| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2017 Oracle. All Rights Reserved. | |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> | |
| */ | |
| #include "xfs.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_btree.h" | |
| #include "xfs_rmap.h" | |
| #include "xfs_refcount.h" | |
| #include "scrub/scrub.h" | |
| #include "scrub/common.h" | |
| #include "scrub/btree.h" | |
| #include "xfs_ag.h" | |
| /* | |
| * Set us up to scrub reference count btrees. | |
| */ | |
| int | |
| xchk_setup_ag_refcountbt( | |
| struct xfs_scrub *sc) | |
| { | |
| return xchk_setup_ag_btree(sc, false); | |
| } | |
| /* Reference count btree scrubber. */ | |
| /* | |
| * Confirming Reference Counts via Reverse Mappings | |
| * | |
| * We want to count the reverse mappings overlapping a refcount record | |
| * (bno, len, refcount), allowing for the possibility that some of the | |
| * overlap may come from smaller adjoining reverse mappings, while some | |
| * comes from single extents which overlap the range entirely. The | |
| * outer loop is as follows: | |
| * | |
| * 1. For all reverse mappings overlapping the refcount extent, | |
| * a. If a given rmap completely overlaps, mark it as seen. | |
| * b. Otherwise, record the fragment (in agbno order) for later | |
| * processing. | |
| * | |
| * Once we've seen all the rmaps, we know that for all blocks in the | |
| * refcount record we want to find $refcount owners and we've already | |
| * visited $seen extents that overlap all the blocks. Therefore, we | |
| * need to find ($refcount - $seen) owners for every block in the | |
| * extent; call that quantity $target_nr. Proceed as follows: | |
| * | |
| * 2. Pull the first $target_nr fragments from the list; all of them | |
| * should start at or before the start of the extent. | |
| * Call this subset of fragments the working set. | |
| * 3. Until there are no more unprocessed fragments, | |
| * a. Find the shortest fragments in the set and remove them. | |
| * b. Note the block number of the end of these fragments. | |
| * c. Pull the same number of fragments from the list. All of these | |
| * fragments should start at the block number recorded in the | |
| * previous step. | |
| * d. Put those fragments in the set. | |
| * 4. Check that there are $target_nr fragments remaining in the list, | |
| * and that they all end at or beyond the end of the refcount extent. | |
| * | |
| * If the refcount is correct, all the check conditions in the algorithm | |
| * should always hold true. If not, the refcount is incorrect. | |
| */ | |
| struct xchk_refcnt_frag { | |
| struct list_head list; | |
| struct xfs_rmap_irec rm; | |
| }; | |
| struct xchk_refcnt_check { | |
| struct xfs_scrub *sc; | |
| struct list_head fragments; | |
| /* refcount extent we're examining */ | |
| xfs_agblock_t bno; | |
| xfs_extlen_t len; | |
| xfs_nlink_t refcount; | |
| /* number of owners seen */ | |
| xfs_nlink_t seen; | |
| }; | |
| /* | |
| * Decide if the given rmap is large enough that we can redeem it | |
| * towards refcount verification now, or if it's a fragment, in | |
| * which case we'll hang onto it in the hopes that we'll later | |
| * discover that we've collected exactly the correct number of | |
| * fragments as the refcountbt says we should have. | |
| */ | |
| STATIC int | |
| xchk_refcountbt_rmap_check( | |
| struct xfs_btree_cur *cur, | |
| const struct xfs_rmap_irec *rec, | |
| void *priv) | |
| { | |
| struct xchk_refcnt_check *refchk = priv; | |
| struct xchk_refcnt_frag *frag; | |
| xfs_agblock_t rm_last; | |
| xfs_agblock_t rc_last; | |
| int error = 0; | |
| if (xchk_should_terminate(refchk->sc, &error)) | |
| return error; | |
| rm_last = rec->rm_startblock + rec->rm_blockcount - 1; | |
| rc_last = refchk->bno + refchk->len - 1; | |
