| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) | |
| // | |
| // Copyright 2020 NXP | |
| // | |
| // Common helpers for the audio DSP on i.MX8 | |
| #include <linux/module.h> | |
| #include <sound/sof/xtensa.h> | |
| #include "../ops.h" | |
| #include "imx-common.h" | |
| /** | |
| * imx8_get_registers() - This function is called in case of DSP oops | |
| * in order to gather information about the registers, filename and | |
| * linenumber and stack. | |
| * @sdev: SOF device | |
| * @xoops: Stores information about registers. | |
| * @panic_info: Stores information about filename and line number. | |
| * @stack: Stores the stack dump. | |
| * @stack_words: Size of the stack dump. | |
| */ | |
| void imx8_get_registers(struct snd_sof_dev *sdev, | |
| struct sof_ipc_dsp_oops_xtensa *xoops, | |
| struct sof_ipc_panic_info *panic_info, | |
| u32 *stack, size_t stack_words) | |
| { | |
| u32 offset = sdev->dsp_oops_offset; | |
| /* first read registers */ | |
| sof_mailbox_read(sdev, offset, xoops, sizeof(*xoops)); | |
| /* then get panic info */ | |
| if (xoops->arch_hdr.totalsize > EXCEPT_MAX_HDR_SIZE) { | |
| dev_err(sdev->dev, "invalid header size 0x%x. FW oops is bogus\n", | |
| xoops->arch_hdr.totalsize); | |
| return; | |
| } | |
| offset += xoops->arch_hdr.totalsize; | |
| sof_mailbox_read(sdev, offset, panic_info, sizeof(*panic_info)); | |
| /* then get the stack */ | |
| offset += sizeof(*panic_info); | |
| sof_mailbox_read(sdev, offset, stack, stack_words * sizeof(u32)); | |
| } | |
| /** | |
| * imx8_dump() - This function is called when a panic message is | |
| * received from the firmware. | |
| * @sdev: SOF device | |
| * @flags: parameter not used but required by ops prototype | |
| */ | |
| void imx8_dump(struct snd_sof_dev *sdev, u32 flags) | |
| { | |
| struct sof_ipc_dsp_oops_xtensa xoops; | |
| struct sof_ipc_panic_info panic_info; | |
| u32 stack[IMX8_STACK_DUMP_SIZE]; | |
| u32 status; | |
| /* Get information about the panic status from the debug box area. | |
| * Compute the trace point based on the status. | |
| */ | |
| sof_mailbox_read(sdev, sdev->debug_box.offset + 0x4, &status, 4); | |
| /* Get information about the registers, the filename and line | |
| * number and the stack. | |
| */ | |
| imx8_get_registers(sdev, &xoops, &panic_info, stack, | |
| IMX8_STACK_DUMP_SIZE); | |
| /* Print the information to the console */ | |
| sof_print_oops_and_stack(sdev, KERN_ERR, status, status, &xoops, | |
| &panic_info, stack, IMX8_STACK_DUMP_SIZE); | |
| } | |
| EXPORT_SYMBOL(imx8_dump); | |
| int imx8_parse_clocks(struct snd_sof_dev *sdev, struct imx_clocks *clks) | |
| { | |
| int ret; | |
| ret = devm_clk_bulk_get(sdev->dev, clks->num_dsp_clks, clks->dsp_clks); | |
| if (ret) | |
| dev_err(sdev->dev, "Failed to request DSP clocks\n"); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(imx8_parse_clocks); | |
| int imx8_enable_clocks(struct snd_sof_dev *sdev, struct imx_clocks *clks) | |
| { | |
| return clk_bulk_prepare_enable(clks->num_dsp_clks, clks->dsp_clks); | |
| } | |
| EXPORT_SYMBOL(imx8_enable_clocks); | |
| void imx8_disable_clocks(struct snd_sof_dev *sdev, struct imx_clocks *clks) | |
| { | |
| clk_bulk_disable_unprepare(clks->num_dsp_clks, clks->dsp_clks); | |
| } | |
| EXPORT_SYMBOL(imx8_disable_clocks); | |
| MODULE_LICENSE("Dual BSD/GPL"); |