blob: 5182e8c2cff27fb14b77c0664ec7ce437fc93f2b [file] [log] [blame]
/*
* $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $
*
* This table is used by some tools to extract hardware parameters.
* The table should be included in the kernel and the decompressor.
* Don't forget to update the tools if you change this table.
*
* Copyright (C) 2001 Axis Communications AB
*
* Authors: Mikael Starvik (starvik@axis.com)
*/
#include <linux/config.h>
#include <asm/arch/hwregs/asm/reg_map_asm.h>
#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
#include <asm/arch/hwregs/asm/gio_defs_asm.h>
.ascii "HW_PARAM_MAGIC" ; Magic number
.dword 0xc0004000 ; Kernel start address
; Debug port
#ifdef CONFIG_ETRAX_DEBUG_PORT0
.dword 0
#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
.dword 1
#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
.dword 2
#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
.dword 3
#else
.dword 4 ; No debug
#endif
; Register values
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg)
.dword CONFIG_ETRAX_MEM_GRP1_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg)
.dword CONFIG_ETRAX_MEM_GRP2_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg)
.dword CONFIG_ETRAX_MEM_GRP3_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg)
.dword CONFIG_ETRAX_MEM_GRP4_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0)
.dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1)
.dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing)
.dword CONFIG_ETRAX_SDRAM_TIMING
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd)
.dword CONFIG_ETRAX_SDRAM_COMMAND
.dword REG_ADDR(gio, regi_gio, rw_pa_dout)
.dword CONFIG_ETRAX_DEF_GIO_PA_OUT
.dword REG_ADDR(gio, regi_gio, rw_pa_oe)
.dword CONFIG_ETRAX_DEF_GIO_PA_OE
.dword REG_ADDR(gio, regi_gio, rw_pb_dout)
.dword CONFIG_ETRAX_DEF_GIO_PB_OUT
.dword REG_ADDR(gio, regi_gio, rw_pb_oe)
.dword CONFIG_ETRAX_DEF_GIO_PB_OE
.dword REG_ADDR(gio, regi_gio, rw_pc_dout)
.dword CONFIG_ETRAX_DEF_GIO_PC_OUT
.dword REG_ADDR(gio, regi_gio, rw_pc_oe)
.dword CONFIG_ETRAX_DEF_GIO_PC_OE
.dword REG_ADDR(gio, regi_gio, rw_pd_dout)
.dword CONFIG_ETRAX_DEF_GIO_PD_OUT
.dword REG_ADDR(gio, regi_gio, rw_pd_oe)
.dword CONFIG_ETRAX_DEF_GIO_PD_OE
.dword REG_ADDR(gio, regi_gio, rw_pe_dout)
.dword CONFIG_ETRAX_DEF_GIO_PE_OUT
.dword REG_ADDR(gio, regi_gio, rw_pe_oe)
.dword CONFIG_ETRAX_DEF_GIO_PE_OE
.dword 0 ; No more register values