } | 
 | 	}, | 
 | 	[3] = {0x070, /* Teletext, NTSC, WST System B */ | 
 | 		{V4L2_SLICED_TELETEXT_NTSC_B, 10, 21, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23, | 
 | 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } | 
 | 	}, | 
 | 	[4] = {0x090, /* Tetetext, NTSC NABTS System C */ | 
 | 		{V4L2_SLICED_TELETEXT_NTSC_C, 10, 21, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, | 
 | 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 } | 
 | 	}, | 
 | 	[5] = {0x0b0, /* Teletext, NTSC-J, NABTS System D */ | 
 | 		{V4L2_SLICED_TELETEXT_NTSC_D, 10, 21, 1}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23, | 
 | 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } | 
 | 	}, | 
 | 	[6] = {0x0d0, /* Closed Caption, PAL/SECAM */ | 
 | 		{V4L2_SLICED_CAPTION_625, 22, 22, 1}, | 
 | 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, | 
 | 		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } | 
 | 	}, | 
 | #endif | 
 | 	[7] = {0x0f0, /* Closed Caption, NTSC */ | 
 | 		{V4L2_SLICED_CAPTION_525, 21, 21, 1}, | 
 | 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, | 
 | 		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } | 
 | 	}, | 
 | 	[8] = {0x110, /* Wide Screen Signal, PAL/SECAM */ | 
 | 		{V4L2_SLICED_WSS_625, 23, 23, 1}, | 
 | 		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, | 
 | 		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } | 
 | 	}, | 
 | #if 0 | 
 | 	[9] = {0x130, /* Wide Screen Signal, NTSC C */ | 
 | 		{V4L2_SLICED_WSS_525, 20, 20, 1}, | 
 | 		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43, | 
 | 		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 } | 
 | 	}, | 
 | 	[10] = {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */ | 
 | 		{V4l2_SLICED_VITC_625, 6, 22, 0}, | 
 | 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, | 
 | 		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } | 
 | 	}, | 
 | 	[11] = {0x170, /* Vertical Interval Timecode (VITC), NTSC */ | 
 | 		{V4l2_SLICED_VITC_525, 10, 20, 0}, | 
 | 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, | 
 | 		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } | 
 | 	}, | 
 | #endif | 
 | 	[12] = {0x190, /* Video Program System (VPS), PAL */ | 
 | 		{V4L2_SLICED_VPS, 16, 16, 0}, | 
 | 		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d, | 
 | 		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 } | 
 | 	}, | 
 | 	/* 0x1d0 User programmable */ | 
 | }; | 
 |  | 
 | static int tvp5150_write_inittab(struct v4l2_subdev *sd, | 
 | 				const struct i2c_reg_value *regs) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	while (regs->reg != 0xff) { | 
 | 		regmap_write(decoder->regmap, regs->reg, regs->value); | 
 | 		regs++; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_vdp_init(struct v4l2_subdev *sd) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	struct regmap *map = decoder->regmap; | 
 | 	unsigned int i; | 
 | 	int j; | 
 |  | 
 | 	/* Disable Full Field */ | 
 | 	regmap_write(map, TVP5150_FULL_FIELD_ENA, 0); | 
 |  | 
 | 	/* Before programming, Line mode should be at 0xff */ | 
 | 	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) | 
 | 		regmap_write(map, i, 0xff); | 
 |  | 
 | 	/* Load Ram Table */ | 
 | 	for (j = 0; j < ARRAY_SIZE(vbi_ram_default); j++) { | 
 | 		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[j]; | 
 |  | 
 | 		if (!regs->type.vbi_type) | 
 | 			continue; | 
 |  | 
 | 		regmap_write(map, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8); | 
 | 		regmap_write(map, TVP5150_CONF_RAM_ADDR_LOW, regs->reg); | 
 |  | 
 | 		for (i = 0; i < 16; i++) | 
 | 			regmap_write(map, TVP5150_VDP_CONF_RAM_DATA, | 
 | 				     regs->values[i]); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Fills VBI capabilities based on i2c_vbi_ram_value struct */ | 
 | static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd, | 
 | 				struct v4l2_sliced_vbi_cap *cap) | 
 | { | 
 | 	int line, i; | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n"); | 
 | 	memset(cap, 0, sizeof(*cap)); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) { | 
 | 		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i]; | 
 |  | 
 | 		if (!regs->type.vbi_type) | 
 | 			continue; | 
 |  | 
 | 		for (line = regs->type.ini_line; | 
 | 		     line <= regs->type.end_line; | 
 | 		     line++) { | 
 | 			cap->service_lines[0][line] |= regs->type.vbi_type; | 
 | 		} | 
 | 		cap->service_set |= regs->type.vbi_type; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Set vbi processing | 
 |  * type - one of tvp5150_vbi_types | 
 |  * line - line to gather data | 
 |  * fields: bit 0 field1, bit 1, field2 | 
 |  * flags (default=0xf0) is a bitmask, were set means: | 
 |  *	bit 7: enable filtering null bytes on CC | 
 |  *	bit 6: send data also to FIFO | 
 |  *	bit 5: don't allow data with errors on FIFO | 
 |  *	bit 4: enable ECC when possible | 
 |  * pix_align = pix alignment: | 
 |  *	LSB = field1 | 
 |  *	MSB = field2 | 
 |  */ | 
 | static int tvp5150_set_vbi(struct v4l2_subdev *sd, | 
 | 			unsigned int type, u8 flags, int line, | 
 | 			const int fields) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	v4l2_std_id std = decoder->norm; | 
 | 	u8 reg; | 
 | 	int i, pos = 0; | 
 |  | 
 | 	if (std == V4L2_STD_ALL) { | 
 | 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n"); | 
 | 		return 0; | 
 | 	} else if (std & V4L2_STD_625_50) { | 
 | 		/* Don't follow NTSC Line number convension */ | 
 | 		line += 3; | 
 | 	} | 
 |  | 
 | 	if (line < 6 || line > 27) | 
 | 		return 0; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) { | 
 | 		const struct i2c_vbi_ram_value *regs =  &vbi_ram_default[i]; | 
 |  | 
 | 		if (!regs->type.vbi_type) | 
 | 			continue; | 
 |  | 
 | 		if ((type & regs->type.vbi_type) && | 
 | 		    (line >= regs->type.ini_line) && | 
 | 		    (line <= regs->type.end_line)) | 
 | 			break; | 
 | 		pos++; | 
 | 	} | 
 |  | 
 | 	type = pos | (flags & 0xf0); | 
 | 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI; | 
 |  | 
 | 	if (fields & 1) | 
 | 		regmap_write(decoder->regmap, reg, type); | 
 |  | 
 | 	if (fields & 2) | 
 | 		regmap_write(decoder->regmap, reg + 1, type); | 
 |  | 
 | 	return type; | 
 | } | 
 |  | 
 | static int tvp5150_get_vbi(struct v4l2_subdev *sd, int line) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	v4l2_std_id std = decoder->norm; | 
 | 	u8 reg; | 
 | 	int pos, type = 0; | 
 | 	int i, ret = 0; | 
 |  | 
 | 	if (std == V4L2_STD_ALL) { | 
 | 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n"); | 
 | 		return 0; | 
 | 	} else if (std & V4L2_STD_625_50) { | 
 | 		/* Don't follow NTSC Line number convension */ | 
 | 		line += 3; | 
 | 	} | 
