| // SPDX-License-Identifier: GPL-2.0-only | |
| #include <linux/aer.h> | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_ids.h> | |
| #include "nitrox_dev.h" | |
| #include "nitrox_common.h" | |
| #include "nitrox_csr.h" | |
| #include "nitrox_hal.h" | |
| #include "nitrox_isr.h" | |
| #include "nitrox_debugfs.h" | |
| #define CNN55XX_DEV_ID 0x12 | |
| #define UCODE_HLEN 48 | |
| #define DEFAULT_SE_GROUP 0 | |
| #define DEFAULT_AE_GROUP 0 | |
| #define DRIVER_VERSION "1.2" | |
| #define CNN55XX_UCD_BLOCK_SIZE 32768 | |
| #define CNN55XX_MAX_UCODE_SIZE (CNN55XX_UCD_BLOCK_SIZE * 2) | |
| #define FW_DIR "cavium/" | |
| /* SE microcode */ | |
| #define SE_FW FW_DIR "cnn55xx_se.fw" | |
| /* AE microcode */ | |
| #define AE_FW FW_DIR "cnn55xx_ae.fw" | |
| static const char nitrox_driver_name[] = "CNN55XX"; | |
| static LIST_HEAD(ndevlist); | |
| static DEFINE_MUTEX(devlist_lock); | |
| static unsigned int num_devices; | |
| /* | |
| * nitrox_pci_tbl - PCI Device ID Table | |
| */ | |
| static const struct pci_device_id nitrox_pci_tbl[] = { | |
| {PCI_VDEVICE(CAVIUM, CNN55XX_DEV_ID), 0}, | |
| /* required last entry */ | |
| {0, } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, nitrox_pci_tbl); | |
| static unsigned int qlen = DEFAULT_CMD_QLEN; | |
| module_param(qlen, uint, 0644); | |
| MODULE_PARM_DESC(qlen, "Command queue length - default 2048"); | |
| /** | |
| * struct ucode - Firmware Header | |
| * @id: microcode ID | |
| * @version: firmware version | |
| * @code_size: code section size | |
| * @raz: alignment | |
| * @code: code section | |
| */ | |
| struct ucode { | |
| u8 id; | |
| char version[VERSION_LEN - 1]; | |
| __be32 code_size; | |
| u8 raz[12]; | |
| u64 code[]; | |
| }; | |
| /* | |
| * write_to_ucd_unit - Write Firmware to NITROX UCD unit | |
| */ | |
| static void write_to_ucd_unit(struct nitrox_device *ndev, u32 ucode_size, | |
| u64 *ucode_data, int block_num) | |
| { | |
| u32 code_size; | |
| u64 offset, data; | |
| int i = 0; | |
| /* | |
| * UCD structure | |
| * | |
| * ------------- | |
| * | BLK 7 | | |
| * ------------- | |
| * | BLK 6 | | |
| * ------------- | |
| * | ... | | |
| * ------------- | |
| * | BLK 0 | | |
| * ------------- | |
| * Total of 8 blocks, each size 32KB | |
| */ | |
| /* set the block number */ | |
| offset = UCD_UCODE_LOAD_BLOCK_NUM; | |
| nitrox_write_csr(ndev, offset, block_num); | |
| code_size = roundup(ucode_size, 16); | |
| while (code_size) { | |
| data = ucode_data[i]; | |
| /* write 8 bytes at a time */ | |
| offset = UCD_UCODE_LOAD_IDX_DATAX(i); | |
| nitrox_write_csr(ndev, offset, data); | |
| code_size -= 8; | |
| i++; | |
| } | |
| usleep_range(300, 400); | |
| } | |
| static int nitrox_load_fw(struct nitrox_device *ndev) | |
| { | |
| const struct firmware *fw; | |
| const char *fw_name; | |
| struct ucode *ucode; | |
| u64 *ucode_data; | |
| u64 offset; | |
| union ucd_core_eid_ucode_block_num core_2_eid_val; | |
| union aqm_grp_execmsk_lo aqm_grp_execmask_lo; | |
| union aqm_grp_execmsk_hi aqm_grp_execmask_hi; | |
| u32 ucode_size; | |
| int ret, i = 0; | |
| fw_name = SE_FW; | |
| dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); | |
