drivers/isdn/gigaset/gigaset.h

/* Siemens Gigaset 307x driver
 * Common header file for all connection variants
 *
 * Written by Stefan Eilers <Eilers.Stefan@epost.de>
 *        and Hansjoerg Lipp <hjlipp@web.de>
 *
 * Version: $Id: gigaset.h,v 1.97.4.26 2006/02/04 18:28:16 hjlipp Exp $
 * ===========================================================================
 */

#ifndef GIGASET_H
#define GIGASET_H

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <asm/atomic.h>
#include <linux/spinlock.h>
#include <linux/isdnif.h>
#include <linux/usb.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ppp_defs.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/list.h>

#define GIG_VERSION {0,5,0,0}
#define GIG_COMPAT  {0,4,0,0}

#define MAX_REC_PARAMS 10                         /* Max. number of params in response string */
#define MAX_RESP_SIZE 512                         /* Max. size of a response string */
#define HW_HDR_LEN 2                              /* Header size used to store ack info */

#define MAX_EVENTS 64                          /* size of event queue */

#define RBUFSIZE 8192
#define SBUFSIZE 4096				/* sk_buff payload size */

#define MAX_BUF_SIZE (SBUFSIZE - 2)		/* Max. size of a data packet from LL */
#define TRANSBUFSIZE 768			/* bytes per skb for transparent receive */

/* compile time options */
#define GIG_MAJOR 0

#define GIG_MAYINITONDIAL
#define GIG_RETRYCID
#define GIG_X75

#define MAX_TIMER_INDEX 1000
#define MAX_SEQ_INDEX   1000

#define GIG_TICK (HZ / 10)

/* timeout values (unit: 1 sec) */
#define INIT_TIMEOUT 1

/* timeout values (unit: 0.1 sec) */
#define RING_TIMEOUT 3		/* for additional parameters to RING */
#define BAS_TIMEOUT 20		/* for response to Base USB ops */
#define ATRDY_TIMEOUT 3		/* for HD_READY_SEND_ATDATA */

#define BAS_RETRY 3		/* max. retries for base USB ops */

#define MAXACT 3

#define IFNULL(a)         if (unlikely(!(a)))
#define IFNULLRET(a)      if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); return; }
#define IFNULLRETVAL(a,b) if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); return (b); }
#define IFNULLCONT(a)     if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); continue; }
#define IFNULLGOTO(a,b)   if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); goto b; }

extern int gigaset_debuglevel;	/* "needs" cast to (enum debuglevel) */

/* any combination of these can be given with the 'debug=' parameter to insmod, e.g.
 * 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and DEBUG_INTR. */
enum debuglevel { /* up to 24 bits (atomic_t) */
	DEBUG_REG	  = 0x0002, /* serial port I/O register operations */
	DEBUG_OPEN	  = 0x0004, /* open/close serial port */
	DEBUG_INTR	  = 0x0008, /* interrupt processing */
	DEBUG_INTR_DUMP   = 0x0010, /* Activating hexdump debug output on interrupt
				      requests, not available as run-time option */
	DEBUG_CMD	  = 0x00020, /* sent/received LL commands */
	DEBUG_STREAM	  = 0x00040, /* application data stream I/O events */
	DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
	DEBUG_LLDATA	  = 0x00100, /* sent/received LL data */
	DEBUG_INTR_0	  = 0x00200, /* serial port output interrupt processing */
	DEBUG_DRIVER	  = 0x00400, /* driver structure */
	DEBUG_HDLC	  = 0x00800, /* M10x HDLC processing */
	DEBUG_WRITE	  = 0x01000, /* M105 data write */
	DEBUG_TRANSCMD    = 0x02000, /*AT-COMMANDS+RESPONSES*/
	DEBUG_MCMD        = 0x04000, /*COMMANDS THAT ARE SENT VERY OFTEN*/
	DEBUG_INIT	  = 0x08000, /* (de)allocation+initialization of data structures */
	DEBUG_LOCK	  = 0x10000, /* semaphore operations */
	DEBUG_OUTPUT	  = 0x20000, /* output to device */
	DEBUG_ISO         = 0x40000, /* isochronous transfers */
	DEBUG_IF	  = 0x80000, /* character device operations */
	DEBUG_USBREQ	  = 0x100000, /* USB communication (except payload data) */
	DEBUG_LOCKCMD     = 0x200000, /* AT commands and responses when MS_LOCKED */

