| // SPDX-License-Identifier: GPL-2.0-only | |
| // | |
| // Copyright(c) 2020 Intel Corporation. All rights reserved. | |
| // | |
| // Author: Cezary Rojewski <cezary.rojewski@intel.com> | |
| // | |
| // Special thanks to: | |
| // Marcin Barlik <marcin.barlik@intel.com> | |
| // Piotr Papierkowski <piotr.papierkowski@intel.com> | |
| // | |
| // for sharing LPT-LP and WTP-LP AudioDSP architecture expertise and | |
| // helping backtrack its historical background | |
| // | |
| #include <linux/acpi.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <sound/intel-dsp-config.h> | |
| #include <sound/soc.h> | |
| #include <sound/soc-acpi.h> | |
| #include <sound/soc-acpi-intel-match.h> | |
| #include "core.h" | |
| #include "registers.h" | |
| #define CREATE_TRACE_POINTS | |
| #include "trace.h" | |
| static int __maybe_unused catpt_suspend(struct device *dev) | |
| { | |
| struct catpt_dev *cdev = dev_get_drvdata(dev); | |
| struct dma_chan *chan; | |
| int ret; | |
| chan = catpt_dma_request_config_chan(cdev); | |
| if (IS_ERR(chan)) | |
| return PTR_ERR(chan); | |
| memset(&cdev->dx_ctx, 0, sizeof(cdev->dx_ctx)); | |
| ret = catpt_ipc_enter_dxstate(cdev, CATPT_DX_STATE_D3, &cdev->dx_ctx); | |
| if (ret) { | |
| ret = CATPT_IPC_ERROR(ret); | |
| goto release_dma_chan; | |
| } | |
| ret = catpt_dsp_stall(cdev, true); | |
| if (ret) | |
| goto release_dma_chan; | |
| ret = catpt_store_memdumps(cdev, chan); | |
| if (ret) { | |
| dev_err(cdev->dev, "store memdumps failed: %d\n", ret); | |
| goto release_dma_chan; | |
| } | |
| ret = catpt_store_module_states(cdev, chan); | |
| if (ret) { | |
| dev_err(cdev->dev, "store module states failed: %d\n", ret); | |
| goto release_dma_chan; | |
| } | |
| ret = catpt_store_streams_context(cdev, chan); | |
| if (ret) | |
| dev_err(cdev->dev, "store streams ctx failed: %d\n", ret); | |
| release_dma_chan: | |
| dma_release_channel(chan); | |
| if (ret) | |
| return ret; | |
| return catpt_dsp_power_down(cdev); | |
| } | |
| static int __maybe_unused catpt_resume(struct device *dev) | |
| { | |
| struct catpt_dev *cdev = dev_get_drvdata(dev); | |
| int ret, i; | |
| ret = catpt_dsp_power_up(cdev); | |
| if (ret) | |
| return ret; | |
| if (!try_module_get(dev->driver->owner)) { | |
| dev_info(dev, "module unloading, skipping fw boot\n"); | |
| return 0; | |
| } | |
| module_put(dev->driver->owner); | |
| ret = catpt_boot_firmware(cdev, true); | |
| if (ret) { | |
| dev_err(cdev->dev, "boot firmware failed: %d\n", ret); | |
| return ret; | |
| } | |
| /* reconfigure SSP devices after Dx transition */ | |
| for (i = 0; i < CATPT_SSP_COUNT; i++) { | |
| if (cdev->devfmt[i].iface == UINT_MAX) | |
| continue; | |
| ret = catpt_ipc_set_device_format(cdev, &cdev->devfmt[i]); | |
| if (ret) | |
| return CATPT_IPC_ERROR(ret); | |
| } | |
| return 0; | |
| } | |
| static int __maybe_unused catpt_runtime_suspend(struct device *dev) | |
| { | |
| if (!try_module_get(dev->driver->owner)) { | |
| dev_info(dev, "module unloading, skipping suspend\n"); | |
| return 0; | |
| } | |
| module_put(dev->driver->owner); | |
| return catpt_suspend(dev); | |
| } | |
| static int __maybe_unused catpt_runtime_resume(struct device *dev) | |
| { | |
| return catpt_resume(dev); | |
| } | |
| static const struct dev_pm_ops catpt_dev_pm = { | |
| SET_SYSTEM_SLEEP_PM_OPS(catpt_suspend, catpt_resume) | |
| SET_RUNTIME_PM_OPS(catpt_runtime_suspend, catpt_runtime_resume, NULL) | |
| }; | |
| /* machine board owned by CATPT is removed with this hook */ | |