| ret = request_firmware(&fw, fw_name, DEV(ndev)); | |
| if (ret < 0) { | |
| dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); | |
| return ret; | |
| } | |
| ucode = (struct ucode *)fw->data; | |
| ucode_size = be32_to_cpu(ucode->code_size) * 2; | |
| if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { | |
| dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", | |
| ucode_size, fw_name); | |
| release_firmware(fw); | |
| return -EINVAL; | |
| } | |
| ucode_data = ucode->code; | |
| /* copy the firmware version */ | |
| memcpy(&ndev->hw.fw_name[0][0], ucode->version, (VERSION_LEN - 2)); | |
| ndev->hw.fw_name[0][VERSION_LEN - 1] = '\0'; | |
| /* Load SE Firmware on UCD Block 0 */ | |
| write_to_ucd_unit(ndev, ucode_size, ucode_data, 0); | |
| release_firmware(fw); | |
| /* put all SE cores in DEFAULT_SE_GROUP */ | |
| offset = POM_GRP_EXECMASKX(DEFAULT_SE_GROUP); | |
| nitrox_write_csr(ndev, offset, (~0ULL)); | |
| /* write block number and firmware length | |
| * bit:<2:0> block number | |
| * bit:3 is set SE uses 32KB microcode | |
| * bit:3 is clear SE uses 64KB microcode | |
| */ | |
| core_2_eid_val.value = 0ULL; | |
| core_2_eid_val.ucode_blk = 0; | |
| if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) | |
| core_2_eid_val.ucode_len = 1; | |
| else | |
| core_2_eid_val.ucode_len = 0; | |
| for (i = 0; i < ndev->hw.se_cores; i++) { | |
| offset = UCD_SE_EID_UCODE_BLOCK_NUMX(i); | |
| nitrox_write_csr(ndev, offset, core_2_eid_val.value); | |
| } | |
| fw_name = AE_FW; | |
| dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); | |
| ret = request_firmware(&fw, fw_name, DEV(ndev)); | |
| if (ret < 0) { | |
| dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); | |
| return ret; | |
| } | |
| ucode = (struct ucode *)fw->data; | |
| ucode_size = be32_to_cpu(ucode->code_size) * 2; | |
| if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { | |
| dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", | |
| ucode_size, fw_name); | |
| release_firmware(fw); | |
| return -EINVAL; | |
| } | |
| ucode_data = ucode->code; | |
| /* copy the firmware version */ | |
| memcpy(&ndev->hw.fw_name[1][0], ucode->version, (VERSION_LEN - 2)); | |
| ndev->hw.fw_name[1][VERSION_LEN - 1] = '\0'; | |
| /* Load AE Firmware on UCD Block 2 */ | |
| write_to_ucd_unit(ndev, ucode_size, ucode_data, 2); | |
| release_firmware(fw); | |
| /* put all AE cores in DEFAULT_AE_GROUP */ | |
| offset = AQM_GRP_EXECMSK_LOX(DEFAULT_AE_GROUP); | |
| aqm_grp_execmask_lo.exec_0_to_39 = 0xFFFFFFFFFFULL; | |
| nitrox_write_csr(ndev, offset, aqm_grp_execmask_lo.value); | |
| offset = AQM_GRP_EXECMSK_HIX(DEFAULT_AE_GROUP); | |
| aqm_grp_execmask_hi.exec_40_to_79 = 0xFFFFFFFFFFULL; | |
| nitrox_write_csr(ndev, offset, aqm_grp_execmask_hi.value); | |
| /* write block number and firmware length | |
| * bit:<2:0> block number | |
| * bit:3 is set AE uses 32KB microcode | |
| * bit:3 is clear AE uses 64KB microcode | |
| */ | |
| core_2_eid_val.value = 0ULL; | |
| core_2_eid_val.ucode_blk = 2; | |
| if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) | |
| core_2_eid_val.ucode_len = 1; | |
