blob: c196f38453056b54eee53634faafa3345b197552 [file] [log] [blame]
/*
* drivers/usb/driver.c - most of the driver model stuff for usb
*
* (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
*
* based on drivers/usb/usb.c which had the following copyrights:
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
* (C) Copyright Andreas Gal 1999
* (C) Copyright Gregory P. Smith 1999
* (C) Copyright Deti Fliegl 1999 (new USB architecture)
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2004
* (C) Copyright Yggdrasil Computing, Inc. 2000
* (usb_device_id matching changes by Adam J. Richter)
* (C) Copyright Greg Kroah-Hartman 2002-2003
*
* NOTE! This is not actually a driver at all, rather this is
* just a collection of helper routines that implement the
* generic USB things that the real drivers can use..
*
*/
#include <linux/config.h>
#include <linux/device.h>
#include <linux/usb.h>
#include "hcd.h"
#include "usb.h"
static int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id);
struct usb_dynid {
struct list_head node;
struct usb_device_id id;
};
static int generic_probe(struct device *dev)
{
return 0;
}
static int generic_remove(struct device *dev)
{
struct usb_device *udev = to_usb_device(dev);
/* if this is only an unbind, not a physical disconnect, then
* unconfigure the device */
if (udev->state == USB_STATE_CONFIGURED)
usb_set_configuration(udev, 0);
/* in case the call failed or the device was suspended */
if (udev->state >= USB_STATE_CONFIGURED)
usb_disable_device(udev, 0);
return 0;
}
struct device_driver usb_generic_driver = {
.owner = THIS_MODULE,
.name = "usb",
.bus = &usb_bus_type,
.probe = generic_probe,
.remove = generic_remove,
};
/* Fun hack to determine if the struct device is a
* usb device or a usb interface. */
int usb_generic_driver_data;
#ifdef CONFIG_HOTPLUG
/*
* Adds a new dynamic USBdevice ID to this driver,
* and cause the driver to probe for all devices again.
*/
static ssize_t store_new_id(struct device_driver *driver,
const char *buf, size_t count)
{
struct usb_driver *usb_drv = to_usb_driver(driver);
struct usb_dynid *dynid;
u32 idVendor = 0;
u32 idProduct = 0;
int fields = 0;
fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
if (fields < 2)
return -EINVAL;
dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
if (!dynid)
return -ENOMEM;
INIT_LIST_HEAD(&dynid->node);
dynid->id.idVendor = idVendor;
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
spin_lock(&usb_drv->dynids.lock);
list_add_tail(&usb_drv->dynids.list, &dynid->node);
spin_unlock(&usb_drv->dynids.lock);
if (get_driver(driver)) {
driver_attach(driver);
put_driver(driver);
}
return count;
}
static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
static int usb_create_newid_file(struct usb_driver *usb_drv)
{
int error = 0;
if (usb_drv->no_dynamic_id)
goto exit;
if (usb_drv->probe != NULL)
error = sysfs_create_file(&usb_drv->driver.kobj,
&driver_attr_new_id.attr);
exit:
return error;
}
static void usb_remove_newid_file(struct usb_driver *usb_drv)
{
if (usb_drv->no_dynamic_id)
return;
if (usb_drv->probe != NULL)
sysfs_remove_file(&usb_drv->driver.kobj,
&driver_attr_new_id.attr);
}
static void usb_free_dynids(struct usb_driver *usb_drv)
{
struct usb_dynid *dynid, *n;
spin_lock(&usb_drv->dynids.lock);
list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) {
list_del(&dynid->node);
kfree(dynid);
}
spin_unlock(&usb_drv->dynids.lock);
}
#else
static inline int usb_create_newid_file(struct usb_driver *usb_drv)
{
return 0;
}
static void usb_remove_newid_file(struct usb_driver *usb_drv)
{
}
static inline void usb_free_dynids(struct usb_driver *usb_drv)
{
}
#endif
static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
struct usb_driver *drv)
{
struct usb_dynid *dynid;
spin_lock(&drv->dynids.lock);
list_for_each_entry(dynid, &drv->dynids.list, node) {
if (usb_match_one_id(intf, &dynid->id)) {
spin_unlock(&drv->dynids.lock);
return &dynid->id;
}
}
spin_unlock(&drv->dynids.lock);
return NULL;
}
/* called from driver core with usb_bus_type.subsys writelock */
static int usb_probe_interface(struct device *dev)
{
struct usb_interface * intf = to_usb_interface(dev);
struct usb_driver * driver = to_usb_driver(dev->driver);
const struct usb_device_id *id;
int error = -ENODEV;
dev_dbg(dev, "%s\n", __FUNCTION__);
if (!driver->probe)
return error;
/* FIXME we'd much prefer to just resume it ... */
if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
id = usb_match_id(intf, driver->id_table);
if (!id)
id = usb_match_dynamic_id(intf, driver);
if (id) {
dev_dbg(dev, "%s - got id\n", __FUNCTION__);
/* Interface "power state" doesn't correspond to any hardware
* state whatsoever. We use it to record when it's bound to
* a driver that may start I/0: it's not frozen/quiesced.