 |  | 
 | 	if (line < 6 || line > 27) | 
 | 		return 0; | 
 |  | 
 | 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI; | 
 |  | 
 | 	for (i = 0; i <= 1; i++) { | 
 | 		ret = tvp5150_read(sd, reg + i); | 
 | 		if (ret < 0) { | 
 | 			dev_err(sd->dev, "%s: failed with error = %d\n", | 
 | 				 __func__, ret); | 
 | 			return 0; | 
 | 		} | 
 | 		pos = ret & 0x0f; | 
 | 		if (pos < ARRAY_SIZE(vbi_ram_default)) | 
 | 			type |= vbi_ram_default[pos].type.vbi_type; | 
 | 	} | 
 |  | 
 | 	return type; | 
 | } | 
 |  | 
 | static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	int fmt = 0; | 
 |  | 
 | 	/* First tests should be against specific std */ | 
 |  | 
 | 	if (std == V4L2_STD_NTSC_443) { | 
 | 		fmt = VIDEO_STD_NTSC_4_43_BIT; | 
 | 	} else if (std == V4L2_STD_PAL_M) { | 
 | 		fmt = VIDEO_STD_PAL_M_BIT; | 
 | 	} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) { | 
 | 		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT; | 
 | 	} else { | 
 | 		/* Then, test against generic ones */ | 
 | 		if (std & V4L2_STD_NTSC) | 
 | 			fmt = VIDEO_STD_NTSC_MJ_BIT; | 
 | 		else if (std & V4L2_STD_PAL) | 
 | 			fmt = VIDEO_STD_PAL_BDGHIN_BIT; | 
 | 		else if (std & V4L2_STD_SECAM) | 
 | 			fmt = VIDEO_STD_SECAM_BIT; | 
 | 	} | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt); | 
 | 	regmap_write(decoder->regmap, TVP5150_VIDEO_STD, fmt); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	*std = decoder->norm; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	struct tvp5150_connector *cur_con = decoder->cur_connector; | 
 | 	v4l2_std_id supported_stds; | 
 |  | 
 | 	if (decoder->norm == std) | 
 | 		return 0; | 
 |  | 
 | 	/* In case of no of-connectors are available no limitations are made */ | 
 | 	if (!decoder->connectors_num) | 
 | 		supported_stds = V4L2_STD_ALL; | 
 | 	else | 
 | 		supported_stds = cur_con->base.connector.analog.sdtv_stds; | 
 |  | 
 | 	/* | 
 | 	 * Check if requested std or group of std's is/are supported by the | 
 | 	 * connector. | 
 | 	 */ | 
 | 	if ((supported_stds & std) == 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Change cropping height limits */ | 
 | 	if (std & V4L2_STD_525_60) | 
 | 		decoder->rect.height = TVP5150_V_MAX_525_60; | 
 | 	else | 
 | 		decoder->rect.height = TVP5150_V_MAX_OTHERS; | 
 |  | 
 | 	/* Set only the specific supported std in case of group of std's. */ | 
 | 	decoder->norm = supported_stds & std; | 
 |  | 
 | 	return tvp5150_set_std(sd, std); | 
 | } | 
 |  | 
 | static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd) | 
 | { | 
 | 	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5); | 
 |  | 
 | 	switch (val & 0x0F) { | 
 | 	case 0x01: | 
 | 		return V4L2_STD_NTSC; | 
 | 	case 0x03: | 
 | 		return V4L2_STD_PAL; | 
 | 	case 0x05: | 
 | 		return V4L2_STD_PAL_M; | 
 | 	case 0x07: | 
 | 		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc; | 
 | 	case 0x09: | 
 | 		return V4L2_STD_NTSC_443; | 
 | 	case 0xb: | 
 | 		return V4L2_STD_SECAM; | 
 | 	default: | 
 | 		return V4L2_STD_UNKNOWN; | 
 | 	} | 
 | } | 
 |  | 
 | static int query_lock(struct v4l2_subdev *sd) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	int status; | 
 |  | 
 | 	if (decoder->irq) | 
 | 		return decoder->lock; | 
 |  | 
 | 	regmap_read(decoder->regmap, TVP5150_STATUS_REG_1, &status); | 
 |  | 
 | 	/* For standard detection, we need the 3 locks */ | 
 | 	return (status & 0x0e) == 0x0e; | 
 | } | 
 |  | 
 | static int tvp5150_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id) | 
 | { | 
 | 	*std_id = query_lock(sd) ? tvp5150_read_std(sd) : V4L2_STD_UNKNOWN; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct v4l2_event tvp5150_ev_fmt = { | 
 | 	.type = V4L2_EVENT_SOURCE_CHANGE, | 
 | 	.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION, | 
 | }; | 
 |  | 
 | static irqreturn_t tvp5150_isr(int irq, void *dev_id) | 
 | { | 
 | 	struct tvp5150 *decoder = dev_id; | 
 | 	struct regmap *map = decoder->regmap; | 
 | 	unsigned int mask, active = 0, status = 0; | 
 |  | 
 | 	mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE | | 
 | 	       TVP5150_MISC_CTL_CLOCK_OE; | 
 |  | 
 | 	regmap_read(map, TVP5150_INT_STATUS_REG_A, &status); | 
 | 	if (status) { | 
 | 		regmap_write(map, TVP5150_INT_STATUS_REG_A, status); | 
 |  | 
 | 		if (status & TVP5150_INT_A_LOCK) { | 
 | 			decoder->lock = !!(status & TVP5150_INT_A_LOCK_STATUS); | 
 | 			dev_dbg_lvl(decoder->sd.dev, 1, debug, | 
 | 				    "sync lo%s signal\n", | 
 | 				    decoder->lock ? "ck" : "ss"); | 
 | 			v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt); | 
 | 			regmap_update_bits(map, TVP5150_MISC_CTL, mask, | 
 | 					   decoder->lock ? decoder->oe : 0); | 
 | 		} | 
 |  | 
 | 		return IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	regmap_read(map, TVP5150_INT_ACTIVE_REG_B, &active); | 
 | 	if (active) { | 
 | 		status = 0; | 
 | 		regmap_read(map, TVP5150_INT_STATUS_REG_B, &status); | 
 | 		if (status) | 
 | 			regmap_write(map, TVP5150_INT_RESET_REG_B, status); | 
 | 	} | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	struct regmap *map = decoder->regmap; | 
 |  | 
 | 	/* Initializes TVP5150 to its default values */ | 
 | 	tvp5150_write_inittab(sd, tvp5150_init_default); | 
 |  | 
 | 	if (decoder->irq) { | 
 | 		/* Configure pins: FID, VSYNC, INTREQ, SCLK */ | 
 | 		regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x0); | 
 | 		/* Set interrupt polarity to active high */ | 
 | 		regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE | 0x1); | 
 | 		regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x1); | 
 | 	} else { | 
 | 		/* Configure pins: FID, VSYNC, GPCL/VBLK, SCLK */ | 
 | 		regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x2); | 
 | 		/* Keep interrupt polarity active low */ | 
 | 		regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE); | 
 | 		regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x0); | 
 | 	} | 
 |  | 
 | 	/* Initializes VDP registers */ | 
 | 	tvp5150_vdp_init(sd); | 
 |  | 
 | 	/* Selects decoder input */ | 
 | 	tvp5150_selmux(sd); | 
 |  | 
 | 	/* Initialize image preferences */ | 
 | 	v4l2_ctrl_handler_setup(&decoder->hdl); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_enable(struct v4l2_subdev *sd) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	v4l2_std_id std; | 
 |  | 
 | 	/* Initializes TVP5150 to stream enabled values */ | 
 | 	tvp5150_write_inittab(sd, tvp5150_init_enable); | 
 |  | 
 | 	if (decoder->norm == V4L2_STD_ALL) | 
 | 		std = tvp5150_read_std(sd); | 
 | 	else | 
 | 		std = decoder->norm; | 
 |  | 
 | 	/* Disable autoswitch mode */ | 
 | 	tvp5150_set_std(sd, std); | 
 |  | 
 | 	/* | 
 | 	 * Enable the YCbCr and clock outputs. In discrete sync mode | 