| else | |
| core_2_eid_val.ucode_len = 0; | |
| for (i = 0; i < ndev->hw.ae_cores; i++) { | |
| offset = UCD_AE_EID_UCODE_BLOCK_NUMX(i); | |
| nitrox_write_csr(ndev, offset, core_2_eid_val.value); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * nitrox_add_to_devlist - add NITROX device to global device list | |
| * @ndev: NITROX device | |
| */ | |
| static int nitrox_add_to_devlist(struct nitrox_device *ndev) | |
| { | |
| struct nitrox_device *dev; | |
| int ret = 0; | |
| INIT_LIST_HEAD(&ndev->list); | |
| refcount_set(&ndev->refcnt, 1); | |
| mutex_lock(&devlist_lock); | |
| list_for_each_entry(dev, &ndevlist, list) { | |
| if (dev == ndev) { | |
| ret = -EEXIST; | |
| goto unlock; | |
| } | |
| } | |
| ndev->idx = num_devices++; | |
| list_add_tail(&ndev->list, &ndevlist); | |
| unlock: | |
| mutex_unlock(&devlist_lock); | |
| return ret; | |
| } | |
| /** | |
| * nitrox_remove_from_devlist - remove NITROX device from | |
| * global device list | |
| * @ndev: NITROX device | |
| */ | |
| static void nitrox_remove_from_devlist(struct nitrox_device *ndev) | |
| { | |
| mutex_lock(&devlist_lock); | |
| list_del(&ndev->list); | |
| num_devices--; | |
| mutex_unlock(&devlist_lock); | |
| } | |
| struct nitrox_device *nitrox_get_first_device(void) | |
| { | |
| struct nitrox_device *ndev; | |
| mutex_lock(&devlist_lock); | |
| list_for_each_entry(ndev, &ndevlist, list) { | |
| if (nitrox_ready(ndev)) | |
| break; | |
| } | |
| mutex_unlock(&devlist_lock); | |
| if (&ndev->list == &ndevlist) | |
| return NULL; | |
| refcount_inc(&ndev->refcnt); | |
| /* barrier to sync with other cpus */ | |
| smp_mb__after_atomic(); | |
| return ndev; | |
| } | |
| void nitrox_put_device(struct nitrox_device *ndev) | |
| { | |
| if (!ndev) | |
| return; | |
| refcount_dec(&ndev->refcnt); | |
| /* barrier to sync with other cpus */ | |
| smp_mb__after_atomic(); | |
| } | |
| static int nitrox_device_flr(struct pci_dev *pdev) | |
| { | |
| int pos = 0; | |
| pos = pci_save_state(pdev); | |
| if (pos) { | |
| dev_err(&pdev->dev, "Failed to save pci state\n"); | |
| return -ENOMEM; | |
| } | |
| pcie_reset_flr(pdev, PCI_RESET_DO_RESET); | |
| pci_restore_state(pdev); | |
| return 0; | |
| } | |
| static int nitrox_pf_sw_init(struct nitrox_device *ndev) | |
| { | |
| int err; | |
| err = nitrox_common_sw_init(ndev); | |
| if (err) | |
| return err; | |
| err = nitrox_register_interrupts(ndev); | |
| if (err) | |
| nitrox_common_sw_cleanup(ndev); | |
| return err; | |
| } | |
| static void nitrox_pf_sw_cleanup(struct nitrox_device *ndev) | |
| { | |
| nitrox_unregister_interrupts(ndev); | |
| nitrox_common_sw_cleanup(ndev); | |
| } | |
| /** | |
| * nitrox_bist_check - Check NITROX BIST registers status | |
| * @ndev: NITROX device | |
| */ | |
| static int nitrox_bist_check(struct nitrox_device *ndev) | |
| { | |
| u64 value = 0; | |
| int i; | |
| for (i = 0; i < NR_CLUSTERS; i++) { | |
| value += nitrox_read_csr(ndev, EMU_BIST_STATUSX(i)); | |
| value += nitrox_read_csr(ndev, EFL_CORE_BIST_REGX(i)); | |
| } | |
| value += nitrox_read_csr(ndev, UCD_BIST_STATUS); | |
| value += nitrox_read_csr(ndev, NPS_CORE_BIST_REG); | |
