| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Copyright 2017 Broadcom. All Rights Reserved. | 
 |  * The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. | 
 |  * | 
 |  * Contact Information: | 
 |  * linux-drivers@broadcom.com | 
 |  */ | 
 |  | 
 | #include <scsi/iscsi_proto.h> | 
 |  | 
 | #include "be_main.h" | 
 | #include "be.h" | 
 | #include "be_mgmt.h" | 
 |  | 
 | /* UE Status Low CSR */ | 
 | static const char * const desc_ue_status_low[] = { | 
 | 	"CEV", | 
 | 	"CTX", | 
 | 	"DBUF", | 
 | 	"ERX", | 
 | 	"Host", | 
 | 	"MPU", | 
 | 	"NDMA", | 
 | 	"PTC ", | 
 | 	"RDMA ", | 
 | 	"RXF ", | 
 | 	"RXIPS ", | 
 | 	"RXULP0 ", | 
 | 	"RXULP1 ", | 
 | 	"RXULP2 ", | 
 | 	"TIM ", | 
 | 	"TPOST ", | 
 | 	"TPRE ", | 
 | 	"TXIPS ", | 
 | 	"TXULP0 ", | 
 | 	"TXULP1 ", | 
 | 	"UC ", | 
 | 	"WDMA ", | 
 | 	"TXULP2 ", | 
 | 	"HOST1 ", | 
 | 	"P0_OB_LINK ", | 
 | 	"P1_OB_LINK ", | 
 | 	"HOST_GPIO ", | 
 | 	"MBOX ", | 
 | 	"AXGMAC0", | 
 | 	"AXGMAC1", | 
 | 	"JTAG", | 
 | 	"MPU_INTPEND" | 
 | }; | 
 |  | 
 | /* UE Status High CSR */ | 
 | static const char * const desc_ue_status_hi[] = { | 
 | 	"LPCMEMHOST", | 
 | 	"MGMT_MAC", | 
 | 	"PCS0ONLINE", | 
 | 	"MPU_IRAM", | 
 | 	"PCS1ONLINE", | 
 | 	"PCTL0", | 
 | 	"PCTL1", | 
 | 	"PMEM", | 
 | 	"RR", | 
 | 	"TXPB", | 
 | 	"RXPP", | 
 | 	"XAUI", | 
 | 	"TXP", | 
 | 	"ARM", | 
 | 	"IPC", | 
 | 	"HOST2", | 
 | 	"HOST3", | 
 | 	"HOST4", | 
 | 	"HOST5", | 
 | 	"HOST6", | 
 | 	"HOST7", | 
 | 	"HOST8", | 
 | 	"HOST9", | 
 | 	"NETC", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown", | 
 | 	"Unknown" | 
 | }; | 
 |  | 
 | struct be_mcc_wrb *alloc_mcc_wrb(struct beiscsi_hba *phba, | 
 | 				 unsigned int *ref_tag) | 
 | { | 
 | 	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; | 
 | 	struct be_mcc_wrb *wrb = NULL; | 
 | 	unsigned int tag; | 
 |  | 
 | 	spin_lock(&phba->ctrl.mcc_lock); | 
 | 	if (mccq->used == mccq->len) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | | 
 | 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 			    "BC_%d : MCC queue full: WRB used %u tag avail %u\n", | 
 | 			    mccq->used, phba->ctrl.mcc_tag_available); | 
 | 		goto alloc_failed; | 
 | 	} | 
 |  | 
 | 	if (!phba->ctrl.mcc_tag_available) | 
 | 		goto alloc_failed; | 
 |  | 
 | 	tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index]; | 
 | 	if (!tag) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | | 
 | 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 			    "BC_%d : MCC tag 0 allocated: tag avail %u alloc index %u\n", | 
 | 			    phba->ctrl.mcc_tag_available, | 
 | 			    phba->ctrl.mcc_alloc_index); | 
 | 		goto alloc_failed; | 
 | 	} | 
 |  | 
 | 	/* return this tag for further reference */ | 
 | 	*ref_tag = tag; | 
 | 	phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0; | 
 | 	phba->ctrl.mcc_tag_status[tag] = 0; | 
 | 	phba->ctrl.ptag_state[tag].tag_state = 0; | 
 | 	phba->ctrl.ptag_state[tag].cbfn = NULL; | 
 | 	phba->ctrl.mcc_tag_available--; | 
 | 	if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1)) | 
 | 		phba->ctrl.mcc_alloc_index = 0; | 
 | 	else | 
 | 		phba->ctrl.mcc_alloc_index++; | 
 |  | 
 | 	wrb = queue_head_node(mccq); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	wrb->tag0 = tag; | 
 | 	wrb->tag0 |= (mccq->head << MCC_Q_WRB_IDX_SHIFT) & MCC_Q_WRB_IDX_MASK; | 
 | 	queue_head_inc(mccq); | 
 | 	mccq->used++; | 
 |  | 
 | alloc_failed: | 
 | 	spin_unlock(&phba->ctrl.mcc_lock); | 
 | 	return wrb; | 
 | } | 
 |  | 
 | void free_mcc_wrb(struct be_ctrl_info *ctrl, unsigned int tag) | 
 | { | 
 | 	struct be_queue_info *mccq = &ctrl->mcc_obj.q; | 
 |  | 
 | 	spin_lock(&ctrl->mcc_lock); | 
 | 	tag = tag & MCC_Q_CMD_TAG_MASK; | 
 | 	ctrl->mcc_tag[ctrl->mcc_free_index] = tag; | 
 | 	if (ctrl->mcc_free_index == (MAX_MCC_CMD - 1)) | 
 | 		ctrl->mcc_free_index = 0; | 
 | 	else | 
 | 		ctrl->mcc_free_index++; | 
 | 	ctrl->mcc_tag_available++; | 
 | 	mccq->used--; | 
 | 	spin_unlock(&ctrl->mcc_lock); | 
 | } | 
 |  | 
 | /* | 
 |  * beiscsi_mcc_compl_status - Return the status of MCC completion | 
 |  * @phba: Driver private structure | 
 |  * @tag: Tag for the MBX Command | 
 |  * @wrb: the WRB used for the MBX Command | 
 |  * @mbx_cmd_mem: ptr to memory allocated for MBX Cmd | 
 |  * | 
 |  * return | 
 |  * Success: 0 | 
 |  * Failure: Non-Zero | 
 |  */ | 
 | int __beiscsi_mcc_compl_status(struct beiscsi_hba *phba, | 
 | 			       unsigned int tag, | 
 | 			       struct be_mcc_wrb **wrb, | 
 | 			       struct be_dma_mem *mbx_cmd_mem) | 
 | { | 
 | 	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; | 
 | 	uint16_t status = 0, addl_status = 0, wrb_num = 0; | 
 | 	struct be_cmd_resp_hdr *mbx_resp_hdr; | 
 | 	struct be_cmd_req_hdr *mbx_hdr; | 
 | 	struct be_mcc_wrb *temp_wrb; | 
 | 	uint32_t mcc_tag_status; | 
 | 	int rc = 0; | 
 |  | 
 | 	mcc_tag_status = phba->ctrl.mcc_tag_status[tag]; | 
 | 	status = (mcc_tag_status & CQE_STATUS_MASK); | 
 | 	addl_status = ((mcc_tag_status & CQE_STATUS_ADDL_MASK) >> | 
 | 			CQE_STATUS_ADDL_SHIFT); | 
 |  | 
 | 	if (mbx_cmd_mem) { | 
 | 		mbx_hdr = (struct be_cmd_req_hdr *)mbx_cmd_mem->va; | 
 | 	} else { | 
 | 		wrb_num = (mcc_tag_status & CQE_STATUS_WRB_MASK) >> | 
 | 			  CQE_STATUS_WRB_SHIFT; | 
 | 		temp_wrb = (struct be_mcc_wrb *)queue_get_wrb(mccq, wrb_num); | 
 | 		mbx_hdr = embedded_payload(temp_wrb); | 
 |  | 
 | 		if (wrb) | 
 | 			*wrb = temp_wrb; | 
 | 	} | 
 |  | 
 | 	if (status || addl_status) { | 
 | 		beiscsi_log(phba, KERN_WARNING, | 
 | 			    BEISCSI_LOG_INIT | BEISCSI_LOG_EH | | 
 | 			    BEISCSI_LOG_CONFIG, | 
 | 			    "BC_%d : MBX Cmd Failed for Subsys : %d Opcode : %d with Status : %d and Extd_Status : %d\n", | 
 | 			    mbx_hdr->subsystem, mbx_hdr->opcode, | 
 | 			    status, addl_status); | 
 | 		rc = -EIO; | 
 | 		if (status == MCC_STATUS_INSUFFICIENT_BUFFER) { | 
 | 			mbx_resp_hdr = (struct be_cmd_resp_hdr *)mbx_hdr; | 
 | 			beiscsi_log(phba, KERN_WARNING, | 
 | 				    BEISCSI_LOG_INIT | BEISCSI_LOG_EH | | 
 | 				    BEISCSI_LOG_CONFIG, | 
 | 				    "BC_%d : Insufficient Buffer Error Resp_Len : %d Actual_Resp_Len : %d\n", | 
 | 				    mbx_resp_hdr->response_length, | 
 | 				    mbx_resp_hdr->actual_resp_len); | 
 | 			rc = -EAGAIN; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * beiscsi_mccq_compl_wait()- Process completion in MCC CQ | 
 |  * @phba: Driver private structure | 
 |  * @tag: Tag for the MBX Command | 
 |  * @wrb: the WRB used for the MBX Command | 
 |  * @mbx_cmd_mem: ptr to memory allocated for MBX Cmd | 
 |  * | 
 |  * Waits for MBX completion with the passed TAG. | 
 |  * | 
 |  * return | 
 |  * Success: 0 | 
 |  * Failure: Non-Zero | 
 |  **/ | 
 | int beiscsi_mccq_compl_wait(struct beiscsi_hba *phba, | 
 | 			    unsigned int tag, | 
 | 			    struct be_mcc_wrb **wrb, | 
 | 			    struct be_dma_mem *mbx_cmd_mem) | 
 | { | 
 | 	int rc = 0; | 
 |  | 
 | 	if (!tag || tag > MAX_MCC_CMD) { | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			      "BC_%d : invalid tag %u\n", tag); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (beiscsi_hba_in_error(phba)) { | 
 | 		clear_bit(MCC_TAG_STATE_RUNNING, | 
 | 			  &phba->ctrl.ptag_state[tag].tag_state); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	/* wait for the mccq completion */ | 
 | 	rc = wait_event_interruptible_timeout(phba->ctrl.mcc_wait[tag], | 
 | 					      phba->ctrl.mcc_tag_status[tag], | 
 | 					      msecs_to_jiffies( | 
 | 						BEISCSI_HOST_MBX_TIMEOUT)); | 