 | 	 * (non-BT.656) additionally enable the sync outputs. | 
 | 	 */ | 
 | 	switch (decoder->mbus_type) { | 
 | 	case V4L2_MBUS_PARALLEL: | 
 | 		/* 8-bit 4:2:2 YUV with discrete sync output */ | 
 | 		regmap_update_bits(decoder->regmap, TVP5150_DATA_RATE_SEL, | 
 | 				   0x7, 0x0); | 
 | 		decoder->oe = TVP5150_MISC_CTL_YCBCR_OE | | 
 | 			      TVP5150_MISC_CTL_CLOCK_OE | | 
 | 			      TVP5150_MISC_CTL_SYNC_OE; | 
 | 		break; | 
 | 	case V4L2_MBUS_BT656: | 
 | 		decoder->oe = TVP5150_MISC_CTL_YCBCR_OE | | 
 | 			      TVP5150_MISC_CTL_CLOCK_OE; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | }; | 
 |  | 
 | static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl) | 
 | { | 
 | 	struct v4l2_subdev *sd = to_sd(ctrl); | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	switch (ctrl->id) { | 
 | 	case V4L2_CID_BRIGHTNESS: | 
 | 		regmap_write(decoder->regmap, TVP5150_BRIGHT_CTL, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_CONTRAST: | 
 | 		regmap_write(decoder->regmap, TVP5150_CONTRAST_CTL, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_SATURATION: | 
 | 		regmap_write(decoder->regmap, TVP5150_SATURATION_CTL, | 
 | 			     ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_HUE: | 
 | 		regmap_write(decoder->regmap, TVP5150_HUE_CTL, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_TEST_PATTERN: | 
 | 		decoder->enable = ctrl->val ? false : true; | 
 | 		tvp5150_selmux(sd); | 
 | 		return 0; | 
 | 	} | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop) | 
 | { | 
 | 	/* Default is no cropping */ | 
 | 	crop->top = 0; | 
 | 	crop->left = 0; | 
 | 	crop->width = TVP5150_H_MAX; | 
 | 	if (std & V4L2_STD_525_60) | 
 | 		crop->height = TVP5150_V_MAX_525_60; | 
 | 	else | 
 | 		crop->height = TVP5150_V_MAX_OTHERS; | 
 | } | 
 |  | 
 | static struct v4l2_rect * | 
 | tvp5150_get_pad_crop(struct tvp5150 *decoder, | 
 | 		     struct v4l2_subdev_state *sd_state, unsigned int pad, | 
 | 		     enum v4l2_subdev_format_whence which) | 
 | { | 
 | 	switch (which) { | 
 | 	case V4L2_SUBDEV_FORMAT_ACTIVE: | 
 | 		return &decoder->rect; | 
 | 	case V4L2_SUBDEV_FORMAT_TRY: | 
 | #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) | 
 | 		return v4l2_subdev_get_try_crop(&decoder->sd, sd_state, pad); | 
 | #else | 
 | 		return ERR_PTR(-EINVAL); | 
 | #endif | 
 | 	default: | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 | } | 
 |  | 
 | static int tvp5150_fill_fmt(struct v4l2_subdev *sd, | 
 | 			    struct v4l2_subdev_state *sd_state, | 
 | 			    struct v4l2_subdev_format *format) | 
 | { | 
 | 	struct v4l2_mbus_framefmt *f; | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	if (!format || (format->pad != TVP5150_PAD_VID_OUT)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	f = &format->format; | 
 |  | 
 | 	f->width = decoder->rect.width; | 
 | 	f->height = decoder->rect.height / 2; | 
 |  | 
 | 	f->code = TVP5150_MBUS_FMT; | 
 | 	f->field = TVP5150_FIELD; | 
 | 	f->colorspace = TVP5150_COLORSPACE; | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width, | 
 | 		    f->height); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	v4l2_std_id std; | 
 |  | 
 | 	/* Calculate height based on current standard */ | 
 | 	if (decoder->norm == V4L2_STD_ALL) | 
 | 		std = tvp5150_read_std(sd); | 
 | 	else | 
 | 		std = decoder->norm; | 
 |  | 
 | 	return (std & V4L2_STD_525_60) ? | 
 | 		TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS; | 
 | } | 
 |  | 
 | static void tvp5150_set_hw_selection(struct v4l2_subdev *sd, | 
 | 				     struct v4l2_rect *rect) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	unsigned int hmax = tvp5150_get_hmax(sd); | 
 |  | 
 | 	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top); | 
 | 	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP, | 
 | 		     rect->top + rect->height - hmax); | 
 | 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB, | 
 | 		     rect->left >> TVP5150_CROP_SHIFT); | 
 | 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB, | 
 | 		     rect->left | (1 << TVP5150_CROP_SHIFT)); | 
 | 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB, | 
 | 		     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >> | 
 | 		     TVP5150_CROP_SHIFT); | 
 | 	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB, | 
 | 		     rect->left + rect->width - TVP5150_MAX_CROP_LEFT); | 
 | } | 
 |  | 
 | static int tvp5150_set_selection(struct v4l2_subdev *sd, | 
 | 				 struct v4l2_subdev_state *sd_state, | 
 | 				 struct v4l2_subdev_selection *sel) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	struct v4l2_rect *rect = &sel->r; | 
 | 	struct v4l2_rect *crop; | 
 | 	unsigned int hmax; | 
 |  | 
 | 	if (sel->target != V4L2_SEL_TGT_CROP) | 
 | 		return -EINVAL; | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n", | 
 | 		__func__, rect->left, rect->top, rect->width, rect->height); | 
 |  | 
 | 	/* tvp5150 has some special limits */ | 
 | 	rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT); | 
 | 	rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP); | 
 | 	hmax = tvp5150_get_hmax(sd); | 
 |  | 
 | 	/* | 
 | 	 * alignments: | 
 | 	 *  - width = 2 due to UYVY colorspace | 
 | 	 *  - height, image = no special alignment | 
 | 	 */ | 
 | 	v4l_bound_align_image(&rect->width, | 
 | 			      TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect->left, | 
 | 			      TVP5150_H_MAX - rect->left, 1, &rect->height, | 
 | 			      hmax - TVP5150_MAX_CROP_TOP - rect->top, | 
 | 			      hmax - rect->top, 0, 0); | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) && | 
 | 	    sel->which == V4L2_SUBDEV_FORMAT_TRY) | 
 | 		return 0; | 
 |  | 
 | 	crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad, sel->which); | 
 | 	if (IS_ERR(crop)) | 
 | 		return PTR_ERR(crop); | 
 |  | 
 | 	/* | 
 | 	 * Update output image size if the selection (crop) rectangle size or | 
 | 	 * position has been modified. | 
 | 	 */ | 
 | 	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE && | 
 | 	    !v4l2_rect_equal(rect, crop)) | 
 | 		tvp5150_set_hw_selection(sd, rect); | 
 |  | 
 | 	*crop = *rect; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_get_selection(struct v4l2_subdev *sd, | 
 | 				 struct v4l2_subdev_state *sd_state, | 
 | 				 struct v4l2_subdev_selection *sel) | 
 | { | 
 | 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); | 
 | 	struct v4l2_rect *crop; | 
 | 	v4l2_std_id std; | 
 |  | 
 | 	switch (sel->target) { | 
 | 	case V4L2_SEL_TGT_CROP_BOUNDS: | 
 | 		sel->r.left = 0; | 
 | 		sel->r.top = 0; | 
 | 		sel->r.width = TVP5150_H_MAX; | 
 |  | 
 | 		/* Calculate height based on current standard */ | 
 | 		if (decoder->norm == V4L2_STD_ALL) | 
