| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc. | |
| * All Rights Reserved. | |
| */ | |
| #include "xfs.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_bit.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_inode.h" | |
| #include "xfs_btree.h" | |
| #include "xfs_ialloc.h" | |
| #include "xfs_ialloc_btree.h" | |
| #include "xfs_alloc.h" | |
| #include "xfs_errortag.h" | |
| #include "xfs_error.h" | |
| #include "xfs_bmap.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_buf_item.h" | |
| #include "xfs_icreate_item.h" | |
| #include "xfs_icache.h" | |
| #include "xfs_trace.h" | |
| #include "xfs_log.h" | |
| #include "xfs_rmap.h" | |
| #include "xfs_ag.h" | |
| /* | |
| * Lookup a record by ino in the btree given by cur. | |
| */ | |
| int /* error */ | |
| xfs_inobt_lookup( | |
| struct xfs_btree_cur *cur, /* btree cursor */ | |
| xfs_agino_t ino, /* starting inode of chunk */ | |
| xfs_lookup_t dir, /* <=, >=, == */ | |
| int *stat) /* success/failure */ | |
| { | |
| cur->bc_rec.i.ir_startino = ino; | |
| cur->bc_rec.i.ir_holemask = 0; | |
| cur->bc_rec.i.ir_count = 0; | |
| cur->bc_rec.i.ir_freecount = 0; | |
| cur->bc_rec.i.ir_free = 0; | |
| return xfs_btree_lookup(cur, dir, stat); | |
| } | |
| /* | |
| * Update the record referred to by cur to the value given. | |
| * This either works (return 0) or gets an EFSCORRUPTED error. | |
| */ | |
| STATIC int /* error */ | |
| xfs_inobt_update( | |
| struct xfs_btree_cur *cur, /* btree cursor */ | |
| xfs_inobt_rec_incore_t *irec) /* btree record */ | |
| { | |
| union xfs_btree_rec rec; | |
| rec.inobt.ir_startino = cpu_to_be32(irec->ir_startino); | |
| if (xfs_has_sparseinodes(cur->bc_mp)) { | |
| rec.inobt.ir_u.sp.ir_holemask = cpu_to_be16(irec->ir_holemask); | |
| rec.inobt.ir_u.sp.ir_count = irec->ir_count; | |
| rec.inobt.ir_u.sp.ir_freecount = irec->ir_freecount; | |
| } else { | |
| /* ir_holemask/ir_count not supported on-disk */ | |
| rec.inobt.ir_u.f.ir_freecount = cpu_to_be32(irec->ir_freecount); | |
| } | |
| rec.inobt.ir_free = cpu_to_be64(irec->ir_free); | |
| return xfs_btree_update(cur, &rec); | |
| } | |
| /* Convert on-disk btree record to incore inobt record. */ | |
| void | |
| xfs_inobt_btrec_to_irec( | |
| struct xfs_mount *mp, | |
| const union xfs_btree_rec *rec, | |
| struct xfs_inobt_rec_incore *irec) | |
| { | |
| irec->ir_startino = be32_to_cpu(rec->inobt.ir_startino); | |
| if (xfs_has_sparseinodes(mp)) { | |
| irec->ir_holemask = be16_to_cpu(rec->inobt.ir_u.sp.ir_holemask); | |
| irec->ir_count = rec->inobt.ir_u.sp.ir_count; | |
| irec->ir_freecount = rec->inobt.ir_u.sp.ir_freecount; | |
| } else { | |
| /* | |
| * ir_holemask/ir_count not supported on-disk. Fill in hardcoded | |
| * values for full inode chunks. | |
| */ | |
| irec->ir_holemask = XFS_INOBT_HOLEMASK_FULL; | |
| irec->ir_count = XFS_INODES_PER_CHUNK; | |
| irec->ir_freecount = | |
| be32_to_cpu(rec->inobt.ir_u.f.ir_freecount); | |
| } | |
| irec->ir_free = be64_to_cpu(rec->inobt.ir_free); | |
| } | |
| /* | |
| * Get the data from the pointed-to record. | |
| */ | |
| int | |
| xfs_inobt_get_rec( | |
| struct xfs_btree_cur *cur, | |
| struct xfs_inobt_rec_incore *irec, | |
| int *stat) | |
| { | |
| struct xfs_mount *mp = cur->bc_mp; | |
| xfs_agnumber_t agno = cur->bc_ag.pag->pag_agno; | |
| union xfs_btree_rec *rec; | |
| int error; | |
| uint64_t realfree; | |
| error = xfs_btree_get_rec(cur, &rec, stat); | |
| if (error || *stat == 0) | |
| return error; | |
| xfs_inobt_btrec_to_irec(mp, rec, irec); | |
| if (!xfs_verify_agino(mp, agno, irec->ir_startino)) | |
| goto out_bad_rec; | |
| if (irec->ir_count < XFS_INODES_PER_HOLEMASK_BIT || | |
| irec->ir_count > XFS_INODES_PER_CHUNK) | |
| goto out_bad_rec; | |
| if (irec->ir_freecount > XFS_INODES_PER_CHUNK) | |
| goto out_bad_rec; | |
| /* if there are no holes, return the first available offset */ | |
| if (!xfs_inobt_issparse(irec->ir_holemask)) | |
| realfree = irec->ir_free; | |
| else | |
| realfree = irec->ir_free & xfs_inobt_irec_to_allocmask(irec); | |
| if (hweight64(realfree) != irec->ir_freecount) | |
| goto out_bad_rec; | |
| return 0; | |
| out_bad_rec: | |
| xfs_warn(mp, | |
| "%s Inode BTree record corruption in AG %d detected!", | |
| cur->bc_btnum == XFS_BTNUM_INO ? "Used" : "Free", agno); | |
| xfs_warn(mp, | |
| "start inode 0x%x, count 0x%x, free 0x%x freemask 0x%llx, holemask 0x%x", | |
| irec->ir_startino, irec->ir_count, irec->ir_freecount, | |
| irec->ir_free, irec->ir_holemask); | |
| return -EFSCORRUPTED; | |
| } | |
| /* | |
| * Insert a single inobt record. Cursor must already point to desired location. | |
| */ | |
| int | |
| xfs_inobt_insert_rec( | |
| struct xfs_btree_cur *cur, | |
| uint16_t holemask, | |
| uint8_t count, | |
| int32_t freecount, | |
| xfs_inofree_t free, | |
| int *stat) | |
| { | |
| cur->bc_rec.i.ir_holemask = holemask; | |
| cur->bc_rec.i.ir_count = count; | |
| cur->bc_rec.i.ir_freecount = freecount; | |
| cur->bc_rec.i.ir_free = free; | |
| return xfs_btree_insert(cur, stat); | |
| } | |
| /* | |
| * Insert records describing a newly allocated inode chunk into the inobt. | |
| */ | |
| STATIC int | |
| xfs_inobt_insert( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| xfs_agino_t newino, | |
| xfs_agino_t newlen, | |
| xfs_btnum_t btnum) | |
| { | |
| struct xfs_btree_cur *cur; | |
| xfs_agino_t thisino; | |
| int i; | |
| int error; | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, btnum); | |
| for (thisino = newino; | |
| thisino < newino + newlen; | |
| thisino += XFS_INODES_PER_CHUNK) { | |
| error = xfs_inobt_lookup(cur, thisino, XFS_LOOKUP_EQ, &i); | |
| if (error) { | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| ASSERT(i == 0); | |
| error = xfs_inobt_insert_rec(cur, XFS_INOBT_HOLEMASK_FULL, | |
| XFS_INODES_PER_CHUNK, | |
| XFS_INODES_PER_CHUNK, | |
| XFS_INOBT_ALL_FREE, &i); | |
| if (error) { | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| ASSERT(i == 1); | |
| } | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| return 0; | |
| } | |
| /* | |
| * Verify that the number of free inodes in the AGI is correct. | |
| */ | |
| #ifdef DEBUG | |
| static int | |
| xfs_check_agi_freecount( | |
| struct xfs_btree_cur *cur) | |
| { | |
| if (cur->bc_nlevels == 1) { | |
| xfs_inobt_rec_incore_t rec; | |
| int freecount = 0; | |
| int error; | |
| int i; | |
| error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &i); | |
| if (error) | |
| return error; | |
| do { | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) | |
| return error; | |
| if (i) { | |
| freecount += rec.ir_freecount; | |
| error = xfs_btree_increment(cur, 0, &i); | |
| if (error) | |
| return error; | |
| } | |
| } while (i == 1); | |
| if (!xfs_is_shutdown(cur->bc_mp)) | |
| ASSERT(freecount == cur->bc_ag.pag->pagi_freecount); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define xfs_check_agi_freecount(cur) 0 | |
| #endif | |
| /* | |
| * Initialise a new set of inodes. When called without a transaction context | |
| * (e.g. from recovery) we initiate a delayed write of the inode buffers rather | |
| * than logging them (which in a transaction context puts them into the AIL | |
| * for writeback rather than the xfsbufd queue). | |
| */ | |
| int | |
| xfs_ialloc_inode_init( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct list_head *buffer_list, | |
| int icount, | |
| xfs_agnumber_t agno, | |
| xfs_agblock_t agbno, | |
| xfs_agblock_t length, | |
| unsigned int gen) | |
| { | |
| struct xfs_buf *fbuf; | |
| struct xfs_dinode *free; | |
| int nbufs; | |
| int version; | |
| int i, j; | |
| xfs_daddr_t d; | |
| xfs_ino_t ino = 0; | |
| int error; | |
| /* | |
| * Loop over the new block(s), filling in the inodes. For small block | |
| * sizes, manipulate the inodes in buffers which are multiples of the | |
| * blocks size. | |
| */ | |
| nbufs = length / M_IGEO(mp)->blocks_per_cluster; | |
| /* | |
| * Figure out what version number to use in the inodes we create. If | |
| * the superblock version has caught up to the one that supports the new | |
| * inode format, then use the new inode version. Otherwise use the old | |
| * version so that old kernels will continue to be able to use the file | |
| * system. | |
| * | |
| * For v3 inodes, we also need to write the inode number into the inode, | |
| * so calculate the first inode number of the chunk here as | |
| * XFS_AGB_TO_AGINO() only works within a filesystem block, not | |
| * across multiple filesystem blocks (such as a cluster) and so cannot | |
| * be used in the cluster buffer loop below. | |
| * | |
| * Further, because we are writing the inode directly into the buffer | |
| * and calculating a CRC on the entire inode, we have ot log the entire | |
| * inode so that the entire range the CRC covers is present in the log. | |
| * That means for v3 inode we log the entire buffer rather than just the | |
| * inode cores. | |
| */ | |
| if (xfs_has_v3inodes(mp)) { | |
| version = 3; | |
| ino = XFS_AGINO_TO_INO(mp, agno, XFS_AGB_TO_AGINO(mp, agbno)); | |
| /* | |
| * log the initialisation that is about to take place as an | |
| * logical operation. This means the transaction does not | |
| * need to log the physical changes to the inode buffers as log | |
| * recovery will know what initialisation is actually needed. | |
| * Hence we only need to log the buffers as "ordered" buffers so | |
| * they track in the AIL as if they were physically logged. | |
| */ | |
| if (tp) | |
| xfs_icreate_log(tp, agno, agbno, icount, | |
| mp->m_sb.sb_inodesize, length, gen); | |
| } else | |
| version = 2; | |
| for (j = 0; j < nbufs; j++) { | |
| /* | |
| * Get the block. | |
| */ | |
| d = XFS_AGB_TO_DADDR(mp, agno, agbno + | |
| (j * M_IGEO(mp)->blocks_per_cluster)); | |
| error = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, | |
| mp->m_bsize * M_IGEO(mp)->blocks_per_cluster, | |
| XBF_UNMAPPED, &fbuf); | |
| if (error) | |
| return error; | |
| /* Initialize the inode buffers and log them appropriately. */ | |
| fbuf->b_ops = &xfs_inode_buf_ops; | |
| xfs_buf_zero(fbuf, 0, BBTOB(fbuf->b_length)); | |
| for (i = 0; i < M_IGEO(mp)->inodes_per_cluster; i++) { | |
| int ioffset = i << mp->m_sb.sb_inodelog; | |
| free = xfs_make_iptr(mp, fbuf, i); | |
| free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); | |
| free->di_version = version; | |
| free->di_gen = cpu_to_be32(gen); | |
| free->di_next_unlinked = cpu_to_be32(NULLAGINO); | |
| if (version == 3) { | |
| free->di_ino = cpu_to_be64(ino); | |
| ino++; | |
| uuid_copy(&free->di_uuid, | |
| &mp->m_sb.sb_meta_uuid); | |
| xfs_dinode_calc_crc(mp, free); | |
| } else if (tp) { | |
| /* just log the inode core */ | |
| xfs_trans_log_buf(tp, fbuf, ioffset, | |
| ioffset + XFS_DINODE_SIZE(mp) - 1); | |
| } | |
| } | |
| if (tp) { | |
| /* | |
| * Mark the buffer as an inode allocation buffer so it | |
| * sticks in AIL at the point of this allocation | |
| * transaction. This ensures the they are on disk before | |
| * the tail of the log can be moved past this | |
| * transaction (i.e. by preventing relogging from moving | |
| * it forward in the log). | |
| */ | |
| xfs_trans_inode_alloc_buf(tp, fbuf); | |
| if (version == 3) { | |
| /* | |
| * Mark the buffer as ordered so that they are | |