 | 	/** | 
 | 	 * Return EIO if port is being disabled. Associated DMA memory, if any, | 
 | 	 * is freed by the caller. When port goes offline, MCCQ is cleaned up | 
 | 	 * so does WRB. | 
 | 	 */ | 
 | 	if (!test_bit(BEISCSI_HBA_ONLINE, &phba->state)) { | 
 | 		clear_bit(MCC_TAG_STATE_RUNNING, | 
 | 			  &phba->ctrl.ptag_state[tag].tag_state); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * If MBOX cmd timeout expired, tag and resource allocated | 
 | 	 * for cmd is not freed until FW returns completion. | 
 | 	 */ | 
 | 	if (rc <= 0) { | 
 | 		struct be_dma_mem *tag_mem; | 
 |  | 
 | 		/** | 
 | 		 * PCI/DMA memory allocated and posted in non-embedded mode | 
 | 		 * will have mbx_cmd_mem != NULL. | 
 | 		 * Save virtual and bus addresses for the command so that it | 
 | 		 * can be freed later. | 
 | 		 **/ | 
 | 		tag_mem = &phba->ctrl.ptag_state[tag].tag_mem_state; | 
 | 		if (mbx_cmd_mem) { | 
 | 			tag_mem->size = mbx_cmd_mem->size; | 
 | 			tag_mem->va = mbx_cmd_mem->va; | 
 | 			tag_mem->dma = mbx_cmd_mem->dma; | 
 | 		} else | 
 | 			tag_mem->size = 0; | 
 |  | 
 | 		/* first make tag_mem_state visible to all */ | 
 | 		wmb(); | 
 | 		set_bit(MCC_TAG_STATE_TIMEOUT, | 
 | 				&phba->ctrl.ptag_state[tag].tag_state); | 
 |  | 
 | 		beiscsi_log(phba, KERN_ERR, | 
 | 			    BEISCSI_LOG_INIT | BEISCSI_LOG_EH | | 
 | 			    BEISCSI_LOG_CONFIG, | 
 | 			    "BC_%d : MBX Cmd Completion timed out\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	rc = __beiscsi_mcc_compl_status(phba, tag, wrb, mbx_cmd_mem); | 
 |  | 
 | 	free_mcc_wrb(&phba->ctrl, tag); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * beiscsi_process_mbox_compl()- Check the MBX completion status | 
 |  * @ctrl: Function specific MBX data structure | 
 |  * @compl: Completion status of MBX Command | 
 |  * | 
 |  * Check for the MBX completion status when BMBX method used | 
 |  * | 
 |  * return | 
 |  * Success: Zero | 
 |  * Failure: Non-Zero | 
 |  **/ | 
 | static int beiscsi_process_mbox_compl(struct be_ctrl_info *ctrl, | 
 | 				      struct be_mcc_compl *compl) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	struct be_cmd_req_hdr *hdr = embedded_payload(wrb); | 
 | 	u16 compl_status, extd_status; | 
 |  | 
 | 	/** | 
 | 	 * To check if valid bit is set, check the entire word as we don't know | 
 | 	 * the endianness of the data (old entry is host endian while a new | 
 | 	 * entry is little endian) | 
 | 	 */ | 
 | 	if (!compl->flags) { | 
 | 		beiscsi_log(phba, KERN_ERR, | 
 | 				BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 				"BC_%d : BMBX busy, no completion\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 | 	compl->flags = le32_to_cpu(compl->flags); | 
 | 	WARN_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0); | 
 |  | 
 | 	/** | 
 | 	 * Just swap the status to host endian; | 
 | 	 * mcc tag is opaquely copied from mcc_wrb. | 
 | 	 */ | 
 | 	be_dws_le_to_cpu(compl, 4); | 
 | 	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) & | 
 | 		CQE_STATUS_COMPL_MASK; | 
 | 	extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & | 
 | 		CQE_STATUS_EXTD_MASK; | 
 | 	/* Need to reset the entire word that houses the valid bit */ | 
 | 	compl->flags = 0; | 
 |  | 
 | 	if (compl_status == MCC_STATUS_SUCCESS) | 
 | 		return 0; | 
 |  | 
 | 	beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 		    "BC_%d : error in cmd completion: Subsystem : %d Opcode : %d status(compl/extd)=%d/%d\n", | 
 | 		    hdr->subsystem, hdr->opcode, compl_status, extd_status); | 
 | 	return compl_status; | 
 | } | 
 |  | 
 | static void beiscsi_process_async_link(struct beiscsi_hba *phba, | 
 | 				       struct be_mcc_compl *compl) | 
 | { | 
 | 	struct be_async_event_link_state *evt; | 
 |  | 
 | 	evt = (struct be_async_event_link_state *)compl; | 
 |  | 
 | 	phba->port_speed = evt->port_speed; | 
 | 	/** | 
 | 	 * Check logical link status in ASYNC event. | 
 | 	 * This has been newly introduced in SKH-R Firmware 10.0.338.45. | 
 | 	 **/ | 
 | 	if (evt->port_link_status & BE_ASYNC_LINK_UP_MASK) { | 
 | 		set_bit(BEISCSI_HBA_LINK_UP, &phba->state); | 
 | 		if (test_bit(BEISCSI_HBA_BOOT_FOUND, &phba->state)) | 
 | 			beiscsi_start_boot_work(phba, BE_BOOT_INVALID_SHANDLE); | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			      "BC_%d : Link Up on Port %d tag 0x%x\n", | 
 | 			      evt->physical_port, evt->event_tag); | 
 | 	} else { | 
 | 		clear_bit(BEISCSI_HBA_LINK_UP, &phba->state); | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			      "BC_%d : Link Down on Port %d tag 0x%x\n", | 
 | 			      evt->physical_port, evt->event_tag); | 
 | 		iscsi_host_for_each_session(phba->shost, | 
 | 					    beiscsi_session_fail); | 
 | 	} | 
 | } | 
 |  | 
 | static char *beiscsi_port_misconf_event_msg[] = { | 
 | 	"Physical Link is functional.", | 
 | 	"Optics faulted/incorrectly installed/not installed - Reseat optics, if issue not resolved, replace.", | 
 | 	"Optics of two types installed - Remove one optic or install matching pair of optics.", | 
 | 	"Incompatible optics - Replace with compatible optics for card to function.", | 
 | 	"Unqualified optics - Replace with Avago optics for Warranty and Technical Support.", | 
 | 	"Uncertified optics - Replace with Avago Certified optics to enable link operation." | 
 | }; | 
 |  | 
 | static void beiscsi_process_async_sli(struct beiscsi_hba *phba, | 
 | 				      struct be_mcc_compl *compl) | 
 | { | 
 | 	struct be_async_event_sli *async_sli; | 
 | 	u8 evt_type, state, old_state, le; | 
 | 	char *sev = KERN_WARNING; | 
 | 	char *msg = NULL; | 
 |  | 
 | 	evt_type = compl->flags >> ASYNC_TRAILER_EVENT_TYPE_SHIFT; | 
 | 	evt_type &= ASYNC_TRAILER_EVENT_TYPE_MASK; | 
 |  | 
 | 	/* processing only MISCONFIGURED physical port event */ | 
 | 	if (evt_type != ASYNC_SLI_EVENT_TYPE_MISCONFIGURED) | 
 | 		return; | 
 |  | 
 | 	async_sli = (struct be_async_event_sli *)compl; | 
 | 	state = async_sli->event_data1 >> | 
 | 		 (phba->fw_config.phys_port * 8) & 0xff; | 
 | 	le = async_sli->event_data2 >> | 
 | 		 (phba->fw_config.phys_port * 8) & 0xff; | 
 |  | 
 | 	old_state = phba->optic_state; | 
 | 	phba->optic_state = state; | 
 |  | 
 | 	if (state >= ARRAY_SIZE(beiscsi_port_misconf_event_msg)) { | 
 | 		/* fw is reporting a state we don't know, log and return */ | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			    "BC_%d : Port %c: Unrecognized optic state 0x%x\n", | 
 | 			    phba->port_name, async_sli->event_data1); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (ASYNC_SLI_LINK_EFFECT_VALID(le)) { | 
 | 		/* log link effect for unqualified-4, uncertified-5 optics */ | 
 | 		if (state > 3) | 
 | 			msg = (ASYNC_SLI_LINK_EFFECT_STATE(le)) ? | 
 | 				" Link is non-operational." : | 
 | 				" Link is operational."; | 
 | 		/* 1 - info */ | 
 | 		if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 1) | 
 | 			sev = KERN_INFO; | 
 | 		/* 2 - error */ | 
 | 		if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 2) | 
 | 			sev = KERN_ERR; | 
 | 	} | 
 |  | 
 | 	if (old_state != phba->optic_state) | 
 | 		__beiscsi_log(phba, sev, "BC_%d : Port %c: %s%s\n", | 
 | 			      phba->port_name, | 
 | 			      beiscsi_port_misconf_event_msg[state], | 
 | 			      !msg ? "" : msg); | 
 | } | 
 |  | 
 | void beiscsi_process_async_event(struct beiscsi_hba *phba, | 
 | 				struct be_mcc_compl *compl) | 
 | { | 
 | 	char *sev = KERN_INFO; | 
 | 	u8 evt_code; | 
 |  | 