| /* Confirm that a single-owner refc extent is a CoW stage. */ | |
| if (refchk->refcount == 1 && rec->rm_owner != XFS_RMAP_OWN_COW) { | |
| xchk_btree_xref_set_corrupt(refchk->sc, cur, 0); | |
| return 0; | |
| } | |
| if (rec->rm_startblock <= refchk->bno && rm_last >= rc_last) { | |
| /* | |
| * The rmap overlaps the refcount record, so we can confirm | |
| * one refcount owner seen. | |
| */ | |
| refchk->seen++; | |
| } else { | |
| /* | |
| * This rmap covers only part of the refcount record, so | |
| * save the fragment for later processing. If the rmapbt | |
| * is healthy each rmap_irec we see will be in agbno order | |
| * so we don't need insertion sort here. | |
| */ | |
| frag = kmem_alloc(sizeof(struct xchk_refcnt_frag), | |
| KM_MAYFAIL); | |
| if (!frag) | |
| return -ENOMEM; | |
| memcpy(&frag->rm, rec, sizeof(frag->rm)); | |
| list_add_tail(&frag->list, &refchk->fragments); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Given a bunch of rmap fragments, iterate through them, keeping | |
| * a running tally of the refcount. If this ever deviates from | |
| * what we expect (which is the refcountbt's refcount minus the | |
| * number of extents that totally covered the refcountbt extent), | |
| * we have a refcountbt error. | |
| */ | |
| STATIC void | |
| xchk_refcountbt_process_rmap_fragments( | |
| struct xchk_refcnt_check *refchk) | |
| { | |
| struct list_head worklist; | |
| struct xchk_refcnt_frag *frag; | |
| struct xchk_refcnt_frag *n; | |
| xfs_agblock_t bno; | |
| xfs_agblock_t rbno; | |
| xfs_agblock_t next_rbno; | |
| xfs_nlink_t nr; | |
| xfs_nlink_t target_nr; | |
| target_nr = refchk->refcount - refchk->seen; | |
| if (target_nr == 0) | |
| return; | |
| /* | |
| * There are (refchk->rc.rc_refcount - refchk->nr refcount) | |
| * references we haven't found yet. Pull that many off the | |
| * fragment list and figure out where the smallest rmap ends | |
| * (and therefore the next rmap should start). All the rmaps | |
| * we pull off should start at or before the beginning of the | |
| * refcount record's range. | |
| */ | |
| INIT_LIST_HEAD(&worklist); | |
| rbno = NULLAGBLOCK; | |
| /* Make sure the fragments actually /are/ in agbno order. */ | |
| bno = 0; | |
| list_for_each_entry(frag, &refchk->fragments, list) { | |
| if (frag->rm.rm_startblock < bno) | |
| goto done; | |
| bno = frag->rm.rm_startblock; | |
| } | |
| /* | |
| * Find all the rmaps that start at or before the refc extent, | |
| * and put them on the worklist. | |
| */ | |
| nr = 0; | |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { | |
| if (frag->rm.rm_startblock > refchk->bno || nr > target_nr) | |
| break; | |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; | |
| if (bno < rbno) | |
| rbno = bno; | |
| list_move_tail(&frag->list, &worklist); | |
| nr++; | |
| } | |
| /* | |
| * We should have found exactly $target_nr rmap fragments starting | |
| * at or before the refcount extent. | |
| */ | |
| if (nr != target_nr) | |
| goto done; | |
| while (!list_empty(&refchk->fragments)) { | |
| /* Discard any fragments ending at rbno from the worklist. */ | |
| nr = 0; | |
| next_rbno = NULLAGBLOCK; | |
| list_for_each_entry_safe(frag, n, &worklist, list) { | |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; | |
| if (bno != rbno) { | |
| if (bno < next_rbno) | |
| next_rbno = bno; | |
| continue; | |
| } | |
| list_del(&frag->list); | |
| kmem_free(frag); | |
| nr++; | |
| } | |
| /* Try to add nr rmaps starting at rbno to the worklist. */ | |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { | |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; | |
| if (frag->rm.rm_startblock != rbno) | |
| goto done; | |
| list_move_tail(&frag->list, &worklist); | |
| if (next_rbno > bno) | |
