blob: c1784d8facdf03a8f43370b8f7fb9e5ede6af7e3 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2009 Simtec Electronics
// http://armlinux.simtec.co.uk/
// Ben Dooks <ben@simtec.co.uk>
//
// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
#include <linux/clk.h>
#include "map.h"
#include "regs-clock.h"
#include <linux/soc/samsung/s3c-cpufreq-core.h>
#include "regs-mem-s3c24xx.h"
/**
* s3c2410_cpufreq_setrefresh - set SDRAM refresh value
* @cfg: The frequency configuration
*
* Set the SDRAM refresh value appropriately for the configured
* frequency.
*/
void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
{
struct s3c_cpufreq_board *board = cfg->board;
unsigned long refresh;
unsigned long refval;
/* Reduce both the refresh time (in ns) and the frequency (in MHz)
* down to ensure that we do not overflow 32 bit numbers.
*
* This should work for HCLK up to 133MHz and refresh period up
* to 30usec.
*/
refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
refresh = (1 << 11) + 1 - refresh;
s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
refval = __raw_readl(S3C2410_REFRESH);
refval &= ~((1 << 12) - 1);
refval |= refresh;
__raw_writel(refval, S3C2410_REFRESH);
}
/**
* s3c2410_set_fvco - set the PLL value
* @cfg: The frequency configuration
*/
void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
{
if (!IS_ERR(cfg->mpll))
clk_set_rate(cfg->mpll, cfg->pll.frequency);
}
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
u32 s3c2440_read_camdivn(void)
{
return __raw_readl(S3C2440_CAMDIVN);
}
void s3c2440_write_camdivn(u32 camdiv)
{
__raw_writel(camdiv, S3C2440_CAMDIVN);
}
#endif
u32 s3c24xx_read_clkdivn(void)
{
return __raw_readl(S3C2410_CLKDIVN);
}
void s3c24xx_write_clkdivn(u32 clkdiv)
{
__raw_writel(clkdiv, S3C2410_CLKDIVN);
}
u32 s3c24xx_read_mpllcon(void)
{
return __raw_readl(S3C2410_MPLLCON);
}
void s3c24xx_write_locktime(u32 locktime)
{
return __raw_writel(locktime, S3C2410_LOCKTIME);
}