| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/arch/arm/mach-omap1/clock.c | |
| * | |
| * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation | |
| * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> | |
| * | |
| * Modified to use omap shared clock framework by | |
| * Tony Lindgren <tony@atomide.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/export.h> | |
| #include <linux/list.h> | |
| #include <linux/errno.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/clkdev.h> | |
| #include <asm/mach-types.h> | |
| #include <mach/hardware.h> | |
| #include "soc.h" | |
| #include "iomap.h" | |
| #include "clock.h" | |
| #include "opp.h" | |
| #include "sram.h" | |
| __u32 arm_idlect1_mask; | |
| struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; | |
| static LIST_HEAD(clocks); | |
| static DEFINE_MUTEX(clocks_mutex); | |
| static DEFINE_SPINLOCK(clockfw_lock); | |
| /* | |
| * Omap1 specific clock functions | |
| */ | |
| unsigned long omap1_uart_recalc(struct clk *clk) | |
| { | |
| unsigned int val = __raw_readl(clk->enable_reg); | |
| return val & clk->enable_bit ? 48000000 : 12000000; | |
| } | |
| unsigned long omap1_sossi_recalc(struct clk *clk) | |
| { | |
| u32 div = omap_readl(MOD_CONF_CTRL_1); | |
| div = (div >> 17) & 0x7; | |
| div++; | |
| return clk->parent->rate / div; | |
| } | |
| static void omap1_clk_allow_idle(struct clk *clk) | |
| { | |
| struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; | |
| if (!(clk->flags & CLOCK_IDLE_CONTROL)) | |
| return; | |
| if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) | |
| arm_idlect1_mask |= 1 << iclk->idlect_shift; | |
| } | |
| static void omap1_clk_deny_idle(struct clk *clk) | |
| { | |
| struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; | |
| if (!(clk->flags & CLOCK_IDLE_CONTROL)) | |
| return; | |
| if (iclk->no_idle_count++ == 0) | |
| arm_idlect1_mask &= ~(1 << iclk->idlect_shift); | |
| } | |
| static __u16 verify_ckctl_value(__u16 newval) | |
| { | |
| /* This function checks for following limitations set | |
| * by the hardware (all conditions must be true): | |
| * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 | |
| * ARM_CK >= TC_CK | |
| * DSP_CK >= TC_CK | |
| * DSPMMU_CK >= TC_CK | |
| * | |
| * In addition following rules are enforced: | |
| * LCD_CK <= TC_CK | |
| * ARMPER_CK <= TC_CK | |
| * | |
| * However, maximum frequencies are not checked for! | |
| */ | |
| __u8 per_exp; | |
| __u8 lcd_exp; | |
| __u8 arm_exp; | |
| __u8 dsp_exp; | |
| __u8 tc_exp; | |
| __u8 dspmmu_exp; | |
| per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; | |
| lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; | |
| arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; | |
| dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; | |
| tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; | |
| dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; | |
| if (dspmmu_exp < dsp_exp) | |
| dspmmu_exp = dsp_exp; | |
| if (dspmmu_exp > dsp_exp+1) | |
| dspmmu_exp = dsp_exp+1; | |
| if (tc_exp < arm_exp) | |
| tc_exp = arm_exp; | |
| if (tc_exp < dspmmu_exp) | |
| tc_exp = dspmmu_exp; | |
| if (tc_exp > lcd_exp) | |
| lcd_exp = tc_exp; | |
| if (tc_exp > per_exp) | |
| per_exp = tc_exp; | |
| newval &= 0xf000; | |
| newval |= per_exp << CKCTL_PERDIV_OFFSET; | |
| newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; | |
| newval |= arm_exp << CKCTL_ARMDIV_OFFSET; | |
| newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; | |
| newval |= tc_exp << CKCTL_TCDIV_OFFSET; | |
| newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; | |
