| /* SPDX-License-Identifier: MIT */ | |
| /* | |
| * Copyright © 2019 Intel Corporation | |
| */ | |
| #ifndef __INTEL_RUNTIME_PM_H__ | |
| #define __INTEL_RUNTIME_PM_H__ | |
| #include <linux/types.h> | |
| #include "intel_wakeref.h" | |
| #include "i915_utils.h" | |
| struct device; | |
| struct drm_i915_private; | |
| struct drm_printer; | |
| enum i915_drm_suspend_mode { | |
| I915_DRM_SUSPEND_IDLE, | |
| I915_DRM_SUSPEND_MEM, | |
| I915_DRM_SUSPEND_HIBERNATE, | |
| }; | |
| /* | |
| * This struct helps tracking the state needed for runtime PM, which puts the | |
| * device in PCI D3 state. Notice that when this happens, nothing on the | |
| * graphics device works, even register access, so we don't get interrupts nor | |
| * anything else. | |
| * | |
| * Every piece of our code that needs to actually touch the hardware needs to | |
| * either call intel_runtime_pm_get or call intel_display_power_get with the | |
| * appropriate power domain. | |
| * | |
| * Our driver uses the autosuspend delay feature, which means we'll only really | |
| * suspend if we stay with zero refcount for a certain amount of time. The | |
| * default value is currently very conservative (see intel_runtime_pm_enable), but | |
| * it can be changed with the standard runtime PM files from sysfs. | |
| * | |
| * The irqs_disabled variable becomes true exactly after we disable the IRQs and | |
| * goes back to false exactly before we reenable the IRQs. We use this variable | |
| * to check if someone is trying to enable/disable IRQs while they're supposed | |
| * to be disabled. This shouldn't happen and we'll print some error messages in | |
| * case it happens. | |
| * | |
| * For more, read the Documentation/power/runtime_pm.rst. | |
| */ | |
| struct intel_runtime_pm { | |
| atomic_t wakeref_count; | |
| struct device *kdev; /* points to i915->drm.dev */ | |
| bool available; | |
| bool suspended; | |
| bool irqs_enabled; | |
| bool no_wakeref_tracking; | |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) | |
| /* | |
| * To aide detection of wakeref leaks and general misuse, we | |
| * track all wakeref holders. With manual markup (i.e. returning | |
| * a cookie to each rpm_get caller which they then supply to their | |
| * paired rpm_put) we can remove corresponding pairs of and keep | |
| * the array trimmed to active wakerefs. | |
| */ | |
| struct intel_runtime_pm_debug { | |
| spinlock_t lock; | |
| depot_stack_handle_t last_acquire; | |
| depot_stack_handle_t last_release; | |
| depot_stack_handle_t *owners; | |
| unsigned long count; | |
| } debug; | |
| #endif | |
| }; | |
| #define BITS_PER_WAKEREF \ | |
| BITS_PER_TYPE(struct_member(struct intel_runtime_pm, wakeref_count)) | |
| #define INTEL_RPM_WAKELOCK_SHIFT (BITS_PER_WAKEREF / 2) | |
| #define INTEL_RPM_WAKELOCK_BIAS (1 << INTEL_RPM_WAKELOCK_SHIFT) | |
| #define INTEL_RPM_RAW_WAKEREF_MASK (INTEL_RPM_WAKELOCK_BIAS - 1) | |
| static inline int | |
| intel_rpm_raw_wakeref_count(int wakeref_count) | |
| { | |
| return wakeref_count & INTEL_RPM_RAW_WAKEREF_MASK; | |
| } | |
| static inline int | |
| intel_rpm_wakelock_count(int wakeref_count) | |
| { | |
| return wakeref_count >> INTEL_RPM_WAKELOCK_SHIFT; | |
| } | |
| static inline void | |
| assert_rpm_device_not_suspended(struct intel_runtime_pm *rpm) | |
| { | |
| WARN_ONCE(rpm->suspended, | |
| "Device suspended during HW access\n"); | |
| } | |
| static inline void | |
| __assert_rpm_raw_wakeref_held(struct intel_runtime_pm *rpm, int wakeref_count) | |
| { | |
| assert_rpm_device_not_suspended(rpm); | |
| WARN_ONCE(!intel_rpm_raw_wakeref_count(wakeref_count), | |
| "RPM raw-wakeref not held\n"); | |
| } | |
| static inline void | |
| __assert_rpm_wakelock_held(struct intel_runtime_pm *rpm, int wakeref_count) | |
| { | |
| __assert_rpm_raw_wakeref_held(rpm, wakeref_count); | |
| WARN_ONCE(!intel_rpm_wakelock_count(wakeref_count), | |
| "RPM wakelock ref not held during HW access\n"); | |
| } | |
| static inline void | |
| assert_rpm_raw_wakeref_held(struct intel_runtime_pm *rpm) | |
| { | |