| * not physically logged in the transaction but | |
| * still tracked in the AIL as part of the | |
| * transaction and pin the log appropriately. | |
| */ | |
| xfs_trans_ordered_buf(tp, fbuf); | |
| } | |
| } else { | |
| fbuf->b_flags |= XBF_DONE; | |
| xfs_buf_delwri_queue(fbuf, buffer_list); | |
| xfs_buf_relse(fbuf); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Align startino and allocmask for a recently allocated sparse chunk such that | |
| * they are fit for insertion (or merge) into the on-disk inode btrees. | |
| * | |
| * Background: | |
| * | |
| * When enabled, sparse inode support increases the inode alignment from cluster | |
| * size to inode chunk size. This means that the minimum range between two | |
| * non-adjacent inode records in the inobt is large enough for a full inode | |
| * record. This allows for cluster sized, cluster aligned block allocation | |
| * without need to worry about whether the resulting inode record overlaps with | |
| * another record in the tree. Without this basic rule, we would have to deal | |
| * with the consequences of overlap by potentially undoing recent allocations in | |
| * the inode allocation codepath. | |
| * | |
| * Because of this alignment rule (which is enforced on mount), there are two | |
| * inobt possibilities for newly allocated sparse chunks. One is that the | |
| * aligned inode record for the chunk covers a range of inodes not already | |
| * covered in the inobt (i.e., it is safe to insert a new sparse record). The | |
| * other is that a record already exists at the aligned startino that considers | |
| * the newly allocated range as sparse. In the latter case, record content is | |
| * merged in hope that sparse inode chunks fill to full chunks over time. | |
| */ | |
| STATIC void | |
| xfs_align_sparse_ino( | |
| struct xfs_mount *mp, | |
| xfs_agino_t *startino, | |
| uint16_t *allocmask) | |
| { | |
| xfs_agblock_t agbno; | |
| xfs_agblock_t mod; | |
| int offset; | |
| agbno = XFS_AGINO_TO_AGBNO(mp, *startino); | |
| mod = agbno % mp->m_sb.sb_inoalignmt; | |
| if (!mod) | |
| return; | |
| /* calculate the inode offset and align startino */ | |
| offset = XFS_AGB_TO_AGINO(mp, mod); | |
| *startino -= offset; | |
| /* | |
| * Since startino has been aligned down, left shift allocmask such that | |
| * it continues to represent the same physical inodes relative to the | |
| * new startino. | |
| */ | |
| *allocmask <<= offset / XFS_INODES_PER_HOLEMASK_BIT; | |
| } | |
| /* | |
| * Determine whether the source inode record can merge into the target. Both | |
| * records must be sparse, the inode ranges must match and there must be no | |
| * allocation overlap between the records. | |
| */ | |
| STATIC bool | |
| __xfs_inobt_can_merge( | |
| struct xfs_inobt_rec_incore *trec, /* tgt record */ | |
| struct xfs_inobt_rec_incore *srec) /* src record */ | |
| { | |
| uint64_t talloc; | |
| uint64_t salloc; | |
| /* records must cover the same inode range */ | |
| if (trec->ir_startino != srec->ir_startino) | |
| return false; | |
| /* both records must be sparse */ | |
| if (!xfs_inobt_issparse(trec->ir_holemask) || | |
| !xfs_inobt_issparse(srec->ir_holemask)) | |
| return false; | |
| /* both records must track some inodes */ | |
| if (!trec->ir_count || !srec->ir_count) | |
| return false; | |
| /* can't exceed capacity of a full record */ | |
| if (trec->ir_count + srec->ir_count > XFS_INODES_PER_CHUNK) | |
| return false; | |
| /* verify there is no allocation overlap */ | |
| talloc = xfs_inobt_irec_to_allocmask(trec); | |
| salloc = xfs_inobt_irec_to_allocmask(srec); | |
| if (talloc & salloc) | |
| return false; | |
| return true; | |
| } | |
| /* | |
| * Merge the source inode record into the target. The caller must call | |
| * __xfs_inobt_can_merge() to ensure the merge is valid. | |
| */ | |
| STATIC void | |
| __xfs_inobt_rec_merge( | |
| struct xfs_inobt_rec_incore *trec, /* target */ | |
| struct xfs_inobt_rec_incore *srec) /* src */ | |
| { | |
| ASSERT(trec->ir_startino == srec->ir_startino); | |
| /* combine the counts */ | |
| trec->ir_count += srec->ir_count; | |
| trec->ir_freecount += srec->ir_freecount; | |
| /* | |
| * Merge the holemask and free mask. For both fields, 0 bits refer to | |
| * allocated inodes. We combine the allocated ranges with bitwise AND. | |
| */ | |
| trec->ir_holemask &= srec->ir_holemask; | |
| trec->ir_free &= srec->ir_free; | |
| } | |
| /* | |
| * Insert a new sparse inode chunk into the associated inode btree. The inode | |
| * record for the sparse chunk is pre-aligned to a startino that should match | |
| * any pre-existing sparse inode record in the tree. This allows sparse chunks | |
| * to fill over time. | |
| * | |
| * This function supports two modes of handling preexisting records depending on | |
| * the merge flag. If merge is true, the provided record is merged with the | |
| * existing record and updated in place. The merged record is returned in nrec. | |
| * If merge is false, an existing record is replaced with the provided record. | |
| * If no preexisting record exists, the provided record is always inserted. | |
| * | |
| * It is considered corruption if a merge is requested and not possible. Given | |
| * the sparse inode alignment constraints, this should never happen. | |
| */ | |
| STATIC int | |
| xfs_inobt_insert_sprec( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| int btnum, | |
| struct xfs_inobt_rec_incore *nrec, /* in/out: new/merged rec. */ | |
| bool merge) /* merge or replace */ | |
| { | |
| struct xfs_btree_cur *cur; | |
| int error; | |
| int i; | |
| struct xfs_inobt_rec_incore rec; | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, btnum); | |
| /* the new record is pre-aligned so we know where to look */ | |
| error = xfs_inobt_lookup(cur, nrec->ir_startino, XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| goto error; | |
| /* if nothing there, insert a new record and return */ | |
| if (i == 0) { | |
| error = xfs_inobt_insert_rec(cur, nrec->ir_holemask, | |
| nrec->ir_count, nrec->ir_freecount, | |
| nrec->ir_free, &i); | |
| if (error) | |
| goto error; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| goto out; | |
| } | |
| /* | |
| * A record exists at this startino. Merge or replace the record | |
| * depending on what we've been asked to do. | |
| */ | |
| if (merge) { | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) | |
| goto error; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| if (XFS_IS_CORRUPT(mp, rec.ir_startino != nrec->ir_startino)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| /* | |
| * This should never fail. If we have coexisting records that | |
| * cannot merge, something is seriously wrong. | |
| */ | |
| if (XFS_IS_CORRUPT(mp, !__xfs_inobt_can_merge(nrec, &rec))) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| trace_xfs_irec_merge_pre(mp, pag->pag_agno, rec.ir_startino, | |
| rec.ir_holemask, nrec->ir_startino, | |
| nrec->ir_holemask); | |
| /* merge to nrec to output the updated record */ | |
| __xfs_inobt_rec_merge(nrec, &rec); | |
| trace_xfs_irec_merge_post(mp, pag->pag_agno, nrec->ir_startino, | |
| nrec->ir_holemask); | |
| error = xfs_inobt_rec_check_count(mp, nrec); | |
| if (error) | |
| goto error; | |
| } | |
| error = xfs_inobt_update(cur, nrec); | |
| if (error) | |
| goto error; | |
| out: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| return 0; | |
| error: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| /* | |
| * Allocate new inodes in the allocation group specified by agbp. Returns 0 if | |
| * inodes were allocated in this AG; -EAGAIN if there was no space in this AG so | |
| * the caller knows it can try another AG, a hard -ENOSPC when over the maximum | |
| * inode count threshold, or the usual negative error code for other errors. | |
| */ | |
| STATIC int | |
| xfs_ialloc_ag_alloc( | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag) | |
| { | |
| struct xfs_agi *agi; | |
| struct xfs_alloc_arg args; | |
| int error; | |
| xfs_agino_t newino; /* new first inode's number */ | |
| xfs_agino_t newlen; /* new number of inodes */ | |
| int isaligned = 0; /* inode allocation at stripe */ | |
| /* unit boundary */ | |
| /* init. to full chunk */ | |
| struct xfs_inobt_rec_incore rec; | |
| struct xfs_ino_geometry *igeo = M_IGEO(tp->t_mountp); | |
| uint16_t allocmask = (uint16_t) -1; | |
| int do_sparse = 0; | |
| memset(&args, 0, sizeof(args)); | |
| args.tp = tp; | |
| args.mp = tp->t_mountp; | |
| args.fsbno = NULLFSBLOCK; | |
| args.oinfo = XFS_RMAP_OINFO_INODES; | |
| #ifdef DEBUG | |
| /* randomly do sparse inode allocations */ | |
| if (xfs_has_sparseinodes(tp->t_mountp) && | |
| igeo->ialloc_min_blks < igeo->ialloc_blks) | |
| do_sparse = prandom_u32() & 1; | |
| #endif | |
| /* | |
| * Locking will ensure that we don't have two callers in here | |
| * at one time. | |
| */ | |
| newlen = igeo->ialloc_inos; | |
| if (igeo->maxicount && | |
| percpu_counter_read_positive(&args.mp->m_icount) + newlen > | |
| igeo->maxicount) | |
| return -ENOSPC; | |
| args.minlen = args.maxlen = igeo->ialloc_blks; | |
| /* | |
| * First try to allocate inodes contiguous with the last-allocated | |
| * chunk of inodes. If the filesystem is striped, this will fill | |
| * an entire stripe unit with inodes. | |
| */ | |
| agi = agbp->b_addr; | |
| newino = be32_to_cpu(agi->agi_newino); | |
| args.agbno = XFS_AGINO_TO_AGBNO(args.mp, newino) + | |
| igeo->ialloc_blks; | |
| if (do_sparse) | |
| goto sparse_alloc; | |
| if (likely(newino != NULLAGINO && | |
| (args.agbno < be32_to_cpu(agi->agi_length)))) { | |
| args.fsbno = XFS_AGB_TO_FSB(args.mp, pag->pag_agno, args.agbno); | |
| args.type = XFS_ALLOCTYPE_THIS_BNO; | |
| args.prod = 1; | |
| /* | |
| * We need to take into account alignment here to ensure that | |
| * we don't modify the free list if we fail to have an exact | |
| * block. If we don't have an exact match, and every oher | |
| * attempt allocation attempt fails, we'll end up cancelling | |
| * a dirty transaction and shutting down. | |
| * | |
| * For an exact allocation, alignment must be 1, | |
| * however we need to take cluster alignment into account when | |
| * fixing up the freelist. Use the minalignslop field to | |
| * indicate that extra blocks might be required for alignment, | |
| * but not to use them in the actual exact allocation. | |
| */ | |
| args.alignment = 1; | |
| args.minalignslop = igeo->cluster_align - 1; | |
| /* Allow space for the inode btree to split. */ | |
| args.minleft = igeo->inobt_maxlevels; | |
| if ((error = xfs_alloc_vextent(&args))) | |
| return error; | |
| /* | |
| * This request might have dirtied the transaction if the AG can | |
| * satisfy the request, but the exact block was not available. | |
| * If the allocation did fail, subsequent requests will relax | |
| * the exact agbno requirement and increase the alignment | |
| * instead. It is critical that the total size of the request | |
| * (len + alignment + slop) does not increase from this point | |
| * on, so reset minalignslop to ensure it is not included in | |
| * subsequent requests. | |
| */ | |
| args.minalignslop = 0; | |
| } | |
| if (unlikely(args.fsbno == NULLFSBLOCK)) { | |
| /* | |
| * Set the alignment for the allocation. | |