| return newval; | |
| } | |
| static int calc_dsor_exp(struct clk *clk, unsigned long rate) | |
| { | |
| /* Note: If target frequency is too low, this function will return 4, | |
| * which is invalid value. Caller must check for this value and act | |
| * accordingly. | |
| * | |
| * Note: This function does not check for following limitations set | |
| * by the hardware (all conditions must be true): | |
| * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 | |
| * ARM_CK >= TC_CK | |
| * DSP_CK >= TC_CK | |
| * DSPMMU_CK >= TC_CK | |
| */ | |
| unsigned long realrate; | |
| struct clk * parent; | |
| unsigned dsor_exp; | |
| parent = clk->parent; | |
| if (unlikely(parent == NULL)) | |
| return -EIO; | |
| realrate = parent->rate; | |
| for (dsor_exp=0; dsor_exp<4; dsor_exp++) { | |
| if (realrate <= rate) | |
| break; | |
| realrate /= 2; | |
| } | |
| return dsor_exp; | |
| } | |
| unsigned long omap1_ckctl_recalc(struct clk *clk) | |
| { | |
| /* Calculate divisor encoded as 2-bit exponent */ | |
| int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); | |
| return clk->parent->rate / dsor; | |
| } | |
| unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) | |
| { | |
| int dsor; | |
| /* Calculate divisor encoded as 2-bit exponent | |
| * | |
| * The clock control bits are in DSP domain, | |
| * so api_ck is needed for access. | |
| * Note that DSP_CKCTL virt addr = phys addr, so | |
| * we must use __raw_readw() instead of omap_readw(). | |
| */ | |
| omap1_clk_enable(api_ck_p); | |
| dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); | |
| omap1_clk_disable(api_ck_p); | |
| return clk->parent->rate / dsor; | |
| } | |
| /* MPU virtual clock functions */ | |
| int omap1_select_table_rate(struct clk *clk, unsigned long rate) | |
| { | |
| /* Find the highest supported frequency <= rate and switch to it */ | |
| struct mpu_rate * ptr; | |
| unsigned long ref_rate; | |
| ref_rate = ck_ref_p->rate; | |
| for (ptr = omap1_rate_table; ptr->rate; ptr++) { | |
| if (!(ptr->flags & cpu_mask)) | |
| continue; | |
| if (ptr->xtal != ref_rate) | |
| continue; | |
| /* Can check only after xtal frequency check */ | |
| if (ptr->rate <= rate) | |
| break; | |
| } | |
| if (!ptr->rate) | |
| return -EINVAL; | |
| /* | |
| * In most cases we should not need to reprogram DPLL. | |
| * Reprogramming the DPLL is tricky, it must be done from SRAM. | |
| */ | |
| omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); | |
| /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ | |
| ck_dpll1_p->rate = ptr->pll_rate; | |
| return 0; | |
| } | |
| int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) | |
| { | |
| int dsor_exp; | |
| u16 regval; | |
| dsor_exp = calc_dsor_exp(clk, rate); | |
| if (dsor_exp > 3) | |
| dsor_exp = -EINVAL; | |
| if (dsor_exp < 0) | |
| return dsor_exp; | |
| regval = __raw_readw(DSP_CKCTL); | |
| regval &= ~(3 << clk->rate_offset); | |
| regval |= dsor_exp << clk->rate_offset; | |
| __raw_writew(regval, DSP_CKCTL); | |
| clk->rate = clk->parent->rate / (1 << dsor_exp); | |
| return 0; | |
| } | |
| long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) | |
| { | |
| int dsor_exp = calc_dsor_exp(clk, rate); | |
| if (dsor_exp < 0) | |
| return dsor_exp; | |
| if (dsor_exp > 3) | |
| dsor_exp = 3; | |
| return clk->parent->rate / (1 << dsor_exp); | |
| } | |
| int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) | |
| { | |
| int dsor_exp; | |
| u16 regval; | |
| dsor_exp = calc_dsor_exp(clk, rate); | |
| if (dsor_exp > 3) | |
| dsor_exp = -EINVAL; | |
| if (dsor_exp < 0) | |
| return dsor_exp; | |
| regval = omap_readw(ARM_CKCTL); | |
