blob: b4e021ea30f9ce3e00d4f06cac8dc2e3c7681939 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
config DRM_PANEL
bool
depends on DRM
help
Panel registration and lookup framework.
menu "Display Panels"
depends on DRM && DRM_PANEL
config DRM_PANEL_ABT_Y030XX067A
tristate "ABT Y030XX067A 320x480 LCD panel"
depends on OF && SPI
select REGMAP_SPI
help
Say Y here to enable support for the Asia Better Technology Ltd.
Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
and RG-99 handheld gaming consoles.
config DRM_PANEL_ARM_VERSATILE
tristate "ARM Versatile panel driver"
depends on OF
depends on MFD_SYSCON
select VIDEOMODE_HELPERS
help
This driver supports the ARM Versatile panels connected to ARM
reference designs. The panel is detected using special registers
in the Versatile family syscon registers.
config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
tristate "ASUS Z00T TM5P5 NT35596 panel"
depends on GPIOLIB && OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the ASUS TMP5P5
NT35596 1080x1920 video mode panel as found in some Asus
Zenfone 2 Laser Z00T devices.
config DRM_PANEL_BOE_HIMAX8279D
tristate "Boe Himax8279d panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Boe Himax8279d
TFT-LCD modules. The panel has a 1200x1920 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_BOE_TV101WUM_NL6
tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
45NA WUXGA PANEL DSI Video Mode panel
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
config DRM_PANEL_SIMPLE
tristate "support for simple panels"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
DRM panel driver for dumb panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_ELIDA_KD35T133
tristate "Elida KD35T133 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Elida
KD35T133 controller for 320x480 LCD panels with MIPI-DSI
system interfaces.
config DRM_PANEL_FEIXIN_K101_IM2BA02
tristate "Feixin K101 IM2BA02 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Feixin K101 IM2BA02
4-lane 800x1280 MIPI DSI panel.
config DRM_PANEL_FEIYANG_FY07024DI26A30D
tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
select REGMAP
help
Say Y here if you want to enable support for Ilitek IL9322
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
config DRM_PANEL_ILITEK_ILI9881C
tristate "Ilitek ILI9881C-based panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Ilitek ILI9881c controller.
config DRM_PANEL_INNOLUX_P079ZCA
tristate "Innolux P079ZCA panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Innolux P079ZCA
TFT-LCD modules. The panel has a 1024x768 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_JDI_LT070ME05000
tristate "JDI LT070ME05000 WUXGA DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for JDI DSI video mode
panel as found in Google Nexus 7 (2013) devices.
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
config DRM_PANEL_KINGDISPLAY_KD097D04
tristate "Kingdisplay kd097d04 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Kingdisplay kd097d04
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_LEADTEK_LTK050H3146W
tristate "Leadtek LTK050H3146W panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Leadtek LTK050H3146W
TFT-LCD modules. The panel has a 720x1280 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_LEADTEK_LTK500HD1829
tristate "Leadtek LTK500HD1829 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Kingdisplay kd097d04
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
help
Say Y here if you want to enable support for the LB035Q02 RGB panel
(found on the Gumstix Overo Palo35 board). To compile this driver as
a module, choose M here.
config DRM_PANEL_LG_LG4573
tristate "LG4573 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
help
Say Y here if you want to enable support for the NEC NL8048HL11 RGB
panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
as a module, choose M here.
config DRM_PANEL_NOVATEK_NT35510
tristate "Novatek NT35510 RGB panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the panels built
around the Novatek NT35510 display controller, such as some
Hydis panels.
config DRM_PANEL_NOVATEK_NT36672A
tristate "Novatek NT36672A DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the panels built
around the Novatek NT36672A display controller, such as some
Tianma panels used in a few Xiaomi Poco F1 mobile phones.
config DRM_PANEL_NOVATEK_NT39016
tristate "Novatek NT39016 RGB/SPI panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
select REGMAP_SPI
help
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
config DRM_PANEL_MANTIX_MLAF057WE51
tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Mantix
MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
has a resolution of 720x1440 pixels, a built in backlight and touch
controller.
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
depends on I2C
depends on BACKLIGHT_CLASS_DEVICE
help
The panel is used with different sizes LCDs, from 480x272 to
1280x800, and 24 bit per pixel.
Say Y here if you want to enable support for Olimex Ltd.