 | 	/* interpret flags as an async trailer */ | 
 | 	evt_code = compl->flags >> ASYNC_TRAILER_EVENT_CODE_SHIFT; | 
 | 	evt_code &= ASYNC_TRAILER_EVENT_CODE_MASK; | 
 | 	switch (evt_code) { | 
 | 	case ASYNC_EVENT_CODE_LINK_STATE: | 
 | 		beiscsi_process_async_link(phba, compl); | 
 | 		break; | 
 | 	case ASYNC_EVENT_CODE_ISCSI: | 
 | 		if (test_bit(BEISCSI_HBA_BOOT_FOUND, &phba->state)) | 
 | 			beiscsi_start_boot_work(phba, BE_BOOT_INVALID_SHANDLE); | 
 | 		sev = KERN_ERR; | 
 | 		break; | 
 | 	case ASYNC_EVENT_CODE_SLI: | 
 | 		beiscsi_process_async_sli(phba, compl); | 
 | 		break; | 
 | 	default: | 
 | 		/* event not registered */ | 
 | 		sev = KERN_ERR; | 
 | 	} | 
 |  | 
 | 	beiscsi_log(phba, sev, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 		    "BC_%d : ASYNC Event %x: status 0x%08x flags 0x%08x\n", | 
 | 		    evt_code, compl->status, compl->flags); | 
 | } | 
 |  | 
 | int beiscsi_process_mcc_compl(struct be_ctrl_info *ctrl, | 
 | 			      struct be_mcc_compl *compl) | 
 | { | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	u16 compl_status, extd_status; | 
 | 	struct be_dma_mem *tag_mem; | 
 | 	unsigned int tag, wrb_idx; | 
 |  | 
 | 	be_dws_le_to_cpu(compl, 4); | 
 | 	tag = (compl->tag0 & MCC_Q_CMD_TAG_MASK); | 
 | 	wrb_idx = (compl->tag0 & CQE_STATUS_WRB_MASK) >> CQE_STATUS_WRB_SHIFT; | 
 |  | 
 | 	if (!test_bit(MCC_TAG_STATE_RUNNING, | 
 | 		      &ctrl->ptag_state[tag].tag_state)) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_MBOX | | 
 | 			    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, | 
 | 			    "BC_%d : MBX cmd completed but not posted\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* end MCC with this tag */ | 
 | 	clear_bit(MCC_TAG_STATE_RUNNING, &ctrl->ptag_state[tag].tag_state); | 
 |  | 
 | 	if (test_bit(MCC_TAG_STATE_TIMEOUT, &ctrl->ptag_state[tag].tag_state)) { | 
 | 		beiscsi_log(phba, KERN_WARNING, | 
 | 			    BEISCSI_LOG_MBOX | BEISCSI_LOG_INIT | | 
 | 			    BEISCSI_LOG_CONFIG, | 
 | 			    "BC_%d : MBX Completion for timeout Command from FW\n"); | 
 | 		/** | 
 | 		 * Check for the size before freeing resource. | 
 | 		 * Only for non-embedded cmd, PCI resource is allocated. | 
 | 		 **/ | 
 | 		tag_mem = &ctrl->ptag_state[tag].tag_mem_state; | 
 | 		if (tag_mem->size) { | 
 | 			dma_free_coherent(&ctrl->pdev->dev, tag_mem->size, | 
 | 					tag_mem->va, tag_mem->dma); | 
 | 			tag_mem->size = 0; | 
 | 		} | 
 | 		free_mcc_wrb(ctrl, tag); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) & | 
 | 		       CQE_STATUS_COMPL_MASK; | 
 | 	extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & | 
 | 		      CQE_STATUS_EXTD_MASK; | 
 | 	/* The ctrl.mcc_tag_status[tag] is filled with | 
 | 	 * [31] = valid, [30:24] = Rsvd, [23:16] = wrb, [15:8] = extd_status, | 
 | 	 * [7:0] = compl_status | 
 | 	 */ | 
 | 	ctrl->mcc_tag_status[tag] = CQE_VALID_MASK; | 
 | 	ctrl->mcc_tag_status[tag] |= (wrb_idx << CQE_STATUS_WRB_SHIFT); | 
 | 	ctrl->mcc_tag_status[tag] |= (extd_status << CQE_STATUS_ADDL_SHIFT) & | 
 | 				     CQE_STATUS_ADDL_MASK; | 
 | 	ctrl->mcc_tag_status[tag] |= (compl_status & CQE_STATUS_MASK); | 
 |  | 
 | 	if (test_bit(MCC_TAG_STATE_ASYNC, &ctrl->ptag_state[tag].tag_state)) { | 
 | 		if (ctrl->ptag_state[tag].cbfn) | 
 | 			ctrl->ptag_state[tag].cbfn(phba, tag); | 
 | 		else | 
 | 			__beiscsi_log(phba, KERN_ERR, | 
 | 				      "BC_%d : MBX ASYNC command with no callback\n"); | 
 | 		free_mcc_wrb(ctrl, tag); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (test_bit(MCC_TAG_STATE_IGNORE, &ctrl->ptag_state[tag].tag_state)) { | 
 | 		/* just check completion status and free wrb */ | 
 | 		__beiscsi_mcc_compl_status(phba, tag, NULL, NULL); | 
 | 		free_mcc_wrb(ctrl, tag); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	wake_up_interruptible(&ctrl->mcc_wait[tag]); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void be_mcc_notify(struct beiscsi_hba *phba, unsigned int tag) | 
 | { | 
 | 	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; | 
 | 	u32 val = 0; | 
 |  | 
 | 	set_bit(MCC_TAG_STATE_RUNNING, &phba->ctrl.ptag_state[tag].tag_state); | 
 | 	val |= mccq->id & DB_MCCQ_RING_ID_MASK; | 
 | 	val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT; | 
 | 	/* make request available for DMA */ | 
 | 	wmb(); | 
 | 	iowrite32(val, phba->db_va + DB_MCCQ_OFFSET); | 
 | } | 
 |  | 
 | /* | 
 |  * be_mbox_db_ready_poll()- Check ready status | 
 |  * @ctrl: Function specific MBX data structure | 
 |  * | 
 |  * Check for the ready status of FW to send BMBX | 
 |  * commands to adapter. | 
 |  * | 
 |  * return | 
 |  * Success: 0 | 
 |  * Failure: Non-Zero | 
 |  **/ | 
 | static int be_mbox_db_ready_poll(struct be_ctrl_info *ctrl) | 
 | { | 
 | 	/* wait 30s for generic non-flash MBOX operation */ | 
 | #define BEISCSI_MBX_RDY_BIT_TIMEOUT	30000 | 
 | 	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET; | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	unsigned long timeout; | 
 | 	u32 ready; | 
 |  | 
 | 	/* | 
 | 	 * This BMBX busy wait path is used during init only. | 
 | 	 * For the commands executed during init, 5s should suffice. | 
 | 	 */ | 
 | 	timeout = jiffies + msecs_to_jiffies(BEISCSI_MBX_RDY_BIT_TIMEOUT); | 
 | 	do { | 
 | 		if (beiscsi_hba_in_error(phba)) | 
 | 			return -EIO; | 
 |  | 
 | 		ready = ioread32(db); | 
 | 		if (ready == 0xffffffff) | 
 | 			return -EIO; | 
 |  | 
 | 		ready &= MPU_MAILBOX_DB_RDY_MASK; | 
 | 		if (ready) | 
 | 			return 0; | 
 |  | 
 | 		if (time_after(jiffies, timeout)) | 
 | 			break; | 
 | 		/* 1ms sleep is enough in most cases */ | 
 | 		schedule_timeout_uninterruptible(msecs_to_jiffies(1)); | 
 | 	} while (!ready); | 
 |  | 
 | 	beiscsi_log(phba, KERN_ERR, | 
 | 			BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, | 
 | 			"BC_%d : FW Timed Out\n"); | 
 | 	set_bit(BEISCSI_HBA_FW_TIMEOUT, &phba->state); | 
 | 	return -EBUSY; | 
 | } | 
 |  | 
 | /* | 
 |  * be_mbox_notify: Notify adapter of new BMBX command | 
 |  * @ctrl: Function specific MBX data structure | 
 |  * | 
 |  * Ring doorbell to inform adapter of a BMBX command | 
 |  * to process | 
 |  * | 
 |  * return | 
 |  * Success: 0 | 
 |  * Failure: Non-Zero | 
 |  **/ | 
 | static int be_mbox_notify(struct be_ctrl_info *ctrl) | 
 | { | 
 | 	int status; | 
 | 	u32 val = 0; | 
 | 	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET; | 
 | 	struct be_dma_mem *mbox_mem = &ctrl->mbox_mem; | 
 | 	struct be_mcc_mailbox *mbox = mbox_mem->va; | 
 |  | 
 | 	status = be_mbox_db_ready_poll(ctrl); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	val &= ~MPU_MAILBOX_DB_RDY_MASK; | 
 | 	val |= MPU_MAILBOX_DB_HI_MASK; | 
 | 	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2; | 
 | 	iowrite32(val, db); | 
 |  | 
 | 	status = be_mbox_db_ready_poll(ctrl); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	val = 0; | 
 | 	val &= ~MPU_MAILBOX_DB_RDY_MASK; | 
 | 	val &= ~MPU_MAILBOX_DB_HI_MASK; | 
 | 	val |= (u32) (mbox_mem->dma >> 4) << 2; | 
 | 	iowrite32(val, db); | 
 |  | 
 | 	status = be_mbox_db_ready_poll(ctrl); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* RDY is set; small delay before CQE read. */ | 
 | 	udelay(1); | 
 |  | 
 | 	status = beiscsi_process_mbox_compl(ctrl, &mbox->compl); | 
 | 	return status; | 
 | } | 
 |  | 
 | void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, u32 payload_len, | 
 | 			bool embedded, u8 sge_cnt) | 
 | { | 
 | 	if (embedded) | 
 | 		wrb->emb_sgecnt_special |= MCC_WRB_EMBEDDED_MASK; | 
