| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * | |
| * Parts of this file are based on Ralink's 2.6.21 BSP | |
| * | |
| * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> | |
| * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> | |
| * Copyright (C) 2013 John Crispin <john@phrozen.org> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/mach-ralink/ralink_regs.h> | |
| #include <asm/mach-ralink/rt288x.h> | |
| #include "common.h" | |
| void __init ralink_clk_init(void) | |
| { | |
| unsigned long cpu_rate, wmac_rate = 40000000; | |
| u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); | |
| t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); | |
| switch (t) { | |
| case SYSTEM_CONFIG_CPUCLK_250: | |
| cpu_rate = 250000000; | |
| break; | |
| case SYSTEM_CONFIG_CPUCLK_266: | |
| cpu_rate = 266666667; | |
| break; | |
| case SYSTEM_CONFIG_CPUCLK_280: | |
| cpu_rate = 280000000; | |
| break; | |
| case SYSTEM_CONFIG_CPUCLK_300: | |
| cpu_rate = 300000000; | |
| break; | |
| } | |
| ralink_clk_add("cpu", cpu_rate); | |
| ralink_clk_add("300100.timer", cpu_rate / 2); | |
| ralink_clk_add("300120.watchdog", cpu_rate / 2); | |
| ralink_clk_add("300500.uart", cpu_rate / 2); | |
| ralink_clk_add("300900.i2c", cpu_rate / 2); | |
| ralink_clk_add("300c00.uartlite", cpu_rate / 2); | |
| ralink_clk_add("400000.ethernet", cpu_rate / 2); | |
| ralink_clk_add("480000.wmac", wmac_rate); | |
| } | |
| void __init ralink_of_remap(void) | |
| { | |
| rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); | |
| rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); | |
| if (!rt_sysc_membase || !rt_memc_membase) | |
| panic("Failed to remap core resources"); | |
| } | |
| void __init prom_soc_init(struct ralink_soc_info *soc_info) | |
| { | |
| void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); | |
| const char *name; | |
| u32 n0; | |
| u32 n1; | |
| u32 id; | |
| n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); | |
| n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); | |
| id = __raw_readl(sysc + SYSC_REG_CHIP_ID); | |
| if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { | |
| soc_info->compatible = "ralink,r2880-soc"; | |
| name = "RT2880"; | |
| } else { | |
| panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); | |
| } | |
| snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, | |
| "Ralink %s id:%u rev:%u", | |
| name, | |
| (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, | |
| (id & CHIP_ID_REV_MASK)); | |
| soc_info->mem_base = RT2880_SDRAM_BASE; | |
| soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; | |
| soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; | |
| ralink_soc = RT2880_SOC; | |
| } |