| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * System Control and Management Interface (SCMI) Clock Protocol | |
| * | |
| * Copyright (C) 2018-2021 ARM Ltd. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/sort.h> | |
| #include "common.h" | |
| enum scmi_clock_protocol_cmd { | |
| CLOCK_ATTRIBUTES = 0x3, | |
| CLOCK_DESCRIBE_RATES = 0x4, | |
| CLOCK_RATE_SET = 0x5, | |
| CLOCK_RATE_GET = 0x6, | |
| CLOCK_CONFIG_SET = 0x7, | |
| }; | |
| struct scmi_msg_resp_clock_protocol_attributes { | |
| __le16 num_clocks; | |
| u8 max_async_req; | |
| u8 reserved; | |
| }; | |
| struct scmi_msg_resp_clock_attributes { | |
| __le32 attributes; | |
| #define CLOCK_ENABLE BIT(0) | |
| u8 name[SCMI_MAX_STR_SIZE]; | |
| }; | |
| struct scmi_clock_set_config { | |
| __le32 id; | |
| __le32 attributes; | |
| }; | |
| struct scmi_msg_clock_describe_rates { | |
| __le32 id; | |
| __le32 rate_index; | |
| }; | |
| struct scmi_msg_resp_clock_describe_rates { | |
| __le32 num_rates_flags; | |
| #define NUM_RETURNED(x) ((x) & 0xfff) | |
| #define RATE_DISCRETE(x) !((x) & BIT(12)) | |
| #define NUM_REMAINING(x) ((x) >> 16) | |
| struct { | |
| __le32 value_low; | |
| __le32 value_high; | |
| } rate[0]; | |
| #define RATE_TO_U64(X) \ | |
| ({ \ | |
| typeof(X) x = (X); \ | |
| le32_to_cpu((x).value_low) | (u64)le32_to_cpu((x).value_high) << 32; \ | |
| }) | |
| }; | |
| struct scmi_clock_set_rate { | |
| __le32 flags; | |
| #define CLOCK_SET_ASYNC BIT(0) | |
| #define CLOCK_SET_IGNORE_RESP BIT(1) | |
| #define CLOCK_SET_ROUND_UP BIT(2) | |
| #define CLOCK_SET_ROUND_AUTO BIT(3) | |
| __le32 id; | |
| __le32 value_low; | |
| __le32 value_high; | |
| }; | |
| struct clock_info { | |
| u32 version; | |
| int num_clocks; | |
| int max_async_req; | |
| atomic_t cur_async_req; | |
| struct scmi_clock_info *clk; | |
| }; | |
| static int | |
| scmi_clock_protocol_attributes_get(const struct scmi_protocol_handle *ph, | |
| struct clock_info *ci) | |
| { | |
| int ret; | |
| struct scmi_xfer *t; | |
| struct scmi_msg_resp_clock_protocol_attributes *attr; | |
| ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, | |
| 0, sizeof(*attr), &t); | |
| if (ret) | |
| return ret; | |
| attr = t->rx.buf; | |
| ret = ph->xops->do_xfer(ph, t); | |
| if (!ret) { | |
| ci->num_clocks = le16_to_cpu(attr->num_clocks); | |
| ci->max_async_req = attr->max_async_req; | |
| } | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph, | |
| u32 clk_id, struct scmi_clock_info *clk) | |
| { | |
| int ret; | |
| struct scmi_xfer *t; | |
| struct scmi_msg_resp_clock_attributes *attr; | |
| ret = ph->xops->xfer_get_init(ph, CLOCK_ATTRIBUTES, | |
| sizeof(clk_id), sizeof(*attr), &t); | |
| if (ret) | |
| return ret; | |
| put_unaligned_le32(clk_id, t->tx.buf); | |
| attr = t->rx.buf; | |
| ret = ph->xops->do_xfer(ph, t); | |
| if (!ret) | |
| strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE); | |
| else | |
| clk->name[0] = '\0'; | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int rate_cmp_func(const void *_r1, const void *_r2) | |
| { | |
| const u64 *r1 = _r1, *r2 = _r2; | |
| if (*r1 < *r2) | |
| return -1; | |
| else if (*r1 == *r2) | |
| return 0; | |
| else | |
| return 1; | |
| } | |
| static int | |
| scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id, | |
| struct scmi_clock_info *clk) | |
| { | |
| u64 *rate = NULL; | |
| int ret, cnt; | |
| bool rate_discrete = false; | |
| u32 tot_rate_cnt = 0, rates_flag; | |
| u16 num_returned, num_remaining; | |
| struct scmi_xfer *t; | |
| struct scmi_msg_clock_describe_rates *clk_desc; | |
| struct scmi_msg_resp_clock_describe_rates *rlist; | |
| ret = ph->xops->xfer_get_init(ph, CLOCK_DESCRIBE_RATES, | |
| sizeof(*clk_desc), 0, &t); | |
| if (ret) | |
| return ret; | |
| clk_desc = t->tx.buf; | |
| rlist = t->rx.buf; | |
| do { | |
| clk_desc->id = cpu_to_le32(clk_id); | |
| /* Set the number of rates to be skipped/already read */ | |
| clk_desc->rate_index = cpu_to_le32(tot_rate_cnt); | |
| ret = ph->xops->do_xfer(ph, t); | |
| if (ret) | |
| goto err; | |
| rates_flag = le32_to_cpu(rlist->num_rates_flags); | |
| num_remaining = NUM_REMAINING(rates_flag); | |
| rate_discrete = RATE_DISCRETE(rates_flag); | |
| num_returned = NUM_RETURNED(rates_flag); | |
| if (tot_rate_cnt + num_returned > SCMI_MAX_NUM_RATES) { | |
| dev_err(ph->dev, "No. of rates > MAX_NUM_RATES"); | |
| break; | |
| } | |
| if (!rate_discrete) { | |
| clk->range.min_rate = RATE_TO_U64(rlist->rate[0]); | |
| clk->range.max_rate = RATE_TO_U64(rlist->rate[1]); | |
| clk->range.step_size = RATE_TO_U64(rlist->rate[2]); | |
| dev_dbg(ph->dev, "Min %llu Max %llu Step %llu Hz\n", | |
| clk->range.min_rate, clk->range.max_rate, | |
| clk->range.step_size); | |
| break; | |
| } | |
| rate = &clk->list.rates[tot_rate_cnt]; | |
| for (cnt = 0; cnt < num_returned; cnt++, rate++) { | |
| *rate = RATE_TO_U64(rlist->rate[cnt]); | |
| dev_dbg(ph->dev, "Rate %llu Hz\n", *rate); | |
| } | |
| tot_rate_cnt += num_returned; | |
| ph->xops->reset_rx_to_maxsz(ph, t); | |
| /* | |
| * check for both returned and remaining to avoid infinite | |
| * loop due to buggy firmware | |
| */ | |
| } while (num_returned && num_remaining); | |
| if (rate_discrete && rate) { | |
| clk->list.num_rates = tot_rate_cnt; | |
| sort(rate, tot_rate_cnt, sizeof(*rate), rate_cmp_func, NULL); | |
| } | |
| clk->rate_discrete = rate_discrete; | |
| err: | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int | |
| scmi_clock_rate_get(const struct scmi_protocol_handle *ph, | |
| u32 clk_id, u64 *value) | |
| { | |
| int ret; | |
| struct scmi_xfer *t; | |
| ret = ph->xops->xfer_get_init(ph, CLOCK_RATE_GET, | |
| sizeof(__le32), sizeof(u64), &t); | |
| if (ret) | |
| return ret; | |
| put_unaligned_le32(clk_id, t->tx.buf); | |
| ret = ph->xops->do_xfer(ph, t); | |
| if (!ret) | |
| *value = get_unaligned_le64(t->rx.buf); | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int scmi_clock_rate_set(const struct scmi_protocol_handle *ph, | |
| u32 clk_id, u64 rate) | |
| { | |
| int ret; | |
| u32 flags = 0; | |
| struct scmi_xfer *t; | |
| struct scmi_clock_set_rate *cfg; | |
| struct clock_info *ci = ph->get_priv(ph); | |
| ret = ph->xops->xfer_get_init(ph, CLOCK_RATE_SET, sizeof(*cfg), 0, &t); | |
| if (ret) | |
| return ret; | |
| if (ci->max_async_req && | |
| atomic_inc_return(&ci->cur_async_req) < ci->max_async_req) | |
| flags |= CLOCK_SET_ASYNC; | |
| cfg = t->tx.buf; | |
| cfg->flags = cpu_to_le32(flags); | |