| static void board_pdev_unregister(void *data) | |
| { | |
| platform_device_unregister(data); | |
| } | |
| static int catpt_register_board(struct catpt_dev *cdev) | |
| { | |
| const struct catpt_spec *spec = cdev->spec; | |
| struct snd_soc_acpi_mach *mach; | |
| struct platform_device *board; | |
| mach = snd_soc_acpi_find_machine(spec->machines); | |
| if (!mach) { | |
| dev_info(cdev->dev, "no machines present\n"); | |
| return 0; | |
| } | |
| mach->mach_params.platform = "catpt-platform"; | |
| board = platform_device_register_data(NULL, mach->drv_name, | |
| PLATFORM_DEVID_NONE, | |
| (const void *)mach, sizeof(*mach)); | |
| if (IS_ERR(board)) { | |
| dev_err(cdev->dev, "board register failed\n"); | |
| return PTR_ERR(board); | |
| } | |
| return devm_add_action_or_reset(cdev->dev, board_pdev_unregister, | |
| board); | |
| } | |
| static int catpt_probe_components(struct catpt_dev *cdev) | |
| { | |
| int ret; | |
| ret = catpt_dsp_power_up(cdev); | |
| if (ret) | |
| return ret; | |
| ret = catpt_dmac_probe(cdev); | |
| if (ret) { | |
| dev_err(cdev->dev, "DMAC probe failed: %d\n", ret); | |
| goto err_dmac_probe; | |
| } | |
| ret = catpt_first_boot_firmware(cdev); | |
| if (ret) { | |
| dev_err(cdev->dev, "first fw boot failed: %d\n", ret); | |
| goto err_boot_fw; | |
| } | |
| ret = catpt_register_plat_component(cdev); | |
| if (ret) { | |
| dev_err(cdev->dev, "register plat comp failed: %d\n", ret); | |
| goto err_boot_fw; | |
| } | |
| ret = catpt_register_board(cdev); | |
| if (ret) { | |
| dev_err(cdev->dev, "register board failed: %d\n", ret); | |
| goto err_reg_board; | |
| } | |
| /* reflect actual ADSP state in pm_runtime */ | |
| pm_runtime_set_active(cdev->dev); | |
| pm_runtime_set_autosuspend_delay(cdev->dev, 2000); | |
| pm_runtime_use_autosuspend(cdev->dev); | |
| pm_runtime_mark_last_busy(cdev->dev); | |
| pm_runtime_enable(cdev->dev); | |
| return 0; | |
| err_reg_board: | |
| snd_soc_unregister_component(cdev->dev); | |
| err_boot_fw: | |
| catpt_dmac_remove(cdev); | |
| err_dmac_probe: | |
| catpt_dsp_power_down(cdev); | |
| return ret; | |
| } | |
| static void catpt_dev_init(struct catpt_dev *cdev, struct device *dev, | |
| const struct catpt_spec *spec) | |
| { | |
| cdev->dev = dev; | |
| cdev->spec = spec; | |
| init_completion(&cdev->fw_ready); | |
| INIT_LIST_HEAD(&cdev->stream_list); | |
| spin_lock_init(&cdev->list_lock); | |
| mutex_init(&cdev->clk_mutex); | |
| /* | |
| * Mark both device formats as uninitialized. Once corresponding | |
| * cpu_dai's pcm is created, proper values are assigned. | |
| */ | |
| cdev->devfmt[CATPT_SSP_IFACE_0].iface = UINT_MAX; | |
| cdev->devfmt[CATPT_SSP_IFACE_1].iface = UINT_MAX; | |
| catpt_ipc_init(&cdev->ipc, dev); | |
| catpt_sram_init(&cdev->dram, spec->host_dram_offset, | |
| catpt_dram_size(cdev)); | |
| catpt_sram_init(&cdev->iram, spec->host_iram_offset, | |
| catpt_iram_size(cdev)); | |
| } | |
| static int catpt_acpi_probe(struct platform_device *pdev) | |
| { | |
| const struct catpt_spec *spec; | |
| struct catpt_dev *cdev; | |
| struct device *dev = &pdev->dev; | |
| const struct acpi_device_id *id; | |
| struct resource *res; | |
| int ret; | |
| id = acpi_match_device(dev->driver->acpi_match_table, dev); | |
| if (!id) | |
| return -ENODEV; | |
| ret = snd_intel_acpi_dsp_driver_probe(dev, id->id); | |
| if (ret != SND_INTEL_DSP_DRIVER_ANY && ret != SND_INTEL_DSP_DRIVER_SST) { | |