 | 	else | 
 | 		wrb->emb_sgecnt_special |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) << | 
 | 					   MCC_WRB_SGE_CNT_SHIFT; | 
 | 	wrb->payload_length = payload_len; | 
 | 	be_dws_cpu_to_le(wrb, 8); | 
 | } | 
 |  | 
 | void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, | 
 | 			u8 subsystem, u8 opcode, u32 cmd_len) | 
 | { | 
 | 	req_hdr->opcode = opcode; | 
 | 	req_hdr->subsystem = subsystem; | 
 | 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr)); | 
 | 	req_hdr->timeout = BEISCSI_FW_MBX_TIMEOUT; | 
 | } | 
 |  | 
 | static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages, | 
 | 							struct be_dma_mem *mem) | 
 | { | 
 | 	int i, buf_pages; | 
 | 	u64 dma = (u64) mem->dma; | 
 |  | 
 | 	buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages); | 
 | 	for (i = 0; i < buf_pages; i++) { | 
 | 		pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF); | 
 | 		pages[i].hi = cpu_to_le32(upper_32_bits(dma)); | 
 | 		dma += PAGE_SIZE_4K; | 
 | 	} | 
 | } | 
 |  | 
 | static u32 eq_delay_to_mult(u32 usec_delay) | 
 | { | 
 | #define MAX_INTR_RATE 651042 | 
 | 	const u32 round = 10; | 
 | 	u32 multiplier; | 
 |  | 
 | 	if (usec_delay == 0) | 
 | 		multiplier = 0; | 
 | 	else { | 
 | 		u32 interrupt_rate = 1000000 / usec_delay; | 
 | 		if (interrupt_rate == 0) | 
 | 			multiplier = 1023; | 
 | 		else { | 
 | 			multiplier = (MAX_INTR_RATE - interrupt_rate) * round; | 
 | 			multiplier /= interrupt_rate; | 
 | 			multiplier = (multiplier + round / 2) / round; | 
 | 			multiplier = min(multiplier, (u32) 1023); | 
 | 		} | 
 | 	} | 
 | 	return multiplier; | 
 | } | 
 |  | 
 | struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem) | 
 | { | 
 | 	return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb; | 
 | } | 
 |  | 
 | int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl, | 
 | 			  struct be_queue_info *eq, int eq_delay) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_cmd_req_eq_create *req = embedded_payload(wrb); | 
 | 	struct be_cmd_resp_eq_create *resp = embedded_payload(wrb); | 
 | 	struct be_dma_mem *q_mem = &eq->dma_mem; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			OPCODE_COMMON_EQ_CREATE, sizeof(*req)); | 
 |  | 
 | 	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size)); | 
 |  | 
 | 	AMAP_SET_BITS(struct amap_eq_context, func, req->context, | 
 | 						PCI_FUNC(ctrl->pdev->devfn)); | 
 | 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1); | 
 | 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0); | 
 | 	AMAP_SET_BITS(struct amap_eq_context, count, req->context, | 
 | 					__ilog2_u32(eq->len / 256)); | 
 | 	AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context, | 
 | 					eq_delay_to_mult(eq_delay)); | 
 | 	be_dws_cpu_to_le(req->context, sizeof(req->context)); | 
 |  | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		eq->id = le16_to_cpu(resp->eq_id); | 
 | 		eq->created = true; | 
 | 	} | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl, | 
 | 			  struct be_queue_info *cq, struct be_queue_info *eq, | 
 | 			  bool sol_evts, bool no_delay, int coalesce_wm) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_cmd_req_cq_create *req = embedded_payload(wrb); | 
 | 	struct be_cmd_resp_cq_create *resp = embedded_payload(wrb); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	struct be_dma_mem *q_mem = &cq->dma_mem; | 
 | 	void *ctxt = &req->context; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			OPCODE_COMMON_CQ_CREATE, sizeof(*req)); | 
 |  | 
 | 	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size)); | 
 | 	if (is_chip_be2_be3r(phba)) { | 
 | 		AMAP_SET_BITS(struct amap_cq_context, coalescwm, | 
 | 			      ctxt, coalesce_wm); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, count, ctxt, | 
 | 			      __ilog2_u32(cq->len / 256)); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_cq_context, func, ctxt, | 
 | 			      PCI_FUNC(ctrl->pdev->devfn)); | 
 | 	} else { | 
 | 		req->hdr.version = MBX_CMD_VER2; | 
 | 		req->page_size = 1; | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, | 
 | 			      ctxt, coalesce_wm); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, | 
 | 			      ctxt, no_delay); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, | 
 | 			      __ilog2_u32(cq->len / 256)); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, valid, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, eventable, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, eqid, ctxt, eq->id); | 
 | 		AMAP_SET_BITS(struct amap_cq_context_v2, armed, ctxt, 1); | 
 | 	} | 
 |  | 
 | 	be_dws_cpu_to_le(ctxt, sizeof(req->context)); | 
 |  | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		cq->id = le16_to_cpu(resp->cq_id); | 
 | 		cq->created = true; | 
 | 	} else | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BC_%d : In be_cmd_cq_create, status=ox%08x\n", | 
 | 			    status); | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static u32 be_encoded_q_len(int q_len) | 
 | { | 
 | 	u32 len_encoded = fls(q_len);	/* log2(len) + 1 */ | 
 | 	if (len_encoded == 16) | 
 | 		len_encoded = 0; | 
 | 	return len_encoded; | 
 | } | 
 |  | 
 | int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba, | 
 | 			struct be_queue_info *mccq, | 
 | 			struct be_queue_info *cq) | 
 | { | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	struct be_cmd_req_mcc_create_ext *req; | 
 | 	struct be_dma_mem *q_mem = &mccq->dma_mem; | 
 | 	struct be_ctrl_info *ctrl; | 
 | 	void *ctxt; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&phba->ctrl.mbox_lock); | 
 | 	ctrl = &phba->ctrl; | 
 | 	wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	req = embedded_payload(wrb); | 
 | 	ctxt = &req->context; | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req)); | 
 |  | 
 | 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); | 
 | 	req->async_evt_bitmap = 1 << ASYNC_EVENT_CODE_LINK_STATE; | 
 | 	req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_ISCSI; | 
 | 	req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_SLI; | 
 |  | 
 | 	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, | 
 | 		      PCI_FUNC(phba->pcidev->devfn)); | 
 | 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1); | 
 | 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt, | 
 | 		be_encoded_q_len(mccq->len)); | 
 | 	AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id); | 
 |  | 
 | 	be_dws_cpu_to_le(ctxt, sizeof(req->context)); | 
 |  | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb); | 
 | 		mccq->id = le16_to_cpu(resp->id); | 
 | 		mccq->created = true; | 
 | 	} | 
 | 	mutex_unlock(&phba->ctrl.mbox_lock); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q, | 
 | 			  int queue_type) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_cmd_req_q_destroy *req = embedded_payload(wrb); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	u8 subsys = 0, opcode = 0; | 
 | 	int status; | 
 |  | 
 | 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 		    "BC_%d : In beiscsi_cmd_q_destroy " | 
 | 		    "queue_type : %d\n", queue_type); | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	switch (queue_type) { | 
 | 	case QTYPE_EQ: | 
 | 		subsys = CMD_SUBSYSTEM_COMMON; | 
 | 		opcode = OPCODE_COMMON_EQ_DESTROY; | 
 | 		break; | 
 | 	case QTYPE_CQ: | 
 | 		subsys = CMD_SUBSYSTEM_COMMON; | 
 | 		opcode = OPCODE_COMMON_CQ_DESTROY; | 
 | 		break; | 
 | 	case QTYPE_MCCQ: | 
 | 		subsys = CMD_SUBSYSTEM_COMMON; | 
 | 		opcode = OPCODE_COMMON_MCC_DESTROY; | 
 | 		break; | 
 | 	case QTYPE_WRBQ: | 
 | 		subsys = CMD_SUBSYSTEM_ISCSI; | 
 | 		opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY; | 
 | 		break; | 
 | 	case QTYPE_DPDUQ: | 
 | 		subsys = CMD_SUBSYSTEM_ISCSI; | 
 | 		opcode = OPCODE_COMMON_ISCSI_DEFQ_DESTROY; | 
 | 		break; | 
 | 	case QTYPE_SGL: | 
 | 		subsys = CMD_SUBSYSTEM_ISCSI; | 
 | 		opcode = OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES; | 
 | 		break; | 
 | 	default: | 
 | 		mutex_unlock(&ctrl->mbox_lock); | 
 | 		BUG(); | 
 | 	} | 
 | 	be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req)); | 
 | 	if (queue_type != QTYPE_SGL) | 
 | 		req->id = cpu_to_le16(q->id); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | /** | 
 |  * be_cmd_create_default_pdu_queue()- Create DEFQ for the adapter | 
 |  * @ctrl: ptr to ctrl_info | 
 |  * @cq: Completion Queue | 
 |  * @dq: Default Queue | 
 |  * @length: ring size | 
 |  * @entry_size: size of each entry in DEFQ | 
 |  * @is_header: Header or Data DEFQ | 
 |  * @ulp_num: Bind to which ULP | 
 |  * | 
 |  * Create HDR/Data DEFQ for the passed ULP. Unsol PDU are posted | 
 |  * on this queue by the FW | 
 |  * | 
 |  * return | 
 |  *	Success: 0 | 
 |  *	Failure: Non-Zero Value | 
 |  * | 
 |  **/ | 
 | int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl, | 
 | 				    struct be_queue_info *cq, | 
 | 				    struct be_queue_info *dq, int length, | 
 | 				    int entry_size, uint8_t is_header, | 
 | 				    uint8_t ulp_num) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_defq_create_req *req = embedded_payload(wrb); | 
 | 	struct be_dma_mem *q_mem = &dq->dma_mem; | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	void *ctxt = &req->context; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 			   OPCODE_COMMON_ISCSI_DEFQ_CREATE, sizeof(*req)); | 
 |  | 
 | 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); | 
 | 	if (phba->fw_config.dual_ulp_aware) { | 
 | 		req->ulp_num = ulp_num; | 
 | 		req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT); | 
 | 		req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT); | 
 | 	} | 
 |  | 
 | 	if (is_chip_be2_be3r(phba)) { | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      rx_pdid, ctxt, 0); | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      rx_pdid_valid, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      pci_func_id, ctxt, PCI_FUNC(ctrl->pdev->devfn)); | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      ring_size, ctxt, | 
 | 			      be_encoded_q_len(length / | 
 | 			      sizeof(struct phys_addr))); | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      default_buffer_size, ctxt, entry_size); | 
 | 		AMAP_SET_BITS(struct amap_be_default_pdu_context, | 
 | 			      cq_id_recv, ctxt,	cq->id); | 
 | 	} else { | 
 | 		AMAP_SET_BITS(struct amap_default_pdu_context_ext, | 
 | 			      rx_pdid, ctxt, 0); | 
 | 		AMAP_SET_BITS(struct amap_default_pdu_context_ext, | 
 | 			      rx_pdid_valid, ctxt, 1); | 
 | 		AMAP_SET_BITS(struct amap_default_pdu_context_ext, | 
 | 			      ring_size, ctxt, | 
 | 			      be_encoded_q_len(length / | 
 | 			      sizeof(struct phys_addr))); | 
 | 		AMAP_SET_BITS(struct amap_default_pdu_context_ext, | 
 | 			      default_buffer_size, ctxt, entry_size); | 
 | 		AMAP_SET_BITS(struct amap_default_pdu_context_ext, | 
 | 			      cq_id_recv, ctxt, cq->id); | 
 | 	} | 
 |  | 
 | 	be_dws_cpu_to_le(ctxt, sizeof(req->context)); | 
 |  | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		struct be_ring *defq_ring; | 
 | 		struct be_defq_create_resp *resp = embedded_payload(wrb); | 
 |  | 
 | 		dq->id = le16_to_cpu(resp->id); | 
 | 		dq->created = true; | 
 | 		if (is_header) | 
 | 			defq_ring = &phba->phwi_ctrlr->default_pdu_hdr[ulp_num]; | 
 | 		else | 
 | 			defq_ring = &phba->phwi_ctrlr-> | 
 | 				    default_pdu_data[ulp_num]; | 
 |  | 
 | 		defq_ring->id = dq->id; | 
 |  | 
 | 		if (!phba->fw_config.dual_ulp_aware) { | 
 | 			defq_ring->ulp_num = BEISCSI_ULP0; | 
 | 			defq_ring->doorbell_offset = DB_RXULP0_OFFSET; | 
 | 		} else { | 
 | 			defq_ring->ulp_num = resp->ulp_num; | 
 | 			defq_ring->doorbell_offset = resp->doorbell_offset; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /** | 
 |  * be_cmd_wrbq_create()- Create WRBQ | 
 |  * @ctrl: ptr to ctrl_info | 
 |  * @q_mem: memory details for the queue | 
 |  * @wrbq: queue info | 
 |  * @pwrb_context: ptr to wrb_context | 
 |  * @ulp_num: ULP on which the WRBQ is to be created | 
 |  * | 
 |  * Create WRBQ on the passed ULP_NUM. | 
 |  * | 
 |  **/ | 
 | int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, | 
 | 			struct be_dma_mem *q_mem, | 
 | 			struct be_queue_info *wrbq, | 
 | 			struct hwi_wrb_context *pwrb_context, | 
 | 			uint8_t ulp_num) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_wrbq_create_req *req = embedded_payload(wrb); | 
 | 	struct be_wrbq_create_resp *resp = embedded_payload(wrb); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 		OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req)); | 
 | 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); | 
 |  | 
 | 	if (phba->fw_config.dual_ulp_aware) { | 
 | 		req->ulp_num = ulp_num; | 
 | 		req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT); | 
 | 		req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT); | 
 | 	} | 
 |  | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		wrbq->id = le16_to_cpu(resp->cid); | 
 | 		wrbq->created = true; | 
 |  | 
 | 		pwrb_context->cid = wrbq->id; | 
 | 		if (!phba->fw_config.dual_ulp_aware) { | 
 | 			pwrb_context->doorbell_offset = DB_TXULP0_OFFSET; | 
 | 			pwrb_context->ulp_num = BEISCSI_ULP0; | 
 | 		} else { | 
 | 			pwrb_context->ulp_num = resp->ulp_num; | 
 | 			pwrb_context->doorbell_offset = resp->doorbell_offset; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int be_cmd_iscsi_post_template_hdr(struct be_ctrl_info *ctrl, | 
 | 				    struct be_dma_mem *q_mem) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_post_template_pages_req *req = embedded_payload(wrb); | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 |  | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS, | 
 | 			   sizeof(*req)); | 
 |  | 
 | 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); | 
 | 	req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI; | 
 | 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int be_cmd_iscsi_remove_template_hdr(struct be_ctrl_info *ctrl) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_remove_template_pages_req *req = embedded_payload(wrb); | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 |  | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS, | 
 | 			   sizeof(*req)); | 
 |  | 
 | 	req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI; | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl, | 
 | 				struct be_dma_mem *q_mem, | 
 | 				u32 page_offset, u32 num_pages) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_post_sgl_pages_req *req = embedded_payload(wrb); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	int status; | 
 | 	unsigned int curr_pages; | 
 | 	u32 temp_num_pages = num_pages; | 
 |  | 
 | 	if (num_pages == 0xff) | 
 | 		num_pages = 1; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	do { | 
 | 		memset(wrb, 0, sizeof(*wrb)); | 
 | 		be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 | 		be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 				   OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES, | 
