| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012,2013 - ARM Ltd | |
| * Author: Marc Zyngier <marc.zyngier@arm.com> | |
| * | |
| * Derived from arch/arm/kvm/handle_exit.c: | |
| * Copyright (C) 2012 - Virtual Open Systems and Columbia University | |
| * Author: Christoffer Dall <c.dall@virtualopensystems.com> | |
| */ | |
| #include <linux/kvm.h> | |
| #include <linux/kvm_host.h> | |
| #include <asm/esr.h> | |
| #include <asm/exception.h> | |
| #include <asm/kvm_asm.h> | |
| #include <asm/kvm_emulate.h> | |
| #include <asm/kvm_mmu.h> | |
| #include <asm/debug-monitors.h> | |
| #include <asm/traps.h> | |
| #include <kvm/arm_hypercalls.h> | |
| #define CREATE_TRACE_POINTS | |
| #include "trace_handle_exit.h" | |
| typedef int (*exit_handle_fn)(struct kvm_vcpu *); | |
| static void kvm_handle_guest_serror(struct kvm_vcpu *vcpu, u32 esr) | |
| { | |
| if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(NULL, esr)) | |
| kvm_inject_vabt(vcpu); | |
| } | |
| static int handle_hvc(struct kvm_vcpu *vcpu) | |
| { | |
| int ret; | |
| trace_kvm_hvc_arm64(*vcpu_pc(vcpu), vcpu_get_reg(vcpu, 0), | |
| kvm_vcpu_hvc_get_imm(vcpu)); | |
| vcpu->stat.hvc_exit_stat++; | |
| ret = kvm_hvc_call_handler(vcpu); | |
| if (ret < 0) { | |
| vcpu_set_reg(vcpu, 0, ~0UL); | |
| return 1; | |
| } | |
| return ret; | |
| } | |
| static int handle_smc(struct kvm_vcpu *vcpu) | |
| { | |
| /* | |
| * "If an SMC instruction executed at Non-secure EL1 is | |
| * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a | |
| * Trap exception, not a Secure Monitor Call exception [...]" | |
| * | |
| * We need to advance the PC after the trap, as it would | |
| * otherwise return to the same address... | |
| */ | |
| vcpu_set_reg(vcpu, 0, ~0UL); | |
| kvm_incr_pc(vcpu); | |
| return 1; | |
| } | |
| /* | |
| * Guest access to FP/ASIMD registers are routed to this handler only | |
| * when the system doesn't support FP/ASIMD. | |
| */ | |
| static int handle_no_fpsimd(struct kvm_vcpu *vcpu) | |
| { | |
| kvm_inject_undefined(vcpu); | |
| return 1; | |
| } | |
| /** | |
| * kvm_handle_wfx - handle a wait-for-interrupts or wait-for-event | |
| * instruction executed by a guest | |
| * | |
| * @vcpu: the vcpu pointer | |
| * | |
| * WFE: Yield the CPU and come back to this vcpu when the scheduler | |
| * decides to. | |
| * WFI: Simply call kvm_vcpu_block(), which will halt execution of | |
| * world-switches and schedule other host processes until there is an | |
| * incoming IRQ or FIQ to the VM. | |
| */ | |
| static int kvm_handle_wfx(struct kvm_vcpu *vcpu) | |
| { | |
| if (kvm_vcpu_get_esr(vcpu) & ESR_ELx_WFx_ISS_WFE) { | |
| trace_kvm_wfx_arm64(*vcpu_pc(vcpu), true); | |
| vcpu->stat.wfe_exit_stat++; | |
| kvm_vcpu_on_spin(vcpu, vcpu_mode_priv(vcpu)); | |
| } else { | |
| trace_kvm_wfx_arm64(*vcpu_pc(vcpu), false); | |
| vcpu->stat.wfi_exit_stat++; | |
| kvm_vcpu_block(vcpu); | |
| kvm_clear_request(KVM_REQ_UNHALT, vcpu); | |
| } | |
| kvm_incr_pc(vcpu); | |
| return 1; | |
| } | |
| /** | |
| * kvm_handle_guest_debug - handle a debug exception instruction | |
| * | |
| * @vcpu: the vcpu pointer | |
| * | |
| * We route all debug exceptions through the same handler. If both the | |
| * guest and host are using the same debug facilities it will be up to | |
| * userspace to re-inject the correct exception for guest delivery. | |
| * | |
| * @return: 0 (while setting vcpu->run->exit_reason) | |
| */ | |