 | 			std = tvp5150_read_std(sd); | 
 | 		else | 
 | 			std = decoder->norm; | 
 | 		if (std & V4L2_STD_525_60) | 
 | 			sel->r.height = TVP5150_V_MAX_525_60; | 
 | 		else | 
 | 			sel->r.height = TVP5150_V_MAX_OTHERS; | 
 | 		return 0; | 
 | 	case V4L2_SEL_TGT_CROP: | 
 | 		crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad, | 
 | 					    sel->which); | 
 | 		if (IS_ERR(crop)) | 
 | 			return PTR_ERR(crop); | 
 | 		sel->r = *crop; | 
 | 		return 0; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static int tvp5150_get_mbus_config(struct v4l2_subdev *sd, | 
 | 				   unsigned int pad, | 
 | 				   struct v4l2_mbus_config *cfg) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	cfg->type = decoder->mbus_type; | 
 | 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | 
 | 		   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /**************************************************************************** | 
 | 			V4L2 subdev pad ops | 
 |  ****************************************************************************/ | 
 | static int tvp5150_init_cfg(struct v4l2_subdev *sd, | 
 | 			    struct v4l2_subdev_state *sd_state) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	v4l2_std_id std; | 
 |  | 
 | 	/* | 
 | 	 * Reset selection to maximum on subdev_open() if autodetection is on | 
 | 	 * and a standard change is detected. | 
 | 	 */ | 
 | 	if (decoder->norm == V4L2_STD_ALL) { | 
 | 		std = tvp5150_read_std(sd); | 
 | 		if (std != decoder->detected_norm) { | 
 | 			decoder->detected_norm = std; | 
 | 			tvp5150_set_default(std, &decoder->rect); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd, | 
 | 		struct v4l2_subdev_state *sd_state, | 
 | 		struct v4l2_subdev_mbus_code_enum *code) | 
 | { | 
 | 	if (code->pad || code->index) | 
 | 		return -EINVAL; | 
 |  | 
 | 	code->code = TVP5150_MBUS_FMT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_enum_frame_size(struct v4l2_subdev *sd, | 
 | 				   struct v4l2_subdev_state *sd_state, | 
 | 				   struct v4l2_subdev_frame_size_enum *fse) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	if (fse->index >= 8 || fse->code != TVP5150_MBUS_FMT) | 
 | 		return -EINVAL; | 
 |  | 
 | 	fse->code = TVP5150_MBUS_FMT; | 
 | 	fse->min_width = decoder->rect.width; | 
 | 	fse->max_width = decoder->rect.width; | 
 | 	fse->min_height = decoder->rect.height / 2; | 
 | 	fse->max_height = decoder->rect.height / 2; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /**************************************************************************** | 
 |  *			Media entity ops | 
 |  ****************************************************************************/ | 
 | #if defined(CONFIG_MEDIA_CONTROLLER) | 
 | static int tvp5150_set_link(struct media_pad *connector_pad, | 
 | 			    struct media_pad *tvp5150_pad, u32 flags) | 
 | { | 
 | 	struct media_link *link; | 
 |  | 
 | 	link = media_entity_find_link(connector_pad, tvp5150_pad); | 
 | 	if (!link) | 
 | 		return -EINVAL; | 
 |  | 
 | 	link->flags = flags; | 
 | 	link->reverse->flags = link->flags; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_disable_all_input_links(struct tvp5150 *decoder) | 
 | { | 
 | 	struct media_pad *connector_pad; | 
 | 	unsigned int i; | 
 | 	int err; | 
 |  | 
 | 	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) { | 
 | 		connector_pad = media_entity_remote_pad(&decoder->pads[i]); | 
 | 		if (!connector_pad) | 
 | 			continue; | 
 |  | 
 | 		err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, | 
 | 			     u32 config); | 
 |  | 
 | static int tvp5150_link_setup(struct media_entity *entity, | 
 | 			      const struct media_pad *tvp5150_pad, | 
 | 			      const struct media_pad *remote, u32 flags) | 
 | { | 
 | 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	struct media_pad *other_tvp5150_pad = | 
 | 		&decoder->pads[tvp5150_pad->index ^ 1]; | 
 | 	struct v4l2_fwnode_connector *v4l2c; | 
 | 	bool is_svideo = false; | 
 | 	unsigned int i; | 
 | 	int err; | 
 |  | 
 | 	/* | 
 | 	 * The TVP5150 state is determined by the enabled sink pad link(s). | 
 | 	 * Enabling or disabling the source pad link has no effect. | 
 | 	 */ | 
 | 	if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE) | 
 | 		return 0; | 
 |  | 
 | 	/* Check if the svideo connector should be enabled */ | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		if (remote->entity == &decoder->connectors[i].ent) { | 
 | 			v4l2c = &decoder->connectors[i].base; | 
 | 			is_svideo = v4l2c->type == V4L2_CONN_SVIDEO; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]", | 
 | 		    remote->entity->name, remote->index, | 
 | 		    tvp5150_pad->entity->name, tvp5150_pad->index, | 
 | 		    flags & MEDIA_LNK_FL_ENABLED); | 
 | 	if (is_svideo) | 
 | 		dev_dbg_lvl(sd->dev, 1, debug, | 
 | 			    "link setup '%s':%d->'%s':%d[%d]", | 
 | 			    remote->entity->name, remote->index, | 
 | 			    other_tvp5150_pad->entity->name, | 
 | 			    other_tvp5150_pad->index, | 
 | 			    flags & MEDIA_LNK_FL_ENABLED); | 
 |  | 
 | 	/* | 
 | 	 * The TVP5150 has an internal mux which allows the following setup: | 
 | 	 * | 
 | 	 * comp-connector1  --\ | 
 | 	 *		       |---> AIP1A | 
 | 	 *		      / | 
 | 	 * svideo-connector -| | 
 | 	 *		      \ | 
 | 	 *		       |---> AIP1B | 
 | 	 * comp-connector2  --/ | 
 | 	 * | 
 | 	 * We can't rely on user space that the current connector gets disabled | 
 | 	 * first before enabling the new connector. Disable all active | 
 | 	 * connector links to be on the safe side. | 
 | 	 */ | 
 | 	err = tvp5150_disable_all_input_links(decoder); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index, | 
 | 			  flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL : | 
 | 			  TVP5150_BLACK_SCREEN, 0); | 
 |  | 
 | 	if (flags & MEDIA_LNK_FL_ENABLED) { | 
 | 		struct v4l2_fwnode_connector_analog *v4l2ca; | 
 | 		u32 new_norm; | 
 |  | 
 | 		/* | 
 | 		 * S-Video connector is conneted to both ports AIP1A and AIP1B. | 
 | 		 * Both links must be enabled in one-shot regardless which link | 
 | 		 * the user requests. | 
 | 		 */ | 
 | 		if (is_svideo) { | 
 | 			err = tvp5150_set_link((struct media_pad *)remote, | 
 | 					       other_tvp5150_pad, flags); | 
 | 			if (err) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 		if (!decoder->connectors_num) | 
 | 			return 0; | 
 |  | 
 | 		/* Update the current connector */ | 
 | 		decoder->cur_connector = | 
 | 			container_of(remote, struct tvp5150_connector, pad); | 
 |  | 
 | 		/* | 
 | 		 * Do nothing if the new connector supports the same tv-norms as | 
 | 		 * the old one. | 
 | 		 */ | 
 | 		v4l2ca = &decoder->cur_connector->base.connector.analog; | 