 | 				   sizeof(*req)); | 
 | 		curr_pages = BE_NUMBER_OF_FIELD(struct be_post_sgl_pages_req, | 
 | 						pages); | 
 | 		req->num_pages = min(num_pages, curr_pages); | 
 | 		req->page_offset = page_offset; | 
 | 		be_cmd_page_addrs_prepare(req->pages, req->num_pages, q_mem); | 
 | 		q_mem->dma = q_mem->dma + (req->num_pages * PAGE_SIZE); | 
 | 		page_offset += req->num_pages; | 
 | 		num_pages -= req->num_pages; | 
 |  | 
 | 		if (temp_num_pages == 0xff) | 
 | 			req->num_pages = temp_num_pages; | 
 |  | 
 | 		status = be_mbox_notify(ctrl); | 
 | 		if (status) { | 
 | 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 				    "BC_%d : FW CMD to map iscsi frags failed.\n"); | 
 |  | 
 | 			goto error; | 
 | 		} | 
 | 	} while (num_pages > 0); | 
 | error: | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	if (status != 0) | 
 | 		beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL); | 
 | 	return status; | 
 | } | 
 |  | 
 | /** | 
 |  * be_cmd_set_vlan()- Configure VLAN paramters on the adapter | 
 |  * @phba: device priv structure instance | 
 |  * @vlan_tag: TAG to be set | 
 |  * | 
 |  * Set the VLAN_TAG for the adapter or Disable VLAN on adapter | 
 |  * | 
 |  * returns | 
 |  *	TAG for the MBX Cmd | 
 |  * **/ | 
 | int be_cmd_set_vlan(struct beiscsi_hba *phba, | 
 | 		     uint16_t vlan_tag) | 
 | { | 
 | 	unsigned int tag; | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	struct be_cmd_set_vlan_req *req; | 
 | 	struct be_ctrl_info *ctrl = &phba->ctrl; | 
 |  | 
 | 	if (mutex_lock_interruptible(&ctrl->mbox_lock)) | 
 | 		return 0; | 
 | 	wrb = alloc_mcc_wrb(phba, &tag); | 
 | 	if (!wrb) { | 
 | 		mutex_unlock(&ctrl->mbox_lock); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	req = embedded_payload(wrb); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*wrb), true, 0); | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 			   OPCODE_COMMON_ISCSI_NTWK_SET_VLAN, | 
 | 			   sizeof(*req)); | 
 |  | 
 | 	req->interface_hndl = phba->interface_handle; | 
 | 	req->vlan_priority = vlan_tag; | 
 |  | 
 | 	be_mcc_notify(phba, tag); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 |  | 
 | 	return tag; | 
 | } | 
 |  | 
 | int beiscsi_check_supported_fw(struct be_ctrl_info *ctrl, | 
 | 			       struct beiscsi_hba *phba) | 
 | { | 
 | 	struct be_dma_mem nonemb_cmd; | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_mgmt_controller_attributes *req; | 
 | 	struct be_sge *sge = nonembedded_sgl(wrb); | 
 | 	int status = 0; | 
 |  | 
 | 	nonemb_cmd.va = dma_alloc_coherent(&ctrl->pdev->dev, | 
 | 				sizeof(struct be_mgmt_controller_attributes), | 
 | 				&nonemb_cmd.dma, GFP_KERNEL); | 
 | 	if (nonemb_cmd.va == NULL) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : dma_alloc_coherent failed in %s\n", | 
 | 			    __func__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	nonemb_cmd.size = sizeof(struct be_mgmt_controller_attributes); | 
 | 	req = nonemb_cmd.va; | 
 | 	memset(req, 0, sizeof(*req)); | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1); | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_GET_CNTL_ATTRIBUTES, sizeof(*req)); | 
 | 	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma)); | 
 | 	sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF); | 
 | 	sge->len = cpu_to_le32(nonemb_cmd.size); | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (!status) { | 
 | 		struct be_mgmt_controller_attributes_resp *resp = nonemb_cmd.va; | 
 |  | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : Firmware Version of CMD : %s\n" | 
 | 			    "Firmware Version is : %s\n" | 
 | 			    "Developer Build, not performing version check...\n", | 
 | 			    resp->params.hba_attribs | 
 | 			    .flashrom_version_string, | 
 | 			    resp->params.hba_attribs. | 
 | 			    firmware_version_string); | 
 |  | 
 | 		phba->fw_config.iscsi_features = | 
 | 				resp->params.hba_attribs.iscsi_features; | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BM_%d : phba->fw_config.iscsi_features = %d\n", | 
 | 			    phba->fw_config.iscsi_features); | 
 | 		memcpy(phba->fw_ver_str, resp->params.hba_attribs. | 
 | 		       firmware_version_string, BEISCSI_VER_STRLEN); | 
 | 	} else | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d :  Failed in beiscsi_check_supported_fw\n"); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	if (nonemb_cmd.va) | 
 | 		dma_free_coherent(&ctrl->pdev->dev, nonemb_cmd.size, | 
 | 				    nonemb_cmd.va, nonemb_cmd.dma); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /** | 
 |  * beiscsi_get_fw_config()- Get the FW config for the function | 
 |  * @ctrl: ptr to Ctrl Info | 
 |  * @phba: ptr to the dev priv structure | 
 |  * | 
 |  * Get the FW config and resources available for the function. | 
 |  * The resources are created based on the count received here. | 
 |  * | 
 |  * return | 
 |  *	Success: 0 | 
 |  *	Failure: Non-Zero Value | 
 |  **/ | 
 | int beiscsi_get_fw_config(struct be_ctrl_info *ctrl, | 
 | 			  struct beiscsi_hba *phba) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_fw_cfg *pfw_cfg = embedded_payload(wrb); | 
 | 	uint32_t cid_count, icd_count; | 
 | 	int status = -EINVAL; | 
 | 	uint8_t ulp_num = 0; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*pfw_cfg), true, 0); | 
 |  | 
 | 	be_cmd_hdr_prepare(&pfw_cfg->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, | 
 | 			   EMBED_MBX_MAX_PAYLOAD_SIZE); | 
 |  | 
 | 	if (be_mbox_notify(ctrl)) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : Failed in beiscsi_get_fw_config\n"); | 
 | 		goto fail_init; | 
 | 	} | 
 |  | 
 | 	/* FW response formats depend on port id */ | 
 | 	phba->fw_config.phys_port = pfw_cfg->phys_port; | 
 | 	if (phba->fw_config.phys_port >= BEISCSI_PHYS_PORT_MAX) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : invalid physical port id %d\n", | 
 | 			    phba->fw_config.phys_port); | 
 | 		goto fail_init; | 
 | 	} | 
 |  | 
 | 	/* populate and check FW config against min and max values */ | 
 | 	if (!is_chip_be2_be3r(phba)) { | 
 | 		phba->fw_config.eqid_count = pfw_cfg->eqid_count; | 
 | 		phba->fw_config.cqid_count = pfw_cfg->cqid_count; | 
 | 		if (phba->fw_config.eqid_count == 0 || | 
 | 		    phba->fw_config.eqid_count > 2048) { | 
 | 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 				    "BG_%d : invalid EQ count %d\n", | 
 | 				    phba->fw_config.eqid_count); | 
 | 			goto fail_init; | 
 | 		} | 
 | 		if (phba->fw_config.cqid_count == 0 || | 
 | 		    phba->fw_config.cqid_count > 4096) { | 
 | 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 				    "BG_%d : invalid CQ count %d\n", | 
 | 				    phba->fw_config.cqid_count); | 
 | 			goto fail_init; | 
 | 		} | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : EQ_Count : %d CQ_Count : %d\n", | 
 | 			    phba->fw_config.eqid_count, | 
 | 			    phba->fw_config.cqid_count); | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * Check on which all ULP iSCSI Protocol is loaded. | 
 | 	 * Set the Bit for those ULP. This set flag is used | 
 | 	 * at all places in the code to check on which ULP | 
 | 	 * iSCSi Protocol is loaded | 
 | 	 **/ | 
 | 	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) { | 
 | 		if (pfw_cfg->ulp[ulp_num].ulp_mode & | 
 | 		    BEISCSI_ULP_ISCSI_INI_MODE) { | 
 | 			set_bit(ulp_num, &phba->fw_config.ulp_supported); | 
 |  | 
 | 			/* Get the CID, ICD and Chain count for each ULP */ | 
 | 			phba->fw_config.iscsi_cid_start[ulp_num] = | 
 | 				pfw_cfg->ulp[ulp_num].sq_base; | 
 | 			phba->fw_config.iscsi_cid_count[ulp_num] = | 
 | 				pfw_cfg->ulp[ulp_num].sq_count; | 
 |  | 
 | 			phba->fw_config.iscsi_icd_start[ulp_num] = | 
 | 				pfw_cfg->ulp[ulp_num].icd_base; | 
 | 			phba->fw_config.iscsi_icd_count[ulp_num] = | 
 | 				pfw_cfg->ulp[ulp_num].icd_count; | 
 |  | 
 | 			phba->fw_config.iscsi_chain_start[ulp_num] = | 
 | 				pfw_cfg->chain_icd[ulp_num].chain_base; | 
 | 			phba->fw_config.iscsi_chain_count[ulp_num] = | 
 | 				pfw_cfg->chain_icd[ulp_num].chain_count; | 
 |  | 
 | 			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 				    "BG_%d : Function loaded on ULP : %d\n" | 
 | 				    "\tiscsi_cid_count : %d\n" | 
 | 				    "\tiscsi_cid_start : %d\n" | 
 | 				    "\t iscsi_icd_count : %d\n" | 
 | 				    "\t iscsi_icd_start : %d\n", | 
 | 				    ulp_num, | 
 | 				    phba->fw_config. | 
 | 				    iscsi_cid_count[ulp_num], | 
 | 				    phba->fw_config. | 
 | 				    iscsi_cid_start[ulp_num], | 
 | 				    phba->fw_config. | 
 | 				    iscsi_icd_count[ulp_num], | 
 | 				    phba->fw_config. | 
 | 				    iscsi_icd_start[ulp_num]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (phba->fw_config.ulp_supported == 0) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : iSCSI initiator mode not set: ULP0 %x ULP1 %x\n", | 
 | 			    pfw_cfg->ulp[BEISCSI_ULP0].ulp_mode, | 
 | 			    pfw_cfg->ulp[BEISCSI_ULP1].ulp_mode); | 
 | 		goto fail_init; | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * ICD is shared among ULPs. Use icd_count of any one loaded ULP | 
 | 	 **/ | 
 | 	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) | 
 | 		if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) | 
 | 			break; | 
 | 	icd_count = phba->fw_config.iscsi_icd_count[ulp_num]; | 
 | 	if (icd_count == 0 || icd_count > 65536) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d: invalid ICD count %d\n", icd_count); | 
 | 		goto fail_init; | 
 | 	} | 
 |  | 
 | 	cid_count = BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP0) + | 
 | 		    BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP1); | 
 | 	if (cid_count == 0 || cid_count > 4096) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d: invalid CID count %d\n", cid_count); | 
 | 		goto fail_init; | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * Check FW is dual ULP aware i.e. can handle either | 
 | 	 * of the protocols. | 
 | 	 */ | 
 | 	phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode & | 
 | 					  BEISCSI_FUNC_DUA_MODE); | 
 |  | 
 | 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 		    "BG_%d : DUA Mode : 0x%x\n", | 
 | 		    phba->fw_config.dual_ulp_aware); | 
 |  | 
 | 	/* all set, continue using this FW config */ | 
 | 	status = 0; | 
 | fail_init: | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | /** | 
 |  * beiscsi_get_port_name()- Get port name for the function | 
 |  * @ctrl: ptr to Ctrl Info | 
 |  * @phba: ptr to the dev priv structure | 
 |  * | 
 |  * Get the alphanumeric character for port | 
 |  * | 
 |  **/ | 
 | int beiscsi_get_port_name(struct be_ctrl_info *ctrl, struct beiscsi_hba *phba) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	struct be_cmd_get_port_name *ioctl; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	ioctl = embedded_payload(wrb); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*ioctl), true, 0); | 
 | 	be_cmd_hdr_prepare(&ioctl->h.req_hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_GET_PORT_NAME, | 
 | 			   EMBED_MBX_MAX_PAYLOAD_SIZE); | 
 | 	ret = be_mbox_notify(ctrl); | 
 | 	phba->port_name = 0; | 
 | 	if (!ret) { | 
 | 		phba->port_name = ioctl->p.resp.port_names >> | 
 | 				  (phba->fw_config.phys_port * 8) & 0xff; | 
 | 	} else { | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : GET_PORT_NAME ret 0x%x status 0x%x\n", | 
 | 			    ret, ioctl->h.resp_hdr.status); | 
 | 	} | 
 |  | 
 | 	if (phba->port_name == 0) | 
 | 		phba->port_name = '?'; | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int beiscsi_set_host_data(struct beiscsi_hba *phba) | 
 | { | 
 | 	struct be_ctrl_info *ctrl = &phba->ctrl; | 
 | 	struct be_cmd_set_host_data *ioctl; | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (is_chip_be2_be3r(phba)) | 
 | 		return ret; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	ioctl = embedded_payload(wrb); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*ioctl), true, 0); | 
 | 	be_cmd_hdr_prepare(&ioctl->h.req_hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_SET_HOST_DATA, | 
 | 			   EMBED_MBX_MAX_PAYLOAD_SIZE); | 
 | 	ioctl->param.req.param_id = BE_CMD_SET_HOST_PARAM_ID; | 
 | 	ioctl->param.req.param_len = | 
 | 		snprintf((char *)ioctl->param.req.param_data, | 
 | 			 sizeof(ioctl->param.req.param_data), | 
 | 			 "Linux iSCSI v%s", BUILD_STR); | 
 | 	ioctl->param.req.param_len = ALIGN(ioctl->param.req.param_len + 1, 4); | 
 | 	if (ioctl->param.req.param_len > BE_CMD_MAX_DRV_VERSION) | 
 | 		ioctl->param.req.param_len = BE_CMD_MAX_DRV_VERSION; | 
 | 	ret = be_mbox_notify(ctrl); | 
 | 	if (!ret) { | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : HBA set host driver version\n"); | 
 | 	} else { | 
 | 		/** | 
 | 		 * Check "MCC_STATUS_INVALID_LENGTH" for SKH. | 
 | 		 * Older FW versions return this error. | 
 | 		 */ | 
 | 		if (ret == MCC_STATUS_ILLEGAL_REQUEST || | 
 | 				ret == MCC_STATUS_INVALID_LENGTH) | 
 | 			__beiscsi_log(phba, KERN_INFO, | 
 | 				      "BG_%d : HBA failed to set host driver version\n"); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int beiscsi_set_uer_feature(struct beiscsi_hba *phba) | 
 | { | 
 | 	struct be_ctrl_info *ctrl = &phba->ctrl; | 
 | 	struct be_cmd_set_features *ioctl; | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	int ret = 0; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 | 	ioctl = embedded_payload(wrb); | 
 |  | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*ioctl), true, 0); | 
 | 	be_cmd_hdr_prepare(&ioctl->h.req_hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_SET_FEATURES, | 
 | 			   EMBED_MBX_MAX_PAYLOAD_SIZE); | 
 | 	ioctl->feature = BE_CMD_SET_FEATURE_UER; | 
 | 	ioctl->param_len = sizeof(ioctl->param.req); | 
 | 	ioctl->param.req.uer = BE_CMD_UER_SUPP_BIT; | 
 | 	ret = be_mbox_notify(ctrl); | 
 | 	if (!ret) { | 
 | 		phba->ue2rp = ioctl->param.resp.ue2rp; | 
 | 		set_bit(BEISCSI_HBA_UER_SUPP, &phba->state); | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : HBA error recovery supported\n"); | 
 | 	} else { | 
 | 		/** | 
 | 		 * Check "MCC_STATUS_INVALID_LENGTH" for SKH. | 
 | 		 * Older FW versions return this error. | 
 | 		 */ | 
 | 		if (ret == MCC_STATUS_ILLEGAL_REQUEST || | 
 | 		    ret == MCC_STATUS_INVALID_LENGTH) | 
 | 			__beiscsi_log(phba, KERN_INFO, | 
 | 				      "BG_%d : HBA error recovery not supported\n"); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static u32 beiscsi_get_post_stage(struct beiscsi_hba *phba) | 
 | { | 
 | 	u32 sem; | 
 |  | 
 | 	if (is_chip_be2_be3r(phba)) | 
 | 		sem = ioread32(phba->csr_va + SLIPORT_SEMAPHORE_OFFSET_BEx); | 
 | 	else | 
 | 		pci_read_config_dword(phba->pcidev, | 
 | 				      SLIPORT_SEMAPHORE_OFFSET_SH, &sem); | 
 | 	return sem; | 
 | } | 
 |  | 
 | int beiscsi_check_fw_rdy(struct beiscsi_hba *phba) | 
 | { | 
 | 	u32 loop, post, rdy = 0; | 
 |  | 
 | 	loop = 1000; | 
 | 	while (loop--) { | 