| cfg->id = cpu_to_le32(clk_id); | |
| cfg->value_low = cpu_to_le32(rate & 0xffffffff); | |
| cfg->value_high = cpu_to_le32(rate >> 32); | |
| if (flags & CLOCK_SET_ASYNC) | |
| ret = ph->xops->do_xfer_with_response(ph, t); | |
| else | |
| ret = ph->xops->do_xfer(ph, t); | |
| if (ci->max_async_req) | |
| atomic_dec(&ci->cur_async_req); | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int | |
| scmi_clock_config_set(const struct scmi_protocol_handle *ph, u32 clk_id, | |
| u32 config) | |
| { | |
| int ret; | |
| struct scmi_xfer *t; | |
| struct scmi_clock_set_config *cfg; | |
| ret = ph->xops->xfer_get_init(ph, CLOCK_CONFIG_SET, | |
| sizeof(*cfg), 0, &t); | |
| if (ret) | |
| return ret; | |
| cfg = t->tx.buf; | |
| cfg->id = cpu_to_le32(clk_id); | |
| cfg->attributes = cpu_to_le32(config); | |
| ret = ph->xops->do_xfer(ph, t); | |
| ph->xops->xfer_put(ph, t); | |
| return ret; | |
| } | |
| static int scmi_clock_enable(const struct scmi_protocol_handle *ph, u32 clk_id) | |
| { | |
| return scmi_clock_config_set(ph, clk_id, CLOCK_ENABLE); | |
| } | |
| static int scmi_clock_disable(const struct scmi_protocol_handle *ph, u32 clk_id) | |
| { | |
| return scmi_clock_config_set(ph, clk_id, 0); | |
| } | |
| static int scmi_clock_count_get(const struct scmi_protocol_handle *ph) | |
| { | |
| struct clock_info *ci = ph->get_priv(ph); | |
| return ci->num_clocks; | |
| } | |
| static const struct scmi_clock_info * | |
| scmi_clock_info_get(const struct scmi_protocol_handle *ph, u32 clk_id) | |
| { | |
| struct clock_info *ci = ph->get_priv(ph); | |
| struct scmi_clock_info *clk = ci->clk + clk_id; | |
| if (!clk->name[0]) | |
| return NULL; | |
| return clk; | |
| } | |
| static const struct scmi_clk_proto_ops clk_proto_ops = { | |
| .count_get = scmi_clock_count_get, | |
| .info_get = scmi_clock_info_get, | |
| .rate_get = scmi_clock_rate_get, | |
| .rate_set = scmi_clock_rate_set, | |
| .enable = scmi_clock_enable, | |
| .disable = scmi_clock_disable, | |
| }; | |
| static int scmi_clock_protocol_init(const struct scmi_protocol_handle *ph) | |
| { | |
| u32 version; | |
| int clkid, ret; | |
| struct clock_info *cinfo; | |
| ph->xops->version_get(ph, &version); | |
| dev_dbg(ph->dev, "Clock Version %d.%d\n", | |
| PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); | |
| cinfo = devm_kzalloc(ph->dev, sizeof(*cinfo), GFP_KERNEL); | |
| if (!cinfo) | |
| return -ENOMEM; | |
| scmi_clock_protocol_attributes_get(ph, cinfo); | |
| cinfo->clk = devm_kcalloc(ph->dev, cinfo->num_clocks, | |
| sizeof(*cinfo->clk), GFP_KERNEL); | |
| if (!cinfo->clk) | |
| return -ENOMEM; | |
| for (clkid = 0; clkid < cinfo->num_clocks; clkid++) { | |
| struct scmi_clock_info *clk = cinfo->clk + clkid; | |
| ret = scmi_clock_attributes_get(ph, clkid, clk); | |
| if (!ret) | |
| scmi_clock_describe_rates_get(ph, clkid, clk); | |
| } | |
| cinfo->version = version; | |
| return ph->set_priv(ph, cinfo); | |
| } | |
| static const struct scmi_protocol scmi_clock = { | |
| .id = SCMI_PROTOCOL_CLOCK, | |
| .owner = THIS_MODULE, | |
| .instance_init = &scmi_clock_protocol_init, | |
| .ops = &clk_proto_ops, | |
| }; | |
| DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(clock, scmi_clock) |