	DEBUG_ANY	  = 0x3fffff, /* print message if any of the others is activated */
};

#ifdef CONFIG_GIGASET_DEBUG
#define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
//#define DEBUG_DEFAULT (DEBUG_LOCK | DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUF_IF | DEBUG_DRIVER | DEBUG_OUTPUT | DEBUG_INTR)
#else
#define DEBUG_DEFAULT 0
#endif

/* redefine syslog macros to prepend module name instead of entire source path */
/* The space before the comma in ", ##" is needed by gcc 2.95 */
#undef info
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)

#undef notice
#define notice(format, arg...) printk(KERN_NOTICE "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)

#undef warn
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)

#undef err
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)

#undef dbg
#ifdef CONFIG_GIGASET_DEBUG
#define dbg(level, format, arg...) do { if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
	printk(KERN_DEBUG "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg); } while (0)
#else
#define dbg(level, format, arg...) do {} while (0)
#endif

void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
                        size_t len, const unsigned char *buf, int from_user);

/* connection state */
#define ZSAU_NONE			0
#define ZSAU_DISCONNECT_IND		4
#define ZSAU_OUTGOING_CALL_PROCEEDING	1
#define ZSAU_PROCEEDING			1
#define ZSAU_CALL_DELIVERED		2
#define ZSAU_ACTIVE			3
#define ZSAU_NULL			5
#define ZSAU_DISCONNECT_REQ		6
#define ZSAU_UNKNOWN			-1

/* USB control transfer requests */
#define OUT_VENDOR_REQ			(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
#define IN_VENDOR_REQ			(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)

/* int-in-events 3070 */
#define HD_B1_FLOW_CONTROL		0x80
#define HD_B2_FLOW_CONTROL		0x81
#define HD_RECEIVEATDATA_ACK		(0x35)		// 3070		// att: HD_RECEIVE>>AT<<DATA_ACK
#define HD_READY_SEND_ATDATA		(0x36)		// 3070
#define HD_OPEN_ATCHANNEL_ACK		(0x37)		// 3070
#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		// 3070
#define HD_DEVICE_INIT_OK		(0x11)		// ISurf USB + 3070
#define HD_OPEN_B1CHANNEL_ACK		(0x51)		// ISurf USB + 3070
#define HD_OPEN_B2CHANNEL_ACK		(0x52)		// ISurf USB + 3070
#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		// ISurf USB + 3070
#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		// ISurf USB + 3070
// 	 Powermangment
#define HD_SUSPEND_END			(0x61)		// ISurf USB
//   Configuration
#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		// ISurf USB + 3070

/* control requests 3070 */
#define	HD_OPEN_B1CHANNEL		(0x23)		// ISurf USB + 3070
#define	HD_CLOSE_B1CHANNEL		(0x24)		// ISurf USB + 3070
#define	HD_OPEN_B2CHANNEL		(0x25)		// ISurf USB + 3070
#define	HD_CLOSE_B2CHANNEL		(0x26)		// ISurf USB + 3070
#define HD_RESET_INTERRUPT_PIPE		(0x27)		// ISurf USB + 3070
#define	HD_DEVICE_INIT_ACK		(0x34)		// ISurf USB + 3070
#define	HD_WRITE_ATMESSAGE		(0x12)		// 3070
#define	HD_READ_ATMESSAGE		(0x13)		// 3070
#define	HD_OPEN_ATCHANNEL		(0x28)		// 3070
#define	HD_CLOSE_ATCHANNEL		(0x29)		// 3070

/* USB frames for isochronous transfer */
#define BAS_FRAMETIME	1		/* number of milliseconds between frames */
#define BAS_NUMFRAMES	8		/* number of frames per URB */
#define BAS_MAXFRAME	16		/* allocated bytes per frame */
#define BAS_NORMFRAME	8		/* send size without flow control */
#define BAS_HIGHFRAME	10		/* "    "    with positive flow control */
#define BAS_LOWFRAME	5		/* "    "    with negative flow control */
#define BAS_CORRFRAMES	4		/* flow control multiplicator */