*/
mark_active(intf);
intf->condition = USB_INTERFACE_BINDING;
error = driver->probe(intf, id);
if (error) {
mark_quiesced(intf);
intf->condition = USB_INTERFACE_UNBOUND;
} else
intf->condition = USB_INTERFACE_BOUND;
}
return error;
}
/* called from driver core with usb_bus_type.subsys writelock */
static int usb_unbind_interface(struct device *dev)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usb_driver *driver = to_usb_driver(intf->dev.driver);
intf->condition = USB_INTERFACE_UNBINDING;
/* release all urbs for this interface */
usb_disable_interface(interface_to_usbdev(intf), intf);
if (driver && driver->disconnect)
driver->disconnect(intf);
/* reset other interface state */
usb_set_interface(interface_to_usbdev(intf),
intf->altsetting[0].desc.bInterfaceNumber,
0);
usb_set_intfdata(intf, NULL);
intf->condition = USB_INTERFACE_UNBOUND;
mark_quiesced(intf);
return 0;
}
/* returns 0 if no match, 1 if match */
static int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_host_interface *intf;
struct usb_device *dev;
/* proc_connectinfo in devio.c may call us with id == NULL. */
if (id == NULL)
return 0;
intf = interface->cur_altsetting;
dev = interface_to_usbdev(interface);
if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
return 0;
/* No need to test id->bcdDevice_lo != 0, since 0 is never
greater than any unsigned number. */
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
(id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
(id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
(id->bDeviceClass != dev->descriptor.bDeviceClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
(id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
(id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
(id->bInterfaceClass != intf->desc.bInterfaceClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
(id->bInterfaceSubClass != intf->desc.bInterfaceSubClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
(id->bInterfaceProtocol != intf->desc.bInterfaceProtocol))
return 0;
return 1;
}
/**
* usb_match_id - find first usb_device_id matching device or interface
* @interface: the interface of interest
* @id: array of usb_device_id structures, terminated by zero entry
*
* usb_match_id searches an array of usb_device_id's and returns
* the first one matching the device or interface, or null.
* This is used when binding (or rebinding) a driver to an interface.
* Most USB device drivers will use this indirectly, through the usb core,
* but some layered driver frameworks use it directly.
* These device tables are exported with MODULE_DEVICE_TABLE, through
* modutils, to support the driver loading functionality of USB hotplugging.
*
* What Matches:
*
* The "match_flags" element in a usb_device_id controls which
* members are used. If the corresponding bit is set, the
* value in the device_id must match its corresponding member
* in the device or interface descriptor, or else the device_id
* does not match.
*
* "driver_info" is normally used only by device drivers,
* but you can create a wildcard "matches anything" usb_device_id
* as a driver's "modules.usbmap" entry if you provide an id with
* only a nonzero "driver_info" field. If you do this, the USB device
* driver's probe() routine should use additional intelligence to
* decide whether to bind to the specified interface.
*
* What Makes Good usb_device_id Tables:
*
* The match algorithm is very simple, so that intelligence in
* driver selection must come from smart driver id records.
* Unless you have good reasons to use another selection policy,
* provide match elements only in related groups, and order match
* specifiers from specific to general. Use the macros provided
* for that purpose if you can.