| * If stripe alignment is turned on then align at stripe unit | |
| * boundary. | |
| * If the cluster size is smaller than a filesystem block | |
| * then we're doing I/O for inodes in filesystem block size | |
| * pieces, so don't need alignment anyway. | |
| */ | |
| isaligned = 0; | |
| if (igeo->ialloc_align) { | |
| ASSERT(!xfs_has_noalign(args.mp)); | |
| args.alignment = args.mp->m_dalign; | |
| isaligned = 1; | |
| } else | |
| args.alignment = igeo->cluster_align; | |
| /* | |
| * Need to figure out where to allocate the inode blocks. | |
| * Ideally they should be spaced out through the a.g. | |
| * For now, just allocate blocks up front. | |
| */ | |
| args.agbno = be32_to_cpu(agi->agi_root); | |
| args.fsbno = XFS_AGB_TO_FSB(args.mp, pag->pag_agno, args.agbno); | |
| /* | |
| * Allocate a fixed-size extent of inodes. | |
| */ | |
| args.type = XFS_ALLOCTYPE_NEAR_BNO; | |
| args.prod = 1; | |
| /* | |
| * Allow space for the inode btree to split. | |
| */ | |
| args.minleft = igeo->inobt_maxlevels; | |
| if ((error = xfs_alloc_vextent(&args))) | |
| return error; | |
| } | |
| /* | |
| * If stripe alignment is turned on, then try again with cluster | |
| * alignment. | |
| */ | |
| if (isaligned && args.fsbno == NULLFSBLOCK) { | |
| args.type = XFS_ALLOCTYPE_NEAR_BNO; | |
| args.agbno = be32_to_cpu(agi->agi_root); | |
| args.fsbno = XFS_AGB_TO_FSB(args.mp, pag->pag_agno, args.agbno); | |
| args.alignment = igeo->cluster_align; | |
| if ((error = xfs_alloc_vextent(&args))) | |
| return error; | |
| } | |
| /* | |
| * Finally, try a sparse allocation if the filesystem supports it and | |
| * the sparse allocation length is smaller than a full chunk. | |
| */ | |
| if (xfs_has_sparseinodes(args.mp) && | |
| igeo->ialloc_min_blks < igeo->ialloc_blks && | |
| args.fsbno == NULLFSBLOCK) { | |
| sparse_alloc: | |
| args.type = XFS_ALLOCTYPE_NEAR_BNO; | |
| args.agbno = be32_to_cpu(agi->agi_root); | |
| args.fsbno = XFS_AGB_TO_FSB(args.mp, pag->pag_agno, args.agbno); | |
| args.alignment = args.mp->m_sb.sb_spino_align; | |
| args.prod = 1; | |
| args.minlen = igeo->ialloc_min_blks; | |
| args.maxlen = args.minlen; | |
| /* | |
| * The inode record will be aligned to full chunk size. We must | |
| * prevent sparse allocation from AG boundaries that result in | |
| * invalid inode records, such as records that start at agbno 0 | |
| * or extend beyond the AG. | |
| * | |
| * Set min agbno to the first aligned, non-zero agbno and max to | |
| * the last aligned agbno that is at least one full chunk from | |
| * the end of the AG. | |
| */ | |
| args.min_agbno = args.mp->m_sb.sb_inoalignmt; | |
| args.max_agbno = round_down(args.mp->m_sb.sb_agblocks, | |
| args.mp->m_sb.sb_inoalignmt) - | |
| igeo->ialloc_blks; | |
| error = xfs_alloc_vextent(&args); | |
| if (error) | |
| return error; | |
| newlen = XFS_AGB_TO_AGINO(args.mp, args.len); | |
| ASSERT(newlen <= XFS_INODES_PER_CHUNK); | |
| allocmask = (1 << (newlen / XFS_INODES_PER_HOLEMASK_BIT)) - 1; | |
| } | |
| if (args.fsbno == NULLFSBLOCK) | |
| return -EAGAIN; | |
| ASSERT(args.len == args.minlen); | |
| /* | |
| * Stamp and write the inode buffers. | |
| * | |
| * Seed the new inode cluster with a random generation number. This | |
| * prevents short-term reuse of generation numbers if a chunk is | |
| * freed and then immediately reallocated. We use random numbers | |
| * rather than a linear progression to prevent the next generation | |
| * number from being easily guessable. | |
| */ | |
| error = xfs_ialloc_inode_init(args.mp, tp, NULL, newlen, pag->pag_agno, | |
| args.agbno, args.len, prandom_u32()); | |
| if (error) | |
| return error; | |
| /* | |
| * Convert the results. | |
| */ | |
| newino = XFS_AGB_TO_AGINO(args.mp, args.agbno); | |
| if (xfs_inobt_issparse(~allocmask)) { | |
| /* | |
| * We've allocated a sparse chunk. Align the startino and mask. | |
| */ | |
| xfs_align_sparse_ino(args.mp, &newino, &allocmask); | |
| rec.ir_startino = newino; | |
| rec.ir_holemask = ~allocmask; | |
| rec.ir_count = newlen; | |
| rec.ir_freecount = newlen; | |
| rec.ir_free = XFS_INOBT_ALL_FREE; | |
| /* | |
| * Insert the sparse record into the inobt and allow for a merge | |
| * if necessary. If a merge does occur, rec is updated to the | |
| * merged record. | |
| */ | |
| error = xfs_inobt_insert_sprec(args.mp, tp, agbp, pag, | |
| XFS_BTNUM_INO, &rec, true); | |
| if (error == -EFSCORRUPTED) { | |
| xfs_alert(args.mp, | |
| "invalid sparse inode record: ino 0x%llx holemask 0x%x count %u", | |
| XFS_AGINO_TO_INO(args.mp, pag->pag_agno, | |
| rec.ir_startino), | |
| rec.ir_holemask, rec.ir_count); | |
| xfs_force_shutdown(args.mp, SHUTDOWN_CORRUPT_INCORE); | |
| } | |
| if (error) | |
| return error; | |
| /* | |
| * We can't merge the part we've just allocated as for the inobt | |
| * due to finobt semantics. The original record may or may not | |
| * exist independent of whether physical inodes exist in this | |
| * sparse chunk. | |
| * | |
| * We must update the finobt record based on the inobt record. | |
| * rec contains the fully merged and up to date inobt record | |
| * from the previous call. Set merge false to replace any | |
| * existing record with this one. | |
| */ | |
| if (xfs_has_finobt(args.mp)) { | |
| error = xfs_inobt_insert_sprec(args.mp, tp, agbp, pag, | |
| XFS_BTNUM_FINO, &rec, false); | |
| if (error) | |
| return error; | |
| } | |
| } else { | |
| /* full chunk - insert new records to both btrees */ | |
| error = xfs_inobt_insert(args.mp, tp, agbp, pag, newino, newlen, | |
| XFS_BTNUM_INO); | |
| if (error) | |
| return error; | |
| if (xfs_has_finobt(args.mp)) { | |
| error = xfs_inobt_insert(args.mp, tp, agbp, pag, newino, | |
| newlen, XFS_BTNUM_FINO); | |
| if (error) | |
| return error; | |
| } | |
| } | |
| /* | |
| * Update AGI counts and newino. | |
| */ | |
| be32_add_cpu(&agi->agi_count, newlen); | |
| be32_add_cpu(&agi->agi_freecount, newlen); | |
| pag->pagi_freecount += newlen; | |
| pag->pagi_count += newlen; | |
| agi->agi_newino = cpu_to_be32(newino); | |
| /* | |
| * Log allocation group header fields | |
| */ | |
| xfs_ialloc_log_agi(tp, agbp, | |
| XFS_AGI_COUNT | XFS_AGI_FREECOUNT | XFS_AGI_NEWINO); | |
| /* | |
| * Modify/log superblock values for inode count and inode free count. | |
| */ | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_ICOUNT, (long)newlen); | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, (long)newlen); | |
| return 0; | |
| } | |
| /* | |
| * Try to retrieve the next record to the left/right from the current one. | |
| */ | |
| STATIC int | |
| xfs_ialloc_next_rec( | |
| struct xfs_btree_cur *cur, | |
| xfs_inobt_rec_incore_t *rec, | |
| int *done, | |
| int left) | |
| { | |
| int error; | |
| int i; | |
| if (left) | |
| error = xfs_btree_decrement(cur, 0, &i); | |
| else | |
| error = xfs_btree_increment(cur, 0, &i); | |
| if (error) | |
| return error; | |
| *done = !i; | |
| if (i) { | |
| error = xfs_inobt_get_rec(cur, rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| } | |
| return 0; | |
| } | |
| STATIC int | |
| xfs_ialloc_get_rec( | |
| struct xfs_btree_cur *cur, | |
| xfs_agino_t agino, | |
| xfs_inobt_rec_incore_t *rec, | |
| int *done) | |
| { | |
| int error; | |
| int i; | |
| error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| return error; | |
| *done = !i; | |
| if (i) { | |
| error = xfs_inobt_get_rec(cur, rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Return the offset of the first free inode in the record. If the inode chunk | |
| * is sparsely allocated, we convert the record holemask to inode granularity | |
| * and mask off the unallocated regions from the inode free mask. | |
| */ | |
| STATIC int | |
| xfs_inobt_first_free_inode( | |
| struct xfs_inobt_rec_incore *rec) | |
| { | |
| xfs_inofree_t realfree; | |
| /* if there are no holes, return the first available offset */ | |
| if (!xfs_inobt_issparse(rec->ir_holemask)) | |
| return xfs_lowbit64(rec->ir_free); | |
| realfree = xfs_inobt_irec_to_allocmask(rec); | |
| realfree &= rec->ir_free; | |
| return xfs_lowbit64(realfree); | |
| } | |
| /* | |
| * Allocate an inode using the inobt-only algorithm. | |
| */ | |
| STATIC int | |
| xfs_dialloc_ag_inobt( | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| xfs_ino_t parent, | |
| xfs_ino_t *inop) | |
| { | |
| struct xfs_mount *mp = tp->t_mountp; | |
| struct xfs_agi *agi = agbp->b_addr; | |
| xfs_agnumber_t pagno = XFS_INO_TO_AGNO(mp, parent); | |
| xfs_agino_t pagino = XFS_INO_TO_AGINO(mp, parent); | |
| struct xfs_btree_cur *cur, *tcur; | |
| struct xfs_inobt_rec_incore rec, trec; | |
| xfs_ino_t ino; | |
| int error; | |
| int offset; | |
| int i, j; | |
| int searchdistance = 10; | |
| ASSERT(pag->pagi_init); | |
| ASSERT(pag->pagi_inodeok); | |
| ASSERT(pag->pagi_freecount > 0); | |
| restart_pagno: | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_INO); | |
| /* | |
| * If pagino is 0 (this is the root inode allocation) use newino. | |
| * This must work because we've just allocated some. | |
| */ | |
| if (!pagino) | |
| pagino = be32_to_cpu(agi->agi_newino); | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error0; | |
| /* | |
| * If in the same AG as the parent, try to get near the parent. | |
| */ | |
| if (pagno == pag->pag_agno) { | |
| int doneleft; /* done, to the left */ | |
| int doneright; /* done, to the right */ | |
| error = xfs_inobt_lookup(cur, pagino, XFS_LOOKUP_LE, &i); | |
| if (error) | |
| goto error0; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| error = xfs_inobt_get_rec(cur, &rec, &j); | |
| if (error) | |
| goto error0; | |
| if (XFS_IS_CORRUPT(mp, j != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| if (rec.ir_freecount > 0) { | |
| /* | |
| * Found a free inode in the same chunk | |
| * as the parent, done. | |
| */ | |
| goto alloc_inode; | |
| } | |
| /* | |
| * In the same AG as parent, but parent's chunk is full. | |
| */ | |
| /* duplicate the cursor, search left & right simultaneously */ | |
| error = xfs_btree_dup_cursor(cur, &tcur); | |
| if (error) | |
| goto error0; | |
| /* | |
| * Skip to last blocks looked up if same parent inode. | |
| */ | |
| if (pagino != NULLAGINO && | |
| pag->pagl_pagino == pagino && | |
| pag->pagl_leftrec != NULLAGINO && | |
| pag->pagl_rightrec != NULLAGINO) { | |
| error = xfs_ialloc_get_rec(tcur, pag->pagl_leftrec, | |
| &trec, &doneleft); | |
| if (error) | |
| goto error1; | |
| error = xfs_ialloc_get_rec(cur, pag->pagl_rightrec, | |
| &rec, &doneright); | |
| if (error) | |
| goto error1; | |
| } else { | |
| /* search left with tcur, back up 1 record */ | |
| error = xfs_ialloc_next_rec(tcur, &trec, &doneleft, 1); | |
| if (error) | |
| goto error1; | |
| /* search right with cur, go forward 1 record. */ | |
| error = xfs_ialloc_next_rec(cur, &rec, &doneright, 0); | |
| if (error) | |
| goto error1; | |
| } | |
| /* | |
| * Loop until we find an inode chunk with a free inode. | |
| */ | |
| while (--searchdistance > 0 && (!doneleft || !doneright)) { | |
| int useleft; /* using left inode chunk this time */ | |
| /* figure out the closer block if both are valid. */ | |
| if (!doneleft && !doneright) { | |
| useleft = pagino - | |
| (trec.ir_startino + XFS_INODES_PER_CHUNK - 1) < | |