 | 		new_norm = decoder->norm & v4l2ca->sdtv_stds; | 
 | 		if (decoder->norm == new_norm) | 
 | 			return 0; | 
 |  | 
 | 		/* | 
 | 		 * Fallback to the new connector tv-norms if we can't find any | 
 | 		 * common between the current tv-norm and the new one. | 
 | 		 */ | 
 | 		tvp5150_s_std(sd, new_norm ? new_norm : v4l2ca->sdtv_stds); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct media_entity_operations tvp5150_sd_media_ops = { | 
 | 	.link_setup = tvp5150_link_setup, | 
 | }; | 
 | #endif | 
 | /**************************************************************************** | 
 | 			I2C Command | 
 |  ****************************************************************************/ | 
 | static int __maybe_unused tvp5150_runtime_suspend(struct device *dev) | 
 | { | 
 | 	struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	if (decoder->irq) | 
 | 		/* Disable lock interrupt */ | 
 | 		return regmap_update_bits(decoder->regmap, | 
 | 					  TVP5150_INT_ENABLE_REG_A, | 
 | 					  TVP5150_INT_A_LOCK, 0); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __maybe_unused tvp5150_runtime_resume(struct device *dev) | 
 | { | 
 | 	struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	if (decoder->irq) | 
 | 		/* Enable lock interrupt */ | 
 | 		return regmap_update_bits(decoder->regmap, | 
 | 					  TVP5150_INT_ENABLE_REG_A, | 
 | 					  TVP5150_INT_A_LOCK, | 
 | 					  TVP5150_INT_A_LOCK); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	unsigned int mask, val = 0; | 
 | 	int ret; | 
 |  | 
 | 	mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE | | 
 | 	       TVP5150_MISC_CTL_CLOCK_OE; | 
 |  | 
 | 	if (enable) { | 
 | 		ret = pm_runtime_resume_and_get(sd->dev); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		tvp5150_enable(sd); | 
 |  | 
 | 		/* Enable outputs if decoder is locked */ | 
 | 		if (decoder->irq) | 
 | 			val = decoder->lock ? decoder->oe : 0; | 
 | 		else | 
 | 			val = decoder->oe; | 
 |  | 
 | 		v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt); | 
 | 	} else { | 
 | 		pm_runtime_put(sd->dev); | 
 | 	} | 
 |  | 
 | 	regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_routing(struct v4l2_subdev *sd, | 
 | 			     u32 input, u32 output, u32 config) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	decoder->input = input; | 
 | 	decoder->output = output; | 
 |  | 
 | 	if (output == TVP5150_BLACK_SCREEN) | 
 | 		decoder->enable = false; | 
 | 	else | 
 | 		decoder->enable = true; | 
 |  | 
 | 	tvp5150_selmux(sd); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	/* | 
 | 	 * this is for capturing 36 raw vbi lines | 
 | 	 * if there's a way to cut off the beginning 2 vbi lines | 
 | 	 * with the tvp5150 then the vbi line count could be lowered | 
 | 	 * to 17 lines/field again, although I couldn't find a register | 
 | 	 * which could do that cropping | 
 | 	 */ | 
 |  | 
 | 	if (fmt->sample_format == V4L2_PIX_FMT_GREY) | 
 | 		regmap_write(decoder->regmap, TVP5150_LUMA_PROC_CTL_1, 0x70); | 
 | 	if (fmt->count[0] == 18 && fmt->count[1] == 18) { | 
 | 		regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, | 
 | 			     0x00); | 
 | 		regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP, 0x01); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	int i; | 
 |  | 
 | 	if (svbi->service_set != 0) { | 
 | 		for (i = 0; i <= 23; i++) { | 
 | 			svbi->service_lines[1][i] = 0; | 
 | 			svbi->service_lines[0][i] = | 
 | 				tvp5150_set_vbi(sd, svbi->service_lines[0][i], | 
 | 						0xf0, i, 3); | 
 | 		} | 
 | 		/* Enables FIFO */ | 
 | 		regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 1); | 
 | 	} else { | 
 | 		/* Disables FIFO*/ | 
 | 		regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 0); | 
 |  | 
 | 		/* Disable Full Field */ | 
 | 		regmap_write(decoder->regmap, TVP5150_FULL_FIELD_ENA, 0); | 
 |  | 
 | 		/* Disable Line modes */ | 
 | 		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) | 
 | 			regmap_write(decoder->regmap, i, 0xff); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) | 
 | { | 
 | 	int i, mask = 0; | 
 |  | 
 | 	memset(svbi->service_lines, 0, sizeof(svbi->service_lines)); | 
 |  | 
 | 	for (i = 0; i <= 23; i++) { | 
 | 		svbi->service_lines[0][i] = | 
 | 			tvp5150_get_vbi(sd, i); | 
 | 		mask |= svbi->service_lines[0][i]; | 
 | 	} | 
 | 	svbi->service_set = mask; | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_VIDEO_ADV_DEBUG | 
 | static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) | 
 | { | 
 | 	int res; | 
 |  | 
 | 	res = tvp5150_read(sd, reg->reg & 0xff); | 
 | 	if (res < 0) { | 
 | 		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res); | 
 | 		return res; | 
 | 	} | 
 |  | 
 | 	reg->val = res; | 
 | 	reg->size = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) | 
 | { | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 |  | 
 | 	return regmap_write(decoder->regmap, reg->reg & 0xff, reg->val & 0xff); | 
 | } | 
 | #endif | 
 |  | 
 | static int tvp5150_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, | 
 | 				   struct v4l2_event_subscription *sub) | 
 | { | 
 | 	switch (sub->type) { | 
 | 	case V4L2_EVENT_SOURCE_CHANGE: | 
 | 		return v4l2_src_change_event_subdev_subscribe(sd, fh, sub); | 
 | 	case V4L2_EVENT_CTRL: | 
 | 		return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) | 
 | { | 
 | 	int status = tvp5150_read(sd, 0x88); | 
 |  | 
 | 	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_registered(struct v4l2_subdev *sd) | 
 | { | 
 | #if defined(CONFIG_MEDIA_CONTROLLER) | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Setup connector pads and links. Enable the link to the first | 
 | 	 * available connector per default. | 
 | 	 */ | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		struct media_entity *con = &decoder->connectors[i].ent; | 
 | 		struct media_pad *pad = &decoder->connectors[i].pad; | 
 | 		struct v4l2_fwnode_connector *v4l2c = | 
 | 			&decoder->connectors[i].base; | 
 | 		struct v4l2_connector_link *link = | 
 | 			v4l2_connector_first_link(v4l2c); | 
 | 		unsigned int port = link->fwnode_link.remote_port; | 
 | 		unsigned int flags = i ? 0 : MEDIA_LNK_FL_ENABLED; | 
 | 		bool is_svideo = v4l2c->type == V4L2_CONN_SVIDEO; | 
 |  | 
 | 		pad->flags = MEDIA_PAD_FL_SOURCE; | 
 | 		ret = media_entity_pads_init(con, 1, pad); | 
 | 		if (ret < 0) | 
 | 			goto err; | 
 |  | 
 | 		ret = media_device_register_entity(sd->v4l2_dev->mdev, con); | 
 | 		if (ret < 0) | 
 | 			goto err; | 
 |  | 
 | 		ret = media_create_pad_link(con, 0, &sd->entity, port, flags); | 
 | 		if (ret < 0) | 
 | 			goto err; | 
 |  | 
 | 		if (is_svideo) { | 
 | 			/* | 
 | 			 * Check tvp5150_link_setup() comments for more | 
