| // SPDX-License-Identifier: GPL-1.0+ | |
| /* | |
| * zcore module to export memory content and register sets for creating system | |
| * dumps on SCSI/NVMe disks (zfcp/nvme dump). | |
| * | |
| * For more information please refer to Documentation/s390/zfcpdump.rst | |
| * | |
| * Copyright IBM Corp. 2003, 2008 | |
| * Author(s): Michael Holzheu | |
| */ | |
| #define KMSG_COMPONENT "zdump" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/panic_notifier.h> | |
| #include <linux/reboot.h> | |
| #include <asm/asm-offsets.h> | |
| #include <asm/ipl.h> | |
| #include <asm/sclp.h> | |
| #include <asm/setup.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/debug.h> | |
| #include <asm/processor.h> | |
| #include <asm/irqflags.h> | |
| #include <asm/checksum.h> | |
| #include <asm/os_info.h> | |
| #include <asm/switch_to.h> | |
| #include "sclp.h" | |
| #define TRACE(x...) debug_sprintf_event(zcore_dbf, 1, x) | |
| enum arch_id { | |
| ARCH_S390 = 0, | |
| ARCH_S390X = 1, | |
| }; | |
| struct ipib_info { | |
| unsigned long ipib; | |
| u32 checksum; | |
| } __attribute__((packed)); | |
| static struct debug_info *zcore_dbf; | |
| static int hsa_available; | |
| static struct dentry *zcore_dir; | |
| static struct dentry *zcore_reipl_file; | |
| static struct dentry *zcore_hsa_file; | |
| static struct ipl_parameter_block *zcore_ipl_block; | |
| static char hsa_buf[PAGE_SIZE] __aligned(PAGE_SIZE); | |
| /* | |
| * Copy memory from HSA to user memory (not reentrant): | |
| * | |
| * @dest: User buffer where memory should be copied to | |
| * @src: Start address within HSA where data should be copied | |
| * @count: Size of buffer, which should be copied | |
| */ | |
| int memcpy_hsa_user(void __user *dest, unsigned long src, size_t count) | |
| { | |
| unsigned long offset, bytes; | |
| if (!hsa_available) | |
| return -ENODATA; | |
| while (count) { | |
| if (sclp_sdias_copy(hsa_buf, src / PAGE_SIZE + 2, 1)) { | |
| TRACE("sclp_sdias_copy() failed\n"); | |
| return -EIO; | |
| } | |
| offset = src % PAGE_SIZE; | |
| bytes = min(PAGE_SIZE - offset, count); | |
| if (copy_to_user(dest, hsa_buf + offset, bytes)) | |
| return -EFAULT; | |
| src += bytes; | |
| dest += bytes; | |
| count -= bytes; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Copy memory from HSA to kernel memory (not reentrant): | |
| * | |
| * @dest: Kernel or user buffer where memory should be copied to | |
| * @src: Start address within HSA where data should be copied | |
| * @count: Size of buffer, which should be copied | |
| */ | |
| int memcpy_hsa_kernel(void *dest, unsigned long src, size_t count) | |
| { | |
| unsigned long offset, bytes; | |
| if (!hsa_available) | |
| return -ENODATA; | |
| while (count) { | |
| if (sclp_sdias_copy(hsa_buf, src / PAGE_SIZE + 2, 1)) { | |
| TRACE("sclp_sdias_copy() failed\n"); | |
| return -EIO; | |
| } | |
| offset = src % PAGE_SIZE; | |
| bytes = min(PAGE_SIZE - offset, count); | |
| memcpy(dest, hsa_buf + offset, bytes); | |
| src += bytes; | |
| dest += bytes; | |
| count -= bytes; | |
| } | |
| return 0; | |
| } | |
| static int __init init_cpu_info(void) | |
| { | |
| struct save_area *sa; | |
| /* get info for boot cpu from lowcore, stored in the HSA */ | |
| sa = save_area_boot_cpu(); | |
| if (!sa) | |
| return -ENOMEM; | |
| if (memcpy_hsa_kernel(hsa_buf, __LC_FPREGS_SAVE_AREA, 512) < 0) { | |
| TRACE("could not copy from HSA\n"); | |
| return -EIO; | |
| } | |
| save_area_add_regs(sa, hsa_buf); /* vx registers are saved in smp.c */ | |
| return 0; | |
| } | |
| /* | |
| * Release the HSA | |
| */ | |
| static void release_hsa(void) | |
| { | |
| diag308(DIAG308_REL_HSA, NULL); | |
| hsa_available = 0; | |
| } | |
| static ssize_t zcore_reipl_write(struct file *filp, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| if (zcore_ipl_block) { | |
| diag308(DIAG308_SET, zcore_ipl_block); | |
| diag308(DIAG308_LOAD_CLEAR, NULL); | |
| } | |
| return count; | |
| } | |
| static int zcore_reipl_open(struct inode *inode, struct file *filp) | |
| { | |
| return stream_open(inode, filp); | |
| } | |
| static int zcore_reipl_release(struct inode *inode, struct file *filp) | |
| { | |
| return 0; | |
| } | |
| static const struct file_operations zcore_reipl_fops = { | |
| .owner = THIS_MODULE, | |
| .write = zcore_reipl_write, | |
| .open = zcore_reipl_open, | |
| .release = zcore_reipl_release, | |
| .llseek = no_llseek, | |
| }; | |
| static ssize_t zcore_hsa_read(struct file *filp, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| static char str[18]; | |