| regval &= ~(3 << clk->rate_offset); | |
| regval |= dsor_exp << clk->rate_offset; | |
| regval = verify_ckctl_value(regval); | |
| omap_writew(regval, ARM_CKCTL); | |
| clk->rate = clk->parent->rate / (1 << dsor_exp); | |
| return 0; | |
| } | |
| long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) | |
| { | |
| /* Find the highest supported frequency <= rate */ | |
| struct mpu_rate * ptr; | |
| long highest_rate; | |
| unsigned long ref_rate; | |
| ref_rate = ck_ref_p->rate; | |
| highest_rate = -EINVAL; | |
| for (ptr = omap1_rate_table; ptr->rate; ptr++) { | |
| if (!(ptr->flags & cpu_mask)) | |
| continue; | |
| if (ptr->xtal != ref_rate) | |
| continue; | |
| highest_rate = ptr->rate; | |
| /* Can check only after xtal frequency check */ | |
| if (ptr->rate <= rate) | |
| break; | |
| } | |
| return highest_rate; | |
| } | |
| static unsigned calc_ext_dsor(unsigned long rate) | |
| { | |
| unsigned dsor; | |
| /* MCLK and BCLK divisor selection is not linear: | |
| * freq = 96MHz / dsor | |
| * | |
| * RATIO_SEL range: dsor <-> RATIO_SEL | |
| * 0..6: (RATIO_SEL+2) <-> (dsor-2) | |
| * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) | |
| * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 | |
| * can not be used. | |
| */ | |
| for (dsor = 2; dsor < 96; ++dsor) { | |
| if ((dsor & 1) && dsor > 8) | |
| continue; | |
| if (rate >= 96000000 / dsor) | |
| break; | |
| } | |
| return dsor; | |
| } | |
| /* XXX Only needed on 1510 */ | |
| int omap1_set_uart_rate(struct clk *clk, unsigned long rate) | |
| { | |
| unsigned int val; | |
| val = __raw_readl(clk->enable_reg); | |
| if (rate == 12000000) | |
| val &= ~(1 << clk->enable_bit); | |
| else if (rate == 48000000) | |
| val |= (1 << clk->enable_bit); | |
| else | |
| return -EINVAL; | |
| __raw_writel(val, clk->enable_reg); | |
| clk->rate = rate; | |
| return 0; | |
| } | |
| /* External clock (MCLK & BCLK) functions */ | |
| int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) | |
| { | |
| unsigned dsor; | |
| __u16 ratio_bits; | |
| dsor = calc_ext_dsor(rate); | |
| clk->rate = 96000000 / dsor; | |
| if (dsor > 8) | |
| ratio_bits = ((dsor - 8) / 2 + 6) << 2; | |
| else | |
| ratio_bits = (dsor - 2) << 2; | |
| ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; | |
| __raw_writew(ratio_bits, clk->enable_reg); | |
| return 0; | |
| } | |
| int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) | |
| { | |
| u32 l; | |
| int div; | |
| unsigned long p_rate; | |
| p_rate = clk->parent->rate; | |
| /* Round towards slower frequency */ | |
| div = (p_rate + rate - 1) / rate; | |
| div--; | |
| if (div < 0 || div > 7) | |
| return -EINVAL; | |
| l = omap_readl(MOD_CONF_CTRL_1); | |
| l &= ~(7 << 17); | |
| l |= div << 17; | |
| omap_writel(l, MOD_CONF_CTRL_1); | |
| clk->rate = p_rate / (div + 1); | |
| return 0; | |
| } | |
| long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) | |
| { | |
| return 96000000 / calc_ext_dsor(rate); | |
| } | |
| void omap1_init_ext_clk(struct clk *clk) | |
| { | |
| unsigned dsor; | |
| __u16 ratio_bits; | |
| /* Determine current rate and ensure clock is based on 96MHz APLL */ | |
| ratio_bits = __raw_readw(clk->enable_reg) & ~1; | |
| __raw_writew(ratio_bits, clk->enable_reg); | |
| ratio_bits = (ratio_bits & 0xfc) >> 2; | |
| if (ratio_bits > 6) | |
| dsor = (ratio_bits - 6) * 2 + 8; | |
| else | |
| dsor = ratio_bits + 2; | |
| clk-> rate = 96000000 / dsor; | |
| } | |
| int omap1_clk_enable(struct clk *clk) | |
| { | |
| int ret = 0; | |
| if (clk->usecount++ == 0) { | |
| if (clk->parent) { | |
| ret = omap1_clk_enable(clk->parent); | |
| if (ret) | |