| rec.ir_startino - pagino; | |
| } else { | |
| useleft = !doneleft; | |
| } | |
| /* free inodes to the left? */ | |
| if (useleft && trec.ir_freecount) { | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| cur = tcur; | |
| pag->pagl_leftrec = trec.ir_startino; | |
| pag->pagl_rightrec = rec.ir_startino; | |
| pag->pagl_pagino = pagino; | |
| rec = trec; | |
| goto alloc_inode; | |
| } | |
| /* free inodes to the right? */ | |
| if (!useleft && rec.ir_freecount) { | |
| xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR); | |
| pag->pagl_leftrec = trec.ir_startino; | |
| pag->pagl_rightrec = rec.ir_startino; | |
| pag->pagl_pagino = pagino; | |
| goto alloc_inode; | |
| } | |
| /* get next record to check */ | |
| if (useleft) { | |
| error = xfs_ialloc_next_rec(tcur, &trec, | |
| &doneleft, 1); | |
| } else { | |
| error = xfs_ialloc_next_rec(cur, &rec, | |
| &doneright, 0); | |
| } | |
| if (error) | |
| goto error1; | |
| } | |
| if (searchdistance <= 0) { | |
| /* | |
| * Not in range - save last search | |
| * location and allocate a new inode | |
| */ | |
| xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR); | |
| pag->pagl_leftrec = trec.ir_startino; | |
| pag->pagl_rightrec = rec.ir_startino; | |
| pag->pagl_pagino = pagino; | |
| } else { | |
| /* | |
| * We've reached the end of the btree. because | |
| * we are only searching a small chunk of the | |
| * btree each search, there is obviously free | |
| * inodes closer to the parent inode than we | |
| * are now. restart the search again. | |
| */ | |
| pag->pagl_pagino = NULLAGINO; | |
| pag->pagl_leftrec = NULLAGINO; | |
| pag->pagl_rightrec = NULLAGINO; | |
| xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR); | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| goto restart_pagno; | |
| } | |
| } | |
| /* | |
| * In a different AG from the parent. | |
| * See if the most recently allocated block has any free. | |
| */ | |
| if (agi->agi_newino != cpu_to_be32(NULLAGINO)) { | |
| error = xfs_inobt_lookup(cur, be32_to_cpu(agi->agi_newino), | |
| XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| goto error0; | |
| if (i == 1) { | |
| error = xfs_inobt_get_rec(cur, &rec, &j); | |
| if (error) | |
| goto error0; | |
| if (j == 1 && rec.ir_freecount > 0) { | |
| /* | |
| * The last chunk allocated in the group | |
| * still has a free inode. | |
| */ | |
| goto alloc_inode; | |
| } | |
| } | |
| } | |
| /* | |
| * None left in the last group, search the whole AG | |
| */ | |
| error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &i); | |
| if (error) | |
| goto error0; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| for (;;) { | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) | |
| goto error0; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| if (rec.ir_freecount > 0) | |
| break; | |
| error = xfs_btree_increment(cur, 0, &i); | |
| if (error) | |
| goto error0; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| } | |
| alloc_inode: | |
| offset = xfs_inobt_first_free_inode(&rec); | |
| ASSERT(offset >= 0); | |
| ASSERT(offset < XFS_INODES_PER_CHUNK); | |
| ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % | |
| XFS_INODES_PER_CHUNK) == 0); | |
| ino = XFS_AGINO_TO_INO(mp, pag->pag_agno, rec.ir_startino + offset); | |
| rec.ir_free &= ~XFS_INOBT_MASK(offset); | |
| rec.ir_freecount--; | |
| error = xfs_inobt_update(cur, &rec); | |
| if (error) | |
| goto error0; | |
| be32_add_cpu(&agi->agi_freecount, -1); | |
| xfs_ialloc_log_agi(tp, agbp, XFS_AGI_FREECOUNT); | |
| pag->pagi_freecount--; | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error0; | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, -1); | |
| *inop = ino; | |
| return 0; | |
| error1: | |
| xfs_btree_del_cursor(tcur, XFS_BTREE_ERROR); | |
| error0: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| /* | |
| * Use the free inode btree to allocate an inode based on distance from the | |
| * parent. Note that the provided cursor may be deleted and replaced. | |
| */ | |
| STATIC int | |
| xfs_dialloc_ag_finobt_near( | |
| xfs_agino_t pagino, | |
| struct xfs_btree_cur **ocur, | |
| struct xfs_inobt_rec_incore *rec) | |
| { | |
| struct xfs_btree_cur *lcur = *ocur; /* left search cursor */ | |
| struct xfs_btree_cur *rcur; /* right search cursor */ | |
| struct xfs_inobt_rec_incore rrec; | |
| int error; | |
| int i, j; | |
| error = xfs_inobt_lookup(lcur, pagino, XFS_LOOKUP_LE, &i); | |
| if (error) | |
| return error; | |
| if (i == 1) { | |
| error = xfs_inobt_get_rec(lcur, rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(lcur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| /* | |
| * See if we've landed in the parent inode record. The finobt | |
| * only tracks chunks with at least one free inode, so record | |
| * existence is enough. | |
| */ | |
| if (pagino >= rec->ir_startino && | |
| pagino < (rec->ir_startino + XFS_INODES_PER_CHUNK)) | |
| return 0; | |
| } | |
| error = xfs_btree_dup_cursor(lcur, &rcur); | |
| if (error) | |
| return error; | |
| error = xfs_inobt_lookup(rcur, pagino, XFS_LOOKUP_GE, &j); | |
| if (error) | |
| goto error_rcur; | |
| if (j == 1) { | |
| error = xfs_inobt_get_rec(rcur, &rrec, &j); | |
| if (error) | |
| goto error_rcur; | |
| if (XFS_IS_CORRUPT(lcur->bc_mp, j != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error_rcur; | |
| } | |
| } | |
| if (XFS_IS_CORRUPT(lcur->bc_mp, i != 1 && j != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error_rcur; | |
| } | |
| if (i == 1 && j == 1) { | |
| /* | |
| * Both the left and right records are valid. Choose the closer | |
| * inode chunk to the target. | |
| */ | |
| if ((pagino - rec->ir_startino + XFS_INODES_PER_CHUNK - 1) > | |
| (rrec.ir_startino - pagino)) { | |
| *rec = rrec; | |
| xfs_btree_del_cursor(lcur, XFS_BTREE_NOERROR); | |
| *ocur = rcur; | |
| } else { | |
| xfs_btree_del_cursor(rcur, XFS_BTREE_NOERROR); | |
| } | |
| } else if (j == 1) { | |
| /* only the right record is valid */ | |
| *rec = rrec; | |
| xfs_btree_del_cursor(lcur, XFS_BTREE_NOERROR); | |
| *ocur = rcur; | |
| } else if (i == 1) { | |
| /* only the left record is valid */ | |
| xfs_btree_del_cursor(rcur, XFS_BTREE_NOERROR); | |
| } | |
| return 0; | |
| error_rcur: | |
| xfs_btree_del_cursor(rcur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| /* | |
| * Use the free inode btree to find a free inode based on a newino hint. If | |
| * the hint is NULL, find the first free inode in the AG. | |
| */ | |
| STATIC int | |
| xfs_dialloc_ag_finobt_newino( | |
| struct xfs_agi *agi, | |
| struct xfs_btree_cur *cur, | |
| struct xfs_inobt_rec_incore *rec) | |
| { | |
| int error; | |
| int i; | |
| if (agi->agi_newino != cpu_to_be32(NULLAGINO)) { | |
| error = xfs_inobt_lookup(cur, be32_to_cpu(agi->agi_newino), | |
| XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| return error; | |
| if (i == 1) { | |
| error = xfs_inobt_get_rec(cur, rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| return 0; | |
| } | |
| } | |
| /* | |
| * Find the first inode available in the AG. | |
| */ | |
| error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| error = xfs_inobt_get_rec(cur, rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| return 0; | |
| } | |
| /* | |
| * Update the inobt based on a modification made to the finobt. Also ensure that | |
| * the records from both trees are equivalent post-modification. | |
| */ | |
| STATIC int | |
| xfs_dialloc_ag_update_inobt( | |
| struct xfs_btree_cur *cur, /* inobt cursor */ | |
| struct xfs_inobt_rec_incore *frec, /* finobt record */ | |
| int offset) /* inode offset */ | |
| { | |
| struct xfs_inobt_rec_incore rec; | |
| int error; | |
| int i; | |
| error = xfs_inobt_lookup(cur, frec->ir_startino, XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) | |
| return error; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, i != 1)) | |
| return -EFSCORRUPTED; | |
| ASSERT((XFS_AGINO_TO_OFFSET(cur->bc_mp, rec.ir_startino) % | |
| XFS_INODES_PER_CHUNK) == 0); | |
| rec.ir_free &= ~XFS_INOBT_MASK(offset); | |
| rec.ir_freecount--; | |
| if (XFS_IS_CORRUPT(cur->bc_mp, | |
| rec.ir_free != frec->ir_free || | |
| rec.ir_freecount != frec->ir_freecount)) | |
| return -EFSCORRUPTED; | |
| return xfs_inobt_update(cur, &rec); | |
| } | |
| /* | |
| * Allocate an inode using the free inode btree, if available. Otherwise, fall | |
| * back to the inobt search algorithm. | |
| * | |
| * The caller selected an AG for us, and made sure that free inodes are | |
| * available. | |
| */ | |
| static int | |
| xfs_dialloc_ag( | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| xfs_ino_t parent, | |
| xfs_ino_t *inop) | |
| { | |
| struct xfs_mount *mp = tp->t_mountp; | |
| struct xfs_agi *agi = agbp->b_addr; | |
| xfs_agnumber_t pagno = XFS_INO_TO_AGNO(mp, parent); | |
| xfs_agino_t pagino = XFS_INO_TO_AGINO(mp, parent); | |
| struct xfs_btree_cur *cur; /* finobt cursor */ | |
| struct xfs_btree_cur *icur; /* inobt cursor */ | |
| struct xfs_inobt_rec_incore rec; | |
| xfs_ino_t ino; | |
| int error; | |
| int offset; | |
| int i; | |
| if (!xfs_has_finobt(mp)) | |
| return xfs_dialloc_ag_inobt(tp, agbp, pag, parent, inop); | |
| /* | |
| * If pagino is 0 (this is the root inode allocation) use newino. | |
| * This must work because we've just allocated some. | |
| */ | |
| if (!pagino) | |
| pagino = be32_to_cpu(agi->agi_newino); | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_FINO); | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error_cur; | |
| /* | |
| * The search algorithm depends on whether we're in the same AG as the | |
| * parent. If so, find the closest available inode to the parent. If | |
| * not, consider the agi hint or find the first free inode in the AG. | |
| */ | |
| if (pag->pag_agno == pagno) | |
| error = xfs_dialloc_ag_finobt_near(pagino, &cur, &rec); | |
| else | |
| error = xfs_dialloc_ag_finobt_newino(agi, cur, &rec); | |
| if (error) | |
| goto error_cur; | |
| offset = xfs_inobt_first_free_inode(&rec); | |
| ASSERT(offset >= 0); | |
| ASSERT(offset < XFS_INODES_PER_CHUNK); | |
| ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % | |
| XFS_INODES_PER_CHUNK) == 0); | |
| ino = XFS_AGINO_TO_INO(mp, pag->pag_agno, rec.ir_startino + offset); | |
| /* | |
| * Modify or remove the finobt record. | |
| */ | |
| rec.ir_free &= ~XFS_INOBT_MASK(offset); | |
| rec.ir_freecount--; | |
| if (rec.ir_freecount) | |
| error = xfs_inobt_update(cur, &rec); | |
| else | |
| error = xfs_btree_delete(cur, &i); | |
| if (error) | |
| goto error_cur; | |
| /* | |
| * The finobt has now been updated appropriately. We haven't updated the | |
| * agi and superblock yet, so we can create an inobt cursor and validate | |
| * the original freecount. If all is well, make the equivalent update to | |
| * the inobt using the finobt record and offset information. | |
| */ | |
| icur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_INO); | |
| error = xfs_check_agi_freecount(icur); | |
| if (error) | |
| goto error_icur; | |
| error = xfs_dialloc_ag_update_inobt(icur, &rec, offset); | |
| if (error) | |
| goto error_icur; | |
| /* | |
| * Both trees have now been updated. We must update the perag and | |
| * superblock before we can check the freecount for each btree. | |