#define BAS_INBUFSIZE	(BAS_MAXFRAME * BAS_NUMFRAMES) /* size of isochronous input buffer per URB */
#define BAS_OUTBUFSIZE	4096		/* size of common isochronous output buffer */
#define BAS_OUTBUFPAD	BAS_MAXFRAME	/* size of pad area for isochronous output buffer */

#define BAS_INURBS	3
#define BAS_OUTURBS	3

/* variable commands in struct bc_state */
#define AT_ISO		0
#define AT_DIAL		1
#define AT_MSN		2
#define AT_BC		3
#define AT_PROTO	4
#define AT_TYPE		5
#define AT_HLC		6
#define AT_NUM		7

/* variables in struct at_state_t */
#define VAR_ZSAU   0
#define VAR_ZDLE   1
#define VAR_ZVLS   2
#define VAR_ZCTP   3
#define VAR_NUM    4

#define STR_NMBR   0
#define STR_ZCPN   1
#define STR_ZCON   2
#define STR_ZBC    3
#define STR_ZHLC   4
#define STR_NUM    5

#define EV_TIMEOUT      -105
#define EV_IF_VER       -106
#define EV_PROC_CIDMODE -107
#define EV_SHUTDOWN     -108
#define EV_START        -110
#define EV_STOP         -111
#define EV_IF_LOCK      -112
#define EV_PROTO_L2     -113
#define EV_ACCEPT       -114
#define EV_DIAL         -115
#define EV_HUP          -116
#define EV_BC_OPEN      -117
#define EV_BC_CLOSED    -118

/* input state */
#define INS_command     0x0001
#define INS_DLE_char    0x0002
#define INS_byte_stuff  0x0004
#define INS_have_data   0x0008
#define INS_skip_frame  0x0010
#define INS_DLE_command 0x0020
#define INS_flag_hunt	0x0040

/* channel state */
#define CHS_D_UP	0x01
#define CHS_B_UP	0x02
#define CHS_NOTIFY_LL	0x04

#define ICALL_REJECT  0
#define ICALL_ACCEPT  1
#define ICALL_IGNORE  2

/* device state */
#define MS_UNINITIALIZED        0
#define MS_INIT                 1
#define MS_LOCKED               2
#define MS_SHUTDOWN             3
#define MS_RECOVER              4
#define MS_READY                5

/* mode */
#define M_UNKNOWN       0
#define M_CONFIG        1
#define M_UNIMODEM      2
#define M_CID           3

/* start mode */
#define SM_LOCKED       0
#define SM_ISDN         1 /* default */

struct gigaset_ops;
struct gigaset_driver;

struct usb_cardstate;
struct ser_cardstate;
struct bas_cardstate;

struct bc_state;
struct usb_bc_state;
struct ser_bc_state;
struct bas_bc_state;

struct reply_t {
	int	resp_code;      /* RSP_XXXX */
	int	min_ConState;   /* <0 => ignore */
	int	max_ConState;   /* <0 => ignore */
	int	parameter;      /* e.g. ZSAU_XXXX <0: ignore*/
	int	new_ConState;   /* <0 => ignore */
	int	timeout;        /* >0 => *HZ; <=0 => TOUT_XXXX*/
	int	action[MAXACT]; /* ACT_XXXX */
	char *command;        /* NULL==none */
};

extern struct reply_t gigaset_tab_cid_m10x[];
extern struct reply_t gigaset_tab_nocid_m10x[];

struct inbuf_t {
	unsigned char           *rcvbuf;                /* usb-gigaset receive buffer */
	struct bc_state		*bcs;
	struct cardstate *cs;
	int inputstate;

	atomic_t head, tail;
	unsigned char data[RBUFSIZE];
};