 | 			 * information. | 
 | 			 */ | 
 | 			link = v4l2_connector_last_link(v4l2c); | 
 | 			port = link->fwnode_link.remote_port; | 
 | 			ret = media_create_pad_link(con, 0, &sd->entity, port, | 
 | 						    flags); | 
 | 			if (ret < 0) | 
 | 				goto err; | 
 | 		} | 
 |  | 
 | 		/* Enable default input. */ | 
 | 		if (flags == MEDIA_LNK_FL_ENABLED) { | 
 | 			decoder->input = | 
 | 				is_svideo ? TVP5150_SVIDEO : | 
 | 				port == 0 ? TVP5150_COMPOSITE0 : | 
 | 				TVP5150_COMPOSITE1; | 
 |  | 
 | 			tvp5150_selmux(sd); | 
 | 			decoder->cur_connector = &decoder->connectors[i]; | 
 | 			tvp5150_s_std(sd, v4l2c->connector.analog.sdtv_stds); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		media_device_unregister_entity(&decoder->connectors[i].ent); | 
 | 		media_entity_cleanup(&decoder->connectors[i].ent); | 
 | 	} | 
 | 	return ret; | 
 | #endif | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
 | { | 
 | 	return pm_runtime_resume_and_get(sd->dev); | 
 | } | 
 |  | 
 | static int tvp5150_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
 | { | 
 | 	pm_runtime_put(sd->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------- */ | 
 |  | 
 | static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { | 
 | 	.s_ctrl = tvp5150_s_ctrl, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_core_ops tvp5150_core_ops = { | 
 | 	.log_status = tvp5150_log_status, | 
 | 	.reset = tvp5150_reset, | 
 | #ifdef CONFIG_VIDEO_ADV_DEBUG | 
 | 	.g_register = tvp5150_g_register, | 
 | 	.s_register = tvp5150_s_register, | 
 | #endif | 
 | 	.subscribe_event = tvp5150_subscribe_event, | 
 | 	.unsubscribe_event = v4l2_event_subdev_unsubscribe, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { | 
 | 	.g_tuner = tvp5150_g_tuner, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_video_ops tvp5150_video_ops = { | 
 | 	.s_std = tvp5150_s_std, | 
 | 	.g_std = tvp5150_g_std, | 
 | 	.querystd = tvp5150_querystd, | 
 | 	.s_stream = tvp5150_s_stream, | 
 | 	.s_routing = tvp5150_s_routing, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { | 
 | 	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap, | 
 | 	.g_sliced_fmt = tvp5150_g_sliced_fmt, | 
 | 	.s_sliced_fmt = tvp5150_s_sliced_fmt, | 
 | 	.s_raw_fmt = tvp5150_s_raw_fmt, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = { | 
 | 	.init_cfg = tvp5150_init_cfg, | 
 | 	.enum_mbus_code = tvp5150_enum_mbus_code, | 
 | 	.enum_frame_size = tvp5150_enum_frame_size, | 
 | 	.set_fmt = tvp5150_fill_fmt, | 
 | 	.get_fmt = tvp5150_fill_fmt, | 
 | 	.get_selection = tvp5150_get_selection, | 
 | 	.set_selection = tvp5150_set_selection, | 
 | 	.get_mbus_config = tvp5150_get_mbus_config, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_ops tvp5150_ops = { | 
 | 	.core = &tvp5150_core_ops, | 
 | 	.tuner = &tvp5150_tuner_ops, | 
 | 	.video = &tvp5150_video_ops, | 
 | 	.vbi = &tvp5150_vbi_ops, | 
 | 	.pad = &tvp5150_pad_ops, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = { | 
 | 	.registered = tvp5150_registered, | 
 | 	.open = tvp5150_open, | 
 | 	.close = tvp5150_close, | 
 | }; | 
 |  | 
 | /**************************************************************************** | 
 | 			I2C Client & Driver | 
 |  ****************************************************************************/ | 
 |  | 
 | static const struct regmap_range tvp5150_readable_ranges[] = { | 
 | 	{ | 
 | 		.range_min = TVP5150_VD_IN_SRC_SEL_1, | 
 | 		.range_max = TVP5150_AUTOSW_MSK, | 
 | 	}, { | 
 | 		.range_min = TVP5150_COLOR_KIL_THSH_CTL, | 
 | 		.range_max = TVP5150_CONF_SHARED_PIN, | 
 | 	}, { | 
 | 		.range_min = TVP5150_ACT_VD_CROP_ST_MSB, | 
 | 		.range_max = TVP5150_HORIZ_SYNC_START, | 
 | 	}, { | 
 | 		.range_min = TVP5150_VERT_BLANKING_START, | 
 | 		.range_max = TVP5150_INTT_CONFIG_REG_B, | 
 | 	}, { | 
 | 		.range_min = TVP5150_VIDEO_STD, | 
 | 		.range_max = TVP5150_VIDEO_STD, | 
 | 	}, { | 
 | 		.range_min = TVP5150_CB_GAIN_FACT, | 
 | 		.range_max = TVP5150_REV_SELECT, | 
 | 	}, { | 
 | 		.range_min = TVP5150_MSB_DEV_ID, | 
 | 		.range_max = TVP5150_STATUS_REG_5, | 
 | 	}, { | 
 | 		.range_min = TVP5150_CC_DATA_INI, | 
 | 		.range_max = TVP5150_TELETEXT_FIL_ENA, | 
 | 	}, { | 
 | 		.range_min = TVP5150_INT_STATUS_REG_A, | 
 | 		.range_max = TVP5150_FIFO_OUT_CTRL, | 
 | 	}, { | 
 | 		.range_min = TVP5150_FULL_FIELD_ENA, | 
 | 		.range_max = TVP5150_FULL_FIELD_MODE_REG, | 
 | 	}, | 
 | }; | 
 |  | 
 | static bool tvp5150_volatile_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case TVP5150_VERT_LN_COUNT_MSB: | 
 | 	case TVP5150_VERT_LN_COUNT_LSB: | 
 | 	case TVP5150_INT_STATUS_REG_A: | 
 | 	case TVP5150_INT_STATUS_REG_B: | 
 | 	case TVP5150_INT_ACTIVE_REG_B: | 
 | 	case TVP5150_STATUS_REG_1: | 
 | 	case TVP5150_STATUS_REG_2: | 
 | 	case TVP5150_STATUS_REG_3: | 
 | 	case TVP5150_STATUS_REG_4: | 
 | 	case TVP5150_STATUS_REG_5: | 
 | 	/* CC, WSS, VPS, VITC data? */ | 
 | 	case TVP5150_VBI_FIFO_READ_DATA: | 
 | 	case TVP5150_VDP_STATUS_REG: | 
 | 	case TVP5150_FIFO_WORD_COUNT: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct regmap_access_table tvp5150_readable_table = { | 
 | 	.yes_ranges = tvp5150_readable_ranges, | 
 | 	.n_yes_ranges = ARRAY_SIZE(tvp5150_readable_ranges), | 
 | }; | 
 |  | 
 | static struct regmap_config tvp5150_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | 	.max_register = 0xff, | 
 |  | 
 | 	.cache_type = REGCACHE_RBTREE, | 
 |  | 
 | 	.rd_table = &tvp5150_readable_table, | 
 | 	.volatile_reg = tvp5150_volatile_reg, | 
 | }; | 
 |  | 
 | static int tvp5150_detect_version(struct tvp5150 *core) | 
 | { | 
 | 	struct v4l2_subdev *sd = &core->sd; | 
 | 	struct i2c_client *c = v4l2_get_subdevdata(sd); | 
 | 	u8 regs[4]; | 
 | 	int res; | 
 |  | 
 | 	/* | 
 | 	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID, | 
 | 	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER | 
 | 	 */ | 
 | 	res = regmap_bulk_read(core->regmap, TVP5150_MSB_DEV_ID, regs, 4); | 
 | 	if (res < 0) { | 
 | 		dev_err(&c->dev, "reading ID registers failed: %d\n", res); | 
 | 		return res; | 
 | 	} | 
 |  | 
 | 	core->dev_id = (regs[0] << 8) | regs[1]; | 
 | 	core->rom_ver = (regs[2] << 8) | regs[3]; | 
 |  | 
 | 	dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n", | 
 | 		  core->dev_id, regs[2], regs[3], c->addr << 1, | 
 | 		  c->adapter->name); | 
 |  | 
 | 	if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) { | 
 | 		dev_info(sd->dev, "tvp5150a detected.\n"); | 
 | 	} else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) { | 
 | 		dev_info(sd->dev, "tvp5150am1 detected.\n"); | 
 |  | 
 | 		/* ITU-T BT.656.4 timing */ | 
 | 		regmap_write(core->regmap, TVP5150_REV_SELECT, 0); | 
