blob: be4b72f4f49ae8bfec9c87d4fdc9bdbecc203f39 [file] [log] [blame]
/*
* Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
*
* Copyright (c) 2003 Intracom S.A.
* by Pantelis Antoniou <panto@intracom.gr>
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/platform_device.h>
#include <linux/mdio-bitbang.h>
#include <linux/of_platform.h>
#include "fs_enet.h"
struct bb_info {
struct mdiobb_ctrl ctrl;
__be32 __iomem *dir;
__be32 __iomem *dat;
u32 mdio_msk;
u32 mdc_msk;
};
/* FIXME: If any other users of GPIO crop up, then these will have to
* have some sort of global synchronization to avoid races with other
* pins on the same port. The ideal solution would probably be to
* bind the ports to a GPIO driver, and have this be a client of it.
*/
static inline void bb_set(u32 __iomem *p, u32 m)
{
out_be32(p, in_be32(p) | m);
}
static inline void bb_clr(u32 __iomem *p, u32 m)
{
out_be32(p, in_be32(p) & ~m);
}
static inline int bb_read(u32 __iomem *p, u32 m)
{
return (in_be32(p) & m) != 0;
}
static inline void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (dir)
bb_set(bitbang->dir, bitbang->mdio_msk);
else
bb_clr(bitbang->dir, bitbang->mdio_msk);
/* Read back to flush the write. */
in_be32(bitbang->dir);
}
static inline int mdio_read(struct mdiobb_ctrl *ctrl)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
return bb_read(bitbang->dat, bitbang->mdio_msk);
}
static inline void mdio(struct mdiobb_ctrl *ctrl, int what)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
bb_set(bitbang->dat, bitbang->mdio_msk);
else
bb_clr(bitbang->dat, bitbang->mdio_msk);
/* Read back to flush the write. */
in_be32(bitbang->dat);
}
static inline void mdc(struct mdiobb_ctrl *ctrl, int what)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
bb_set(bitbang->dat, bitbang->mdc_msk);
else
bb_clr(bitbang->dat, bitbang->mdc_msk);
/* Read back to flush the write. */
in_be32(bitbang->dat);
}
static struct mdiobb_ops bb_ops = {
.owner = THIS_MODULE,
.set_mdc = mdc,
.set_mdio_dir = mdio_dir,
.set_mdio_data = mdio,
.get_mdio_data = mdio_read,
};
static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
struct device_node *np)
{
struct resource res;
const u32 *data;
int mdio_pin, mdc_pin, len;
struct bb_info *bitbang = bus->priv;
int ret = of_address_to_resource(np, 0, &res);
if (ret)
return ret;
if (res.end - res.start < 13)
return -ENODEV;
/* This should really encode the pin number as well, but all
* we get is an int, and the odds of multiple bitbang mdio buses
* is low enough that it's not worth going too crazy.
*/
snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
data = of_get_property(np, "fsl,mdio-pin", &len);
if (!data || len != 4)
return -ENODEV;
mdio_pin = *data;
data = of_get_property(np, "fsl,mdc-pin", &len);
if (!data || len != 4)
return -ENODEV;
mdc_pin = *data;
bitbang->dir = ioremap(res.start, res.end - res.start + 1);
if (!bitbang->dir)
return -ENOMEM;
bitbang->dat = bitbang->dir + 4;
bitbang->mdio_msk = 1 << (31 - mdio_pin);
bitbang->mdc_msk = 1 << (31 - mdc_pin);
return 0;
}
static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
{
const u32 *data;
int len, id, irq;
data = of_get_property(np, "reg", &len);
if (!data || len != 4)
return;
id = *data;
bus->phy_mask &= ~(1 << id);
irq = of_irq_to_resource(np, 0, NULL);
if (irq != NO_IRQ)
bus->irq[id] = irq;
}
static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = NULL;
struct mii_bus *new_bus;
struct bb_info *bitbang;
int ret = -ENOMEM;
int i;
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
if (!bitbang)
goto out;
bitbang->ctrl.ops = &bb_ops;
new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!new_bus)
goto out_free_priv;
new_bus->name = "CPM2 Bitbanged MII",
ret = fs_mii_bitbang_init(new_bus, ofdev->node);
if (ret)
goto out_free_bus;
new_bus->phy_mask = ~0;
new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
if (!new_bus->irq)
goto out_unmap_regs;
for (i = 0; i < PHY_MAX_ADDR; i++)
new_bus->irq[i] = -1;
while ((np = of_get_next_child(ofdev->node, np)))
if (!strcmp(np->type, "ethernet-phy"))
add_phy(new_bus, np);
new_bus->dev = &ofdev->dev;
dev_set_drvdata(&ofdev->dev, new_bus);
ret = mdiobus_register(new_bus);
if (ret)
goto out_free_irqs;
return 0;
out_free_irqs:
dev_set_drvdata(&ofdev->dev, NULL);
kfree(new_bus->irq);
out_unmap_regs:
iounmap(bitbang->dir);
out_free_bus:
kfree(new_bus);
out_free_priv:
free_mdio_bitbang(new_bus);
out:
return ret;
}
static int fs_enet_mdio_remove(struct of_device *ofdev)
{
struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
struct bb_info *bitbang = bus->priv;
mdiobus_unregister(bus);
free_mdio_bitbang(bus);
dev_set_drvdata(&ofdev->dev, NULL);
kfree(bus->irq);
iounmap(bitbang->dir);
kfree(bitbang);
kfree(bus);
return 0;
}
static struct of_device_id fs_enet_mdio_bb_match[] = {
{
.compatible = "fsl,cpm2-mdio-bitbang",
},
{},
};
static struct of_platform_driver fs_enet_bb_mdio_driver = {
.name = "fsl-bb-mdio",
.match_table = fs_enet_mdio_bb_match,
.probe = fs_enet_mdio_probe,
.remove = fs_enet_mdio_remove,
};
static int fs_enet_mdio_bb_init(void)
{
return of_register_platform_driver(&fs_enet_bb_mdio_driver);
}
static void fs_enet_mdio_bb_exit(void)
{
of_unregister_platform_driver(&fs_enet_bb_mdio_driver);
}
module_init(fs_enet_mdio_bb_init);
module_exit(fs_enet_mdio_bb_exit);