/* isochronous write buffer structure
 * circular buffer with pad area for extraction of complete USB frames
 * - data[read..nextread-1] is valid data already submitted to the USB subsystem
 * - data[nextread..write-1] is valid data yet to be sent
 * - data[write] is the next byte to write to
 *   - in byte-oriented L2 procotols, it is completely free
 *   - in bit-oriented L2 procotols, it may contain a partial byte of valid data
 * - data[write+1..read-1] is free
 * - wbits is the number of valid data bits in data[write], starting at the LSB
 * - writesem is the semaphore for writing to the buffer:
 *   if writesem <= 0, data[write..read-1] is currently being written to
 * - idle contains the byte value to repeat when the end of valid data is
 *   reached; if nextread==write (buffer contains no data to send), either the
 *   BAS_OUTBUFPAD bytes immediately before data[write] (if write>=BAS_OUTBUFPAD)
 *   or those of the pad area (if write<BAS_OUTBUFPAD) are also filled with that
 *   value
 * - optionally, the following statistics on the buffer's usage can be collected:
 *   maxfill: maximum number of bytes occupied
 *   idlefills: number of times a frame of idle bytes is prepared
 *   emptygets: number of times the buffer was empty when a data frame was requested
 *   backtoback: number of times two data packets were entered into the buffer
 *    without intervening idle flags
 *   nakedback: set if no idle flags have been inserted since the last data packet
 */
struct isowbuf_t {
	atomic_t	read;
	atomic_t	nextread;
	atomic_t	write;
	atomic_t	writesem;
	int		wbits;
	unsigned char	data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
	unsigned char	idle;
};

/* isochronous write URB context structure
 * data to be stored along with the URB and retrieved when it is returned
 * as completed by the USB subsystem
 * - urb: pointer to the URB itself
 * - bcs: pointer to the B Channel control structure
 * - limit: end of write buffer area covered by this URB
 */
struct isow_urbctx_t {
	struct urb *urb;
	struct bc_state *bcs;
	int limit;
};

/* AT state structure
 * data associated with the state of an ISDN connection, whether or not
 * it is currently assigned a B channel
 */
struct at_state_t {
	struct list_head        list;
	int                     waiting;
	int                     getstring;
	atomic_t		timer_index;
	unsigned long		timer_expires;
	int			timer_active;
	unsigned int		ConState;                           /* State of connection */
	struct reply_t          *replystruct;
	int                     cid;
	int                     int_var[VAR_NUM];   /* see VAR_XXXX */
	char                    *str_var[STR_NUM];  /* see STR_XXXX */
	unsigned                pending_commands;   /* see PC_XXXX */
	atomic_t                seq_index;

	struct cardstate    *cs;
	struct bc_state         *bcs;
};

struct resp_type_t {
	unsigned char	*response;
	int		resp_code;           /* RSP_XXXX */
	int		type;                /* RT_XXXX */
};

struct prot_skb {
	atomic_t		empty;
	struct semaphore	*sem;
	struct sk_buff		*skb;
};

struct event_t {
	int type;
	void *ptr, *arg;
	int parameter;
	int cid;
	struct at_state_t *at_state;
};

/* This buffer holds all information about the used B-Channel */
struct bc_state {
	struct sk_buff *tx_skb;                        /* Current transfer buffer to modem */
	struct sk_buff_head squeue;	               /* B-Channel send Queue */

	/* Variables for debugging .. */
	int corrupted;                                   /* Counter for corrupted packages */
	int trans_down;                                  /* Counter of packages (downstream) */
	int trans_up;                                    /* Counter of packages (upstream) */

	struct at_state_t at_state;
	unsigned long rcvbytes;

	__u16 fcs;
	struct sk_buff *skb;
	int inputstate; /* see INS_XXXX */

	int channel;

	struct cardstate *cs;

	unsigned chstate;			/* bitmap (CHS_*) */
	int ignore;
	unsigned	proto2;			/* Layer 2 protocol (ISDN_PROTO_L2_*) */
	char		*commands[AT_NUM]; /* see AT_XXXX */

#ifdef CONFIG_GIGASET_DEBUG
	int emptycount;
#endif
	int busy;
	int use_count;

	/* hardware drivers */
	union {
		struct ser_bc_state *ser;		 /* private data of serial hardware driver */
		struct usb_bc_state *usb;		 /* private data of usb hardware driver */
		struct bas_bc_state *bas;
	} hw;
};

struct cardstate {
	struct gigaset_driver *driver;
	unsigned minor_index;

	const struct gigaset_ops *ops;