 | 	} else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) { | 
 | 		dev_info(sd->dev, "tvp5151 detected.\n"); | 
 | 	} else { | 
 | 		dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n", | 
 | 			  core->dev_id); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_init(struct i2c_client *c) | 
 | { | 
 | 	struct gpio_desc *pdn_gpio; | 
 | 	struct gpio_desc *reset_gpio; | 
 |  | 
 | 	pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(pdn_gpio)) | 
 | 		return PTR_ERR(pdn_gpio); | 
 |  | 
 | 	if (pdn_gpio) { | 
 | 		gpiod_set_value_cansleep(pdn_gpio, 0); | 
 | 		/* Delay time between power supplies active and reset */ | 
 | 		msleep(20); | 
 | 	} | 
 |  | 
 | 	reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(reset_gpio)) | 
 | 		return PTR_ERR(reset_gpio); | 
 |  | 
 | 	if (reset_gpio) { | 
 | 		/* RESETB pulse duration */ | 
 | 		ndelay(500); | 
 | 		gpiod_set_value_cansleep(reset_gpio, 0); | 
 | 		/* Delay time between end of reset to I2C active */ | 
 | 		usleep_range(200, 250); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #if defined(CONFIG_MEDIA_CONTROLLER) | 
 | static int tvp5150_mc_init(struct tvp5150 *decoder) | 
 | { | 
 | 	struct v4l2_subdev *sd = &decoder->sd; | 
 | 	unsigned int i; | 
 |  | 
 | 	sd->entity.ops = &tvp5150_sd_media_ops; | 
 | 	sd->entity.function = MEDIA_ENT_F_ATV_DECODER; | 
 |  | 
 | 	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) { | 
 | 		decoder->pads[i].flags = MEDIA_PAD_FL_SINK; | 
 | 		decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG; | 
 | 	} | 
 |  | 
 | 	decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE; | 
 | 	decoder->pads[i].sig_type = PAD_SIGNAL_DV; | 
 |  | 
 | 	return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, | 
 | 				      decoder->pads); | 
 | } | 
 |  | 
 | #else /* !defined(CONFIG_MEDIA_CONTROLLER) */ | 
 |  | 
 | static inline int tvp5150_mc_init(struct tvp5150 *decoder) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #endif /* defined(CONFIG_MEDIA_CONTROLLER) */ | 
 |  | 
 | static int tvp5150_validate_connectors(struct tvp5150 *decoder) | 
 | { | 
 | 	struct device *dev = decoder->sd.dev; | 
 | 	struct tvp5150_connector *tvpc; | 
 | 	struct v4l2_fwnode_connector *v4l2c; | 
 | 	unsigned int i; | 
 |  | 
 | 	if (!decoder->connectors_num) { | 
 | 		dev_err(dev, "No valid connector found\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		struct v4l2_connector_link *link0 = NULL; | 
 | 		struct v4l2_connector_link *link1; | 
 |  | 
 | 		tvpc = &decoder->connectors[i]; | 
 | 		v4l2c = &tvpc->base; | 
 |  | 
 | 		if (v4l2c->type == V4L2_CONN_COMPOSITE) { | 
 | 			if (v4l2c->nr_of_links != 1) { | 
 | 				dev_err(dev, "Composite: connector needs 1 link\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 			link0 = v4l2_connector_first_link(v4l2c); | 
 | 			if (!link0) { | 
 | 				dev_err(dev, "Composite: invalid first link\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 			if (link0->fwnode_link.remote_id == 1) { | 
 | 				dev_err(dev, "Composite: invalid endpoint id\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (v4l2c->type == V4L2_CONN_SVIDEO) { | 
 | 			if (v4l2c->nr_of_links != 2) { | 
 | 				dev_err(dev, "SVideo: connector needs 2 links\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 			link0 = v4l2_connector_first_link(v4l2c); | 
 | 			if (!link0) { | 
 | 				dev_err(dev, "SVideo: invalid first link\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 			link1 = v4l2_connector_last_link(v4l2c); | 
 | 			if (link0->fwnode_link.remote_port == | 
 | 			    link1->fwnode_link.remote_port) { | 
 | 				dev_err(dev, "SVideo: invalid link setup\n"); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (!(v4l2c->connector.analog.sdtv_stds & TVP5150_STD_MASK)) { | 
 | 			dev_err(dev, "Unsupported tv-norm on connector %s\n", | 
 | 				v4l2c->name); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np) | 
 | { | 
 | 	struct device *dev = decoder->sd.dev; | 
 | 	struct v4l2_fwnode_endpoint bus_cfg = { | 
 | 		.bus_type = V4L2_MBUS_UNKNOWN | 
 | 	}; | 
 | 	struct device_node *ep_np; | 
 | 	struct tvp5150_connector *tvpc; | 
 | 	struct v4l2_fwnode_connector *v4l2c; | 
 | 	unsigned int flags, ep_num; | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	/* At least 1 output and 1 input */ | 
 | 	ep_num = of_graph_get_endpoint_count(np); | 
 | 	if (ep_num < 2 || ep_num > 5) { | 
 | 		dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Layout if all connectors are used: | 
 | 	 * | 
 | 	 * tvp-5150 port@0 (AIP1A) | 
 | 	 *	endpoint@0 -----------> Comp0-Con  port | 
 | 	 *	endpoint@1 --------+--> Svideo-Con port | 
 | 	 * tvp-5150 port@1 (AIP1B) | | 
 | 	 *	endpoint@1 --------+ | 
 | 	 *	endpoint@0 -----------> Comp1-Con  port | 
 | 	 * tvp-5150 port@2 | 
 | 	 *	endpoint (video bitstream output at YOUT[0-7] parallel bus) | 
 | 	 */ | 
 | 	for_each_endpoint_of_node(np, ep_np) { | 
 | 		struct fwnode_handle *ep_fwnode = of_fwnode_handle(ep_np); | 
 | 		unsigned int next_connector = decoder->connectors_num; | 
 | 		struct of_endpoint ep; | 
 |  | 
 | 		of_graph_parse_endpoint(ep_np, &ep); | 
 | 		if (ep.port > 1 || ep.id > 1) { | 
 | 			dev_dbg(dev, "Ignore connector on port@%u/ep@%u\n", | 
 | 				ep.port, ep.id); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		tvpc = &decoder->connectors[next_connector]; | 
 | 		v4l2c = &tvpc->base; | 
 |  | 
 | 		if (ep.port == 0 || (ep.port == 1 && ep.id == 0)) { | 
 | 			ret = v4l2_fwnode_connector_parse(ep_fwnode, v4l2c); | 
 | 			if (ret) | 
 | 				goto err_put; | 
 | 			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c); | 
 | 			if (ret) | 
 | 				goto err_put; | 
 | 			decoder->connectors_num++; | 
 | 		} else { | 
 | 			/* Adding the 2nd svideo link */ | 
 | 			for (i = 0; i < TVP5150_MAX_CONNECTORS; i++) { | 
 | 				tvpc = &decoder->connectors[i]; | 
 | 				v4l2c = &tvpc->base; | 
 | 				if (v4l2c->type == V4L2_CONN_SVIDEO) | 
 | 					break; | 
 | 			} | 
 |  | 
 | 			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c); | 
 | 			if (ret) | 
 | 				goto err_put; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = tvp5150_validate_connectors(decoder); | 
 | 	if (ret) | 
 | 		goto err_free; | 
 |  | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		tvpc = &decoder->connectors[i]; | 
 | 		v4l2c = &tvpc->base; | 
 | 		tvpc->ent.flags = MEDIA_ENT_FL_CONNECTOR; | 
 | 		tvpc->ent.function = v4l2c->type == V4L2_CONN_SVIDEO ? | 
 | 			MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE; | 
 | 		tvpc->ent.name = devm_kasprintf(dev, GFP_KERNEL, "%s %s", | 
 | 						v4l2c->name, v4l2c->label ? | 
 | 						v4l2c->label : ""); | 
 | 	} | 
 |  | 
 | 	ep_np = of_graph_get_endpoint_by_regs(np, TVP5150_PAD_VID_OUT, 0); | 