| goto err; | |
| if (clk->flags & CLOCK_NO_IDLE_PARENT) | |
| omap1_clk_deny_idle(clk->parent); | |
| } | |
| ret = clk->ops->enable(clk); | |
| if (ret) { | |
| if (clk->parent) | |
| omap1_clk_disable(clk->parent); | |
| goto err; | |
| } | |
| } | |
| return ret; | |
| err: | |
| clk->usecount--; | |
| return ret; | |
| } | |
| void omap1_clk_disable(struct clk *clk) | |
| { | |
| if (clk->usecount > 0 && !(--clk->usecount)) { | |
| clk->ops->disable(clk); | |
| if (likely(clk->parent)) { | |
| omap1_clk_disable(clk->parent); | |
| if (clk->flags & CLOCK_NO_IDLE_PARENT) | |
| omap1_clk_allow_idle(clk->parent); | |
| } | |
| } | |
| } | |
| static int omap1_clk_enable_generic(struct clk *clk) | |
| { | |
| __u16 regval16; | |
| __u32 regval32; | |
| if (unlikely(clk->enable_reg == NULL)) { | |
| printk(KERN_ERR "clock.c: Enable for %s without enable code\n", | |
| clk->name); | |
| return -EINVAL; | |
| } | |
| if (clk->flags & ENABLE_REG_32BIT) { | |
| regval32 = __raw_readl(clk->enable_reg); | |
| regval32 |= (1 << clk->enable_bit); | |
| __raw_writel(regval32, clk->enable_reg); | |
| } else { | |
| regval16 = __raw_readw(clk->enable_reg); | |
| regval16 |= (1 << clk->enable_bit); | |
| __raw_writew(regval16, clk->enable_reg); | |
| } | |
| return 0; | |
| } | |
| static void omap1_clk_disable_generic(struct clk *clk) | |
| { | |
| __u16 regval16; | |
| __u32 regval32; | |
| if (clk->enable_reg == NULL) | |
| return; | |
| if (clk->flags & ENABLE_REG_32BIT) { | |
| regval32 = __raw_readl(clk->enable_reg); | |
| regval32 &= ~(1 << clk->enable_bit); | |
| __raw_writel(regval32, clk->enable_reg); | |
| } else { | |
| regval16 = __raw_readw(clk->enable_reg); | |
| regval16 &= ~(1 << clk->enable_bit); | |
| __raw_writew(regval16, clk->enable_reg); | |
| } | |
| } | |
| const struct clkops clkops_generic = { | |
| .enable = omap1_clk_enable_generic, | |
| .disable = omap1_clk_disable_generic, | |
| }; | |
| static int omap1_clk_enable_dsp_domain(struct clk *clk) | |
| { | |
| int retval; | |
| retval = omap1_clk_enable(api_ck_p); | |
| if (!retval) { | |
| retval = omap1_clk_enable_generic(clk); | |
| omap1_clk_disable(api_ck_p); | |
| } | |
| return retval; | |
| } | |
| static void omap1_clk_disable_dsp_domain(struct clk *clk) | |
| { | |
| if (omap1_clk_enable(api_ck_p) == 0) { | |
| omap1_clk_disable_generic(clk); | |
| omap1_clk_disable(api_ck_p); | |
| } | |
| } | |
| const struct clkops clkops_dspck = { | |
| .enable = omap1_clk_enable_dsp_domain, | |
| .disable = omap1_clk_disable_dsp_domain, | |
| }; | |
| /* XXX SYSC register handling does not belong in the clock framework */ | |
| static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) | |
| { | |
| int ret; | |
| struct uart_clk *uclk; | |
| ret = omap1_clk_enable_generic(clk); | |
| if (ret == 0) { | |
| /* Set smart idle acknowledgement mode */ | |
| uclk = (struct uart_clk *)clk; | |
| omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, | |
| uclk->sysc_addr); | |
| } | |
| return ret; | |
| } | |
| /* XXX SYSC register handling does not belong in the clock framework */ | |
| static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) | |
| { | |
| struct uart_clk *uclk; | |
| /* Set force idle acknowledgement mode */ | |
| uclk = (struct uart_clk *)clk; | |
| omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); | |
| omap1_clk_disable_generic(clk); | |
| } | |
| /* XXX SYSC register handling does not belong in the clock framework */ | |
| const struct clkops clkops_uart_16xx = { | |
| .enable = omap1_clk_enable_uart_functional_16xx, | |
| .disable = omap1_clk_disable_uart_functional_16xx, | |