	/* Stuff to handle communication */
	//wait_queue_head_t initwait;
	wait_queue_head_t waitqueue;
	int waiting;
	atomic_t mode;                       /* see M_XXXX */
	atomic_t mstate;                     /* Modem state: see MS_XXXX */
	                                     /* only changed by the event layer */
	int cmd_result;

	int channels;
	struct bc_state *bcs;                /* Array of struct bc_state */

	int onechannel;                      /* data and commands transmitted in one stream (M10x) */

	spinlock_t lock;
	struct at_state_t at_state;          /* at_state_t for cid == 0 */
	struct list_head temp_at_states;     /* list of temporary "struct at_state_t"s without B channel */

	struct inbuf_t *inbuf;

	struct cmdbuf_t *cmdbuf, *lastcmdbuf;
	spinlock_t cmdlock;
	unsigned curlen, cmdbytes;

	unsigned open_count;
	struct tty_struct *tty;
	struct tasklet_struct if_wake_tasklet;
	unsigned control_state;

	unsigned fwver[4];
	int gotfwver;

	atomic_t running;                    /* !=0 if events are handled */
	atomic_t connected;                  /* !=0 if hardware is connected */

	atomic_t cidmode;

	int myid;                            /* id for communication with LL */
	isdn_if iif;

	struct reply_t *tabnocid;
	struct reply_t *tabcid;
	int cs_init;
	int ignoreframes;                    /* frames to ignore after setting up the B channel */
	struct semaphore sem;                /* locks this structure: */
	                                     /*   connected is not changed, */
	                                     /*   hardware_up is not changed, */
	                                     /*   MState is not changed to or from MS_LOCKED */

	struct timer_list timer;
	int retry_count;
	int dle;                             /* !=0 if modem commands/responses are dle encoded */
	int cur_at_seq;                      /* sequence of AT commands being processed */
	int curchannel;                      /* channel, those commands are meant for */
	atomic_t commands_pending;           /* flag(s) in xxx.commands_pending have been set */
	struct tasklet_struct event_tasklet; /* tasklet for serializing AT commands. Scheduled
	                                      *   -> for modem reponses (and incomming data for M10x)
	                                      *   -> on timeout
	                                      *   -> after setting bits in xxx.at_state.pending_command
	                                      *      (e.g. command from LL) */
	struct tasklet_struct write_tasklet; /* tasklet for serial output
					      * (not used in base driver) */

	/* event queue */
	struct event_t events[MAX_EVENTS];
	atomic_t ev_tail, ev_head;
	spinlock_t ev_lock;

	/* current modem response */
	unsigned char respdata[MAX_RESP_SIZE];
	unsigned cbytes;

	/* hardware drivers */
	union {
		struct usb_cardstate *usb; /* private data of USB hardware driver */
		struct ser_cardstate *ser; /* private data of serial hardware driver */
		struct bas_cardstate *bas; /* private data of base hardware driver */
	} hw;
};

struct gigaset_driver {
	struct list_head list;
	spinlock_t lock;                       /* locks minor tables and blocked */
	//struct semaphore sem;                /* locks this structure */
	struct tty_driver *tty;
	unsigned have_tty;
	unsigned minor;
	unsigned minors;
	struct cardstate *cs;
	unsigned *flags;
	int blocked;

	const struct gigaset_ops *ops;
	struct module *owner;
};

struct cmdbuf_t {
	struct cmdbuf_t *next, *prev;
	int len, offset;
	struct tasklet_struct *wake_tasklet;
	unsigned char buf[0];
};

struct bas_bc_state {
	/* isochronous output state */
	atomic_t	running;
	atomic_t	corrbytes;
	spinlock_t	isooutlock;
	struct isow_urbctx_t	isoouturbs[BAS_OUTURBS];
	struct isow_urbctx_t	*isooutdone, *isooutfree, *isooutovfl;
	struct isowbuf_t	*isooutbuf;
	unsigned numsub;			/* submitted URB counter (for diagnostic messages only) */
	struct tasklet_struct	sent_tasklet;

