blob: 9afa5ab24d260855f0fff8f1471af9e2733c30bf [file] [log] [blame]
/*----------------------------------------------------------------------------+
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
|
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
|
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
|
| COPYRIGHT I B M CORPORATION 1999
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------+
| Author: Maciej P. Tyrlik
| Component: Include file.
| File: stb.h
| Purpose: Common Set-tob-box definitions.
| Changes:
| Date: Comment:
| ----- --------
| 14-Jan-97 Created for ElPaso pass 1 MPT
| 13-May-97 Added function prototype and global variables MPT
| 08-Dec-98 Added RAW IR task information MPT
| 19-Jan-99 Port to Romeo MPT
| 19-May-00 Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF RLB
+----------------------------------------------------------------------------*/
#ifndef _stb_h_
#define _stb_h_
/*----------------------------------------------------------------------------+
| Read/write from I/O macros.
+----------------------------------------------------------------------------*/
#define inbyte(port) (*((unsigned char volatile *)(port)))
#define outbyte(port,data) *(unsigned char volatile *)(port)=\
(unsigned char)(data)
#define inshort(port) (*((unsigned short volatile *)(port)))
#define outshort(port,data) *(unsigned short volatile *)(port)=\
(unsigned short)(data)
#define inword(port) (*((unsigned long volatile *)(port)))
#define outword(port,data) *(unsigned long volatile *)(port)=\
(unsigned long)(data)
/*----------------------------------------------------------------------------+
| STB interrupts.
+----------------------------------------------------------------------------*/
#define STB_XP_TP_INT 0
#define STB_XP_APP_INT 1
#define STB_AUD_INT 2
#define STB_VID_INT 3
#define STB_DMA0_INT 4
#define STB_DMA1_INT 5
#define STB_DMA2_INT 6
#define STB_DMA3_INT 7
#define STB_SCI_INT 8
#define STB_I2C1_INT 9
#define STB_I2C2_INT 10
#define STB_GPT_PWM0 11
#define STB_GPT_PWM1 12
#define STB_SCP_INT 13
#define STB_SSP_INT 14
#define STB_GPT_PWM2 15
#define STB_EXT5_INT 16
#define STB_EXT6_INT 17
#define STB_EXT7_INT 18
#define STB_EXT8_INT 19
#define STB_SCC_INT 20
#define STB_SICC_RECV_INT 21
#define STB_SICC_TRAN_INT 22
#define STB_PPU_INT 23
#define STB_DCRX_INT 24
#define STB_EXT0_INT 25
#define STB_EXT1_INT 26
#define STB_EXT2_INT 27
#define STB_EXT3_INT 28
#define STB_EXT4_INT 29
#define STB_REDWOOD_ENET_INT STB_EXT1_INT
/*----------------------------------------------------------------------------+
| STB tasks, task stack sizes, and task priorities. The actual task priority
| is 1 more than the specified number since priority 0 is reserved (system
| internally adds 1 to supplied priority number).
+----------------------------------------------------------------------------*/
#define STB_IDLE_TASK_SS (5* 1024)
#define STB_IDLE_TASK_PRIO 0
#define STB_LEDTEST_SS (2* 1024)
#define STB_LEDTEST_PRIO 0
#define STB_CURSOR_TASK_SS (10* 1024)
#define STB_CURSOR_TASK_PRIO 7
#define STB_MPEG_TASK_SS (10* 1024)
#define STB_MPEG_TASK_PRIO 9
#define STB_DEMUX_TASK_SS (10* 1024)
#define STB_DEMUX_TASK_PRIO 20
#define RAW_STB_IR_TASK_SS (10* 1024)
#define RAW_STB_IR_TASK_PRIO 20
#define STB_SERIAL_ER_TASK_SS (10* 1024)
#define STB_SERIAL_ER_TASK_PRIO 1
#define STB_CA_TASK_SS (10* 1024)
#define STB_CA_TASK_PRIO 8
#define INIT_DEFAULT_VIDEO_SS (10* 1024)
#define INIT_DEFAULT_VIDEO_PRIO 8
#define INIT_DEFAULT_SERVI_SS (10* 1024)
#define INIT_DEFAULT_SERVI_PRIO 8
#define INIT_DEFAULT_POST_SS (10* 1024)
#define INIT_DEFAULT_POST_PRIO 8
#define INIT_DEFAULT_INTER_SS (10* 1024)
#define INIT_DEFAULT_INTER_PRIO 8
#define INIT_DEFAULT_BR_SS (10* 1024)
#define INIT_DEFAULT_BR_PRIO 8
#define INITIAL_TASK_STACK_SIZE (32* 1024)
#ifdef VESTA
/*----------------------------------------------------------------------------+
| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the
| address is not decoded. Numbers below are dependent on board configuration.
| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.