| next_rbno = bno; | |
| nr--; | |
| if (nr == 0) | |
| break; | |
| } | |
| /* | |
| * If we get here and nr > 0, this means that we added fewer | |
| * items to the worklist than we discarded because the fragment | |
| * list ran out of items. Therefore, we cannot maintain the | |
| * required refcount. Something is wrong, so we're done. | |
| */ | |
| if (nr) | |
| goto done; | |
| rbno = next_rbno; | |
| } | |
| /* | |
| * Make sure the last extent we processed ends at or beyond | |
| * the end of the refcount extent. | |
| */ | |
| if (rbno < refchk->bno + refchk->len) | |
| goto done; | |
| /* Actually record us having seen the remaining refcount. */ | |
| refchk->seen = refchk->refcount; | |
| done: | |
| /* Delete fragments and work list. */ | |
| list_for_each_entry_safe(frag, n, &worklist, list) { | |
| list_del(&frag->list); | |
| kmem_free(frag); | |
| } | |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { | |
| list_del(&frag->list); | |
| kmem_free(frag); | |
| } | |
| } | |
| /* Use the rmap entries covering this extent to verify the refcount. */ | |
| STATIC void | |
| xchk_refcountbt_xref_rmap( | |
| struct xfs_scrub *sc, | |
| xfs_agblock_t bno, | |
| xfs_extlen_t len, | |
| xfs_nlink_t refcount) | |
| { | |
| struct xchk_refcnt_check refchk = { | |
| .sc = sc, | |
| .bno = bno, | |
| .len = len, | |
| .refcount = refcount, | |
| .seen = 0, | |
| }; | |
| struct xfs_rmap_irec low; | |
| struct xfs_rmap_irec high; | |
| struct xchk_refcnt_frag *frag; | |
| struct xchk_refcnt_frag *n; | |
| int error; | |
| if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm)) | |
| return; | |
| /* Cross-reference with the rmapbt to confirm the refcount. */ | |
| memset(&low, 0, sizeof(low)); | |
| low.rm_startblock = bno; | |
| memset(&high, 0xFF, sizeof(high)); | |
| high.rm_startblock = bno + len - 1; | |
| INIT_LIST_HEAD(&refchk.fragments); | |
| error = xfs_rmap_query_range(sc->sa.rmap_cur, &low, &high, | |
| &xchk_refcountbt_rmap_check, &refchk); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) | |
| goto out_free; | |
| xchk_refcountbt_process_rmap_fragments(&refchk); | |
| if (refcount != refchk.seen) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); | |
| out_free: | |
| list_for_each_entry_safe(frag, n, &refchk.fragments, list) { | |
| list_del(&frag->list); | |
| kmem_free(frag); | |
| } | |
| } | |
| /* Cross-reference with the other btrees. */ | |
| STATIC void | |
| xchk_refcountbt_xref( | |
| struct xfs_scrub *sc, | |
| xfs_agblock_t agbno, | |
| xfs_extlen_t len, | |
| xfs_nlink_t refcount) | |
| { | |
| if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT) | |
| return; | |
| xchk_xref_is_used_space(sc, agbno, len); | |
| xchk_xref_is_not_inode_chunk(sc, agbno, len); | |
| xchk_refcountbt_xref_rmap(sc, agbno, len, refcount); | |
| } | |
| /* Scrub a refcountbt record. */ | |
| STATIC int | |
| xchk_refcountbt_rec( | |
| struct xchk_btree *bs, | |
| const union xfs_btree_rec *rec) | |
| { | |
| struct xfs_mount *mp = bs->cur->bc_mp; | |
| xfs_agblock_t *cow_blocks = bs->private; | |
| xfs_agnumber_t agno = bs->cur->bc_ag.pag->pag_agno; | |
| xfs_agblock_t bno; | |
| xfs_extlen_t len; | |
| xfs_nlink_t refcount; | |
| bool has_cowflag; | |
| bno = be32_to_cpu(rec->refc.rc_startblock); | |
| len = be32_to_cpu(rec->refc.rc_blockcount); | |
| refcount = be32_to_cpu(rec->refc.rc_refcount); | |
| /* Only CoW records can have refcount == 1. */ | |
| has_cowflag = (bno & XFS_REFC_COW_START); | |
| if ((refcount == 1 && !has_cowflag) || (refcount != 1 && has_cowflag)) | |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); | |
| if (has_cowflag) | |
| (*cow_blocks) += len; | |
| /* Check the extent. */ | |
| bno &= ~XFS_REFC_COW_START; | |
| if (bno + len <= bno || | |