	/* isochronous input state */
	spinlock_t isoinlock;
	struct urb *isoinurbs[BAS_INURBS];
	unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
	struct urb *isoindone;	                /* completed isoc read URB */
	int loststatus;				/* status of dropped URB */
	unsigned isoinlost;			/* number of bytes lost */
	/* state of bit unstuffing algorithm (in addition to BC_state.inputstate) */
	unsigned seqlen;			/* number of '1' bits not yet unstuffed */
	unsigned inbyte, inbits;		/* collected bits for next byte */
	/* statistics */
	unsigned goodbytes;			/* bytes correctly received */
	unsigned alignerrs;			/* frames with incomplete byte at end */
	unsigned fcserrs;			/* FCS errors */
	unsigned frameerrs;			/* framing errors */
	unsigned giants;			/* long frames */
	unsigned runts;				/* short frames */
	unsigned aborts;			/* HDLC aborts */
	unsigned shared0s;			/* '0' bits shared between flags */
	unsigned stolen0s;			/* '0' stuff bits also serving as leading flag bits */
	struct tasklet_struct rcvd_tasklet;
};

struct gigaset_ops {
	/* Called from ev-layer.c/interface.c for sending AT commands to the device */
	int (*write_cmd)(struct cardstate *cs,
	                 const unsigned char *buf, int len,
	                 struct tasklet_struct *wake_tasklet);

	/* Called from interface.c for additional device control */
	int (*write_room)(struct cardstate *cs);
	int (*chars_in_buffer)(struct cardstate *cs);
	int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]);

	/* Called from ev-layer.c after setting up connection
	 * Should call gigaset_bchannel_up(), when finished. */
	int (*init_bchannel)(struct bc_state *bcs);

	/* Called from ev-layer.c after hanging up
	 * Should call gigaset_bchannel_down(), when finished. */
	int (*close_bchannel)(struct bc_state *bcs);

	/* Called by gigaset_initcs() for setting up bcs->hw.xxx */
	int (*initbcshw)(struct bc_state *bcs);

	/* Called by gigaset_freecs() for freeing bcs->hw.xxx */
	int (*freebcshw)(struct bc_state *bcs);

	/* Called by gigaset_stop() or gigaset_bchannel_down() for resetting bcs->hw.xxx */
	void (*reinitbcshw)(struct bc_state *bcs);

	/* Called by gigaset_initcs() for setting up cs->hw.xxx */
	int (*initcshw)(struct cardstate *cs);

	/* Called by gigaset_freecs() for freeing cs->hw.xxx */
	void (*freecshw)(struct cardstate *cs);

	///* Called by gigaset_stop() for killing URBs, shutting down the device, ...
	//   hardwareup: ==0: don't try to shut down the device, hardware is really not accessible
	//	       !=0: hardware still up */
	//void (*stophw)(struct cardstate *cs, int hardwareup);

	/* Called from common.c/interface.c for additional serial port control */
	int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state, unsigned new_state);
	int (*baud_rate)(struct cardstate *cs, unsigned cflag);
	int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);

	/* Called from i4l.c to put an skb into the send-queue. */
	int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);

	/* Called from ev-layer.c to process a block of data
	 * received through the common/control channel. */
	void (*handle_input)(struct inbuf_t *inbuf);

};

/* = Common structures and definitions ======================================= */

/* Parser states for DLE-Event:
 * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
 * <DLE_FLAG>:  0x10
 * <EVENT>:     ((a-z)* | (A-Z)* | (0-10)*)+
 */
#define DLE_FLAG       0x10

/* ===========================================================================
 *  Functions implemented in asyncdata.c
 */

/* Called from i4l.c to put an skb into the send-queue.
 * After sending gigaset_skb_sent() should be called. */
int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);

/* Called from ev-layer.c to process a block of data
 * received through the common/control channel. */
void gigaset_m10x_input(struct inbuf_t *inbuf);

/* ===========================================================================
 *  Functions implemented in isocdata.c
 */

/* Called from i4l.c to put an skb into the send-queue.
 * After sending gigaset_skb_sent() should be called. */
int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);