| */ | |
| be32_add_cpu(&agi->agi_freecount, -1); | |
| xfs_ialloc_log_agi(tp, agbp, XFS_AGI_FREECOUNT); | |
| pag->pagi_freecount--; | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, -1); | |
| error = xfs_check_agi_freecount(icur); | |
| if (error) | |
| goto error_icur; | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error_icur; | |
| xfs_btree_del_cursor(icur, XFS_BTREE_NOERROR); | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| *inop = ino; | |
| return 0; | |
| error_icur: | |
| xfs_btree_del_cursor(icur, XFS_BTREE_ERROR); | |
| error_cur: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| static int | |
| xfs_dialloc_roll( | |
| struct xfs_trans **tpp, | |
| struct xfs_buf *agibp) | |
| { | |
| struct xfs_trans *tp = *tpp; | |
| struct xfs_dquot_acct *dqinfo; | |
| int error; | |
| /* | |
| * Hold to on to the agibp across the commit so no other allocation can | |
| * come in and take the free inodes we just allocated for our caller. | |
| */ | |
| xfs_trans_bhold(tp, agibp); | |
| /* | |
| * We want the quota changes to be associated with the next transaction, | |
| * NOT this one. So, detach the dqinfo from this and attach it to the | |
| * next transaction. | |
| */ | |
| dqinfo = tp->t_dqinfo; | |
| tp->t_dqinfo = NULL; | |
| error = xfs_trans_roll(&tp); | |
| /* Re-attach the quota info that we detached from prev trx. */ | |
| tp->t_dqinfo = dqinfo; | |
| /* | |
| * Join the buffer even on commit error so that the buffer is released | |
| * when the caller cancels the transaction and doesn't have to handle | |
| * this error case specially. | |
| */ | |
| xfs_trans_bjoin(tp, agibp); | |
| *tpp = tp; | |
| return error; | |
| } | |
| static xfs_agnumber_t | |
| xfs_ialloc_next_ag( | |
| xfs_mount_t *mp) | |
| { | |
| xfs_agnumber_t agno; | |
| spin_lock(&mp->m_agirotor_lock); | |
| agno = mp->m_agirotor; | |
| if (++mp->m_agirotor >= mp->m_maxagi) | |
| mp->m_agirotor = 0; | |
| spin_unlock(&mp->m_agirotor_lock); | |
| return agno; | |
| } | |
| static bool | |
| xfs_dialloc_good_ag( | |
| struct xfs_trans *tp, | |
| struct xfs_perag *pag, | |
| umode_t mode, | |
| int flags, | |
| bool ok_alloc) | |
| { | |
| struct xfs_mount *mp = tp->t_mountp; | |
| xfs_extlen_t ineed; | |
| xfs_extlen_t longest = 0; | |
| int needspace; | |
| int error; | |
| if (!pag->pagi_inodeok) | |
| return false; | |
| if (!pag->pagi_init) { | |
| error = xfs_ialloc_pagi_init(mp, tp, pag->pag_agno); | |
| if (error) | |
| return false; | |
| } | |
| if (pag->pagi_freecount) | |
| return true; | |
| if (!ok_alloc) | |
| return false; | |
| if (!pag->pagf_init) { | |
| error = xfs_alloc_pagf_init(mp, tp, pag->pag_agno, flags); | |
| if (error) | |
| return false; | |
| } | |
| /* | |
| * Check that there is enough free space for the file plus a chunk of | |
| * inodes if we need to allocate some. If this is the first pass across | |
| * the AGs, take into account the potential space needed for alignment | |
| * of inode chunks when checking the longest contiguous free space in | |
| * the AG - this prevents us from getting ENOSPC because we have free | |
| * space larger than ialloc_blks but alignment constraints prevent us | |
| * from using it. | |
| * | |
| * If we can't find an AG with space for full alignment slack to be | |
| * taken into account, we must be near ENOSPC in all AGs. Hence we | |
| * don't include alignment for the second pass and so if we fail | |
| * allocation due to alignment issues then it is most likely a real | |
| * ENOSPC condition. | |
| * | |
| * XXX(dgc): this calculation is now bogus thanks to the per-ag | |
| * reservations that xfs_alloc_fix_freelist() now does via | |
| * xfs_alloc_space_available(). When the AG fills up, pagf_freeblks will | |
| * be more than large enough for the check below to succeed, but | |
| * xfs_alloc_space_available() will fail because of the non-zero | |
| * metadata reservation and hence we won't actually be able to allocate | |
| * more inodes in this AG. We do soooo much unnecessary work near ENOSPC | |
| * because of this. | |
| */ | |
| ineed = M_IGEO(mp)->ialloc_min_blks; | |
| if (flags && ineed > 1) | |
| ineed += M_IGEO(mp)->cluster_align; | |
| longest = pag->pagf_longest; | |
| if (!longest) | |
| longest = pag->pagf_flcount > 0; | |
| needspace = S_ISDIR(mode) || S_ISREG(mode) || S_ISLNK(mode); | |
| if (pag->pagf_freeblks < needspace + ineed || longest < ineed) | |
| return false; | |
| return true; | |
| } | |
| static int | |
| xfs_dialloc_try_ag( | |
| struct xfs_trans **tpp, | |
| struct xfs_perag *pag, | |
| xfs_ino_t parent, | |
| xfs_ino_t *new_ino, | |
| bool ok_alloc) | |
| { | |
| struct xfs_buf *agbp; | |
| xfs_ino_t ino; | |
| int error; | |
| /* | |
| * Then read in the AGI buffer and recheck with the AGI buffer | |
| * lock held. | |
| */ | |
| error = xfs_ialloc_read_agi(pag->pag_mount, *tpp, pag->pag_agno, &agbp); | |
| if (error) | |
| return error; | |
| if (!pag->pagi_freecount) { | |
| if (!ok_alloc) { | |
| error = -EAGAIN; | |
| goto out_release; | |
| } | |
| error = xfs_ialloc_ag_alloc(*tpp, agbp, pag); | |
| if (error < 0) | |
| goto out_release; | |
| /* | |
| * We successfully allocated space for an inode cluster in this | |
| * AG. Roll the transaction so that we can allocate one of the | |
| * new inodes. | |
| */ | |
| ASSERT(pag->pagi_freecount > 0); | |
| error = xfs_dialloc_roll(tpp, agbp); | |
| if (error) | |
| goto out_release; | |
| } | |
| /* Allocate an inode in the found AG */ | |
| error = xfs_dialloc_ag(*tpp, agbp, pag, parent, &ino); | |
| if (!error) | |
| *new_ino = ino; | |
| return error; | |
| out_release: | |
| xfs_trans_brelse(*tpp, agbp); | |
| return error; | |
| } | |
| /* | |
| * Allocate an on-disk inode. | |
| * | |
| * Mode is used to tell whether the new inode is a directory and hence where to | |
| * locate it. The on-disk inode that is allocated will be returned in @new_ino | |
| * on success, otherwise an error will be set to indicate the failure (e.g. | |
| * -ENOSPC). | |
| */ | |
| int | |
| xfs_dialloc( | |
| struct xfs_trans **tpp, | |
| xfs_ino_t parent, | |
| umode_t mode, | |
| xfs_ino_t *new_ino) | |
| { | |
| struct xfs_mount *mp = (*tpp)->t_mountp; | |
| xfs_agnumber_t agno; | |
| int error = 0; | |
| xfs_agnumber_t start_agno; | |
| struct xfs_perag *pag; | |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); | |
| bool ok_alloc = true; | |
| int flags; | |
| xfs_ino_t ino; | |
| /* | |
| * Directories, symlinks, and regular files frequently allocate at least | |
| * one block, so factor that potential expansion when we examine whether | |
| * an AG has enough space for file creation. | |
| */ | |
| if (S_ISDIR(mode)) | |
| start_agno = xfs_ialloc_next_ag(mp); | |
| else { | |
| start_agno = XFS_INO_TO_AGNO(mp, parent); | |
| if (start_agno >= mp->m_maxagi) | |
| start_agno = 0; | |
| } | |
| /* | |
| * If we have already hit the ceiling of inode blocks then clear | |
| * ok_alloc so we scan all available agi structures for a free | |
| * inode. | |
| * | |
| * Read rough value of mp->m_icount by percpu_counter_read_positive, | |
| * which will sacrifice the preciseness but improve the performance. | |
| */ | |
| if (igeo->maxicount && | |
| percpu_counter_read_positive(&mp->m_icount) + igeo->ialloc_inos | |
| > igeo->maxicount) { | |
| ok_alloc = false; | |
| } | |
| /* | |
| * Loop until we find an allocation group that either has free inodes | |
| * or in which we can allocate some inodes. Iterate through the | |
| * allocation groups upward, wrapping at the end. | |
| */ | |
| agno = start_agno; | |
| flags = XFS_ALLOC_FLAG_TRYLOCK; | |
| for (;;) { | |
| pag = xfs_perag_get(mp, agno); | |
| if (xfs_dialloc_good_ag(*tpp, pag, mode, flags, ok_alloc)) { | |
| error = xfs_dialloc_try_ag(tpp, pag, parent, | |
| &ino, ok_alloc); | |
| if (error != -EAGAIN) | |
| break; | |
| } | |
| if (xfs_is_shutdown(mp)) { | |
| error = -EFSCORRUPTED; | |
| break; | |
| } | |
| if (++agno == mp->m_maxagi) | |
| agno = 0; | |
| if (agno == start_agno) { | |
| if (!flags) { | |
| error = -ENOSPC; | |
| break; | |
| } | |
| flags = 0; | |
| } | |
| xfs_perag_put(pag); | |
| } | |
| if (!error) | |
| *new_ino = ino; | |
| xfs_perag_put(pag); | |
| return error; | |
| } | |
| /* | |
| * Free the blocks of an inode chunk. We must consider that the inode chunk | |
| * might be sparse and only free the regions that are allocated as part of the | |
| * chunk. | |
| */ | |
| STATIC void | |
| xfs_difree_inode_chunk( | |
| struct xfs_trans *tp, | |
| xfs_agnumber_t agno, | |
| struct xfs_inobt_rec_incore *rec) | |
| { | |
| struct xfs_mount *mp = tp->t_mountp; | |
| xfs_agblock_t sagbno = XFS_AGINO_TO_AGBNO(mp, | |
| rec->ir_startino); | |
| int startidx, endidx; | |
| int nextbit; | |
| xfs_agblock_t agbno; | |
| int contigblk; | |
| DECLARE_BITMAP(holemask, XFS_INOBT_HOLEMASK_BITS); | |
| if (!xfs_inobt_issparse(rec->ir_holemask)) { | |
| /* not sparse, calculate extent info directly */ | |
| xfs_free_extent_later(tp, XFS_AGB_TO_FSB(mp, agno, sagbno), | |
| M_IGEO(mp)->ialloc_blks, | |
| &XFS_RMAP_OINFO_INODES); | |
| return; | |
| } | |
| /* holemask is only 16-bits (fits in an unsigned long) */ | |
| ASSERT(sizeof(rec->ir_holemask) <= sizeof(holemask[0])); | |
| holemask[0] = rec->ir_holemask; | |
| /* | |
| * Find contiguous ranges of zeroes (i.e., allocated regions) in the | |
| * holemask and convert the start/end index of each range to an extent. | |
| * We start with the start and end index both pointing at the first 0 in | |
| * the mask. | |
| */ | |
| startidx = endidx = find_first_zero_bit(holemask, | |
| XFS_INOBT_HOLEMASK_BITS); | |
| nextbit = startidx + 1; | |
| while (startidx < XFS_INOBT_HOLEMASK_BITS) { | |
| nextbit = find_next_zero_bit(holemask, XFS_INOBT_HOLEMASK_BITS, | |
| nextbit); | |
| /* | |
| * If the next zero bit is contiguous, update the end index of | |
| * the current range and continue. | |
| */ | |
| if (nextbit != XFS_INOBT_HOLEMASK_BITS && | |
| nextbit == endidx + 1) { | |
| endidx = nextbit; | |
| goto next; | |
| } | |
| /* | |
| * nextbit is not contiguous with the current end index. Convert | |
| * the current start/end to an extent and add it to the free | |
| * list. | |
| */ | |
| agbno = sagbno + (startidx * XFS_INODES_PER_HOLEMASK_BIT) / | |
| mp->m_sb.sb_inopblock; | |
| contigblk = ((endidx - startidx + 1) * | |
| XFS_INODES_PER_HOLEMASK_BIT) / | |
| mp->m_sb.sb_inopblock; | |
| ASSERT(agbno % mp->m_sb.sb_spino_align == 0); | |
| ASSERT(contigblk % mp->m_sb.sb_spino_align == 0); | |
| xfs_free_extent_later(tp, XFS_AGB_TO_FSB(mp, agno, agbno), | |
| contigblk, &XFS_RMAP_OINFO_INODES); | |
| /* reset range to current bit and carry on... */ | |
| startidx = endidx = nextbit; | |
| next: | |
| nextbit++; | |
| } | |
| } | |
| STATIC int | |
| xfs_difree_inobt( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| xfs_agino_t agino, | |
| struct xfs_icluster *xic, | |
| struct xfs_inobt_rec_incore *orec) | |
| { | |
| struct xfs_agi *agi = agbp->b_addr; | |
| struct xfs_btree_cur *cur; | |
| struct xfs_inobt_rec_incore rec; | |
| int ilen; | |
| int error; | |
| int i; | |
| int off; | |
| ASSERT(agi->agi_magicnum == cpu_to_be32(XFS_AGI_MAGIC)); | |
| ASSERT(XFS_AGINO_TO_AGBNO(mp, agino) < be32_to_cpu(agi->agi_length)); | |