| !xfs_verify_agbno(mp, agno, bno) || | |
| !xfs_verify_agbno(mp, agno, bno + len - 1)) | |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); | |
| if (refcount == 0) | |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); | |
| xchk_refcountbt_xref(bs->sc, bno, len, refcount); | |
| return 0; | |
| } | |
| /* Make sure we have as many refc blocks as the rmap says. */ | |
| STATIC void | |
| xchk_refcount_xref_rmap( | |
| struct xfs_scrub *sc, | |
| xfs_filblks_t cow_blocks) | |
| { | |
| xfs_extlen_t refcbt_blocks = 0; | |
| xfs_filblks_t blocks; | |
| int error; | |
| if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm)) | |
| return; | |
| /* Check that we saw as many refcbt blocks as the rmap knows about. */ | |
| error = xfs_btree_count_blocks(sc->sa.refc_cur, &refcbt_blocks); | |
| if (!xchk_btree_process_error(sc, sc->sa.refc_cur, 0, &error)) | |
| return; | |
| error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur, | |
| &XFS_RMAP_OINFO_REFC, &blocks); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) | |
| return; | |
| if (blocks != refcbt_blocks) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); | |
| /* Check that we saw as many cow blocks as the rmap knows about. */ | |
| error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur, | |
| &XFS_RMAP_OINFO_COW, &blocks); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) | |
| return; | |
| if (blocks != cow_blocks) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); | |
| } | |
| /* Scrub the refcount btree for some AG. */ | |
| int | |
| xchk_refcountbt( | |
| struct xfs_scrub *sc) | |
| { | |
| xfs_agblock_t cow_blocks = 0; | |
| int error; | |
| error = xchk_btree(sc, sc->sa.refc_cur, xchk_refcountbt_rec, | |
| &XFS_RMAP_OINFO_REFC, &cow_blocks); | |
| if (error) | |
| return error; | |
| xchk_refcount_xref_rmap(sc, cow_blocks); | |
| return 0; | |
| } | |
| /* xref check that a cow staging extent is marked in the refcountbt. */ | |
| void | |
| xchk_xref_is_cow_staging( | |
| struct xfs_scrub *sc, | |
| xfs_agblock_t agbno, | |
| xfs_extlen_t len) | |
| { | |
| struct xfs_refcount_irec rc; | |
| bool has_cowflag; | |
| int has_refcount; | |
| int error; | |
| if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm)) | |
| return; | |
| /* Find the CoW staging extent. */ | |
| error = xfs_refcount_lookup_le(sc->sa.refc_cur, | |
| agbno + XFS_REFC_COW_START, &has_refcount); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) | |
| return; | |
| if (!has_refcount) { | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); | |
| return; | |
| } | |
| error = xfs_refcount_get_rec(sc->sa.refc_cur, &rc, &has_refcount); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) | |
| return; | |
| if (!has_refcount) { | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); | |
| return; | |
| } | |
| /* CoW flag must be set, refcount must be 1. */ | |
| has_cowflag = (rc.rc_startblock & XFS_REFC_COW_START); | |
| if (!has_cowflag || rc.rc_refcount != 1) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); | |
| /* Must be at least as long as what was passed in */ | |
| if (rc.rc_blockcount < len) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); | |
| } | |
| /* | |
| * xref check that the extent is not shared. Only file data blocks | |
| * can have multiple owners. | |
| */ | |
| void | |
| xchk_xref_is_not_shared( | |
| struct xfs_scrub *sc, | |
| xfs_agblock_t agbno, | |
| xfs_extlen_t len) | |
| { | |
| bool shared; | |
| int error; | |
| if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm)) | |
| return; | |
| error = xfs_refcount_has_record(sc->sa.refc_cur, agbno, len, &shared); | |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) | |
| return; | |
| if (shared) | |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); | |
| } |