 | 	if (!ep_np) { | 
 | 		ret = -EINVAL; | 
 | 		dev_err(dev, "Error no output endpoint available\n"); | 
 | 		goto err_free; | 
 | 	} | 
 | 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), &bus_cfg); | 
 | 	of_node_put(ep_np); | 
 | 	if (ret) | 
 | 		goto err_free; | 
 |  | 
 | 	flags = bus_cfg.bus.parallel.flags; | 
 | 	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL && | 
 | 	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH && | 
 | 	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH && | 
 | 	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) { | 
 | 		ret = -EINVAL; | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	decoder->mbus_type = bus_cfg.bus_type; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_put: | 
 | 	of_node_put(ep_np); | 
 | err_free: | 
 | 	for (i = 0; i < TVP5150_MAX_CONNECTORS; i++) | 
 | 		v4l2_fwnode_connector_free(&decoder->connectors[i].base); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const char * const tvp5150_test_patterns[2] = { | 
 | 	"Disabled", | 
 | 	"Black screen" | 
 | }; | 
 |  | 
 | static int tvp5150_probe(struct i2c_client *c) | 
 | { | 
 | 	struct tvp5150 *core; | 
 | 	struct v4l2_subdev *sd; | 
 | 	struct device_node *np = c->dev.of_node; | 
 | 	struct regmap *map; | 
 | 	unsigned int i; | 
 | 	int res; | 
 |  | 
 | 	/* Check if the adapter supports the needed features */ | 
 | 	if (!i2c_check_functionality(c->adapter, | 
 | 	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) | 
 | 		return -EIO; | 
 |  | 
 | 	res = tvp5150_init(c); | 
 | 	if (res) | 
 | 		return res; | 
 |  | 
 | 	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL); | 
 | 	if (!core) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	map = devm_regmap_init_i2c(c, &tvp5150_config); | 
 | 	if (IS_ERR(map)) | 
 | 		return PTR_ERR(map); | 
 |  | 
 | 	core->regmap = map; | 
 | 	sd = &core->sd; | 
 | 	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); | 
 | 	sd->internal_ops = &tvp5150_internal_ops; | 
 | 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_OF) && np) { | 
 | 		res = tvp5150_parse_dt(core, np); | 
 | 		if (res) { | 
 | 			dev_err(sd->dev, "DT parsing error: %d\n", res); | 
 | 			return res; | 
 | 		} | 
 | 	} else { | 
 | 		/* Default to BT.656 embedded sync */ | 
 | 		core->mbus_type = V4L2_MBUS_BT656; | 
 | 	} | 
 |  | 
 | 	res = tvp5150_mc_init(core); | 
 | 	if (res) | 
 | 		return res; | 
 |  | 
 | 	res = tvp5150_detect_version(core); | 
 | 	if (res < 0) | 
 | 		return res; | 
 |  | 
 | 	/* | 
 | 	 * Iterate over all available connectors in case they are supported and | 
 | 	 * successfully parsed. Fallback to default autodetect in case they | 
 | 	 * aren't supported. | 
 | 	 */ | 
 | 	for (i = 0; i < core->connectors_num; i++) { | 
 | 		struct v4l2_fwnode_connector *v4l2c; | 
 |  | 
 | 		v4l2c = &core->connectors[i].base; | 
 | 		core->norm |= v4l2c->connector.analog.sdtv_stds; | 
 | 	} | 
 |  | 
 | 	if (!core->connectors_num) | 
 | 		core->norm = V4L2_STD_ALL; | 
 |  | 
 | 	core->detected_norm = V4L2_STD_UNKNOWN; | 
 | 	core->input = TVP5150_COMPOSITE1; | 
 | 	core->enable = true; | 
 |  | 
 | 	v4l2_ctrl_handler_init(&core->hdl, 5); | 
 | 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, | 
 | 			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); | 
 | 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, | 
 | 			V4L2_CID_CONTRAST, 0, 255, 1, 128); | 
 | 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, | 
 | 			V4L2_CID_SATURATION, 0, 255, 1, 128); | 
 | 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, | 
 | 			V4L2_CID_HUE, -128, 127, 1, 0); | 
 | 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, | 
 | 			V4L2_CID_PIXEL_RATE, 27000000, | 
 | 			27000000, 1, 27000000); | 
 | 	v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops, | 
 | 				     V4L2_CID_TEST_PATTERN, | 
 | 				     ARRAY_SIZE(tvp5150_test_patterns) - 1, | 
 | 				     0, 0, tvp5150_test_patterns); | 
 | 	sd->ctrl_handler = &core->hdl; | 
 | 	if (core->hdl.error) { | 
 | 		res = core->hdl.error; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	tvp5150_set_default(tvp5150_read_std(sd), &core->rect); | 
 |  | 
 | 	core->irq = c->irq; | 
 | 	tvp5150_reset(sd, 0);	/* Calls v4l2_ctrl_handler_setup() */ | 
 | 	if (c->irq) { | 
 | 		res = devm_request_threaded_irq(&c->dev, c->irq, NULL, | 
 | 						tvp5150_isr, IRQF_TRIGGER_HIGH | | 
 | 						IRQF_ONESHOT, "tvp5150", core); | 
 | 		if (res) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	res = v4l2_async_register_subdev(sd); | 
 | 	if (res < 0) | 
 | 		goto err; | 
 |  | 
 | 	if (debug > 1) | 
 | 		tvp5150_log_status(sd); | 
 |  | 
 | 	pm_runtime_set_active(&c->dev); | 
 | 	pm_runtime_enable(&c->dev); | 
 | 	pm_runtime_idle(&c->dev); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	v4l2_ctrl_handler_free(&core->hdl); | 
 | 	return res; | 
 | } | 
 |  | 
 | static int tvp5150_remove(struct i2c_client *c) | 
 | { | 
 | 	struct v4l2_subdev *sd = i2c_get_clientdata(c); | 
 | 	struct tvp5150 *decoder = to_tvp5150(sd); | 
 | 	unsigned int i; | 
 |  | 
 | 	dev_dbg_lvl(sd->dev, 1, debug, | 
 | 		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n", | 
 | 		c->addr << 1); | 
 |  | 
 | 	for (i = 0; i < decoder->connectors_num; i++) | 
 | 		v4l2_fwnode_connector_free(&decoder->connectors[i].base); | 
 | 	for (i = 0; i < decoder->connectors_num; i++) { | 
 | 		media_device_unregister_entity(&decoder->connectors[i].ent); | 
 | 		media_entity_cleanup(&decoder->connectors[i].ent); | 
 | 	} | 
 | 	v4l2_async_unregister_subdev(sd); | 
 | 	v4l2_ctrl_handler_free(&decoder->hdl); | 
 | 	pm_runtime_disable(&c->dev); | 
 | 	pm_runtime_set_suspended(&c->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------- */ | 
 |  | 
 | static const struct dev_pm_ops tvp5150_pm_ops = { | 
 | 	SET_RUNTIME_PM_OPS(tvp5150_runtime_suspend, | 
 | 			   tvp5150_runtime_resume, | 
 | 			   NULL) | 
 | }; | 
 |  | 
 | static const struct i2c_device_id tvp5150_id[] = { | 
 | 	{ "tvp5150", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, tvp5150_id); | 
 |  | 
 | #if IS_ENABLED(CONFIG_OF) | 
 | static const struct of_device_id tvp5150_of_match[] = { | 
 | 	{ .compatible = "ti,tvp5150", }, | 
 | 	{ /* sentinel */ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, tvp5150_of_match); | 
 | #endif | 
 |  | 
 | static struct i2c_driver tvp5150_driver = { | 
 | 	.driver = { | 
 | 		.of_match_table = of_match_ptr(tvp5150_of_match), | 
 | 		.name	= "tvp5150", | 
 | 		.pm	= &tvp5150_pm_ops, | 
 | 	}, | 
 | 	.probe_new	= tvp5150_probe, | 
 | 	.remove		= tvp5150_remove, | 
 | 	.id_table	= tvp5150_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(tvp5150_driver); |