| /* | |
| * Initialize the cursor. | |
| */ | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_INO); | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error0; | |
| /* | |
| * Look for the entry describing this inode. | |
| */ | |
| if ((error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i))) { | |
| xfs_warn(mp, "%s: xfs_inobt_lookup() returned error %d.", | |
| __func__, error); | |
| goto error0; | |
| } | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) { | |
| xfs_warn(mp, "%s: xfs_inobt_get_rec() returned error %d.", | |
| __func__, error); | |
| goto error0; | |
| } | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error0; | |
| } | |
| /* | |
| * Get the offset in the inode chunk. | |
| */ | |
| off = agino - rec.ir_startino; | |
| ASSERT(off >= 0 && off < XFS_INODES_PER_CHUNK); | |
| ASSERT(!(rec.ir_free & XFS_INOBT_MASK(off))); | |
| /* | |
| * Mark the inode free & increment the count. | |
| */ | |
| rec.ir_free |= XFS_INOBT_MASK(off); | |
| rec.ir_freecount++; | |
| /* | |
| * When an inode chunk is free, it becomes eligible for removal. Don't | |
| * remove the chunk if the block size is large enough for multiple inode | |
| * chunks (that might not be free). | |
| */ | |
| if (!xfs_has_ikeep(mp) && rec.ir_free == XFS_INOBT_ALL_FREE && | |
| mp->m_sb.sb_inopblock <= XFS_INODES_PER_CHUNK) { | |
| struct xfs_perag *pag = agbp->b_pag; | |
| xic->deleted = true; | |
| xic->first_ino = XFS_AGINO_TO_INO(mp, pag->pag_agno, | |
| rec.ir_startino); | |
| xic->alloc = xfs_inobt_irec_to_allocmask(&rec); | |
| /* | |
| * Remove the inode cluster from the AGI B+Tree, adjust the | |
| * AGI and Superblock inode counts, and mark the disk space | |
| * to be freed when the transaction is committed. | |
| */ | |
| ilen = rec.ir_freecount; | |
| be32_add_cpu(&agi->agi_count, -ilen); | |
| be32_add_cpu(&agi->agi_freecount, -(ilen - 1)); | |
| xfs_ialloc_log_agi(tp, agbp, XFS_AGI_COUNT | XFS_AGI_FREECOUNT); | |
| pag->pagi_freecount -= ilen - 1; | |
| pag->pagi_count -= ilen; | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_ICOUNT, -ilen); | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, -(ilen - 1)); | |
| if ((error = xfs_btree_delete(cur, &i))) { | |
| xfs_warn(mp, "%s: xfs_btree_delete returned error %d.", | |
| __func__, error); | |
| goto error0; | |
| } | |
| xfs_difree_inode_chunk(tp, pag->pag_agno, &rec); | |
| } else { | |
| xic->deleted = false; | |
| error = xfs_inobt_update(cur, &rec); | |
| if (error) { | |
| xfs_warn(mp, "%s: xfs_inobt_update returned error %d.", | |
| __func__, error); | |
| goto error0; | |
| } | |
| /* | |
| * Change the inode free counts and log the ag/sb changes. | |
| */ | |
| be32_add_cpu(&agi->agi_freecount, 1); | |
| xfs_ialloc_log_agi(tp, agbp, XFS_AGI_FREECOUNT); | |
| pag->pagi_freecount++; | |
| xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, 1); | |
| } | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error0; | |
| *orec = rec; | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| return 0; | |
| error0: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| /* | |
| * Free an inode in the free inode btree. | |
| */ | |
| STATIC int | |
| xfs_difree_finobt( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct xfs_buf *agbp, | |
| struct xfs_perag *pag, | |
| xfs_agino_t agino, | |
| struct xfs_inobt_rec_incore *ibtrec) /* inobt record */ | |
| { | |
| struct xfs_btree_cur *cur; | |
| struct xfs_inobt_rec_incore rec; | |
| int offset = agino - ibtrec->ir_startino; | |
| int error; | |
| int i; | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_FINO); | |
| error = xfs_inobt_lookup(cur, ibtrec->ir_startino, XFS_LOOKUP_EQ, &i); | |
| if (error) | |
| goto error; | |
| if (i == 0) { | |
| /* | |
| * If the record does not exist in the finobt, we must have just | |
| * freed an inode in a previously fully allocated chunk. If not, | |
| * something is out of sync. | |
| */ | |
| if (XFS_IS_CORRUPT(mp, ibtrec->ir_freecount != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| error = xfs_inobt_insert_rec(cur, ibtrec->ir_holemask, | |
| ibtrec->ir_count, | |
| ibtrec->ir_freecount, | |
| ibtrec->ir_free, &i); | |
| if (error) | |
| goto error; | |
| ASSERT(i == 1); | |
| goto out; | |
| } | |
| /* | |
| * Read and update the existing record. We could just copy the ibtrec | |
| * across here, but that would defeat the purpose of having redundant | |
| * metadata. By making the modifications independently, we can catch | |
| * corruptions that we wouldn't see if we just copied from one record | |
| * to another. | |
| */ | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (error) | |
| goto error; | |
| if (XFS_IS_CORRUPT(mp, i != 1)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| rec.ir_free |= XFS_INOBT_MASK(offset); | |
| rec.ir_freecount++; | |
| if (XFS_IS_CORRUPT(mp, | |
| rec.ir_free != ibtrec->ir_free || | |
| rec.ir_freecount != ibtrec->ir_freecount)) { | |
| error = -EFSCORRUPTED; | |
| goto error; | |
| } | |
| /* | |
| * The content of inobt records should always match between the inobt | |
| * and finobt. The lifecycle of records in the finobt is different from | |
| * the inobt in that the finobt only tracks records with at least one | |
| * free inode. Hence, if all of the inodes are free and we aren't | |
| * keeping inode chunks permanently on disk, remove the record. | |
| * Otherwise, update the record with the new information. | |
| * | |
| * Note that we currently can't free chunks when the block size is large | |
| * enough for multiple chunks. Leave the finobt record to remain in sync | |
| * with the inobt. | |
| */ | |
| if (!xfs_has_ikeep(mp) && rec.ir_free == XFS_INOBT_ALL_FREE && | |
| mp->m_sb.sb_inopblock <= XFS_INODES_PER_CHUNK) { | |
| error = xfs_btree_delete(cur, &i); | |
| if (error) | |
| goto error; | |
| ASSERT(i == 1); | |
| } else { | |
| error = xfs_inobt_update(cur, &rec); | |
| if (error) | |
| goto error; | |
| } | |
| out: | |
| error = xfs_check_agi_freecount(cur); | |
| if (error) | |
| goto error; | |
| xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); | |
| return 0; | |
| error: | |
| xfs_btree_del_cursor(cur, XFS_BTREE_ERROR); | |
| return error; | |
| } | |
| /* | |
| * Free disk inode. Carefully avoids touching the incore inode, all | |
| * manipulations incore are the caller's responsibility. | |
| * The on-disk inode is not changed by this operation, only the | |
| * btree (free inode mask) is changed. | |
| */ | |
| int | |
| xfs_difree( | |
| struct xfs_trans *tp, | |
| struct xfs_perag *pag, | |
| xfs_ino_t inode, | |
| struct xfs_icluster *xic) | |
| { | |
| /* REFERENCED */ | |
| xfs_agblock_t agbno; /* block number containing inode */ | |
| struct xfs_buf *agbp; /* buffer for allocation group header */ | |
| xfs_agino_t agino; /* allocation group inode number */ | |
| int error; /* error return value */ | |
| struct xfs_mount *mp = tp->t_mountp; | |
| struct xfs_inobt_rec_incore rec;/* btree record */ | |
| /* | |
| * Break up inode number into its components. | |
| */ | |
| if (pag->pag_agno != XFS_INO_TO_AGNO(mp, inode)) { | |
| xfs_warn(mp, "%s: agno != pag->pag_agno (%d != %d).", | |
| __func__, XFS_INO_TO_AGNO(mp, inode), pag->pag_agno); | |
| ASSERT(0); | |
| return -EINVAL; | |
| } | |
| agino = XFS_INO_TO_AGINO(mp, inode); | |
| if (inode != XFS_AGINO_TO_INO(mp, pag->pag_agno, agino)) { | |
| xfs_warn(mp, "%s: inode != XFS_AGINO_TO_INO() (%llu != %llu).", | |
| __func__, (unsigned long long)inode, | |
| (unsigned long long)XFS_AGINO_TO_INO(mp, pag->pag_agno, agino)); | |
| ASSERT(0); | |
| return -EINVAL; | |
| } | |
| agbno = XFS_AGINO_TO_AGBNO(mp, agino); | |
| if (agbno >= mp->m_sb.sb_agblocks) { | |
| xfs_warn(mp, "%s: agbno >= mp->m_sb.sb_agblocks (%d >= %d).", | |
| __func__, agbno, mp->m_sb.sb_agblocks); | |
| ASSERT(0); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Get the allocation group header. | |
| */ | |
| error = xfs_ialloc_read_agi(mp, tp, pag->pag_agno, &agbp); | |
| if (error) { | |
| xfs_warn(mp, "%s: xfs_ialloc_read_agi() returned error %d.", | |
| __func__, error); | |
| return error; | |
| } | |
| /* | |
| * Fix up the inode allocation btree. | |
| */ | |
| error = xfs_difree_inobt(mp, tp, agbp, pag, agino, xic, &rec); | |
| if (error) | |
| goto error0; | |
| /* | |
| * Fix up the free inode btree. | |
| */ | |
| if (xfs_has_finobt(mp)) { | |
| error = xfs_difree_finobt(mp, tp, agbp, pag, agino, &rec); | |
| if (error) | |
| goto error0; | |
| } | |
| return 0; | |
| error0: | |
| return error; | |
| } | |
| STATIC int | |
| xfs_imap_lookup( | |
| struct xfs_mount *mp, | |
| struct xfs_trans *tp, | |
| struct xfs_perag *pag, | |
| xfs_agino_t agino, | |
| xfs_agblock_t agbno, | |
| xfs_agblock_t *chunk_agbno, | |
| xfs_agblock_t *offset_agbno, | |
| int flags) | |
| { | |
| struct xfs_inobt_rec_incore rec; | |
| struct xfs_btree_cur *cur; | |
| struct xfs_buf *agbp; | |
| int error; | |
| int i; | |
| error = xfs_ialloc_read_agi(mp, tp, pag->pag_agno, &agbp); | |
| if (error) { | |
| xfs_alert(mp, | |
| "%s: xfs_ialloc_read_agi() returned error %d, agno %d", | |
| __func__, error, pag->pag_agno); | |
| return error; | |
| } | |
| /* | |
| * Lookup the inode record for the given agino. If the record cannot be | |
| * found, then it's an invalid inode number and we should abort. Once | |
| * we have a record, we need to ensure it contains the inode number | |
| * we are looking up. | |
| */ | |
| cur = xfs_inobt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_INO); | |
| error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i); | |
| if (!error) { | |
| if (i) | |
| error = xfs_inobt_get_rec(cur, &rec, &i); | |
| if (!error && i == 0) | |
| error = -EINVAL; | |
| } | |
| xfs_trans_brelse(tp, agbp); | |
| xfs_btree_del_cursor(cur, error); | |
| if (error) | |
| return error; | |
| /* check that the returned record contains the required inode */ | |
| if (rec.ir_startino > agino || | |
| rec.ir_startino + M_IGEO(mp)->ialloc_inos <= agino) | |
| return -EINVAL; | |
| /* for untrusted inodes check it is allocated first */ | |
| if ((flags & XFS_IGET_UNTRUSTED) && | |
| (rec.ir_free & XFS_INOBT_MASK(agino - rec.ir_startino))) | |
| return -EINVAL; | |
| *chunk_agbno = XFS_AGINO_TO_AGBNO(mp, rec.ir_startino); | |
| *offset_agbno = agbno - *chunk_agbno; | |
| return 0; | |
| } | |
| /* | |
| * Return the location of the inode in imap, for mapping it into a buffer. | |
| */ | |
| int | |
| xfs_imap( | |
| struct xfs_mount *mp, /* file system mount structure */ | |
| struct xfs_trans *tp, /* transaction pointer */ | |
| xfs_ino_t ino, /* inode to locate */ | |
| struct xfs_imap *imap, /* location map structure */ | |
| uint flags) /* flags for inode btree lookup */ | |
| { | |
| xfs_agblock_t agbno; /* block number of inode in the alloc group */ | |
| xfs_agino_t agino; /* inode number within alloc group */ | |
| xfs_agblock_t chunk_agbno; /* first block in inode chunk */ | |
| xfs_agblock_t cluster_agbno; /* first block in inode cluster */ | |
| int error; /* error code */ | |
| int offset; /* index of inode in its buffer */ | |
| xfs_agblock_t offset_agbno; /* blks from chunk start to inode */ | |
| struct xfs_perag *pag; | |
| ASSERT(ino != NULLFSINO); | |
| /* | |
| * Split up the inode number into its parts. | |