/* Called from ev-layer.c to process a block of data
 * received through the common/control channel. */
void gigaset_isoc_input(struct inbuf_t *inbuf);

/* Called from bas-gigaset.c to process a block of data
 * received through the isochronous channel */
void gigaset_isoc_receive(unsigned char *src, unsigned count, struct bc_state *bcs);

/* Called from bas-gigaset.c to put a block of data
 * into the isochronous output buffer */
int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len);

/* Called from bas-gigaset.c to initialize the isochronous output buffer */
void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);

/* Called from bas-gigaset.c to retrieve a block of bytes for sending */
int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);

/* ===========================================================================
 *  Functions implemented in i4l.c/gigaset.h
 */

/* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);

/* Called from xxx-gigaset.c to indicate completion of sending an skb */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);

/* Called from common.c/ev-layer.c to indicate events relevant to the LL */
int gigaset_isdn_icall(struct at_state_t *at_state);
int gigaset_isdn_setup_accept(struct at_state_t *at_state);
int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);

void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);


static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
{
	isdn_ctrl response;

	/* error -> LL */
	dbg(DEBUG_CMD, "sending L1ERR");
	response.driver = bcs->cs->myid;
	response.command = ISDN_STAT_L1ERR;
	response.arg = bcs->channel;
	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
	bcs->cs->iif.statcallb(&response);
}

/* ===========================================================================
 *  Functions implemented in ev-layer.c
 */

/* tasklet called from common.c to process queued events */
void gigaset_handle_event(unsigned long data);

/* called from isocdata.c / asyncdata.c
 * when a complete modem response line has been received */
void gigaset_handle_modem_response(struct cardstate *cs);

/* ===========================================================================
 *  Functions implemented in proc.c
 */

/* initialize sysfs for device */
void gigaset_init_dev_sysfs(struct usb_interface *interface);
void gigaset_free_dev_sysfs(struct usb_interface *interface);

/* ===========================================================================
 *  Functions implemented in common.c/gigaset.h
 */

void gigaset_bcs_reinit(struct bc_state *bcs);
void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
                     struct cardstate *cs, int cid);
int gigaset_get_channel(struct bc_state *bcs);
void gigaset_free_channel(struct bc_state *bcs);
int gigaset_get_channels(struct cardstate *cs);
void gigaset_free_channels(struct cardstate *cs);
void gigaset_block_channels(struct cardstate *cs);

/* Allocate and initialize driver structure. */
struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
                                          const char *procname,
                                          const char *devname,
                                          const char *devfsname,
                                          const struct gigaset_ops *ops,
                                          struct module *owner);

/* Deallocate driver structure. */
void gigaset_freedriver(struct gigaset_driver *drv);
void gigaset_debugdrivers(void);
struct cardstate *gigaset_get_cs_by_minor(unsigned minor);
struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
struct cardstate *gigaset_get_cs_by_id(int id);

/* For drivers without fixed assignment device<->cardstate (usb) */
struct cardstate *gigaset_getunassignedcs(struct gigaset_driver *drv);
void gigaset_unassign(struct cardstate *cs);
void gigaset_blockdriver(struct gigaset_driver *drv);

/* Allocate and initialize card state. Calls hardware dependent gigaset_init[b]cs(). */
struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
				 int onechannel, int ignoreframes,
				 int cidmode, const char *modulename);

/* Free card state. Calls hardware dependent gigaset_free[b]cs(). */
void gigaset_freecs(struct cardstate *cs);

/* Tell common.c that hardware and driver are ready. */
int gigaset_start(struct cardstate *cs);

/* Tell common.c that the device is not present any more. */
void gigaset_stop(struct cardstate *cs);

/* Tell common.c that the driver is being unloaded. */
void gigaset_shutdown(struct cardstate *cs);

/* Tell common.c that an skb has been sent. */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);

/* Append event to the queue.
 * Returns NULL on failure or a pointer to the event on success.
 * ptr must be kmalloc()ed (and not be freed by the caller).
 */
struct event_t *gigaset_add_event(struct cardstate *cs,
                                  struct at_state_t *at_state, int type,
                                  void *ptr, int parameter, void *arg);

/* Called on CONFIG1 command from frontend. */
int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode

/* cs->lock must not be locked */
static inline void gigaset_schedule_event(struct cardstate *cs)
{
	unsigned long flags;
	spin_lock_irqsave(&cs->lock, flags);
	if (atomic_read(&cs->running))
		tasklet_schedule(&cs->event_tasklet);
	spin_unlock_irqrestore(&cs->lock, flags);
}

/* Tell common.c that B channel has been closed. */
/* cs->lock must not be locked */
static inline void gigaset_bchannel_down(struct bc_state *bcs)
{
	gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);

	dbg(DEBUG_CMD, "scheduling BC_CLOSED");
	gigaset_schedule_event(bcs->cs);
}

/* Tell common.c that B channel has been opened. */
/* cs->lock must not be locked */
static inline void gigaset_bchannel_up(struct bc_state *bcs)
{
	gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);

	dbg(DEBUG_CMD, "scheduling BC_OPEN");
	gigaset_schedule_event(bcs->cs);
}

/* handling routines for sk_buff */
/* ============================= */

/* private version of __skb_put()
 * append 'len' bytes to the content of 'skb', already knowing that the
 * existing buffer can accomodate them
 * returns a pointer to the location where the new bytes should be copied to
 * This function does not take any locks so it must be called with the
 * appropriate locks held only.
 */
static inline unsigned char *gigaset_skb_put_quick(struct sk_buff *skb,
                                                   unsigned int len)
{
	unsigned char *tmp = skb->tail;
	/*SKB_LINEAR_ASSERT(skb);*/		/* not needed here */
	skb->tail += len;
	skb->len += len;
	return tmp;
}

/* pass received skb to LL
 * Warning: skb must not be accessed anymore!
 */
static inline void gigaset_rcv_skb(struct sk_buff *skb,
                                   struct cardstate *cs,
                                   struct bc_state *bcs)
{
	cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
	bcs->trans_down++;
}

/* handle reception of corrupted skb
 * Warning: skb must not be accessed anymore!
 */
static inline void gigaset_rcv_error(struct sk_buff *procskb,
                                     struct cardstate *cs,
                                     struct bc_state *bcs)
{
	if (procskb)
		dev_kfree_skb(procskb);

	if (bcs->ignore)
		--bcs->ignore;
	else {
		++bcs->corrupted;
		gigaset_isdn_rcv_err(bcs);
	}
}


/* bitwise byte inversion table */
extern __u8 gigaset_invtab[];	/* in common.c */


/* append received bytes to inbuf */
static inline int gigaset_fill_inbuf(struct inbuf_t *inbuf,
                                     const unsigned char *src,
                                     unsigned numbytes)
{
	unsigned n, head, tail, bytesleft;

	dbg(DEBUG_INTR, "received %u bytes", numbytes);

	if (!numbytes)
		return 0;

	bytesleft = numbytes;
	tail = atomic_read(&inbuf->tail);
	head = atomic_read(&inbuf->head);
	dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);

	while (bytesleft) {
		if (head > tail)
			n = head - 1 - tail;
		else if (head == 0)
			n = (RBUFSIZE-1) - tail;
		else
			n = RBUFSIZE - tail;
		if (!n) {
			err("buffer overflow (%u bytes lost)", bytesleft);
			break;
		}
		if (n > bytesleft)
			n = bytesleft;
		memcpy(inbuf->data + tail, src, n);
		bytesleft -= n;
		tail = (tail + n) % RBUFSIZE;
		src += n;
	}
	dbg(DEBUG_INTR, "setting tail to %u", tail);
	atomic_set(&inbuf->tail, tail);
	return numbytes != bytesleft;
}

/* ===========================================================================
 *  Functions implemented in interface.c
 */

/* initialize interface */
void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
                           const char *devname, const char *devfsname);
/* release interface */
void gigaset_if_freedriver(struct gigaset_driver *drv);
/* add minor */
void gigaset_if_init(struct cardstate *cs);
/* remove minor */
void gigaset_if_free(struct cardstate *cs);
/* device received data */
void gigaset_if_receive(struct cardstate *cs,
                        unsigned char *buffer, size_t len);

#endif