| }; | |
| long omap1_clk_round_rate(struct clk *clk, unsigned long rate) | |
| { | |
| if (clk->round_rate != NULL) | |
| return clk->round_rate(clk, rate); | |
| return clk->rate; | |
| } | |
| int omap1_clk_set_rate(struct clk *clk, unsigned long rate) | |
| { | |
| int ret = -EINVAL; | |
| if (clk->set_rate) | |
| ret = clk->set_rate(clk, rate); | |
| return ret; | |
| } | |
| /* | |
| * Omap1 clock reset and init functions | |
| */ | |
| #ifdef CONFIG_OMAP_RESET_CLOCKS | |
| void omap1_clk_disable_unused(struct clk *clk) | |
| { | |
| __u32 regval32; | |
| /* Clocks in the DSP domain need api_ck. Just assume bootloader | |
| * has not enabled any DSP clocks */ | |
| if (clk->enable_reg == DSP_IDLECT2) { | |
| pr_info("Skipping reset check for DSP domain clock \"%s\"\n", | |
| clk->name); | |
| return; | |
| } | |
| /* Is the clock already disabled? */ | |
| if (clk->flags & ENABLE_REG_32BIT) | |
| regval32 = __raw_readl(clk->enable_reg); | |
| else | |
| regval32 = __raw_readw(clk->enable_reg); | |
| if ((regval32 & (1 << clk->enable_bit)) == 0) | |
| return; | |
| printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); | |
| clk->ops->disable(clk); | |
| printk(" done\n"); | |
| } | |
| #endif | |
| int clk_enable(struct clk *clk) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| if (IS_ERR_OR_NULL(clk)) | |
| return -EINVAL; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| ret = omap1_clk_enable(clk); | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(clk_enable); | |
| void clk_disable(struct clk *clk) | |
| { | |
| unsigned long flags; | |
| if (IS_ERR_OR_NULL(clk)) | |
| return; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| if (clk->usecount == 0) { | |
| pr_err("Trying disable clock %s with 0 usecount\n", | |
| clk->name); | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| omap1_clk_disable(clk); | |
| out: | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| } | |
| EXPORT_SYMBOL(clk_disable); | |
| unsigned long clk_get_rate(struct clk *clk) | |
| { | |
| unsigned long flags; | |
| unsigned long ret; | |
| if (IS_ERR_OR_NULL(clk)) | |
| return 0; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| ret = clk->rate; | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(clk_get_rate); | |
| /* | |
| * Optional clock functions defined in include/linux/clk.h | |
| */ | |
| long clk_round_rate(struct clk *clk, unsigned long rate) | |
| { | |
| unsigned long flags; | |
| long ret; | |
| if (IS_ERR_OR_NULL(clk)) | |
| return 0; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| ret = omap1_clk_round_rate(clk, rate); | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(clk_round_rate); | |
| int clk_set_rate(struct clk *clk, unsigned long rate) | |
| { | |
| unsigned long flags; | |
| int ret = -EINVAL; | |
| if (IS_ERR_OR_NULL(clk)) | |
| return ret; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| ret = omap1_clk_set_rate(clk, rate); | |
| if (ret == 0) | |
| propagate_rate(clk); | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(clk_set_rate); | |
| int clk_set_parent(struct clk *clk, struct clk *parent) | |
| { | |
| WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); | |
| return -EINVAL; | |
| } | |
| EXPORT_SYMBOL(clk_set_parent); | |
| struct clk *clk_get_parent(struct clk *clk) | |
| { | |
| return clk->parent; | |
| } | |
| EXPORT_SYMBOL(clk_get_parent); | |
| /* | |
| * OMAP specific clock functions shared between omap1 and omap2 | |
| */ | |
| /* Used for clocks that always have same value as the parent clock */ | |
| unsigned long followparent_recalc(struct clk *clk) | |
| { | |
| return clk->parent->rate; | |
