| /* |
| * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ |
| #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ |
| |
| /*! |
| * @name PBC Controller parameters |
| */ |
| /*! @{ */ |
| /*! |
| * Base address of PBC controller |
| */ |
| #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) |
| /* Offsets for the PBC Controller register */ |
| /*! |
| * PBC Board status register offset |
| */ |
| #define PBC_BSTAT 0x000002 |
| /*! |
| * PBC Board control register 1 set address. |
| */ |
| #define PBC_BCTRL1_SET 0x000004 |
| /*! |
| * PBC Board control register 1 clear address. |
| */ |
| #define PBC_BCTRL1_CLEAR 0x000006 |
| /*! |
| * PBC Board control register 2 set address. |
| */ |
| #define PBC_BCTRL2_SET 0x000008 |
| /*! |
| * PBC Board control register 2 clear address. |
| */ |
| #define PBC_BCTRL2_CLEAR 0x00000A |
| /*! |
| * PBC Board control register 3 set address. |
| */ |
| #define PBC_BCTRL3_SET 0x00000C |
| /*! |
| * PBC Board control register 3 clear address. |
| */ |
| #define PBC_BCTRL3_CLEAR 0x00000E |
| /*! |
| * PBC Board control register 4 set address. |
| */ |
| #define PBC_BCTRL4_SET 0x000010 |
| /*! |
| * PBC Board control register 4 clear address. |
| */ |
| #define PBC_BCTRL4_CLEAR 0x000012 |
| /*! |
| * PBC Board status register 1. |
| */ |
| #define PBC_BSTAT1 0x000014 |
| /*! |
| * PBC Board interrupt status register. |
| */ |
| #define PBC_INTSTATUS 0x000016 |
| /*! |
| * PBC Board interrupt current status register. |
| */ |
| #define PBC_INTCURR_STATUS 0x000018 |
| /*! |
| * PBC Interrupt mask register set address. |
| */ |
| #define PBC_INTMASK_SET 0x00001A |
| /*! |
| * PBC Interrupt mask register clear address. |
| */ |
| #define PBC_INTMASK_CLEAR 0x00001C |
| |
| /*! |
| * External UART A. |
| */ |
| #define PBC_SC16C652_UARTA 0x010000 |
| /*! |
| * External UART B. |
| */ |
| #define PBC_SC16C652_UARTB 0x010010 |
| /*! |
| * Ethernet Controller IO base address. |
| */ |
| #define PBC_CS8900A_IOBASE 0x020000 |
| /*! |
| * Ethernet Controller Memory base address. |
| */ |
| #define PBC_CS8900A_MEMBASE 0x021000 |
| /*! |
| * Ethernet Controller DMA base address. |
| */ |
| #define PBC_CS8900A_DMABASE 0x022000 |
| /*! |
| * External chip select 0. |
| */ |
| #define PBC_XCS0 0x040000 |
| /*! |
| * LCD Display enable. |
| */ |
| #define PBC_LCD_EN_B 0x060000 |
| /*! |
| * Code test debug enable. |
| */ |
| #define PBC_CODE_B 0x070000 |
| /*! |
| * PSRAM memory select. |
| */ |
| #define PBC_PSRAM_B 0x5000000 |
| |
| #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) |
| #define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) |
| #define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) |
| #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) |
| #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) |
| |
| #define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) |
| #define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) |
| #define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) |
| #define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) |
| #define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) |
| #define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) |
| #define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) |
| #define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) |
| #define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) |
| #define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) |
| #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) |
| #define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) |
| #define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) |
| #define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) |
| #define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) |
| #define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) |
| |
| #define MXC_MAX_EXP_IO_LINES 16 |
| |
| #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ |
