| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/lib/uaccess_with_memcpy.c |
| * |
| * Written by: Lennert Buytenhek and Nicolas Pitre |
| * Copyright (C) 2009 Marvell Semiconductor |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/ctype.h> |
| #include <linux/uaccess.h> |
| #include <linux/rwsem.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/hardirq.h> /* for in_atomic() */ |
| #include <linux/gfp.h> |
| #include <linux/highmem.h> |
| #include <linux/hugetlb.h> |
| #include <asm/current.h> |
| #include <asm/page.h> |
| |
| static int |
| pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) |
| { |
| unsigned long addr = (unsigned long)_addr; |
| pgd_t *pgd; |
| p4d_t *p4d; |
| pmd_t *pmd; |
| pte_t *pte; |
| pud_t *pud; |
| spinlock_t *ptl; |
| |
| pgd = pgd_offset(current->mm, addr); |
| if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) |
| return 0; |
| |
| p4d = p4d_offset(pgd, addr); |
| if (unlikely(p4d_none(*p4d) || p4d_bad(*p4d))) |
| return 0; |
| |
| pud = pud_offset(p4d, addr); |
| if (unlikely(pud_none(*pud) || pud_bad(*pud))) |
| return 0; |
| |
| pmd = pmd_offset(pud, addr); |
| if (unlikely(pmd_none(*pmd))) |
| return 0; |
| |
| /* |
| * A pmd can be bad if it refers to a HugeTLB or THP page. |
| * |
| * Both THP and HugeTLB pages have the same pmd layout |
| * and should not be manipulated by the pte functions. |
| * |
| * Lock the page table for the destination and check |
| * to see that it's still huge and whether or not we will |
| * need to fault on write. |
| */ |
| if (unlikely(pmd_thp_or_huge(*pmd))) { |
| ptl = ¤t->mm->page_table_lock; |
| spin_lock(ptl); |
| if (unlikely(!pmd_thp_or_huge(*pmd) |
| || pmd_hugewillfault(*pmd))) { |
| spin_unlock(ptl); |
| return 0; |
| } |
| |
| *ptep = NULL; |
| *ptlp = ptl; |
| return 1; |
| } |
| |
| if (unlikely(pmd_bad(*pmd))) |
| return 0; |
| |
| pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); |
| if (unlikely(!pte_present(*pte) || !pte_young(*pte) || |
| !pte_write(*pte) || !pte_dirty(*pte))) { |
| pte_unmap_unlock(pte, ptl); |
| return 0; |
| } |
| |
| *ptep = pte; |
| *ptlp = ptl; |
| |
| return 1; |
| } |
| |
| static unsigned long noinline |
| __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) |
| { |
| unsigned long ua_flags; |
| int atomic; |
| |
| /* the mmap semaphore is taken only if not in an atomic context */ |
| atomic = faulthandler_disabled(); |
| |
| if (!atomic) |
| mmap_read_lock(current->mm); |
| while (n) { |
| pte_t *pte; |
| spinlock_t *ptl; |
| int tocopy; |
| |
| while (!pin_page_for_write(to, &pte, &ptl)) { |
| if (!atomic) |
| mmap_read_unlock(current->mm); |
| if (__put_user(0, (char __user *)to)) |
| goto out; |
| if (!atomic) |
| mmap_read_lock(current->mm); |
| } |
| |
| tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1; |
| if (tocopy > n) |
| tocopy = n; |
| |
| ua_flags = uaccess_save_and_enable(); |
| memcpy((void *)to, from, tocopy); |
| uaccess_restore(ua_flags); |
| to += tocopy; |
| from += tocopy; |
| n -= tocopy; |
| |
| if (pte) |
| pte_unmap_unlock(pte, ptl); |
| else |
| spin_unlock(ptl); |
| } |
| if (!atomic) |
| mmap_read_unlock(current->mm); |
| |
| out: |
| return n; |
| } |
| |
| unsigned long |
| arm_copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| /* |
| * This test is stubbed out of the main function above to keep |
| * the overhead for small copies low by avoiding a large |
| * register dump on the stack just to reload them right away. |
