| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Intel Transactional Synchronization Extensions (TSX) control. | |
| * | |
| * Copyright (C) 2019-2021 Intel Corporation | |
| * | |
| * Author: | |
| * Pawan Gupta <pawan.kumar.gupta@linux.intel.com> | |
| */ | |
| #include <linux/cpufeature.h> | |
| #include <asm/cmdline.h> | |
| #include "cpu.h" | |
| #undef pr_fmt | |
| #define pr_fmt(fmt) "tsx: " fmt | |
| enum tsx_ctrl_states tsx_ctrl_state __ro_after_init = TSX_CTRL_NOT_SUPPORTED; | |
| void tsx_disable(void) | |
| { | |
| u64 tsx; | |
| rdmsrl(MSR_IA32_TSX_CTRL, tsx); | |
| /* Force all transactions to immediately abort */ | |
| tsx |= TSX_CTRL_RTM_DISABLE; | |
| /* | |
| * Ensure TSX support is not enumerated in CPUID. | |
| * This is visible to userspace and will ensure they | |
| * do not waste resources trying TSX transactions that | |
| * will always abort. | |
| */ | |
| tsx |= TSX_CTRL_CPUID_CLEAR; | |
| wrmsrl(MSR_IA32_TSX_CTRL, tsx); | |
| } | |
| void tsx_enable(void) | |
| { | |
| u64 tsx; | |
| rdmsrl(MSR_IA32_TSX_CTRL, tsx); | |
| /* Enable the RTM feature in the cpu */ | |
| tsx &= ~TSX_CTRL_RTM_DISABLE; | |
| /* | |
| * Ensure TSX support is enumerated in CPUID. | |
| * This is visible to userspace and will ensure they | |
| * can enumerate and use the TSX feature. | |
| */ | |
| tsx &= ~TSX_CTRL_CPUID_CLEAR; | |
| wrmsrl(MSR_IA32_TSX_CTRL, tsx); | |
| } | |
| static bool __init tsx_ctrl_is_supported(void) | |
| { | |
| u64 ia32_cap = x86_read_arch_cap_msr(); | |
| /* | |
| * TSX is controlled via MSR_IA32_TSX_CTRL. However, support for this | |
| * MSR is enumerated by ARCH_CAP_TSX_MSR bit in MSR_IA32_ARCH_CAPABILITIES. | |
| * | |
| * TSX control (aka MSR_IA32_TSX_CTRL) is only available after a | |
| * microcode update on CPUs that have their MSR_IA32_ARCH_CAPABILITIES | |
| * bit MDS_NO=1. CPUs with MDS_NO=0 are not planned to get | |
| * MSR_IA32_TSX_CTRL support even after a microcode update. Thus, | |
| * tsx= cmdline requests will do nothing on CPUs without | |
| * MSR_IA32_TSX_CTRL support. | |
| */ | |
| return !!(ia32_cap & ARCH_CAP_TSX_CTRL_MSR); | |
| } | |
| static enum tsx_ctrl_states x86_get_tsx_auto_mode(void) | |
| { | |
| if (boot_cpu_has_bug(X86_BUG_TAA)) | |
| return TSX_CTRL_DISABLE; | |
| return TSX_CTRL_ENABLE; | |
| } | |
| void tsx_clear_cpuid(void) | |
| { | |
| u64 msr; | |
| /* | |
| * MSR_TFA_TSX_CPUID_CLEAR bit is only present when both CPUID | |
| * bits RTM_ALWAYS_ABORT and TSX_FORCE_ABORT are present. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT) && | |
| boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) { | |
| rdmsrl(MSR_TSX_FORCE_ABORT, msr); | |
| msr |= MSR_TFA_TSX_CPUID_CLEAR; | |
| wrmsrl(MSR_TSX_FORCE_ABORT, msr); | |
| } | |
| } | |
| void __init tsx_init(void) | |
| { | |
| char arg[5] = {}; | |
| int ret; | |
| /* | |
| * Hardware will always abort a TSX transaction if both CPUID bits | |
| * RTM_ALWAYS_ABORT and TSX_FORCE_ABORT are set. In this case, it is | |
| * better not to enumerate CPUID.RTM and CPUID.HLE bits. Clear them | |
| * here. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT) && | |
| boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) { | |
| tsx_ctrl_state = TSX_CTRL_RTM_ALWAYS_ABORT; | |
| tsx_clear_cpuid(); | |
| setup_clear_cpu_cap(X86_FEATURE_RTM); | |
| setup_clear_cpu_cap(X86_FEATURE_HLE); | |
| return; | |
| } | |
| if (!tsx_ctrl_is_supported()) { | |
| tsx_ctrl_state = TSX_CTRL_NOT_SUPPORTED; | |
| return; | |
| } | |
| ret = cmdline_find_option(boot_command_line, "tsx", arg, sizeof(arg)); | |
| if (ret >= 0) { | |
| if (!strcmp(arg, "on")) { | |
| tsx_ctrl_state = TSX_CTRL_ENABLE; | |
| } else if (!strcmp(arg, "off")) { | |
| tsx_ctrl_state = TSX_CTRL_DISABLE; | |
| } else if (!strcmp(arg, "auto")) { | |
| tsx_ctrl_state = x86_get_tsx_auto_mode(); | |
| } else { | |
| tsx_ctrl_state = TSX_CTRL_DISABLE; | |
| pr_err("invalid option, defaulting to off\n"); | |
| } | |
| } else { | |
| /* tsx= not provided */ | |
| if (IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_AUTO)) | |
| tsx_ctrl_state = x86_get_tsx_auto_mode(); | |
| else if (IS_ENABLED(CONFIG_X86_INTEL_TSX_MODE_OFF)) | |
| tsx_ctrl_state = TSX_CTRL_DISABLE; | |
| else | |
| tsx_ctrl_state = TSX_CTRL_ENABLE; | |
| } | |
| if (tsx_ctrl_state == TSX_CTRL_DISABLE) { | |
| tsx_disable(); | |
| /* | |
| * tsx_disable() will change the state of the RTM and HLE CPUID | |
| * bits. Clear them here since they are now expected to be not | |
| * set. | |
| */ | |
| setup_clear_cpu_cap(X86_FEATURE_RTM); | |
| setup_clear_cpu_cap(X86_FEATURE_HLE); | |
| } else if (tsx_ctrl_state == TSX_CTRL_ENABLE) { | |
| /* | |
| * HW defaults TSX to be enabled at bootup. | |
| * We may still need the TSX enable support | |
| * during init for special cases like | |
| * kexec after TSX is disabled. | |
| */ | |
| tsx_enable(); | |
| /* | |
| * tsx_enable() will change the state of the RTM and HLE CPUID | |
| * bits. Force them here since they are now expected to be set. | |
| */ | |
| setup_force_cpu_cap(X86_FEATURE_RTM); | |
| setup_force_cpu_cap(X86_FEATURE_HLE); | |
| } | |
| } |