| static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu) | |
| { | |
| struct kvm_run *run = vcpu->run; | |
| u32 esr = kvm_vcpu_get_esr(vcpu); | |
| run->exit_reason = KVM_EXIT_DEBUG; | |
| run->debug.arch.hsr = esr; | |
| if (ESR_ELx_EC(esr) == ESR_ELx_EC_WATCHPT_LOW) | |
| run->debug.arch.far = vcpu->arch.fault.far_el2; | |
| return 0; | |
| } | |
| static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu) | |
| { | |
| u32 esr = kvm_vcpu_get_esr(vcpu); | |
| kvm_pr_unimpl("Unknown exception class: esr: %#08x -- %s\n", | |
| esr, esr_get_class_string(esr)); | |
| kvm_inject_undefined(vcpu); | |
| return 1; | |
| } | |
| static int handle_sve(struct kvm_vcpu *vcpu) | |
| { | |
| /* Until SVE is supported for guests: */ | |
| kvm_inject_undefined(vcpu); | |
| return 1; | |
| } | |
| /* | |
| * Guest usage of a ptrauth instruction (which the guest EL1 did not turn into | |
| * a NOP). If we get here, it is that we didn't fixup ptrauth on exit, and all | |
| * that we can do is give the guest an UNDEF. | |
| */ | |
| static int kvm_handle_ptrauth(struct kvm_vcpu *vcpu) | |
| { | |
| kvm_inject_undefined(vcpu); | |
| return 1; | |
| } | |
| static exit_handle_fn arm_exit_handlers[] = { | |
| [0 ... ESR_ELx_EC_MAX] = kvm_handle_unknown_ec, | |
| [ESR_ELx_EC_WFx] = kvm_handle_wfx, | |
| [ESR_ELx_EC_CP15_32] = kvm_handle_cp15_32, | |
| [ESR_ELx_EC_CP15_64] = kvm_handle_cp15_64, | |
| [ESR_ELx_EC_CP14_MR] = kvm_handle_cp14_32, | |
| [ESR_ELx_EC_CP14_LS] = kvm_handle_cp14_load_store, | |
| [ESR_ELx_EC_CP14_64] = kvm_handle_cp14_64, | |
| [ESR_ELx_EC_HVC32] = handle_hvc, | |
| [ESR_ELx_EC_SMC32] = handle_smc, | |
| [ESR_ELx_EC_HVC64] = handle_hvc, | |
| [ESR_ELx_EC_SMC64] = handle_smc, | |
| [ESR_ELx_EC_SYS64] = kvm_handle_sys_reg, | |
| [ESR_ELx_EC_SVE] = handle_sve, | |
| [ESR_ELx_EC_IABT_LOW] = kvm_handle_guest_abort, | |
| [ESR_ELx_EC_DABT_LOW] = kvm_handle_guest_abort, | |
| [ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug, | |
| [ESR_ELx_EC_WATCHPT_LOW]= kvm_handle_guest_debug, | |
| [ESR_ELx_EC_BREAKPT_LOW]= kvm_handle_guest_debug, | |
| [ESR_ELx_EC_BKPT32] = kvm_handle_guest_debug, | |
| [ESR_ELx_EC_BRK64] = kvm_handle_guest_debug, | |
| [ESR_ELx_EC_FP_ASIMD] = handle_no_fpsimd, | |
| [ESR_ELx_EC_PAC] = kvm_handle_ptrauth, | |
| }; | |
| static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) | |
| { | |
| u32 esr = kvm_vcpu_get_esr(vcpu); | |
| u8 esr_ec = ESR_ELx_EC(esr); | |
| return arm_exit_handlers[esr_ec]; | |
| } | |
| /* | |
| * We may be single-stepping an emulated instruction. If the emulation | |
| * has been completed in the kernel, we can return to userspace with a | |
| * KVM_EXIT_DEBUG, otherwise userspace needs to complete its | |
| * emulation first. | |
| */ | |
| static int handle_trap_exceptions(struct kvm_vcpu *vcpu) | |
| { | |
| int handled; | |
| /* | |
| * See ARM ARM B1.14.1: "Hyp traps on instructions | |
| * that fail their condition code check" | |
| */ | |
| if (!kvm_condition_valid(vcpu)) { | |
| kvm_incr_pc(vcpu); | |
| handled = 1; | |
| } else { | |
| exit_handle_fn exit_handler; | |
| exit_handler = kvm_get_exit_handler(vcpu); | |
| handled = exit_handler(vcpu); | |
| } | |
| return handled; | |
| } | |
| /* | |
| * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on | |
| * proper exit to userspace. | |
| */ | |
| int handle_exit(struct kvm_vcpu *vcpu, int exception_index) | |
| { | |
| struct kvm_run *run = vcpu->run; | |