| value += nitrox_read_csr(ndev, NPS_CORE_NPC_BIST_REG); | |
| value += nitrox_read_csr(ndev, NPS_PKT_SLC_BIST_REG); | |
| value += nitrox_read_csr(ndev, NPS_PKT_IN_BIST_REG); | |
| value += nitrox_read_csr(ndev, POM_BIST_REG); | |
| value += nitrox_read_csr(ndev, BMI_BIST_REG); | |
| value += nitrox_read_csr(ndev, EFL_TOP_BIST_STAT); | |
| value += nitrox_read_csr(ndev, BMO_BIST_REG); | |
| value += nitrox_read_csr(ndev, LBC_BIST_STATUS); | |
| value += nitrox_read_csr(ndev, PEM_BIST_STATUSX(0)); | |
| if (value) | |
| return -EIO; | |
| return 0; | |
| } | |
| static int nitrox_pf_hw_init(struct nitrox_device *ndev) | |
| { | |
| int err; | |
| err = nitrox_bist_check(ndev); | |
| if (err) { | |
| dev_err(&ndev->pdev->dev, "BIST check failed\n"); | |
| return err; | |
| } | |
| /* get cores information */ | |
| nitrox_get_hwinfo(ndev); | |
| nitrox_config_nps_core_unit(ndev); | |
| nitrox_config_aqm_unit(ndev); | |
| nitrox_config_nps_pkt_unit(ndev); | |
| nitrox_config_pom_unit(ndev); | |
| nitrox_config_efl_unit(ndev); | |
| /* configure IO units */ | |
| nitrox_config_bmi_unit(ndev); | |
| nitrox_config_bmo_unit(ndev); | |
| /* configure Local Buffer Cache */ | |
| nitrox_config_lbc_unit(ndev); | |
| nitrox_config_rand_unit(ndev); | |
| /* load firmware on cores */ | |
| err = nitrox_load_fw(ndev); | |
| if (err) | |
| return err; | |
| nitrox_config_emu_unit(ndev); | |
| return 0; | |
| } | |
| /** | |
| * nitrox_probe - NITROX Initialization function. | |
| * @pdev: PCI device information struct | |
| * @id: entry in nitrox_pci_tbl | |
| * | |
| * Return: 0, if the driver is bound to the device, or | |
| * a negative error if there is failure. | |
| */ | |
| static int nitrox_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| struct nitrox_device *ndev; | |
| int err; | |
| dev_info_once(&pdev->dev, "%s driver version %s\n", | |
| nitrox_driver_name, DRIVER_VERSION); | |
| err = pci_enable_device_mem(pdev); | |
| if (err) | |
| return err; | |
| /* do FLR */ | |
| err = nitrox_device_flr(pdev); | |
| if (err) { | |
| dev_err(&pdev->dev, "FLR failed\n"); | |
| goto flr_fail; | |
| } | |
| if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { | |
| dev_dbg(&pdev->dev, "DMA to 64-BIT address\n"); | |
| } else { | |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (err) { | |
| dev_err(&pdev->dev, "DMA configuration failed\n"); | |
| goto flr_fail; | |
| } | |
| } | |
| err = pci_request_mem_regions(pdev, nitrox_driver_name); | |
| if (err) | |
| goto flr_fail; | |
| pci_set_master(pdev); | |
| ndev = kzalloc(sizeof(*ndev), GFP_KERNEL); | |
| if (!ndev) { | |
| err = -ENOMEM; | |
| goto ndev_fail; | |
| } | |
| pci_set_drvdata(pdev, ndev); | |
| ndev->pdev = pdev; | |
| /* add to device list */ | |
| nitrox_add_to_devlist(ndev); | |
| ndev->hw.vendor_id = pdev->vendor; | |
| ndev->hw.device_id = pdev->device; | |
| ndev->hw.revision_id = pdev->revision; | |
| /* command timeout in jiffies */ | |
| ndev->timeout = msecs_to_jiffies(CMD_TIMEOUT); | |
| ndev->node = dev_to_node(&pdev->dev); | |
| if (ndev->node == NUMA_NO_NODE) | |
| ndev->node = 0; | |