| } | |
| /* | |
| * Used for clocks that have the same value as the parent clock, | |
| * divided by some factor | |
| */ | |
| unsigned long omap_fixed_divisor_recalc(struct clk *clk) | |
| { | |
| WARN_ON(!clk->fixed_div); | |
| return clk->parent->rate / clk->fixed_div; | |
| } | |
| void clk_reparent(struct clk *child, struct clk *parent) | |
| { | |
| list_del_init(&child->sibling); | |
| if (parent) | |
| list_add(&child->sibling, &parent->children); | |
| child->parent = parent; | |
| /* now do the debugfs renaming to reattach the child | |
| to the proper parent */ | |
| } | |
| /* Propagate rate to children */ | |
| void propagate_rate(struct clk *tclk) | |
| { | |
| struct clk *clkp; | |
| list_for_each_entry(clkp, &tclk->children, sibling) { | |
| if (clkp->recalc) | |
| clkp->rate = clkp->recalc(clkp); | |
| propagate_rate(clkp); | |
| } | |
| } | |
| static LIST_HEAD(root_clks); | |
| /** | |
| * recalculate_root_clocks - recalculate and propagate all root clocks | |
| * | |
| * Recalculates all root clocks (clocks with no parent), which if the | |
| * clock's .recalc is set correctly, should also propagate their rates. | |
| * Called at init. | |
| */ | |
| void recalculate_root_clocks(void) | |
| { | |
| struct clk *clkp; | |
| list_for_each_entry(clkp, &root_clks, sibling) { | |
| if (clkp->recalc) | |
| clkp->rate = clkp->recalc(clkp); | |
| propagate_rate(clkp); | |
| } | |
| } | |
| /** | |
| * clk_preinit - initialize any fields in the struct clk before clk init | |
| * @clk: struct clk * to initialize | |
| * | |
| * Initialize any struct clk fields needed before normal clk initialization | |
| * can run. No return value. | |
| */ | |
| void clk_preinit(struct clk *clk) | |
| { | |
| INIT_LIST_HEAD(&clk->children); | |
| } | |
| int clk_register(struct clk *clk) | |
| { | |
| if (IS_ERR_OR_NULL(clk)) | |
| return -EINVAL; | |
| /* | |
| * trap out already registered clocks | |
| */ | |
| if (clk->node.next || clk->node.prev) | |
| return 0; | |
| mutex_lock(&clocks_mutex); | |
| if (clk->parent) | |
| list_add(&clk->sibling, &clk->parent->children); | |
| else | |
| list_add(&clk->sibling, &root_clks); | |
| list_add(&clk->node, &clocks); | |
| if (clk->init) | |
| clk->init(clk); | |
| mutex_unlock(&clocks_mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(clk_register); | |
| void clk_unregister(struct clk *clk) | |
| { | |
| if (IS_ERR_OR_NULL(clk)) | |
| return; | |
| mutex_lock(&clocks_mutex); | |
| list_del(&clk->sibling); | |
| list_del(&clk->node); | |
| mutex_unlock(&clocks_mutex); | |
| } | |
| EXPORT_SYMBOL(clk_unregister); | |
| void clk_enable_init_clocks(void) | |
| { | |
| struct clk *clkp; | |
| list_for_each_entry(clkp, &clocks, node) | |
| if (clkp->flags & ENABLE_ON_INIT) | |
| clk_enable(clkp); | |
| } | |
| /** | |
| * omap_clk_get_by_name - locate OMAP struct clk by its name | |
| * @name: name of the struct clk to locate | |
| * | |
| * Locate an OMAP struct clk by its name. Assumes that struct clk | |
| * names are unique. Returns NULL if not found or a pointer to the | |
| * struct clk if found. | |
| */ | |
| struct clk *omap_clk_get_by_name(const char *name) | |
| { | |
| struct clk *c; | |
| struct clk *ret = NULL; | |
| mutex_lock(&clocks_mutex); | |
| list_for_each_entry(c, &clocks, node) { | |
| if (!strcmp(c->name, name)) { | |
| ret = c; | |
| break; | |
| } | |
| } | |
| mutex_unlock(&clocks_mutex); | |
| return ret; | |
| } | |
| int omap_clk_enable_autoidle_all(void) | |
| { | |
| struct clk *c; | |
| unsigned long flags; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| list_for_each_entry(c, &clocks, node) | |