LCD-OLinuXino panel.
config DRM_PANEL_ORISETECH_OTM8009A
tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Orise Technology
otm8009a 480x800 dsi 2dl panel.
config DRM_PANEL_OSD_OSD101T2587_53TS
tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for One Stop Displays
OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
config DRM_PANEL_PANASONIC_VVX10F034N00
tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Panasonic VVX10F034N00
WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
Xperia Z2 tablets
config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
tristate "Raspberry Pi 7-inch touchscreen panel"
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for the Raspberry
Pi 7" Touchscreen. To compile this driver as a module,
choose M here.
config DRM_PANEL_RAYDIUM_RM67191
tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Raydium RM67191 FHD
(1080x1920) DSI panel.
config DRM_PANEL_RAYDIUM_RM68200
tristate "Raydium RM68200 720x1280 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Raydium RM68200
720x1280 DSI video mode panel.
config DRM_PANEL_RONBO_RB070D30
tristate "Ronbo Electronics RB070D30 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Ronbo Electronics
RB070D30 1024x600 DSI panel.
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E3HA2
tristate "Samsung S6E3HA2 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E63J0X03
tristate "Samsung S6E63J0X03 DSI command mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E63M0
tristate "Samsung S6E63M0 RGB panel"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Samsung S6E63M0
AMOLED LCD panel. This panel can be accessed using SPI or
DSI.
config DRM_PANEL_SAMSUNG_S6E63M0_SPI
tristate "Samsung S6E63M0 RGB SPI interface"
depends on SPI
depends on DRM_PANEL_SAMSUNG_S6E63M0
default DRM_PANEL_SAMSUNG_S6E63M0
help
Say Y here if you want to be able to access the Samsung
S6E63M0 panel using SPI.
config DRM_PANEL_SAMSUNG_S6E63M0_DSI
tristate "Samsung S6E63M0 RGB DSI interface"
depends on DRM_MIPI_DSI
depends on DRM_PANEL_SAMSUNG_S6E63M0
help
Say Y here if you want to be able to access the Samsung
S6E63M0 panel using DSI.
config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_SOFEF00
tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y or M here if you want to enable support for the Samsung AMOLED
command mode panels found in the OnePlus 6/6T smartphones.
The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
config DRM_PANEL_SEIKO_43WVF1G
tristate "Seiko 43WVF1G panel"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for the Seiko
43WVF1G controller for 800x480 LCD panels
config DRM_PANEL_SHARP_LQ101R1SX01
tristate "Sharp LQ101R1SX01 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sharp LQ101R1SX01
TFT-LCD modules. The panel has a 2560x1600 resolution and uses
24 bit RGB per pixel. It provides a dual MIPI DSI interface to
the host and has a built-in LED backlight.
To compile this driver as a module, choose M here: the module
will be called panel-sharp-lq101r1sx01.
config DRM_PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 VGA LCD panel"
depends on GPIOLIB && OF && REGULATOR
help
Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
(480x640) LCD panel (found on the TI SDP3430 board).
config DRM_PANEL_SHARP_LS043T1LE01
tristate "Sharp LS043T1LE01 qHD video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
(540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
config DRM_PANEL_SITRONIX_ST7701
tristate "Sitronix ST7701 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sitronix
ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
system interfaces.
config DRM_PANEL_SITRONIX_ST7703
tristate "Sitronix ST7703 based MIPI touchscreen panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sitronix ST7703 based
panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
in backlight and touch controller.
Touch input support is provided by the goodix driver and needs to be
selected separately.
config DRM_PANEL_SITRONIX_ST7789V
tristate "Sitronix ST7789V panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
config DRM_PANEL_SONY_ACX424AKP
tristate "Sony ACX424AKP DSI command mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable the Sony ACX424 display
panel. This panel supports DSI in both command and video
mode.
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sony ACX565AKM
800x600 3.5" panel (found on the Nokia N900).
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
panel module. The panel has a 1024×600 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.
config DRM_PANEL_TPO_TD028TTEC1
tristate "Toppoly (TPO) TD028TTEC1 panel driver"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for TPO TD028TTEC1 480x640
2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
config DRM_PANEL_TPO_TD043MTEA1
tristate "Toppoly (TPO) TD043MTEA1 panel driver"
depends on GPIOLIB && OF && REGULATOR && SPI
help
Say Y here if you want to enable support for TPO TD043MTEA1 800x480
4.3" panel (found on the OMAP3 Pandora board).
config DRM_PANEL_TPO_TPG110
tristate "TPO TPG 800x400 panel"
depends on OF && SPI && GPIOLIB
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for TPO TPG110
400CH LTPS TFT LCD Single Chip Digital Driver for up to
800x400 LCD panels.
config DRM_PANEL_TRULY_NT35597_WQXGA
tristate "Truly WQXGA"
depends on OF
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
config DRM_PANEL_VISIONOX_RM69299
tristate "Visionox RM69299"
depends on OF
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for Visionox
RM69299 DSI Video Mode panel.
config DRM_PANEL_XINPENG_XPP055C272
tristate "Xinpeng XPP055C272 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Xinpeng
XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
system interfaces.
endmenu