| */ | |
| pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino)); | |
| agino = XFS_INO_TO_AGINO(mp, ino); | |
| agbno = XFS_AGINO_TO_AGBNO(mp, agino); | |
| if (!pag || agbno >= mp->m_sb.sb_agblocks || | |
| ino != XFS_AGINO_TO_INO(mp, pag->pag_agno, agino)) { | |
| error = -EINVAL; | |
| #ifdef DEBUG | |
| /* | |
| * Don't output diagnostic information for untrusted inodes | |
| * as they can be invalid without implying corruption. | |
| */ | |
| if (flags & XFS_IGET_UNTRUSTED) | |
| goto out_drop; | |
| if (!pag) { | |
| xfs_alert(mp, | |
| "%s: agno (%d) >= mp->m_sb.sb_agcount (%d)", | |
| __func__, XFS_INO_TO_AGNO(mp, ino), | |
| mp->m_sb.sb_agcount); | |
| } | |
| if (agbno >= mp->m_sb.sb_agblocks) { | |
| xfs_alert(mp, | |
| "%s: agbno (0x%llx) >= mp->m_sb.sb_agblocks (0x%lx)", | |
| __func__, (unsigned long long)agbno, | |
| (unsigned long)mp->m_sb.sb_agblocks); | |
| } | |
| if (pag && ino != XFS_AGINO_TO_INO(mp, pag->pag_agno, agino)) { | |
| xfs_alert(mp, | |
| "%s: ino (0x%llx) != XFS_AGINO_TO_INO() (0x%llx)", | |
| __func__, ino, | |
| XFS_AGINO_TO_INO(mp, pag->pag_agno, agino)); | |
| } | |
| xfs_stack_trace(); | |
| #endif /* DEBUG */ | |
| goto out_drop; | |
| } | |
| /* | |
| * For bulkstat and handle lookups, we have an untrusted inode number | |
| * that we have to verify is valid. We cannot do this just by reading | |
| * the inode buffer as it may have been unlinked and removed leaving | |
| * inodes in stale state on disk. Hence we have to do a btree lookup | |
| * in all cases where an untrusted inode number is passed. | |
| */ | |
| if (flags & XFS_IGET_UNTRUSTED) { | |
| error = xfs_imap_lookup(mp, tp, pag, agino, agbno, | |
| &chunk_agbno, &offset_agbno, flags); | |
| if (error) | |
| goto out_drop; | |
| goto out_map; | |
| } | |
| /* | |
| * If the inode cluster size is the same as the blocksize or | |
| * smaller we get to the buffer by simple arithmetics. | |
| */ | |
| if (M_IGEO(mp)->blocks_per_cluster == 1) { | |
| offset = XFS_INO_TO_OFFSET(mp, ino); | |
| ASSERT(offset < mp->m_sb.sb_inopblock); | |
| imap->im_blkno = XFS_AGB_TO_DADDR(mp, pag->pag_agno, agbno); | |
| imap->im_len = XFS_FSB_TO_BB(mp, 1); | |
| imap->im_boffset = (unsigned short)(offset << | |
| mp->m_sb.sb_inodelog); | |
| error = 0; | |
| goto out_drop; | |
| } | |
| /* | |
| * If the inode chunks are aligned then use simple maths to | |
| * find the location. Otherwise we have to do a btree | |
| * lookup to find the location. | |
| */ | |
| if (M_IGEO(mp)->inoalign_mask) { | |
| offset_agbno = agbno & M_IGEO(mp)->inoalign_mask; | |
| chunk_agbno = agbno - offset_agbno; | |
| } else { | |
| error = xfs_imap_lookup(mp, tp, pag, agino, agbno, | |
| &chunk_agbno, &offset_agbno, flags); | |
| if (error) | |
| goto out_drop; | |
| } | |
| out_map: | |
| ASSERT(agbno >= chunk_agbno); | |
| cluster_agbno = chunk_agbno + | |
| ((offset_agbno / M_IGEO(mp)->blocks_per_cluster) * | |
| M_IGEO(mp)->blocks_per_cluster); | |
| offset = ((agbno - cluster_agbno) * mp->m_sb.sb_inopblock) + | |
| XFS_INO_TO_OFFSET(mp, ino); | |
| imap->im_blkno = XFS_AGB_TO_DADDR(mp, pag->pag_agno, cluster_agbno); | |
| imap->im_len = XFS_FSB_TO_BB(mp, M_IGEO(mp)->blocks_per_cluster); | |
| imap->im_boffset = (unsigned short)(offset << mp->m_sb.sb_inodelog); | |
| /* | |
| * If the inode number maps to a block outside the bounds | |
| * of the file system then return NULL rather than calling | |
| * read_buf and panicing when we get an error from the | |
| * driver. | |
| */ | |
| if ((imap->im_blkno + imap->im_len) > | |
| XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)) { | |
| xfs_alert(mp, | |
| "%s: (im_blkno (0x%llx) + im_len (0x%llx)) > sb_dblocks (0x%llx)", | |
| __func__, (unsigned long long) imap->im_blkno, | |
| (unsigned long long) imap->im_len, | |
| XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)); | |
| error = -EINVAL; | |
| goto out_drop; | |
| } | |
| error = 0; | |
| out_drop: | |
| if (pag) | |
| xfs_perag_put(pag); | |
| return error; | |
| } | |
| /* | |
| * Log specified fields for the ag hdr (inode section). The growth of the agi | |
| * structure over time requires that we interpret the buffer as two logical | |
| * regions delineated by the end of the unlinked list. This is due to the size | |
| * of the hash table and its location in the middle of the agi. | |
| * | |
| * For example, a request to log a field before agi_unlinked and a field after | |
| * agi_unlinked could cause us to log the entire hash table and use an excessive | |
| * amount of log space. To avoid this behavior, log the region up through | |
| * agi_unlinked in one call and the region after agi_unlinked through the end of | |
| * the structure in another. | |
| */ | |
| void | |
| xfs_ialloc_log_agi( | |
| xfs_trans_t *tp, /* transaction pointer */ | |
| struct xfs_buf *bp, /* allocation group header buffer */ | |
| int fields) /* bitmask of fields to log */ | |
| { | |
| int first; /* first byte number */ | |
| int last; /* last byte number */ | |
| static const short offsets[] = { /* field starting offsets */ | |
| /* keep in sync with bit definitions */ | |
| offsetof(xfs_agi_t, agi_magicnum), | |
| offsetof(xfs_agi_t, agi_versionnum), | |
| offsetof(xfs_agi_t, agi_seqno), | |
| offsetof(xfs_agi_t, agi_length), | |
| offsetof(xfs_agi_t, agi_count), | |
| offsetof(xfs_agi_t, agi_root), | |
| offsetof(xfs_agi_t, agi_level), | |
| offsetof(xfs_agi_t, agi_freecount), | |
| offsetof(xfs_agi_t, agi_newino), | |
| offsetof(xfs_agi_t, agi_dirino), | |
| offsetof(xfs_agi_t, agi_unlinked), | |
| offsetof(xfs_agi_t, agi_free_root), | |
| offsetof(xfs_agi_t, agi_free_level), | |
| offsetof(xfs_agi_t, agi_iblocks), | |
| sizeof(xfs_agi_t) | |
| }; | |
| #ifdef DEBUG | |
| struct xfs_agi *agi = bp->b_addr; | |
| ASSERT(agi->agi_magicnum == cpu_to_be32(XFS_AGI_MAGIC)); | |
| #endif | |
| /* | |
| * Compute byte offsets for the first and last fields in the first | |
| * region and log the agi buffer. This only logs up through | |
| * agi_unlinked. | |
| */ | |
| if (fields & XFS_AGI_ALL_BITS_R1) { | |
| xfs_btree_offsets(fields, offsets, XFS_AGI_NUM_BITS_R1, | |
| &first, &last); | |
| xfs_trans_log_buf(tp, bp, first, last); | |
| } | |
| /* | |
| * Mask off the bits in the first region and calculate the first and | |
| * last field offsets for any bits in the second region. | |
| */ | |
| fields &= ~XFS_AGI_ALL_BITS_R1; | |
| if (fields) { | |
| xfs_btree_offsets(fields, offsets, XFS_AGI_NUM_BITS_R2, | |
| &first, &last); | |
| xfs_trans_log_buf(tp, bp, first, last); | |
| } | |
| } | |
| static xfs_failaddr_t | |
| xfs_agi_verify( | |
| struct xfs_buf *bp) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| struct xfs_agi *agi = bp->b_addr; | |
| int i; | |
| if (xfs_has_crc(mp)) { | |
| if (!uuid_equal(&agi->agi_uuid, &mp->m_sb.sb_meta_uuid)) | |
| return __this_address; | |
| if (!xfs_log_check_lsn(mp, be64_to_cpu(agi->agi_lsn))) | |
| return __this_address; | |
| } | |
| /* | |
| * Validate the magic number of the agi block. | |
| */ | |
| if (!xfs_verify_magic(bp, agi->agi_magicnum)) | |
| return __this_address; | |
| if (!XFS_AGI_GOOD_VERSION(be32_to_cpu(agi->agi_versionnum))) | |
| return __this_address; | |
| if (be32_to_cpu(agi->agi_level) < 1 || | |
| be32_to_cpu(agi->agi_level) > M_IGEO(mp)->inobt_maxlevels) | |
| return __this_address; | |
| if (xfs_has_finobt(mp) && | |
| (be32_to_cpu(agi->agi_free_level) < 1 || | |
| be32_to_cpu(agi->agi_free_level) > M_IGEO(mp)->inobt_maxlevels)) | |
| return __this_address; | |
| /* | |
| * during growfs operations, the perag is not fully initialised, | |
| * so we can't use it for any useful checking. growfs ensures we can't | |
| * use it by using uncached buffers that don't have the perag attached | |
| * so we can detect and avoid this problem. | |
| */ | |
| if (bp->b_pag && be32_to_cpu(agi->agi_seqno) != bp->b_pag->pag_agno) | |
| return __this_address; | |
| for (i = 0; i < XFS_AGI_UNLINKED_BUCKETS; i++) { | |
| if (agi->agi_unlinked[i] == cpu_to_be32(NULLAGINO)) | |
| continue; | |
| if (!xfs_verify_ino(mp, be32_to_cpu(agi->agi_unlinked[i]))) | |
| return __this_address; | |
| } | |
| return NULL; | |
| } | |
| static void | |
| xfs_agi_read_verify( | |
| struct xfs_buf *bp) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| xfs_failaddr_t fa; | |
| if (xfs_has_crc(mp) && | |
| !xfs_buf_verify_cksum(bp, XFS_AGI_CRC_OFF)) | |
| xfs_verifier_error(bp, -EFSBADCRC, __this_address); | |
| else { | |
| fa = xfs_agi_verify(bp); | |
| if (XFS_TEST_ERROR(fa, mp, XFS_ERRTAG_IALLOC_READ_AGI)) | |
| xfs_verifier_error(bp, -EFSCORRUPTED, fa); | |
| } | |
| } | |
| static void | |
| xfs_agi_write_verify( | |
| struct xfs_buf *bp) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| struct xfs_buf_log_item *bip = bp->b_log_item; | |
| struct xfs_agi *agi = bp->b_addr; | |
| xfs_failaddr_t fa; | |
| fa = xfs_agi_verify(bp); | |
| if (fa) { | |
| xfs_verifier_error(bp, -EFSCORRUPTED, fa); | |
| return; | |
| } | |
| if (!xfs_has_crc(mp)) | |
| return; | |
| if (bip) | |
| agi->agi_lsn = cpu_to_be64(bip->bli_item.li_lsn); | |
| xfs_buf_update_cksum(bp, XFS_AGI_CRC_OFF); | |
| } | |
| const struct xfs_buf_ops xfs_agi_buf_ops = { | |
| .name = "xfs_agi", | |
| .magic = { cpu_to_be32(XFS_AGI_MAGIC), cpu_to_be32(XFS_AGI_MAGIC) }, | |
| .verify_read = xfs_agi_read_verify, | |
| .verify_write = xfs_agi_write_verify, | |
| .verify_struct = xfs_agi_verify, | |
| }; | |
| /* | |
| * Read in the allocation group header (inode allocation section) | |
| */ | |
| int | |
| xfs_read_agi( | |
| struct xfs_mount *mp, /* file system mount structure */ | |
| struct xfs_trans *tp, /* transaction pointer */ | |
| xfs_agnumber_t agno, /* allocation group number */ | |
| struct xfs_buf **bpp) /* allocation group hdr buf */ | |
| { | |
| int error; | |
| trace_xfs_read_agi(mp, agno); | |
| ASSERT(agno != NULLAGNUMBER); | |
| error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, | |
| XFS_AG_DADDR(mp, agno, XFS_AGI_DADDR(mp)), | |
| XFS_FSS_TO_BB(mp, 1), 0, bpp, &xfs_agi_buf_ops); | |
| if (error) | |
| return error; | |
| if (tp) | |
| xfs_trans_buf_set_type(tp, *bpp, XFS_BLFT_AGI_BUF); | |
| xfs_buf_set_ref(*bpp, XFS_AGI_REF); | |
| return 0; | |
| } | |
| int | |
| xfs_ialloc_read_agi( | |
| struct xfs_mount *mp, /* file system mount structure */ | |
| struct xfs_trans *tp, /* transaction pointer */ | |
| xfs_agnumber_t agno, /* allocation group number */ | |
| struct xfs_buf **bpp) /* allocation group hdr buf */ | |
| { | |
| struct xfs_agi *agi; /* allocation group header */ | |
| struct xfs_perag *pag; /* per allocation group data */ | |
| int error; | |
| trace_xfs_ialloc_read_agi(mp, agno); | |
| error = xfs_read_agi(mp, tp, agno, bpp); | |
| if (error) | |
| return error; | |
| agi = (*bpp)->b_addr; | |
| pag = (*bpp)->b_pag; | |
| if (!pag->pagi_init) { | |
| pag->pagi_freecount = be32_to_cpu(agi->agi_freecount); | |
| pag->pagi_count = be32_to_cpu(agi->agi_count); | |
| pag->pagi_init = 1; | |
| } | |
| /* | |
| * It's possible for these to be out of sync if | |
| * we are in the middle of a forced shutdown. | |
| */ | |
| ASSERT(pag->pagi_freecount == be32_to_cpu(agi->agi_freecount) || | |
| xfs_is_shutdown(mp)); | |
| return 0; | |
| } | |
| /* | |
