blob: 8474b05b795aaf3b5dd5e3a7e33c87526eceafa8 [file] [log] [blame]
/*
* Board setup routines for the esd CPCI-405 cPCI Board.
*
* Copyright 2001-2006 esd electronic system design - hannover germany
*
* Authors: Matthias Fuchs
* matthias.fuchs@esd-electronics.com
* Stefan Roese
* stefan.roese@esd-electronics.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/todc.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/ocp.h>
#include <asm/ibm_ocp_pci.h>
#include <platforms/4xx/ibm405gp.h>
#ifdef CONFIG_GEN_RTC
void *cpci405_nvram;
#endif
extern bd_t __res;
/*
* Some IRQs unique to CPCI-405.
*/
int __init
ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{28, 29, 30, 27}, /* IDSEL 15 - cPCI slot 8 */
{29, 30, 27, 28}, /* IDSEL 16 - cPCI slot 7 */
{30, 27, 28, 29}, /* IDSEL 17 - cPCI slot 6 */
{27, 28, 29, 30}, /* IDSEL 18 - cPCI slot 5 */
{28, 29, 30, 27}, /* IDSEL 19 - cPCI slot 4 */
{29, 30, 27, 28}, /* IDSEL 20 - cPCI slot 3 */
{30, 27, 28, 29}, /* IDSEL 21 - cPCI slot 2 */
};
const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
/* The serial clock for the chip is an internal clock determined by
* different clock speeds/dividers.
* Calculate the proper input baud rate and setup the serial driver.
*/
static void __init
cpci405_early_serial_map(void)
{
u32 uart_div;
int uart_clock;
struct uart_port port;
/* Calculate the serial clock input frequency
*
* The uart clock is the cpu frequency (provided in the board info
* structure) divided by the external UART Divisor.
*/
uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
uart_clock = __res.bi_procfreq / uart_div;
/* Setup serial port access */
memset(&port, 0, sizeof(port));
#if defined(CONFIG_UART0_TTYS0)
port.membase = (void*)UART0_IO_BASE;
port.irq = UART0_INT;
#else
port.membase = (void*)UART1_IO_BASE;
port.irq = UART1_INT;
#endif
port.uartclk = uart_clock;
port.regshift = 0;
port.iotype = UPIO_MEM;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
#if defined(CONFIG_UART0_TTYS0)
port.membase = (void*)UART1_IO_BASE;
port.irq = UART1_INT;
#else
port.membase = (void*)UART0_IO_BASE;
port.irq = UART0_INT;
#endif
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
}
void __init
cpci405_setup_arch(void)
{
ppc4xx_setup_arch();
ibm_ocp_set_emac(0, 0);
cpci405_early_serial_map();
#ifdef CONFIG_GEN_RTC
TODC_INIT(TODC_TYPE_MK48T35,
cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
#endif
}
void __init
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
#ifdef CONFIG_PCI
unsigned int bar_response, bar;
/* Disable region first */
out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
/* PLB starting addr, PCI: 0x80000000 */
out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
/* PCI start addr, 0x80000000 */
out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
/* 512MB range of PLB to PCI */
out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
/* Enable no pre-fetch, enable region */
out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
(PPC405_PCI_UPPER_MEM -
PPC405_PCI_MEM_BASE)) | 0x01));
/* Disable region one */
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x00000001);
/* Disable region two */
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
out_le32((void *) &(pcip->ptm2la), 0x00000000);
/* Zero config bars */
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
0x00000000);
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
}
#endif
}
void __init
cpci405_map_io(void)
{
ppc4xx_map_io();
#ifdef CONFIG_GEN_RTC
cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
#endif
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = cpci405_setup_arch;
ppc_md.setup_io_mappings = cpci405_map_io;
#ifdef CONFIG_GEN_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
}