| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de> | |
| */ | |
| /dts-v1/; | |
| #include "dm3725.dtsi" | |
| #include <dt-bindings/input/input.h> | |
| #include <dt-bindings/leds/common.h> | |
| / { | |
| model = "Amazon Echo (first generation)"; | |
| compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3"; | |
| cpus { | |
| cpu@0 { | |
| cpu0-supply = <&vdd1_reg>; | |
| }; | |
| }; | |
| memory@80000000 { | |
| device_type = "memory"; | |
| reg = <0x80000000 0xc600000>; /* 198 MB */ | |
| }; | |
| vcc5v: fixedregulator0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc5v"; | |
| regulator-min-microvolt = <5000000>; | |
| regulator-max-microvolt = <5000000>; | |
| regulator-boot-on; | |
| regulator-always-on; | |
| }; | |
| vcc3v3: fixedregulator1 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc3v3"; | |
| regulator-min-microvolt = <3300000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-boot-on; | |
| regulator-always-on; | |
| }; | |
| vcc1v8: fixedregulator2 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc1v8"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-boot-on; | |
| regulator-always-on; | |
| }; | |
| sdio_pwrseq: sdio-pwrseq { | |
| compatible = "mmc-pwrseq-simple"; | |
| reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; | |
| post-power-on-delay-ms = <40>; | |
| }; | |
| gpio-keys { | |
| compatible = "gpio-keys"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&button_pins>; | |
| mute-button { | |
| label = "mute"; | |
| linux,code = <KEY_MUTE>; | |
| gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */ | |
| wakeup-source; | |
| }; | |
| help-button { | |
| label = "help"; | |
| linux,code = <KEY_HELP>; | |
| gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */ | |
| wakeup-source; | |
| }; | |
| }; | |
| rotary: rotary-encoder { | |
| compatible = "rotary-encoder"; | |
| gpios = < | |
| &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */ | |
| &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */ | |
| >; | |
| linux,axis = <REL_X>; | |
| rotary-encoder,relative-axis; | |
| }; | |
| speaker_amp: speaker-amplifier { | |
| compatible = "simple-audio-amplifier"; | |
| enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* gpio_129 */ | |
| sound-name-prefix = "Speaker Amp"; | |
| VCC-supply = <&vcc1v8>; | |
| }; | |
| sound { | |
| compatible = "simple-audio-card"; | |
| simple-audio-card,name = "Misto Speaker"; | |
| simple-audio-card,widgets = | |
| "Speaker", "Speaker"; | |
| simple-audio-card,routing = | |
| "Speaker Amp INL", "HPL", | |
| "Speaker Amp INR", "HPR", | |
| "Speaker", "Speaker Amp OUTL", | |
| "Speaker", "Speaker Amp OUTR"; | |
| simple-audio-card,format = "i2s"; | |
| simple-audio-card,bitclock-master = <&sound_master>; | |
| simple-audio-card,frame-master = <&sound_master>; | |
| simple-audio-card,aux-devs = <&speaker_amp>; | |
| simple-audio-card,cpu { | |
| sound-dai = <&mcbsp2>; | |
| }; | |
| sound_master: simple-audio-card,codec { | |
| sound-dai = <&codec0>; | |
| system-clock-frequency = <19200000>; | |
| }; | |
| }; | |
| }; | |
| &i2c1 { | |
| clock-frequency = <400000>; | |
| tps: tps@2d { | |
| reg = <0x2d>; | |
| }; | |
| }; | |
| &mcbsp2 { | |
| status = "okay"; | |
| #sound-dai-cells = <0>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&mcbsp2_pins>; | |
| }; | |
| &i2c2 { | |
| clock-frequency = <400000>; | |
| lp5523A: lp5523A@32 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "national,lp5523"; | |
| label = "q1"; | |
| reg = <0x32>; | |
| clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
| enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ | |
| multi-led@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@0 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@1 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@6 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x6>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@2 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@3 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x3>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@7 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x7>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@2 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@4 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x4>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@5 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x5>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@8 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x8>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| }; | |
| lp5523B: lp5523B@33 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "national,lp5523"; | |
| label = "q3"; | |
| reg = <0x33>; | |
| clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
| multi-led@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@0 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@1 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@6 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x6>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@2 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@3 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x3>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@7 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x7>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@2 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@4 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x4>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@5 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x5>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@8 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x8>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| }; | |
| lp5523C: lp5523C@34 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "national,lp5523"; | |
| label = "q4"; | |
| reg = <0x34>; | |
| clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
| multi-led@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@0 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@1 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@6 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x6>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@2 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@3 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x3>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@7 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x7>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@2 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@4 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x4>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@5 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x5>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@8 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x8>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| }; | |
| lp5523D: lp552D@35 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "national,lp5523"; | |
| label = "q2"; | |
| reg = <0x35>; | |
| clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ | |
| multi-led@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@0 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x0>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@1 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@6 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x6>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@1 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@2 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@3 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x3>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@7 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x7>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| multi-led@2 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x2>; | |
| color = <LED_COLOR_ID_RGB>; | |
| led@4 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x4>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| }; | |
| led@5 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x5>; | |
| color = <LED_COLOR_ID_BLUE>; | |
| }; | |
| led@8 { | |
| led-cur = /bits/ 8 <12>; | |
| max-cur = /bits/ 8 <15>; | |
| reg = <0x8>; | |
| color = <LED_COLOR_ID_RED>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| &i2c3 { | |
| clock-frequency = <400000>; | |
| codec0: codec@18 { | |
| #sound-dai-cells = <0>; | |
| compatible = "ti,tlv320aic32x4"; | |
| reg = <0x18>; | |
| clocks = <&sys_clkout1>; | |
| clock-names = "mclk"; | |
| ldoin-supply = <&vcc1v8>; | |
| iov-supply = <&vcc1v8>; | |
| reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; /* gpio_74 */ | |
| }; | |
| }; | |
| #include "tps65910.dtsi" | |
| &omap3_pmx_core { | |
| tps_pins: pinmux_tps_pins { | |
| pinctrl-single,pins = < | |
| OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ | |
| >; | |
| }; | |
| button_pins: pinmux_button_pins { | |
| pinctrl-single,pins = < | |
| OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ | |
| OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ | |
| OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* dss_data4.gpio_74 */ | |
| OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* dss_data15.gpio_85 */ | |
| OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0) /* sys_clkout1.sys_clkout1 */ | |
| >; | |
| }; | |
| mmc1_pins: pinmux_mmc1_pins { | |
| pinctrl-single,pins = < | |
| OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ | |
| OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ | |
| OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ | |
| OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ | |
| OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ | |
| OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ | |
| >; | |
| }; | |
| mmc2_pins: pinmux_mmc2_pins { | |
| pinctrl-single,pins = < | |
| OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ | |
| OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ | |
| OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ | |
| OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ | |
| OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ | |
| OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ | |
| OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ | |
| OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ | |
| OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ | |
| OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ | |
| >; | |
| }; | |
| mcbsp2_pins: pinmux_mcbsp2_pins { | |
| pinctrl-single,pins = < | |
| OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ | |
| OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ | |
| OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ | |
| OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ | |
| >; | |
| }; | |
| }; | |
| &omap3_pmx_core2 { | |
| mmc3_pins: pinmux_mmc3_pins { | |
| pinctrl-single,pins = < | |
| OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ | |
| OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ | |
| OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ | |
| OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ | |
| OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ | |
| OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ | |
| >; | |
| }; | |
| }; | |
| &mmc1 { | |
| status = "okay"; | |
| bus-width = <4>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&mmc1_pins>; | |
| vmmc-supply = <&vmmc_reg>; | |
| }; | |
| &mmc2 { | |
| status = "okay"; | |
| bus-width = <8>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&mmc2_pins>; | |
| vmmc-supply = <&vmmc_reg>; | |
| }; | |
| &mmc3 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "okay"; | |
| bus-width = <4>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&mmc3_pins>; | |
| non-removable; | |
| disable-wp; | |
| mmc-pwrseq = <&sdio_pwrseq>; | |
| vmmc-supply = <&vcc3v3>; | |
| vqmmc-supply = <&vcc1v8>; | |
| atheros@0 { | |
| compatible = "atheros,ath6kl"; | |
| reg = <0>; | |
| bus-width = <4>; | |
| }; | |
| }; | |
| &tps { | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&tps_pins>; | |
| interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
| interrupt-parent = <&intc>; | |
| ti,en-ck32k-xtal; | |
| ti,system-power-controller; | |
| vcc1-supply = <&vcc5v>; | |
| vcc2-supply = <&vcc5v>; | |
| vcc3-supply = <&vcc5v>; | |
| vcc4-supply = <&vcc5v>; | |
| vcc5-supply = <&vcc5v>; | |
| vcc6-supply = <&vcc5v>; | |
| vcc7-supply = <&vcc5v>; | |
| vccio-supply = <&vcc5v>; | |
| regulators { | |
| vio_reg: regulator@1 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-always-on; | |
| }; | |
| vdd1_reg: regulator@2 { | |
| regulator-name = "vdd_mpu"; | |
| regulator-min-microvolt = <600000>; | |
| regulator-max-microvolt = <1500000>; | |
| regulator-boot-on; | |
| regulator-always-on; | |
| }; | |
| vdd2_reg: regulator@3 { | |
| regulator-name = "vdd_dsp"; | |
| regulator-min-microvolt = <600000>; | |
| regulator-max-microvolt = <1500000>; | |
| regulator-always-on; | |
| }; | |
| vdd3_reg: regulator@4 { | |
| regulator-name = "vdd_core"; | |
| regulator-min-microvolt = <5000000>; | |
| regulator-max-microvolt = <5000000>; | |
| regulator-always-on; | |
| }; | |
| vdig1_reg: regulator@5 { | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <2700000>; | |
| regulator-always-on; | |
| }; | |
| vdig2_reg: regulator@6 { | |
| regulator-min-microvolt = <1000000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-always-on; | |
| }; | |
| vpll_reg: regulator@7 { | |
| regulator-min-microvolt = <1000000>; | |
| regulator-max-microvolt = <2500000>; | |
| regulator-always-on; | |
| }; | |
| vdac_reg: regulator@8 { | |
| regulator-min-microvolt = <1100000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-always-on; | |
| }; | |
| vaux1_reg: regulator@9 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <2850000>; | |
| regulator-always-on; | |
| }; | |
| vaux2_reg: regulator@10 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-always-on; | |
| }; | |
| vaux33_reg: regulator@11 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-always-on; | |
| }; | |
| vmmc_reg: regulator@12 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3000000>; | |
| regulator-always-on; | |
| }; | |
| }; | |
| }; |