| ndev->bar_addr = ioremap(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| if (!ndev->bar_addr) { | |
| err = -EIO; | |
| goto ioremap_err; | |
| } | |
| /* allocate command queus based on cpus, max queues are 64 */ | |
| ndev->nr_queues = min_t(u32, MAX_PF_QUEUES, num_online_cpus()); | |
| ndev->qlen = qlen; | |
| err = nitrox_pf_sw_init(ndev); | |
| if (err) | |
| goto pf_sw_fail; | |
| err = nitrox_pf_hw_init(ndev); | |
| if (err) | |
| goto pf_hw_fail; | |
| nitrox_debugfs_init(ndev); | |
| /* clear the statistics */ | |
| atomic64_set(&ndev->stats.posted, 0); | |
| atomic64_set(&ndev->stats.completed, 0); | |
| atomic64_set(&ndev->stats.dropped, 0); | |
| atomic_set(&ndev->state, __NDEV_READY); | |
| /* barrier to sync with other cpus */ | |
| smp_mb__after_atomic(); | |
| err = nitrox_crypto_register(); | |
| if (err) | |
| goto crypto_fail; | |
| return 0; | |
| crypto_fail: | |
| nitrox_debugfs_exit(ndev); | |
| atomic_set(&ndev->state, __NDEV_NOT_READY); | |
| /* barrier to sync with other cpus */ | |
| smp_mb__after_atomic(); | |
| pf_hw_fail: | |
| nitrox_pf_sw_cleanup(ndev); | |
| pf_sw_fail: | |
| iounmap(ndev->bar_addr); | |
| ioremap_err: | |
| nitrox_remove_from_devlist(ndev); | |
| kfree(ndev); | |
| pci_set_drvdata(pdev, NULL); | |
| ndev_fail: | |
| pci_release_mem_regions(pdev); | |
| flr_fail: | |
| pci_disable_device(pdev); | |
| return err; | |
| } | |
| /** | |
| * nitrox_remove - Unbind the driver from the device. | |
| * @pdev: PCI device information struct | |
| */ | |
| static void nitrox_remove(struct pci_dev *pdev) | |
| { | |
| struct nitrox_device *ndev = pci_get_drvdata(pdev); | |
| if (!ndev) | |
| return; | |
| if (!refcount_dec_and_test(&ndev->refcnt)) { | |
| dev_err(DEV(ndev), "Device refcnt not zero (%d)\n", | |
| refcount_read(&ndev->refcnt)); | |
| return; | |
| } | |
| dev_info(DEV(ndev), "Removing Device %x:%x\n", | |
| ndev->hw.vendor_id, ndev->hw.device_id); | |
| atomic_set(&ndev->state, __NDEV_NOT_READY); | |
| /* barrier to sync with other cpus */ | |
| smp_mb__after_atomic(); | |
| nitrox_remove_from_devlist(ndev); | |
| /* disable SR-IOV */ | |
| nitrox_sriov_configure(pdev, 0); | |
| nitrox_crypto_unregister(); | |
| nitrox_debugfs_exit(ndev); | |
| nitrox_pf_sw_cleanup(ndev); | |
| iounmap(ndev->bar_addr); | |
| kfree(ndev); | |
| pci_set_drvdata(pdev, NULL); | |
| pci_release_mem_regions(pdev); | |
| pci_disable_device(pdev); | |
| } | |
| static void nitrox_shutdown(struct pci_dev *pdev) | |
| { | |
| pci_set_drvdata(pdev, NULL); | |
| pci_release_mem_regions(pdev); | |
| pci_disable_device(pdev); | |
| } | |
| static struct pci_driver nitrox_driver = { | |
| .name = nitrox_driver_name, | |
| .id_table = nitrox_pci_tbl, | |
| .probe = nitrox_probe, | |
| .remove = nitrox_remove, | |
| .shutdown = nitrox_shutdown, | |
| .sriov_configure = nitrox_sriov_configure, | |
| }; | |
| module_pci_driver(nitrox_driver); | |
| MODULE_AUTHOR("Srikanth Jampala <Jampala.Srikanth@cavium.com>"); | |
| MODULE_DESCRIPTION("Cavium CNN55XX PF Driver" DRIVER_VERSION " "); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(DRIVER_VERSION); | |
| MODULE_FIRMWARE(SE_FW); |