| if (hsa_available) | |
| snprintf(str, sizeof(str), "%lx\n", sclp.hsa_size); | |
| else | |
| snprintf(str, sizeof(str), "0\n"); | |
| return simple_read_from_buffer(buf, count, ppos, str, strlen(str)); | |
| } | |
| static ssize_t zcore_hsa_write(struct file *filp, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| char value; | |
| if (*ppos != 0) | |
| return -EPIPE; | |
| if (copy_from_user(&value, buf, 1)) | |
| return -EFAULT; | |
| if (value != '0') | |
| return -EINVAL; | |
| release_hsa(); | |
| return count; | |
| } | |
| static const struct file_operations zcore_hsa_fops = { | |
| .owner = THIS_MODULE, | |
| .write = zcore_hsa_write, | |
| .read = zcore_hsa_read, | |
| .open = nonseekable_open, | |
| .llseek = no_llseek, | |
| }; | |
| static int __init check_sdias(void) | |
| { | |
| if (!sclp.hsa_size) { | |
| TRACE("Could not determine HSA size\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Provide IPL parameter information block from either HSA or memory | |
| * for future reipl | |
| */ | |
| static int __init zcore_reipl_init(void) | |
| { | |
| struct ipib_info ipib_info; | |
| int rc; | |
| rc = memcpy_hsa_kernel(&ipib_info, __LC_DUMP_REIPL, sizeof(ipib_info)); | |
| if (rc) | |
| return rc; | |
| if (ipib_info.ipib == 0) | |
| return 0; | |
| zcore_ipl_block = (void *) __get_free_page(GFP_KERNEL); | |
| if (!zcore_ipl_block) | |
| return -ENOMEM; | |
| if (ipib_info.ipib < sclp.hsa_size) | |
| rc = memcpy_hsa_kernel(zcore_ipl_block, ipib_info.ipib, | |
| PAGE_SIZE); | |
| else | |
| rc = memcpy_real(zcore_ipl_block, ipib_info.ipib, PAGE_SIZE); | |
| if (rc || (__force u32)csum_partial(zcore_ipl_block, zcore_ipl_block->hdr.len, 0) != | |
| ipib_info.checksum) { | |
| TRACE("Checksum does not match\n"); | |
| free_page((unsigned long) zcore_ipl_block); | |
| zcore_ipl_block = NULL; | |
| } | |
| return 0; | |
| } | |
| static int zcore_reboot_and_on_panic_handler(struct notifier_block *self, | |
| unsigned long event, | |
| void *data) | |
| { | |
| if (hsa_available) | |
| release_hsa(); | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block zcore_reboot_notifier = { | |
| .notifier_call = zcore_reboot_and_on_panic_handler, | |
| /* we need to be notified before reipl and kdump */ | |
| .priority = INT_MAX, | |
| }; | |
| static struct notifier_block zcore_on_panic_notifier = { | |
| .notifier_call = zcore_reboot_and_on_panic_handler, | |
| /* we need to be notified before reipl and kdump */ | |
| .priority = INT_MAX, | |
| }; | |
| static int __init zcore_init(void) | |
| { | |
| unsigned char arch; | |
| int rc; | |
| if (!is_ipl_type_dump()) | |
| return -ENODATA; | |
| if (oldmem_data.start) | |
| return -ENODATA; | |
| zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long)); | |
| debug_register_view(zcore_dbf, &debug_sprintf_view); | |
| debug_set_level(zcore_dbf, 6); | |
| if (ipl_info.type == IPL_TYPE_FCP_DUMP) { | |
| TRACE("type: fcp\n"); | |
| TRACE("devno: %x\n", ipl_info.data.fcp.dev_id.devno); | |
| TRACE("wwpn: %llx\n", (unsigned long long) ipl_info.data.fcp.wwpn); | |
| TRACE("lun: %llx\n", (unsigned long long) ipl_info.data.fcp.lun); | |
| } else if (ipl_info.type == IPL_TYPE_NVME_DUMP) { | |
| TRACE("type: nvme\n"); | |
| TRACE("fid: %x\n", ipl_info.data.nvme.fid); | |
| TRACE("nsid: %x\n", ipl_info.data.nvme.nsid); | |
| } | |
| rc = sclp_sdias_init(); | |
| if (rc) | |
| goto fail; | |
| rc = check_sdias(); | |
| if (rc) | |
| goto fail; | |
| hsa_available = 1; | |
| rc = memcpy_hsa_kernel(&arch, __LC_AR_MODE_ID, 1); | |
| if (rc) | |
| goto fail; | |
| if (arch == ARCH_S390) { | |
| pr_alert("The 64-bit dump tool cannot be used for a " | |
| "32-bit system\n"); | |
| rc = -EINVAL; | |
| goto fail; | |
| } | |
| pr_alert("The dump process started for a 64-bit operating system\n"); | |
| rc = init_cpu_info(); | |
| if (rc) | |
| goto fail; | |
| rc = zcore_reipl_init(); | |
| if (rc) | |
| goto fail; | |
| zcore_dir = debugfs_create_dir("zcore" , NULL); | |
| zcore_reipl_file = debugfs_create_file("reipl", S_IRUSR, zcore_dir, | |
| NULL, &zcore_reipl_fops); | |
| zcore_hsa_file = debugfs_create_file("hsa", S_IRUSR|S_IWUSR, zcore_dir, | |
| NULL, &zcore_hsa_fops); | |
| register_reboot_notifier(&zcore_reboot_notifier); | |
| atomic_notifier_chain_register(&panic_notifier_list, &zcore_on_panic_notifier); | |
| return 0; | |
| fail: | |
| diag308(DIAG308_REL_HSA, NULL); | |
| return rc; | |
| } | |
| subsys_initcall(zcore_init); |