| exception_index = ARM_EXCEPTION_CODE(exception_index); | |
| switch (exception_index) { | |
| case ARM_EXCEPTION_IRQ: | |
| return 1; | |
| case ARM_EXCEPTION_EL1_SERROR: | |
| return 1; | |
| case ARM_EXCEPTION_TRAP: | |
| return handle_trap_exceptions(vcpu); | |
| case ARM_EXCEPTION_HYP_GONE: | |
| /* | |
| * EL2 has been reset to the hyp-stub. This happens when a guest | |
| * is pre-empted by kvm_reboot()'s shutdown call. | |
| */ | |
| run->exit_reason = KVM_EXIT_FAIL_ENTRY; | |
| return 0; | |
| case ARM_EXCEPTION_IL: | |
| /* | |
| * We attempted an illegal exception return. Guest state must | |
| * have been corrupted somehow. Give up. | |
| */ | |
| run->exit_reason = KVM_EXIT_FAIL_ENTRY; | |
| return -EINVAL; | |
| default: | |
| kvm_pr_unimpl("Unsupported exception type: %d", | |
| exception_index); | |
| run->exit_reason = KVM_EXIT_INTERNAL_ERROR; | |
| return 0; | |
| } | |
| } | |
| /* For exit types that need handling before we can be preempted */ | |
| void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index) | |
| { | |
| if (ARM_SERROR_PENDING(exception_index)) { | |
| if (this_cpu_has_cap(ARM64_HAS_RAS_EXTN)) { | |
| u64 disr = kvm_vcpu_get_disr(vcpu); | |
| kvm_handle_guest_serror(vcpu, disr_to_esr(disr)); | |
| } else { | |
| kvm_inject_vabt(vcpu); | |
| } | |
| return; | |
| } | |
| exception_index = ARM_EXCEPTION_CODE(exception_index); | |
| if (exception_index == ARM_EXCEPTION_EL1_SERROR) | |
| kvm_handle_guest_serror(vcpu, kvm_vcpu_get_esr(vcpu)); | |
| } | |
| void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, | |
| u64 elr_virt, u64 elr_phys, | |
| u64 par, uintptr_t vcpu, | |
| u64 far, u64 hpfar) { | |
| u64 elr_in_kimg = __phys_to_kimg(elr_phys); | |
| u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr_virt; | |
| u64 mode = spsr & PSR_MODE_MASK; | |
| /* | |
| * The nVHE hyp symbols are not included by kallsyms to avoid issues | |
| * with aliasing. That means that the symbols cannot be printed with the | |
| * "%pS" format specifier, so fall back to the vmlinux address if | |
| * there's no better option. | |
| */ | |
| if (mode != PSR_MODE_EL2t && mode != PSR_MODE_EL2h) { | |
| kvm_err("Invalid host exception to nVHE hyp!\n"); | |
| } else if (ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 && | |
| (esr & ESR_ELx_BRK64_ISS_COMMENT_MASK) == BUG_BRK_IMM) { | |
| const char *file = NULL; | |
| unsigned int line = 0; | |
| /* All hyp bugs, including warnings, are treated as fatal. */ | |
| if (!is_protected_kvm_enabled() || | |
| IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) { | |
| struct bug_entry *bug = find_bug(elr_in_kimg); | |
| if (bug) | |
| bug_get_file_line(bug, &file, &line); | |
| } | |
| if (file) | |
| kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line); | |
| else | |
| kvm_err("nVHE hyp BUG at: %016llx!\n", elr_virt + hyp_offset); | |
| } else { | |
| kvm_err("nVHE hyp panic at: %016llx!\n", elr_virt + hyp_offset); | |
| } | |
| /* | |
| * Hyp has panicked and we're going to handle that by panicking the | |
| * kernel. The kernel offset will be revealed in the panic so we're | |
| * also safe to reveal the hyp offset as a debugging aid for translating | |
| * hyp VAs to vmlinux addresses. | |
| */ | |
| kvm_err("Hyp Offset: 0x%llx\n", hyp_offset); | |
| panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%016lx\n", | |
| spsr, elr_virt, esr, far, hpfar, par, vcpu); | |
| } |