| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term * | |
| * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * | |
| * Copyright (C) 2004-2013 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.broadcom.com * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ | |
| #define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */ | |
| #define FC_MAXLOOP 126 /* max devices supported on a fc loop */ | |
| #define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ | |
| /* This is the protocol dependent definition for a Node List Entry. | |
| * This is used by Fibre Channel protocol to support FCP. | |
| */ | |
| /* worker thread events */ | |
| enum lpfc_work_type { | |
| LPFC_EVT_ONLINE, | |
| LPFC_EVT_OFFLINE_PREP, | |
| LPFC_EVT_OFFLINE, | |
| LPFC_EVT_WARM_START, | |
| LPFC_EVT_KILL, | |
| LPFC_EVT_ELS_RETRY, | |
| LPFC_EVT_DEV_LOSS, | |
| LPFC_EVT_FASTPATH_MGMT_EVT, | |
| LPFC_EVT_RESET_HBA, | |
| LPFC_EVT_RECOVER_PORT | |
| }; | |
| /* structure used to queue event to the discovery tasklet */ | |
| struct lpfc_work_evt { | |
| struct list_head evt_listp; | |
| void *evt_arg1; | |
| void *evt_arg2; | |
| enum lpfc_work_type evt; | |
| }; | |
| struct lpfc_scsi_check_condition_event; | |
| struct lpfc_scsi_varqueuedepth_event; | |
| struct lpfc_scsi_event_header; | |
| struct lpfc_fabric_event_header; | |
| struct lpfc_fcprdchkerr_event; | |
| /* structure used for sending events from fast path */ | |
| struct lpfc_fast_path_event { | |
| struct lpfc_work_evt work_evt; | |
| struct lpfc_vport *vport; | |
| union { | |
| struct lpfc_scsi_check_condition_event check_cond_evt; | |
| struct lpfc_scsi_varqueuedepth_event queue_depth_evt; | |
| struct lpfc_scsi_event_header scsi_evt; | |
| struct lpfc_fabric_event_header fabric_evt; | |
| struct lpfc_fcprdchkerr_event read_check_error; | |
| } un; | |
| }; | |
| #define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */ | |
| #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG) | |
| struct lpfc_node_rrqs { | |
| unsigned long xri_bitmap[XRI_BITMAP_ULONGS]; | |
| }; | |
| enum lpfc_fc4_xpt_flags { | |
| NLP_XPT_REGD = 0x1, | |
| SCSI_XPT_REGD = 0x2, | |
| NVME_XPT_REGD = 0x4, | |
| NVME_XPT_UNREG_WAIT = 0x8, | |
| NLP_XPT_HAS_HH = 0x10 | |
| }; | |
| enum lpfc_nlp_save_flags { | |
| /* devloss occurred during recovery */ | |
| NLP_IN_RECOV_POST_DEV_LOSS = 0x1, | |
| /* wait for outstanding LOGO to cmpl */ | |
| NLP_WAIT_FOR_LOGO = 0x2, | |
| }; | |
| struct lpfc_nodelist { | |
| struct list_head nlp_listp; | |
| struct serv_parm fc_sparam; /* buffer for service params */ | |
| struct lpfc_name nlp_portname; | |
| struct lpfc_name nlp_nodename; | |
| spinlock_t lock; /* Node management lock */ | |
| uint32_t nlp_flag; /* entry flags */ | |
| uint32_t nlp_DID; /* FC D_ID of entry */ | |
| uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ | |
| uint16_t nlp_type; | |
| #define NLP_FC_NODE 0x1 /* entry is an FC node */ | |
| #define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ | |
| #define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ | |
| #define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ | |
| #define NLP_NVME_TARGET 0x20 /* entry is a NVME Target */ | |
| #define NLP_NVME_INITIATOR 0x40 /* entry is a NVME Initiator */ | |
| #define NLP_NVME_DISCOVERY 0x80 /* entry has NVME disc srvc */ | |
| uint16_t nlp_fc4_type; /* FC types node supports. */ | |
| /* Assigned from GID_FF, only | |
| * FCP (0x8) and NVME (0x28) | |
| * supported. | |
| */ | |
| #define NLP_FC4_NONE 0x0 | |
| #define NLP_FC4_FCP 0x1 /* FC4 Type FCP (value x8)) */ | |
| #define NLP_FC4_NVME 0x2 /* FC4 TYPE NVME (value x28) */ | |
| uint16_t nlp_rpi; | |
| uint16_t nlp_state; /* state transition indicator */ | |
| uint16_t nlp_prev_state; /* state transition indicator */ | |
| uint16_t nlp_xri; /* output exchange id for RPI */ | |
| uint16_t nlp_sid; /* scsi id */ | |
| #define NLP_NO_SID 0xffff | |
| uint16_t nlp_maxframe; /* Max RCV frame size */ | |
| uint8_t nlp_class_sup; /* Supported Classes */ | |
| uint8_t nlp_retry; /* used for ELS retries */ | |
| uint8_t nlp_fcp_info; /* class info, bits 0-3 */ | |
| #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ | |
| u8 nlp_nvme_info; /* NVME NSLER Support */ | |
| uint8_t vmid_support; /* destination VMID support */ | |
| #define NLP_NVME_NSLER 0x1 /* NVME NSLER device */ | |
| struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ | |
| struct lpfc_hba *phba; | |
| struct fc_rport *rport; /* scsi_transport_fc port structure */ | |
| struct lpfc_nvme_rport *nrport; /* nvme transport rport struct. */ | |
| struct lpfc_vport *vport; | |
| struct lpfc_work_evt els_retry_evt; | |
| struct lpfc_work_evt dev_loss_evt; | |
| struct lpfc_work_evt recovery_evt; | |
| struct kref kref; | |
| atomic_t cmd_pending; | |
| uint32_t cmd_qdepth; | |
| unsigned long last_change_time; | |
| unsigned long *active_rrqs_xri_bitmap; | |
| struct lpfc_scsicmd_bkt *lat_data; /* Latency data */ | |
| uint32_t fc4_prli_sent; | |
| /* flags to keep ndlp alive until special conditions are met */ | |
| enum lpfc_nlp_save_flags save_flags; | |
| enum lpfc_fc4_xpt_flags fc4_xpt_flags; | |
| uint32_t nvme_fb_size; /* NVME target's supported byte cnt */ | |
| #define NVME_FB_BIT_SHIFT 9 /* PRLI Rsp first burst in 512B units. */ | |
| uint32_t nlp_defer_did; | |
| wait_queue_head_t *logo_waitq; | |
| }; | |
| struct lpfc_node_rrq { | |
| struct list_head list; | |
| uint16_t xritag; | |
| uint16_t send_rrq; | |
| uint16_t rxid; | |
| uint32_t nlp_DID; /* FC D_ID of entry */ | |
| struct lpfc_vport *vport; | |
| unsigned long rrq_stop_time; | |
| }; | |
| #define lpfc_ndlp_check_qdepth(phba, ndlp) \ | |
| (ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri) | |
| /* Defines for nlp_flag (uint32) */ | |
| #define NLP_IGNR_REG_CMPL 0x00000001 /* Rcvd rscn before we cmpl reg login */ | |
| #define NLP_REG_LOGIN_SEND 0x00000002 /* sent reglogin to adapter */ | |
| #define NLP_RELEASE_RPI 0x00000004 /* Release RPI to free pool */ | |
| #define NLP_SUPPRESS_RSP 0x00000010 /* Remote NPort supports suppress rsp */ | |
| #define NLP_PLOGI_SND 0x00000020 /* sent PLOGI request for this entry */ | |
| #define NLP_PRLI_SND 0x00000040 /* sent PRLI request for this entry */ | |
| #define NLP_ADISC_SND 0x00000080 /* sent ADISC request for this entry */ | |
| #define NLP_LOGO_SND 0x00000100 /* sent LOGO request for this entry */ | |
| #define NLP_RNID_SND 0x00000400 /* sent RNID request for this entry */ | |
| #define NLP_ELS_SND_MASK 0x000007e0 /* sent ELS request for this entry */ | |
| #define NLP_NVMET_RECOV 0x00001000 /* NVMET auditing node for recovery. */ | |
| #define NLP_FCP_PRLI_RJT 0x00002000 /* Rport does not support FCP PRLI. */ | |
| #define NLP_UNREG_INP 0x00008000 /* UNREG_RPI cmd is in progress */ | |
| #define NLP_DROPPED 0x00010000 /* Init ref count has been dropped */ | |
| #define NLP_DELAY_TMO 0x00020000 /* delay timeout is running for node */ | |
| #define NLP_NPR_2B_DISC 0x00040000 /* node is included in num_disc_nodes */ | |
| #define NLP_RCV_PLOGI 0x00080000 /* Rcv'ed PLOGI from remote system */ | |
| #define NLP_LOGO_ACC 0x00100000 /* Process LOGO after ACC completes */ | |
| #define NLP_TGT_NO_SCSIID 0x00200000 /* good PRLI but no binding for scsid */ | |
| #define NLP_ISSUE_LOGO 0x00400000 /* waiting to issue a LOGO */ | |
| #define NLP_IN_DEV_LOSS 0x00800000 /* devloss in progress */ | |
| #define NLP_ACC_REGLOGIN 0x01000000 /* Issue Reg Login after successful | |
| ACC */ | |
| #define NLP_NPR_ADISC 0x02000000 /* Issue ADISC when dq'ed from | |
| NPR list */ | |
| #define NLP_RM_DFLT_RPI 0x04000000 /* need to remove leftover dflt RPI */ | |
| #define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */ | |
| #define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */ | |
| #define NLP_SC_REQ 0x20000000 /* Target requires authentication */ | |
| #define NLP_FIRSTBURST 0x40000000 /* Target supports FirstBurst */ | |
| #define NLP_RPI_REGISTERED 0x80000000 /* nlp_rpi is valid */ | |
| /* There are 4 different double linked lists nodelist entries can reside on. | |
| * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used | |
| * when Link Up discovery or Registered State Change Notification (RSCN) | |
| * processing is needed. Each list holds the nodes that require a PLOGI or | |
| * ADISC Extended Link Service (ELS) request. These lists keep track of the | |
| * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected | |
| * by Link Up) event. The unmapped_list contains all nodes that have | |
| * successfully logged into at the Fibre Channel level. The | |
| * mapped_list will contain all nodes that are mapped FCP targets. | |
| * | |
| * The bind list is a list of undiscovered (potentially non-existent) nodes | |