*
* The most specific match specifiers use device descriptor
* data. These are commonly used with product-specific matches;
* the USB_DEVICE macro lets you provide vendor and product IDs,
* and you can also match against ranges of product revisions.
* These are widely used for devices with application or vendor
* specific bDeviceClass values.
*
* Matches based on device class/subclass/protocol specifications
* are slightly more general; use the USB_DEVICE_INFO macro, or
* its siblings. These are used with single-function devices
* where bDeviceClass doesn't specify that each interface has
* its own class.
*
* Matches based on interface class/subclass/protocol are the
* most general; they let drivers bind to any interface on a
* multiple-function device. Use the USB_INTERFACE_INFO
* macro, or its siblings, to match class-per-interface style
* devices (as recorded in bDeviceClass).
*
* Within those groups, remember that not all combinations are
* meaningful. For example, don't give a product version range
* without vendor and product IDs; or specify a protocol without
* its associated class and subclass.
*/
const struct usb_device_id *usb_match_id(struct usb_interface *interface,
const struct usb_device_id *id)
{
/* proc_connectinfo in devio.c may call us with id == NULL. */
if (id == NULL)
return NULL;
/* It is important to check that id->driver_info is nonzero,
since an entry that is all zeroes except for a nonzero
id->driver_info is the way to create an entry that
indicates that the driver want to examine every
device and interface. */
for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
id->driver_info; id++) {
if (usb_match_one_id(interface, id))
return id;
}
return NULL;
}
EXPORT_SYMBOL_GPL_FUTURE(usb_match_id);
int usb_device_match(struct device *dev, struct device_driver *drv)
{
struct usb_interface *intf;
struct usb_driver *usb_drv;
const struct usb_device_id *id;
/* check for generic driver, which we don't match any device with */
if (drv == &usb_generic_driver)
return 0;
intf = to_usb_interface(dev);
usb_drv = to_usb_driver(drv);
id = usb_match_id(intf, usb_drv->id_table);
if (id)
return 1;
id = usb_match_dynamic_id(intf, usb_drv);
if (id)
return 1;
return 0;
}
/**
* usb_register_driver - register a USB driver
* @new_driver: USB operations for the driver
* @owner: module owner of this driver.
*
* Registers a USB driver with the USB core. The list of unattached
* interfaces will be rescanned whenever a new driver is added, allowing
* the new driver to attach to any recognized devices.
* Returns a negative error code on failure and 0 on success.
*
* NOTE: if you want your driver to use the USB major number, you must call
* usb_register_dev() to enable that functionality. This function no longer
* takes care of that.
*/
int usb_register_driver(struct usb_driver *new_driver, struct module *owner)
{
int retval = 0;
if (usb_disabled())
return -ENODEV;
new_driver->driver.name = (char *)new_driver->name;
new_driver->driver.bus = &usb_bus_type;
new_driver->driver.probe = usb_probe_interface;
new_driver->driver.remove = usb_unbind_interface;
new_driver->driver.owner = owner;
spin_lock_init(&new_driver->dynids.lock);
INIT_LIST_HEAD(&new_driver->dynids.list);
retval = driver_register(&new_driver->driver);
if (!retval) {
pr_info("%s: registered new driver %s\n",
usbcore_name, new_driver->name);
usbfs_update_special();
usb_create_newid_file(new_driver);
} else {
printk(KERN_ERR "%s: error %d registering driver %s\n",
usbcore_name, retval, new_driver->name);
}
return retval;
}
EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver);
/**
* usb_deregister - unregister a USB driver
* @driver: USB operations of the driver to unregister
* Context: must be able to sleep
*
* Unlinks the specified driver from the internal USB driver list.
*
* NOTE: If you called usb_register_dev(), you still need to call
* usb_deregister_dev() to clean up your driver's allocated minor numbers,
* this * call will no longer do it for you.
*/
void usb_deregister(struct usb_driver *driver)
{
pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name);
usb_remove_newid_file(driver);
usb_free_dynids(driver);
driver_unregister(&driver->driver);
usbfs_update_special();
}
EXPORT_SYMBOL_GPL_FUTURE(usb_deregister);