| __assert_rpm_raw_wakeref_held(rpm, atomic_read(&rpm->wakeref_count)); | |
| } | |
| static inline void | |
| assert_rpm_wakelock_held(struct intel_runtime_pm *rpm) | |
| { | |
| __assert_rpm_wakelock_held(rpm, atomic_read(&rpm->wakeref_count)); | |
| } | |
| /** | |
| * disable_rpm_wakeref_asserts - disable the RPM assert checks | |
| * @rpm: the intel_runtime_pm structure | |
| * | |
| * This function disable asserts that check if we hold an RPM wakelock | |
| * reference, while keeping the device-not-suspended checks still enabled. | |
| * It's meant to be used only in special circumstances where our rule about | |
| * the wakelock refcount wrt. the device power state doesn't hold. According | |
| * to this rule at any point where we access the HW or want to keep the HW in | |
| * an active state we must hold an RPM wakelock reference acquired via one of | |
| * the intel_runtime_pm_get() helpers. Currently there are a few special spots | |
| * where this rule doesn't hold: the IRQ and suspend/resume handlers, the | |
| * forcewake release timer, and the GPU RPS and hangcheck works. All other | |
| * users should avoid using this function. | |
| * | |
| * Any calls to this function must have a symmetric call to | |
| * enable_rpm_wakeref_asserts(). | |
| */ | |
| static inline void | |
| disable_rpm_wakeref_asserts(struct intel_runtime_pm *rpm) | |
| { | |
| atomic_add(INTEL_RPM_WAKELOCK_BIAS + 1, | |
| &rpm->wakeref_count); | |
| } | |
| /** | |
| * enable_rpm_wakeref_asserts - re-enable the RPM assert checks | |
| * @rpm: the intel_runtime_pm structure | |
| * | |
| * This function re-enables the RPM assert checks after disabling them with | |
| * disable_rpm_wakeref_asserts. It's meant to be used only in special | |
| * circumstances otherwise its use should be avoided. | |
| * | |
| * Any calls to this function must have a symmetric call to | |
| * disable_rpm_wakeref_asserts(). | |
| */ | |
| static inline void | |
| enable_rpm_wakeref_asserts(struct intel_runtime_pm *rpm) | |
| { | |
| atomic_sub(INTEL_RPM_WAKELOCK_BIAS + 1, | |
| &rpm->wakeref_count); | |
| } | |
| void intel_runtime_pm_init_early(struct intel_runtime_pm *rpm); | |
| void intel_runtime_pm_enable(struct intel_runtime_pm *rpm); | |
| void intel_runtime_pm_disable(struct intel_runtime_pm *rpm); | |
| void intel_runtime_pm_driver_release(struct intel_runtime_pm *rpm); | |
| intel_wakeref_t intel_runtime_pm_get(struct intel_runtime_pm *rpm); | |
| intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm); | |
| intel_wakeref_t intel_runtime_pm_get_if_active(struct intel_runtime_pm *rpm); | |
| intel_wakeref_t intel_runtime_pm_get_noresume(struct intel_runtime_pm *rpm); | |
| intel_wakeref_t intel_runtime_pm_get_raw(struct intel_runtime_pm *rpm); | |
| #define with_intel_runtime_pm(rpm, wf) \ | |
| for ((wf) = intel_runtime_pm_get(rpm); (wf); \ | |
| intel_runtime_pm_put((rpm), (wf)), (wf) = 0) | |
| #define with_intel_runtime_pm_if_in_use(rpm, wf) \ | |
| for ((wf) = intel_runtime_pm_get_if_in_use(rpm); (wf); \ | |
| intel_runtime_pm_put((rpm), (wf)), (wf) = 0) | |
| #define with_intel_runtime_pm_if_active(rpm, wf) \ | |
| for ((wf) = intel_runtime_pm_get_if_active(rpm); (wf); \ | |
| intel_runtime_pm_put((rpm), (wf)), (wf) = 0) | |
| void intel_runtime_pm_put_unchecked(struct intel_runtime_pm *rpm); | |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) | |
| void intel_runtime_pm_put(struct intel_runtime_pm *rpm, intel_wakeref_t wref); | |
| #else | |
| static inline void | |
| intel_runtime_pm_put(struct intel_runtime_pm *rpm, intel_wakeref_t wref) | |
| { | |
| intel_runtime_pm_put_unchecked(rpm); | |
| } | |
| #endif | |
| void intel_runtime_pm_put_raw(struct intel_runtime_pm *rpm, intel_wakeref_t wref); | |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) | |
| void print_intel_runtime_pm_wakeref(struct intel_runtime_pm *rpm, | |
| struct drm_printer *p); | |
| #else | |
| static inline void print_intel_runtime_pm_wakeref(struct intel_runtime_pm *rpm, | |
| struct drm_printer *p) | |
| { | |
| } | |
| #endif | |
| #endif /* __INTEL_RUNTIME_PM_H__ */ |