| * that we have saved binding information on. This information is used when | |
| * nodes transition from the unmapped to the mapped list. | |
| */ | |
| /* Defines for nlp_state */ | |
| #define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ | |
| #define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ | |
| #define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ | |
| #define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ | |
| #define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ | |
| #define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */ | |
| #define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */ | |
| #define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */ | |
| #define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */ | |
| #define NLP_STE_MAX_STATE 0x9 | |
| #define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ | |
| /* For UNUSED_NODE state, the node has just been allocated. | |
| * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on | |
| * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list | |
| * and put on the unmapped list. For ADISC processing, the node is taken off | |
| * the ADISC list and placed on either the mapped or unmapped list (depending | |
| * on its previous state). Once on the unmapped list, a PRLI is issued and the | |
| * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is | |
| * changed to PRLI_COMPL. If the completion indicates a mapped | |
| * node, the node is taken off the unmapped list. The binding list is checked | |
| * for a valid binding, or a binding is automatically assigned. If binding | |
| * assignment is unsuccessful, the node is left on the unmapped list. If | |
| * binding assignment is successful, the associated binding list entry (if | |
| * any) is removed, and the node is placed on the mapped list. | |
| */ | |
| /* | |
| * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped | |
| * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers | |
| * expire, all effected nodes will receive a DEVICE_RM event. | |
| */ | |
| /* | |
| * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists | |
| * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap | |
| * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / | |
| * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, | |
| * we will first process the ADISC list. 32 entries are processed initially and | |
| * ADISC is initited for each one. Completions / Events for each node are | |
| * funnelled thru the state machine. As each node finishes ADISC processing, it | |
| * starts ADISC for any nodes waiting for ADISC processing. If no nodes are | |
| * waiting, and the ADISC list count is identically 0, then we are done. For | |
| * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we | |
| * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI | |
| * list. 32 entries are processed initially and PLOGI is initited for each one. | |
| * Completions / Events for each node are funnelled thru the state machine. As | |
| * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting | |
| * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is | |
| * identically 0, then we are done. We have now completed discovery / RSCN | |
| * handling. Upon completion, ALL nodes should be on either the mapped or | |
| * unmapped lists. | |
| */ | |
| /* Defines for Node List Entry Events that could happen */ | |
| #define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ | |
| #define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ | |
| #define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ | |
| #define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ | |
| #define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ | |
| #define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ | |
| #define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ | |
| #define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ | |
| #define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ | |
| #define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ | |
| #define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ | |
| #define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ | |
| #define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ | |
| #define NLP_EVT_MAX_EVENT 0xd | |
| #define NLP_EVT_NOTHING_PENDING 0xff |