| * Read in the agi to initialise the per-ag data in the mount structure | |
| */ | |
| int | |
| xfs_ialloc_pagi_init( | |
| xfs_mount_t *mp, /* file system mount structure */ | |
| xfs_trans_t *tp, /* transaction pointer */ | |
| xfs_agnumber_t agno) /* allocation group number */ | |
| { | |
| struct xfs_buf *bp = NULL; | |
| int error; | |
| error = xfs_ialloc_read_agi(mp, tp, agno, &bp); | |
| if (error) | |
| return error; | |
| if (bp) | |
| xfs_trans_brelse(tp, bp); | |
| return 0; | |
| } | |
| /* Is there an inode record covering a given range of inode numbers? */ | |
| int | |
| xfs_ialloc_has_inode_record( | |
| struct xfs_btree_cur *cur, | |
| xfs_agino_t low, | |
| xfs_agino_t high, | |
| bool *exists) | |
| { | |
| struct xfs_inobt_rec_incore irec; | |
| xfs_agino_t agino; | |
| uint16_t holemask; | |
| int has_record; | |
| int i; | |
| int error; | |
| *exists = false; | |
| error = xfs_inobt_lookup(cur, low, XFS_LOOKUP_LE, &has_record); | |
| while (error == 0 && has_record) { | |
| error = xfs_inobt_get_rec(cur, &irec, &has_record); | |
| if (error || irec.ir_startino > high) | |
| break; | |
| agino = irec.ir_startino; | |
| holemask = irec.ir_holemask; | |
| for (i = 0; i < XFS_INOBT_HOLEMASK_BITS; holemask >>= 1, | |
| i++, agino += XFS_INODES_PER_HOLEMASK_BIT) { | |
| if (holemask & 1) | |
| continue; | |
| if (agino + XFS_INODES_PER_HOLEMASK_BIT > low && | |
| agino <= high) { | |
| *exists = true; | |
| return 0; | |
| } | |
| } | |
| error = xfs_btree_increment(cur, 0, &has_record); | |
| } | |
| return error; | |
| } | |
| /* Is there an inode record covering a given extent? */ | |
| int | |
| xfs_ialloc_has_inodes_at_extent( | |
| struct xfs_btree_cur *cur, | |
| xfs_agblock_t bno, | |
| xfs_extlen_t len, | |
| bool *exists) | |
| { | |
| xfs_agino_t low; | |
| xfs_agino_t high; | |
| low = XFS_AGB_TO_AGINO(cur->bc_mp, bno); | |
| high = XFS_AGB_TO_AGINO(cur->bc_mp, bno + len) - 1; | |
| return xfs_ialloc_has_inode_record(cur, low, high, exists); | |
| } | |
| struct xfs_ialloc_count_inodes { | |
| xfs_agino_t count; | |
| xfs_agino_t freecount; | |
| }; | |
| /* Record inode counts across all inobt records. */ | |
| STATIC int | |
| xfs_ialloc_count_inodes_rec( | |
| struct xfs_btree_cur *cur, | |
| const union xfs_btree_rec *rec, | |
| void *priv) | |
| { | |
| struct xfs_inobt_rec_incore irec; | |
| struct xfs_ialloc_count_inodes *ci = priv; | |
| xfs_inobt_btrec_to_irec(cur->bc_mp, rec, &irec); | |
| ci->count += irec.ir_count; | |
| ci->freecount += irec.ir_freecount; | |
| return 0; | |
| } | |
| /* Count allocated and free inodes under an inobt. */ | |
| int | |
| xfs_ialloc_count_inodes( | |
| struct xfs_btree_cur *cur, | |
| xfs_agino_t *count, | |
| xfs_agino_t *freecount) | |
| { | |
| struct xfs_ialloc_count_inodes ci = {0}; | |
| int error; | |
| ASSERT(cur->bc_btnum == XFS_BTNUM_INO); | |
| error = xfs_btree_query_all(cur, xfs_ialloc_count_inodes_rec, &ci); | |
| if (error) | |
| return error; | |
| *count = ci.count; | |
| *freecount = ci.freecount; | |
| return 0; | |
| } | |
| /* | |
| * Initialize inode-related geometry information. | |
| * | |
| * Compute the inode btree min and max levels and set maxicount. | |
| * | |
| * Set the inode cluster size. This may still be overridden by the file | |
| * system block size if it is larger than the chosen cluster size. | |
| * | |
| * For v5 filesystems, scale the cluster size with the inode size to keep a | |
| * constant ratio of inode per cluster buffer, but only if mkfs has set the | |
| * inode alignment value appropriately for larger cluster sizes. | |
| * | |
| * Then compute the inode cluster alignment information. | |
| */ | |
| void | |
| xfs_ialloc_setup_geometry( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_sb *sbp = &mp->m_sb; | |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); | |
| uint64_t icount; | |
| uint inodes; | |
| igeo->new_diflags2 = 0; | |
| if (xfs_has_bigtime(mp)) | |
| igeo->new_diflags2 |= XFS_DIFLAG2_BIGTIME; | |
| /* Compute inode btree geometry. */ | |
| igeo->agino_log = sbp->sb_inopblog + sbp->sb_agblklog; | |
| igeo->inobt_mxr[0] = xfs_inobt_maxrecs(mp, sbp->sb_blocksize, 1); | |
| igeo->inobt_mxr[1] = xfs_inobt_maxrecs(mp, sbp->sb_blocksize, 0); | |
| igeo->inobt_mnr[0] = igeo->inobt_mxr[0] / 2; | |
| igeo->inobt_mnr[1] = igeo->inobt_mxr[1] / 2; | |
| igeo->ialloc_inos = max_t(uint16_t, XFS_INODES_PER_CHUNK, | |
| sbp->sb_inopblock); | |
| igeo->ialloc_blks = igeo->ialloc_inos >> sbp->sb_inopblog; | |
| if (sbp->sb_spino_align) | |
| igeo->ialloc_min_blks = sbp->sb_spino_align; | |
| else | |
| igeo->ialloc_min_blks = igeo->ialloc_blks; | |
| /* Compute and fill in value of m_ino_geo.inobt_maxlevels. */ | |
| inodes = (1LL << XFS_INO_AGINO_BITS(mp)) >> XFS_INODES_PER_CHUNK_LOG; | |
| igeo->inobt_maxlevels = xfs_btree_compute_maxlevels(igeo->inobt_mnr, | |
| inodes); | |
| ASSERT(igeo->inobt_maxlevels <= xfs_iallocbt_maxlevels_ondisk()); | |
| /* | |
| * Set the maximum inode count for this filesystem, being careful not | |
| * to use obviously garbage sb_inopblog/sb_inopblock values. Regular | |
| * users should never get here due to failing sb verification, but | |
| * certain users (xfs_db) need to be usable even with corrupt metadata. | |
| */ | |
| if (sbp->sb_imax_pct && igeo->ialloc_blks) { | |
| /* | |
| * Make sure the maximum inode count is a multiple | |
| * of the units we allocate inodes in. | |
| */ | |
| icount = sbp->sb_dblocks * sbp->sb_imax_pct; | |
| do_div(icount, 100); | |
| do_div(icount, igeo->ialloc_blks); | |
| igeo->maxicount = XFS_FSB_TO_INO(mp, | |
| icount * igeo->ialloc_blks); | |
| } else { | |
| igeo->maxicount = 0; | |
| } | |
| /* | |
| * Compute the desired size of an inode cluster buffer size, which | |
| * starts at 8K and (on v5 filesystems) scales up with larger inode | |
| * sizes. | |
| * | |
| * Preserve the desired inode cluster size because the sparse inodes | |
| * feature uses that desired size (not the actual size) to compute the | |
| * sparse inode alignment. The mount code validates this value, so we | |
| * cannot change the behavior. | |
| */ | |
| igeo->inode_cluster_size_raw = XFS_INODE_BIG_CLUSTER_SIZE; | |
| if (xfs_has_v3inodes(mp)) { | |
| int new_size = igeo->inode_cluster_size_raw; | |
| new_size *= mp->m_sb.sb_inodesize / XFS_DINODE_MIN_SIZE; | |
| if (mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(mp, new_size)) | |
| igeo->inode_cluster_size_raw = new_size; | |
| } | |
| /* Calculate inode cluster ratios. */ | |
| if (igeo->inode_cluster_size_raw > mp->m_sb.sb_blocksize) | |
| igeo->blocks_per_cluster = XFS_B_TO_FSBT(mp, | |
| igeo->inode_cluster_size_raw); | |
| else | |
| igeo->blocks_per_cluster = 1; | |
| igeo->inode_cluster_size = XFS_FSB_TO_B(mp, igeo->blocks_per_cluster); | |
| igeo->inodes_per_cluster = XFS_FSB_TO_INO(mp, igeo->blocks_per_cluster); | |
| /* Calculate inode cluster alignment. */ | |
| if (xfs_has_align(mp) && | |
| mp->m_sb.sb_inoalignmt >= igeo->blocks_per_cluster) | |
| igeo->cluster_align = mp->m_sb.sb_inoalignmt; | |
| else | |
| igeo->cluster_align = 1; | |
| igeo->inoalign_mask = igeo->cluster_align - 1; | |
| igeo->cluster_align_inodes = XFS_FSB_TO_INO(mp, igeo->cluster_align); | |
| /* | |
| * If we are using stripe alignment, check whether | |
| * the stripe unit is a multiple of the inode alignment | |
| */ | |
| if (mp->m_dalign && igeo->inoalign_mask && | |
| !(mp->m_dalign & igeo->inoalign_mask)) | |
| igeo->ialloc_align = mp->m_dalign; | |
| else | |
| igeo->ialloc_align = 0; | |
| } | |
| /* Compute the location of the root directory inode that is laid out by mkfs. */ | |
| xfs_ino_t | |
| xfs_ialloc_calc_rootino( | |
| struct xfs_mount *mp, | |
| int sunit) | |
| { | |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); | |
| xfs_agblock_t first_bno; | |
| /* | |
| * Pre-calculate the geometry of AG 0. We know what it looks like | |
| * because libxfs knows how to create allocation groups now. | |
| * | |
| * first_bno is the first block in which mkfs could possibly have | |
| * allocated the root directory inode, once we factor in the metadata | |
| * that mkfs formats before it. Namely, the four AG headers... | |
| */ | |
| first_bno = howmany(4 * mp->m_sb.sb_sectsize, mp->m_sb.sb_blocksize); | |
| /* ...the two free space btree roots... */ | |
| first_bno += 2; | |
| /* ...the inode btree root... */ | |
| first_bno += 1; | |
| /* ...the initial AGFL... */ | |
| first_bno += xfs_alloc_min_freelist(mp, NULL); | |
| /* ...the free inode btree root... */ | |
| if (xfs_has_finobt(mp)) | |
| first_bno++; | |
| /* ...the reverse mapping btree root... */ | |
| if (xfs_has_rmapbt(mp)) | |
| first_bno++; | |
| /* ...the reference count btree... */ | |
| if (xfs_has_reflink(mp)) | |
| first_bno++; | |
| /* | |
| * ...and the log, if it is allocated in the first allocation group. | |
| * | |
| * This can happen with filesystems that only have a single | |
| * allocation group, or very odd geometries created by old mkfs | |
| * versions on very small filesystems. | |
| */ | |
| if (mp->m_sb.sb_logstart && | |
| XFS_FSB_TO_AGNO(mp, mp->m_sb.sb_logstart) == 0) | |
| first_bno += mp->m_sb.sb_logblocks; | |
| /* | |
| * Now round first_bno up to whatever allocation alignment is given | |
| * by the filesystem or was passed in. | |
| */ | |
| if (xfs_has_dalign(mp) && igeo->ialloc_align > 0) | |
| first_bno = roundup(first_bno, sunit); | |
| else if (xfs_has_align(mp) && | |
| mp->m_sb.sb_inoalignmt > 1) | |
| first_bno = roundup(first_bno, mp->m_sb.sb_inoalignmt); | |
| return XFS_AGINO_TO_INO(mp, 0, XFS_AGB_TO_AGINO(mp, first_bno)); | |
| } | |
| /* | |
| * Ensure there are not sparse inode clusters that cross the new EOAG. | |
| * | |
| * This is a no-op for non-spinode filesystems since clusters are always fully | |
| * allocated and checking the bnobt suffices. However, a spinode filesystem | |
| * could have a record where the upper inodes are free blocks. If those blocks | |
| * were removed from the filesystem, the inode record would extend beyond EOAG, | |
| * which will be flagged as corruption. | |
| */ | |
| int | |
| xfs_ialloc_check_shrink( | |
| struct xfs_trans *tp, | |
| xfs_agnumber_t agno, | |
| struct xfs_buf *agibp, | |
| xfs_agblock_t new_length) | |
| { | |
| struct xfs_inobt_rec_incore rec; | |
| struct xfs_btree_cur *cur; | |
| struct xfs_mount *mp = tp->t_mountp; | |
| struct xfs_perag *pag; | |
| xfs_agino_t agino = XFS_AGB_TO_AGINO(mp, new_length); | |
| int has; | |
| int error; | |
| if (!xfs_has_sparseinodes(mp)) | |
| return 0; | |
| pag = xfs_perag_get(mp, agno); | |
| cur = xfs_inobt_init_cursor(mp, tp, agibp, pag, XFS_BTNUM_INO); | |
| /* Look up the inobt record that would correspond to the new EOFS. */ | |
| error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &has); | |
| if (error || !has) | |
| goto out; | |
| error = xfs_inobt_get_rec(cur, &rec, &has); | |
| if (error) | |
| goto out; | |
| if (!has) { | |
| error = -EFSCORRUPTED; | |
| goto out; | |
| } | |
| /* If the record covers inodes that would be beyond EOFS, bail out. */ | |
| if (rec.ir_startino + XFS_INODES_PER_CHUNK > agino) { | |
| error = -ENOSPC; | |
| goto out; | |
| } | |
| out: | |
| xfs_btree_del_cursor(cur, error); | |
| xfs_perag_put(pag); | |
| return error; | |
| } |