|
| FFE0,0000 - FFFF,FFFF FLASH
| F200,0000 - F210,FFFF FPGA logic
| Ethernet = F200,0000
| LED Display = F200,0100
| Xilinx #1 Regs = F204,0000
| Xilinx #2 Regs = F208,0000
| Spare = F20C,0000
| IDE CS0 = F210,0000
| F410,0000 - F410,FFFF IDE CS1
| C000,0000 - C7FF,FFFF OBP
| C000,0000 - C000,0014 SICC (16550 + infra red)
| C001,0000 - C001,0018 PPU (Parallel Port)
| C002,0000 - C002,001B SC0 (Smart Card 0)
| C003,0000 - C003,000F I2C0
| C004,0000 - C004,0009 SCC (16550 UART)
| C005,0000 - C005,0124 GPT (Timers)
| C006,0000 - C006,0058 GPIO0
| C007,0000 - C007,001b SC1 (Smart Card 1)
| C008,0000 - C008,FFFF Unused
| C009,0000 - C009,FFFF Unused
| C00A,0000 - C00A,FFFF Unused
| C00B,0000 - C00B,000F I2C1
| C00C,0000 - C00C,0006 SCP
| C00D,0000 - C00D,0010 SSP
| A000,0000 - A0FF,FFFF SDRAM1 (16M)
| 0000,0000 - 00FF,FFFF SDRAM0 (16M)
+----------------------------------------------------------------------------*/
#define STB_FLASH_BASE_ADDRESS 0xFFE00000
#define STB_FPGA_BASE_ADDRESS 0xF2000000
#define STB_SICC_BASE_ADDRESS 0xC0000000
#define STB_PPU_BASE_ADDR 0xC0010000
#define STB_SC0_BASE_ADDRESS 0xC0020000
#define STB_I2C1_BASE_ADDRESS 0xC0030000
#define STB_SCC_BASE_ADDRESS 0xC0040000
#define STB_TIMERS_BASE_ADDRESS 0xC0050000
#define STB_GPIO0_BASE_ADDRESS 0xC0060000
#define STB_SC1_BASE_ADDRESS 0xC0070000
#define STB_I2C2_BASE_ADDRESS 0xC00B0000
#define STB_SCP_BASE_ADDRESS 0xC00C0000
#define STB_SSP_BASE_ADDRESS 0xC00D0000
/*----------------------------------------------------------------------------+
|The following are used by the IBM RTOS SW.
|15-May-00 Changed these values to reflect movement of base addresses in
|order to support 32MB of contiguous SDRAM space.
|Points to the cacheable region since these values are used in IBM RTOS
|to establish the vector address.
+----------------------------------------------------------------------------*/
#define STB_SDRAM1_BASE_ADDRESS 0x20000000
#define STB_SDRAM1_SIZE 0x01000000
#define STB_SDRAM0_BASE_ADDRESS 0x1F000000
#define STB_SDRAM0_SIZE 0x01000000
#else
/*----------------------------------------------------------------------------+
| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the
| address is not decoded. Numbers below are dependent on board configuration.
| FLASH, SDRAM, DRAM numbers can be affected by actual board setup. OPB
| devices are inside the ElPaso chip.
| FFE0,0000 - FFFF,FFFF FLASH
| F144,0000 - F104,FFFF FPGA logic
| F140,0000 - F100,0000 ethernet (through FPGA logic)
| C000,0000 - C7FF,FFFF OBP
| C000,0000 - C000,0014 SICC (16550+ infra red)
| C001,0000 - C001,0016 PPU (parallel port)
| C002,0000 - C002,001B SC (smart card)
| C003,0000 - C003,000F I2C 1
| C004,0000 - C004,0009 SCC (16550 UART)
| C005,0000 - C005,0124 Timers
| C006,0000 - C006,0058 GPIO0
| C007,0000 - C007,0058 GPIO1
| C008,0000 - C008,0058 GPIO2
| C009,0000 - C009,0058 GPIO3
| C00A,0000 - C00A,0058 GPIO4
| C00B,0000 - C00B,000F I2C 2
| C00C,0000 - C00C,0006 SCP
| C00D,0000 - C00D,0006 SSP
| A000,0000 - A0FF,FFFF SDRAM 16M
| 0000,0000 - 00FF,FFFF DRAM 16M
+----------------------------------------------------------------------------*/
#define STB_FLASH_BASE_ADDRESS 0xFFE00000
#define STB_FPGA_BASE_ADDRESS 0xF1440000
#define STB_ENET_BASE_ADDRESS 0xF1400000
#define STB_SICC_BASE_ADDRESS 0xC0000000
#define STB_PPU_BASE_ADDR 0xC0010000
#define STB_SC_BASE_ADDRESS 0xC0020000
#define STB_I2C1_BASE_ADDRESS 0xC0030000
#define STB_SCC_BASE_ADDRESS 0xC0040000
#define STB_TIMERS_BASE_ADDRESS 0xC0050000
#define STB_GPIO0_BASE_ADDRESS 0xC0060000
#define STB_GPIO1_BASE_ADDRESS 0xC0070000
#define STB_GPIO2_BASE_ADDRESS 0xC0080000
#define STB_GPIO3_BASE_ADDRESS 0xC0090000
#define STB_GPIO4_BASE_ADDRESS 0xC00A0000
#define STB_I2C2_BASE_ADDRESS 0xC00B0000
#define STB_SCP_BASE_ADDRESS 0xC00C0000
#define STB_SSP_BASE_ADDRESS 0xC00D0000
#define STB_SDRAM_BASE_ADDRESS 0xA0000000
#endif
/*----------------------------------------------------------------------------+
| Other common defines.
+----------------------------------------------------------------------------*/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#endif /* _stb_h_ */