 | 		post = beiscsi_get_post_stage(phba); | 
 | 		if (post & POST_ERROR_BIT) | 
 | 			break; | 
 | 		if ((post & POST_STAGE_MASK) == POST_STAGE_ARMFW_RDY) { | 
 | 			rdy = 1; | 
 | 			break; | 
 | 		} | 
 | 		msleep(60); | 
 | 	} | 
 |  | 
 | 	if (!rdy) { | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			      "BC_%d : FW not ready 0x%x\n", post); | 
 | 	} | 
 |  | 
 | 	return rdy; | 
 | } | 
 |  | 
 | int beiscsi_cmd_function_reset(struct beiscsi_hba *phba) | 
 | { | 
 | 	struct be_ctrl_info *ctrl = &phba->ctrl; | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct be_post_sgl_pages_req *req; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 |  | 
 | 	req = embedded_payload(wrb); | 
 | 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 | 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, | 
 | 			   OPCODE_COMMON_FUNCTION_RESET, sizeof(*req)); | 
 | 	status = be_mbox_notify(ctrl); | 
 |  | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int beiscsi_cmd_special_wrb(struct be_ctrl_info *ctrl, u32 load) | 
 | { | 
 | 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 | 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); | 
 | 	u8 *endian_check; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	memset(wrb, 0, sizeof(*wrb)); | 
 |  | 
 | 	endian_check = (u8 *) wrb; | 
 | 	if (load) { | 
 | 		/* to start communicating */ | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0x12; | 
 | 		*endian_check++ = 0x34; | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0x56; | 
 | 		*endian_check++ = 0x78; | 
 | 		*endian_check++ = 0xFF; | 
 | 	} else { | 
 | 		/* to stop communicating */ | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0xAA; | 
 | 		*endian_check++ = 0xBB; | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0xFF; | 
 | 		*endian_check++ = 0xCC; | 
 | 		*endian_check++ = 0xDD; | 
 | 		*endian_check = 0xFF; | 
 | 	} | 
 | 	be_dws_cpu_to_le(wrb, sizeof(*wrb)); | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (status) | 
 | 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, | 
 | 			    "BC_%d : special WRB message failed\n"); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | int beiscsi_init_sliport(struct beiscsi_hba *phba) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	/* check POST stage before talking to FW */ | 
 | 	status = beiscsi_check_fw_rdy(phba); | 
 | 	if (!status) | 
 | 		return -EIO; | 
 |  | 
 | 	/* clear all error states after checking FW rdy */ | 
 | 	phba->state &= ~BEISCSI_HBA_IN_ERR; | 
 |  | 
 | 	/* check again UER support */ | 
 | 	phba->state &= ~BEISCSI_HBA_UER_SUPP; | 
 |  | 
 | 	/* | 
 | 	 * SLI COMMON_FUNCTION_RESET completion is indicated by BMBX RDY bit. | 
 | 	 * It should clean up any stale info in FW for this fn. | 
 | 	 */ | 
 | 	status = beiscsi_cmd_function_reset(phba); | 
 | 	if (status) { | 
 | 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, | 
 | 			    "BC_%d : SLI Function Reset failed\n"); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	/* indicate driver is loading */ | 
 | 	return beiscsi_cmd_special_wrb(&phba->ctrl, 1); | 
 | } | 
 |  | 
 | /** | 
 |  * beiscsi_cmd_iscsi_cleanup()- Inform FW to cleanup EP data structures. | 
 |  * @phba: pointer to dev priv structure | 
 |  * @ulp: ULP number. | 
 |  * | 
 |  * return | 
 |  *	Success: 0 | 
 |  *	Failure: Non-Zero Value | 
 |  **/ | 
 | int beiscsi_cmd_iscsi_cleanup(struct beiscsi_hba *phba, unsigned short ulp) | 
 | { | 
 | 	struct be_ctrl_info *ctrl = &phba->ctrl; | 
 | 	struct iscsi_cleanup_req_v1 *req_v1; | 
 | 	struct iscsi_cleanup_req *req; | 
 | 	u16 hdr_ring_id, data_ring_id; | 
 | 	struct be_mcc_wrb *wrb; | 
 | 	int status; | 
 |  | 
 | 	mutex_lock(&ctrl->mbox_lock); | 
 | 	wrb = wrb_from_mbox(&ctrl->mbox_mem); | 
 |  | 
 | 	hdr_ring_id = HWI_GET_DEF_HDRQ_ID(phba, ulp); | 
 | 	data_ring_id = HWI_GET_DEF_BUFQ_ID(phba, ulp); | 
 | 	if (is_chip_be2_be3r(phba)) { | 
 | 		req = embedded_payload(wrb); | 
 | 		be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); | 
 | 		be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 				   OPCODE_COMMON_ISCSI_CLEANUP, sizeof(*req)); | 
 | 		req->chute = (1 << ulp); | 
 | 		/* BE2/BE3 FW creates 8-bit ring id */ | 
 | 		req->hdr_ring_id = hdr_ring_id; | 
 | 		req->data_ring_id = data_ring_id; | 
 | 	} else { | 
 | 		req_v1 = embedded_payload(wrb); | 
 | 		be_wrb_hdr_prepare(wrb, sizeof(*req_v1), true, 0); | 
 | 		be_cmd_hdr_prepare(&req_v1->hdr, CMD_SUBSYSTEM_ISCSI, | 
 | 				   OPCODE_COMMON_ISCSI_CLEANUP, | 
 | 				   sizeof(*req_v1)); | 
 | 		req_v1->hdr.version = 1; | 
 | 		req_v1->chute = (1 << ulp); | 
 | 		req_v1->hdr_ring_id = cpu_to_le16(hdr_ring_id); | 
 | 		req_v1->data_ring_id = cpu_to_le16(data_ring_id); | 
 | 	} | 
 |  | 
 | 	status = be_mbox_notify(ctrl); | 
 | 	if (status) | 
 | 		beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_INIT, | 
 | 			    "BG_%d : %s failed %d\n", __func__, ulp); | 
 | 	mutex_unlock(&ctrl->mbox_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | /* | 
 |  * beiscsi_detect_ue()- Detect Unrecoverable Error on adapter | 
 |  * @phba: Driver priv structure | 
 |  * | 
 |  * Read registers linked to UE and check for the UE status | 
 |  **/ | 
 | int beiscsi_detect_ue(struct beiscsi_hba *phba) | 
 | { | 
 | 	uint32_t ue_mask_hi = 0, ue_mask_lo = 0; | 
 | 	uint32_t ue_hi = 0, ue_lo = 0; | 
 | 	uint8_t i = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	pci_read_config_dword(phba->pcidev, | 
 | 			      PCICFG_UE_STATUS_LOW, &ue_lo); | 
 | 	pci_read_config_dword(phba->pcidev, | 
 | 			      PCICFG_UE_STATUS_MASK_LOW, | 
 | 			      &ue_mask_lo); | 
 | 	pci_read_config_dword(phba->pcidev, | 
 | 			      PCICFG_UE_STATUS_HIGH, | 
 | 			      &ue_hi); | 
 | 	pci_read_config_dword(phba->pcidev, | 
 | 			      PCICFG_UE_STATUS_MASK_HI, | 
 | 			      &ue_mask_hi); | 
 |  | 
 | 	ue_lo = (ue_lo & ~ue_mask_lo); | 
 | 	ue_hi = (ue_hi & ~ue_mask_hi); | 
 |  | 
 |  | 
 | 	if (ue_lo || ue_hi) { | 
 | 		set_bit(BEISCSI_HBA_IN_UE, &phba->state); | 
 | 		__beiscsi_log(phba, KERN_ERR, | 
 | 			      "BC_%d : HBA error detected\n"); | 
 | 		ret = 1; | 
 | 	} | 
 |  | 
 | 	if (ue_lo) { | 
 | 		for (i = 0; ue_lo; ue_lo >>= 1, i++) { | 
 | 			if (ue_lo & 1) | 
 | 				__beiscsi_log(phba, KERN_ERR, | 
 | 					      "BC_%d : UE_LOW %s bit set\n", | 
 | 					      desc_ue_status_low[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ue_hi) { | 
 | 		for (i = 0; ue_hi; ue_hi >>= 1, i++) { | 
 | 			if (ue_hi & 1) | 
 | 				__beiscsi_log(phba, KERN_ERR, | 
 | 					      "BC_%d : UE_HIGH %s bit set\n", | 
 | 					      desc_ue_status_hi[i]); | 
 | 		} | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * beiscsi_detect_tpe()- Detect Transient Parity Error on adapter | 
 |  * @phba: Driver priv structure | 
 |  * | 
 |  * Read SLIPORT SEMAPHORE register to check for UER | 
 |  * | 
 |  **/ | 
 | int beiscsi_detect_tpe(struct beiscsi_hba *phba) | 
 | { | 
 | 	u32 post, status; | 
 | 	int ret = 0; | 
 |  | 
 | 	post = beiscsi_get_post_stage(phba); | 
 | 	status = post & POST_STAGE_MASK; | 
 | 	if ((status & POST_ERR_RECOVERY_CODE_MASK) == | 
 | 	    POST_STAGE_RECOVERABLE_ERR) { | 
 | 		set_bit(BEISCSI_HBA_IN_TPE, &phba->state); | 
 | 		__beiscsi_log(phba, KERN_INFO, | 
 | 			      "BC_%d : HBA error recoverable: 0x%x\n", post); | 
 | 		ret = 1; | 
 | 	} else { | 
 | 		__beiscsi_log(phba, KERN_INFO, | 
 | 			      "BC_%d : HBA in UE: 0x%x\n", post); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } |