blob: 1d82f2277517e23511c48659c2ca649cd1c4cfa3 [file] [log] [blame]
/*
*
* BRIEF MODULE DESCRIPTION
* A DMA channel allocator for Au1000. API is modeled loosely off of
* linux/kernel/dma.c.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* stevel@mvista.com or source@mvista.com
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
* All drivers needing DMA channels, should allocate and release them
* through the public routines `request_dma()' and `free_dma()'.
*
* In order to avoid problems, all processes should allocate resources in
* the same sequence and release them in the reverse order.
*
* So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
* When releasing them, first release the IRQ, then release the DMA. The
* main reason for this order is that, if you are requesting the DMA buffer
* done interrupt, you won't know the irq number until the DMA channel is
* returned from request_dma.
*/
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,},
{.dev_id = -1,}
};
EXPORT_SYMBOL(au1000_dma_table);
// Device FIFO addresses and default DMA modes
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
} dma_dev_table[DMA_NUM_DEV] = {
{UART0_ADDR + UART_TX, 0},
{UART0_ADDR + UART_RX, 0},
{0, 0},
{0, 0},
{AC97C_DATA, DMA_DW16 }, // coherent
{AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0WR, DMA_DW8 | DMA_NC},
{USBD_EP2WR, DMA_DW8 | DMA_NC},
{USBD_EP3WR, DMA_DW8 | DMA_NC},
{USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
{I2S_DATA, DMA_DW32 | DMA_NC},
{I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
};
int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
int length, int *eof, void *data)
{
int i, len = 0;
struct dma_chan *chan;
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
if ((chan = get_dma_chan(i)) != NULL) {
len += sprintf(buf + len, "%2d: %s\n",
i, chan->dev_str);
}
}
if (fpos >= len) {
*start = buf;
*eof = 1;
return 0;
}
*start = buf + fpos;
if ((len -= fpos) > length)
return length;
*eof = 1;
return len;
}
// Device FIFO addresses and default DMA modes - 2nd bank
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
{SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
{SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
};
void dump_au1000_dma_channel(unsigned int dmanr)
{
struct dma_chan *chan;
if (dmanr >= NUM_AU1000_DMA_CHANNELS)
return;
chan = &au1000_dma_table[dmanr];
printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr);
printk(KERN_INFO " mode = 0x%08x\n",
au_readl(chan->io + DMA_MODE_SET));
printk(KERN_INFO " addr = 0x%08x\n",
au_readl(chan->io + DMA_PERIPHERAL_ADDR));
printk(KERN_INFO " start0 = 0x%08x\n",
au_readl(chan->io + DMA_BUFFER0_START));
printk(KERN_INFO " start1 = 0x%08x\n",
au_readl(chan->io + DMA_BUFFER1_START));
printk(KERN_INFO " count0 = 0x%08x\n",
au_readl(chan->io + DMA_BUFFER0_COUNT));
printk(KERN_INFO " count1 = 0x%08x\n",
au_readl(chan->io + DMA_BUFFER1_COUNT));
}
/*
* Finds a free channel, and binds the requested device to it.
* Returns the allocated channel number, or negative on error.
* Requests the DMA done IRQ if irqhandler != NULL.
*/
int request_au1000_dma(int dev_id, const char *dev_str,
irqreturn_t (*irqhandler)(int, void *, struct pt_regs *),
unsigned long irqflags,
void *irq_dev_id)
{
struct dma_chan *chan;
const struct dma_dev *dev;
int i, ret;
#if defined(CONFIG_SOC_AU1100)
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
if (au1000_dma_table[i].dev_id < 0)
break;
}
if (i == NUM_AU1000_DMA_CHANNELS)
return -ENODEV;
chan = &au1000_dma_table[i];
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
} else {
dev = &dma_dev_table[dev_id];
}
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
if ((ret = request_irq(chan->irq, irqhandler, irqflags,
dev_str, chan->irq_dev))) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
}
} else {
chan->irq = 0;
chan->irq_dev = NULL;
}
// fill it in
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dev->fifo_addr;
chan->mode = dev->dma_mode;
/* initialize the channel before returning */
init_dma(i);
return i;
}
EXPORT_SYMBOL(request_au1000_dma);
void free_au1000_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
if (!chan) {
printk("Trying to free DMA%d\n", dmanr);
return;
}
disable_dma(dmanr);
if (chan->irq)
free_irq(chan->irq, chan->irq_dev);
chan->irq = 0;
chan->irq_dev = NULL;
chan->dev_id = -1;
}
EXPORT_SYMBOL(free_au1000_dma);
#endif // AU1000 AU1500 AU1100