| * With frame pointer disabled, tail call optimization kicks in |
| * as well making this test almost invisible. |
| */ |
| if (n < 64) { |
| unsigned long ua_flags = uaccess_save_and_enable(); |
| n = __copy_to_user_std(to, from, n); |
| uaccess_restore(ua_flags); |
| } else { |
| n = __copy_to_user_memcpy(uaccess_mask_range_ptr(to, n), |
| from, n); |
| } |
| return n; |
| } |
| |
| static unsigned long noinline |
| __clear_user_memset(void __user *addr, unsigned long n) |
| { |
| unsigned long ua_flags; |
| |
| mmap_read_lock(current->mm); |
| while (n) { |
| pte_t *pte; |
| spinlock_t *ptl; |
| int tocopy; |
| |
| while (!pin_page_for_write(addr, &pte, &ptl)) { |
| mmap_read_unlock(current->mm); |
| if (__put_user(0, (char __user *)addr)) |
| goto out; |
| mmap_read_lock(current->mm); |
| } |
| |
| tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1; |
| if (tocopy > n) |
| tocopy = n; |
| |
| ua_flags = uaccess_save_and_enable(); |
| memset((void *)addr, 0, tocopy); |
| uaccess_restore(ua_flags); |
| addr += tocopy; |
| n -= tocopy; |
| |
| if (pte) |
| pte_unmap_unlock(pte, ptl); |
| else |
| spin_unlock(ptl); |
| } |
| mmap_read_unlock(current->mm); |
| |
| out: |
| return n; |
| } |
| |
| unsigned long arm_clear_user(void __user *addr, unsigned long n) |
| { |
| /* See rational for this in __copy_to_user() above. */ |
| if (n < 64) { |
| unsigned long ua_flags = uaccess_save_and_enable(); |
| n = __clear_user_std(addr, n); |
| uaccess_restore(ua_flags); |
| } else { |
| n = __clear_user_memset(addr, n); |
| } |
| return n; |
| } |
| |
| #if 0 |
| |
| /* |
| * This code is disabled by default, but kept around in case the chosen |
| * thresholds need to be revalidated. Some overhead (small but still) |
| * would be implied by a runtime determined variable threshold, and |
| * so far the measurement on concerned targets didn't show a worthwhile |
| * variation. |
| * |
| * Note that a fairly precise sched_clock() implementation is needed |
| * for results to make some sense. |
| */ |
| |
| #include <linux/vmalloc.h> |
| |
| static int __init test_size_treshold(void) |
| { |
| struct page *src_page, *dst_page; |
| void *user_ptr, *kernel_ptr; |
| unsigned long long t0, t1, t2; |
| int size, ret; |
| |
| ret = -ENOMEM; |
| src_page = alloc_page(GFP_KERNEL); |
| if (!src_page) |
| goto no_src; |
| dst_page = alloc_page(GFP_KERNEL); |
| if (!dst_page) |
| goto no_dst; |
| kernel_ptr = page_address(src_page); |
| user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__PAGE_COPY)); |
| if (!user_ptr) |
| goto no_vmap; |
| |
| /* warm up the src page dcache */ |
| ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE); |
| |
| for (size = PAGE_SIZE; size >= 4; size /= 2) { |
| t0 = sched_clock(); |
| ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size); |
| t1 = sched_clock(); |
| ret |= __copy_to_user_std(user_ptr, kernel_ptr, size); |
| t2 = sched_clock(); |
| printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); |
| } |
| |
| for (size = PAGE_SIZE; size >= 4; size /= 2) { |
| t0 = sched_clock(); |
| ret |= __clear_user_memset(user_ptr, size); |
| t1 = sched_clock(); |
| ret |= __clear_user_std(user_ptr, size); |
| t2 = sched_clock(); |
| printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); |
| } |
| |
| if (ret) |
| ret = -EFAULT; |
| |
| vunmap(user_ptr); |
| no_vmap: |
| put_page(dst_page); |
| no_dst: |
| put_page(src_page); |
| no_src: |
| return ret; |
| } |
| |
| subsys_initcall(test_size_treshold); |
| |
| #endif |