| dev_dbg(dev, "CATPT ACPI driver not selected, aborting probe\n"); | |
| return -ENODEV; | |
| } | |
| spec = device_get_match_data(dev); | |
| if (!spec) | |
| return -ENODEV; | |
| cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); | |
| if (!cdev) | |
| return -ENOMEM; | |
| catpt_dev_init(cdev, dev, spec); | |
| /* map DSP bar address */ | |
| cdev->lpe_ba = devm_platform_get_and_ioremap_resource(pdev, 0, &res); | |
| if (IS_ERR(cdev->lpe_ba)) | |
| return PTR_ERR(cdev->lpe_ba); | |
| cdev->lpe_base = res->start; | |
| /* map PCI bar address */ | |
| cdev->pci_ba = devm_platform_ioremap_resource(pdev, 1); | |
| if (IS_ERR(cdev->pci_ba)) | |
| return PTR_ERR(cdev->pci_ba); | |
| /* alloc buffer for storing DRAM context during dx transitions */ | |
| cdev->dxbuf_vaddr = dmam_alloc_coherent(dev, catpt_dram_size(cdev), | |
| &cdev->dxbuf_paddr, GFP_KERNEL); | |
| if (!cdev->dxbuf_vaddr) | |
| return -ENOMEM; | |
| ret = platform_get_irq(pdev, 0); | |
| if (ret < 0) | |
| return ret; | |
| cdev->irq = ret; | |
| platform_set_drvdata(pdev, cdev); | |
| ret = devm_request_threaded_irq(dev, cdev->irq, catpt_dsp_irq_handler, | |
| catpt_dsp_irq_thread, | |
| IRQF_SHARED, "AudioDSP", cdev); | |
| if (ret) | |
| return ret; | |
| return catpt_probe_components(cdev); | |
| } | |
| static int catpt_acpi_remove(struct platform_device *pdev) | |
| { | |
| struct catpt_dev *cdev = platform_get_drvdata(pdev); | |
| pm_runtime_disable(cdev->dev); | |
| snd_soc_unregister_component(cdev->dev); | |
| catpt_dmac_remove(cdev); | |
| catpt_dsp_power_down(cdev); | |
| catpt_sram_free(&cdev->iram); | |
| catpt_sram_free(&cdev->dram); | |
| return 0; | |
| } | |
| static struct catpt_spec lpt_desc = { | |
| .machines = snd_soc_acpi_intel_haswell_machines, | |
| .core_id = 0x01, | |
| .host_dram_offset = 0x000000, | |
| .host_iram_offset = 0x080000, | |
| .host_shim_offset = 0x0E7000, | |
| .host_dma_offset = { 0x0F0000, 0x0F8000 }, | |
| .host_ssp_offset = { 0x0E8000, 0x0E9000 }, | |
| .dram_mask = LPT_VDRTCTL0_DSRAMPGE_MASK, | |
| .iram_mask = LPT_VDRTCTL0_ISRAMPGE_MASK, | |
| .d3srampgd_bit = LPT_VDRTCTL0_D3SRAMPGD, | |
| .d3pgd_bit = LPT_VDRTCTL0_D3PGD, | |
| .pll_shutdown = lpt_dsp_pll_shutdown, | |
| }; | |
| static struct catpt_spec wpt_desc = { | |
| .machines = snd_soc_acpi_intel_broadwell_machines, | |
| .core_id = 0x02, | |
| .host_dram_offset = 0x000000, | |
| .host_iram_offset = 0x0A0000, | |
| .host_shim_offset = 0x0FB000, | |
| .host_dma_offset = { 0x0FE000, 0x0FF000 }, | |
| .host_ssp_offset = { 0x0FC000, 0x0FD000 }, | |
| .dram_mask = WPT_VDRTCTL0_DSRAMPGE_MASK, | |
| .iram_mask = WPT_VDRTCTL0_ISRAMPGE_MASK, | |
| .d3srampgd_bit = WPT_VDRTCTL0_D3SRAMPGD, | |
| .d3pgd_bit = WPT_VDRTCTL0_D3PGD, | |
| .pll_shutdown = wpt_dsp_pll_shutdown, | |
| }; | |
| static const struct acpi_device_id catpt_ids[] = { | |
| { "INT33C8", (unsigned long)&lpt_desc }, | |
| { "INT3438", (unsigned long)&wpt_desc }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, catpt_ids); | |
| static struct platform_driver catpt_acpi_driver = { | |
| .probe = catpt_acpi_probe, | |
| .remove = catpt_acpi_remove, | |
| .driver = { | |
| .name = "intel_catpt", | |
| .acpi_match_table = catpt_ids, | |
| .pm = &catpt_dev_pm, | |
| .dev_groups = catpt_attr_groups, | |
| }, | |
| }; | |
| module_platform_driver(catpt_acpi_driver); | |
| MODULE_AUTHOR("Cezary Rojewski <cezary.rojewski@intel.com>"); | |
| MODULE_DESCRIPTION("Intel LPT/WPT AudioDSP driver"); | |
| MODULE_LICENSE("GPL v2"); |