| if (c->ops->allow_idle) | |
| c->ops->allow_idle(c); | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return 0; | |
| } | |
| int omap_clk_disable_autoidle_all(void) | |
| { | |
| struct clk *c; | |
| unsigned long flags; | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| list_for_each_entry(c, &clocks, node) | |
| if (c->ops->deny_idle) | |
| c->ops->deny_idle(c); | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return 0; | |
| } | |
| /* | |
| * Low level helpers | |
| */ | |
| static int clkll_enable_null(struct clk *clk) | |
| { | |
| return 0; | |
| } | |
| static void clkll_disable_null(struct clk *clk) | |
| { | |
| } | |
| const struct clkops clkops_null = { | |
| .enable = clkll_enable_null, | |
| .disable = clkll_disable_null, | |
| }; | |
| /* | |
| * Dummy clock | |
| * | |
| * Used for clock aliases that are needed on some OMAPs, but not others | |
| */ | |
| struct clk dummy_ck = { | |
| .name = "dummy", | |
| .ops = &clkops_null, | |
| }; | |
| /* | |
| * | |
| */ | |
| #ifdef CONFIG_OMAP_RESET_CLOCKS | |
| /* | |
| * Disable any unused clocks left on by the bootloader | |
| */ | |
| static int __init clk_disable_unused(void) | |
| { | |
| struct clk *ck; | |
| unsigned long flags; | |
| pr_info("clock: disabling unused clocks to save power\n"); | |
| spin_lock_irqsave(&clockfw_lock, flags); | |
| list_for_each_entry(ck, &clocks, node) { | |
| if (ck->ops == &clkops_null) | |
| continue; | |
| if (ck->usecount > 0 || !ck->enable_reg) | |
| continue; | |
| omap1_clk_disable_unused(ck); | |
| } | |
| spin_unlock_irqrestore(&clockfw_lock, flags); | |
| return 0; | |
| } | |
| late_initcall(clk_disable_unused); | |
| late_initcall(omap_clk_enable_autoidle_all); | |
| #endif | |
| #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) | |
| /* | |
| * debugfs support to trace clock tree hierarchy and attributes | |
| */ | |
| #include <linux/debugfs.h> | |
| #include <linux/seq_file.h> | |
| static struct dentry *clk_debugfs_root; | |
| static int debug_clock_show(struct seq_file *s, void *unused) | |
| { | |
| struct clk *c; | |
| struct clk *pa; | |
| mutex_lock(&clocks_mutex); | |
| seq_printf(s, "%-30s %-30s %-10s %s\n", | |
| "clock-name", "parent-name", "rate", "use-count"); | |
| list_for_each_entry(c, &clocks, node) { | |
| pa = c->parent; | |
| seq_printf(s, "%-30s %-30s %-10lu %d\n", | |
| c->name, pa ? pa->name : "none", c->rate, | |
| c->usecount); | |
| } | |
| mutex_unlock(&clocks_mutex); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(debug_clock); | |
| static void clk_debugfs_register_one(struct clk *c) | |
| { | |
| struct dentry *d; | |
| struct clk *pa = c->parent; | |
| d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); | |
| c->dent = d; | |
| debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount); | |
| debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate); | |
| debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags); | |
| } | |
| static void clk_debugfs_register(struct clk *c) | |
| { | |
| struct clk *pa = c->parent; | |
| if (pa && !pa->dent) | |
| clk_debugfs_register(pa); | |
| if (!c->dent) | |
| clk_debugfs_register_one(c); | |
| } | |
| static int __init clk_debugfs_init(void) | |
| { | |
| struct clk *c; | |
| struct dentry *d; | |
| d = debugfs_create_dir("clock", NULL); | |
| clk_debugfs_root = d; | |
| list_for_each_entry(c, &clocks, node) | |
| clk_debugfs_register(c); | |
| debugfs_create_file("summary", S_IRUGO, d, NULL, &debug_clock_fops); | |
| return 0; | |
| } | |
| late_initcall(clk_debugfs_init); | |
| #endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ |