| /** |
| * @file me6000_ao.h |
| * |
| * @brief Meilhaus ME-6000 analog output subdevice class. |
| * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@meilhaus.de) |
| * @author Guenter Gebhardt |
| */ |
| |
| /* |
| * Copyright (C) 2007 Meilhaus Electronic GmbH (support@meilhaus.de) |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef _ME6000_AO_H_ |
| #define _ME6000_AO_H_ |
| |
| #include "mesubdevice.h" |
| #include "mecirc_buf.h" |
| #include "meioctl.h" |
| |
| #ifdef __KERNEL__ |
| |
| #define ME6000_AO_MAX_SUBDEVICES 16 |
| #define ME6000_AO_FIFO_COUNT 8192 |
| |
| #define ME6000_AO_BASE_FREQUENCY 33000000L |
| |
| #define ME6000_AO_MIN_ACQ_TICKS 0LL |
| #define ME6000_AO_MAX_ACQ_TICKS 0LL |
| |
| #define ME6000_AO_MIN_CHAN_TICKS 66LL |
| #define ME6000_AO_MAX_CHAN_TICKS 0xFFFFFFFFLL |
| |
| #define ME6000_AO_MIN_RANGE -10000000 |
| #define ME6000_AO_MAX_RANGE 9999694 |
| |
| #define ME6000_AO_MIN_RANGE_HIGH 0 |
| #define ME6000_AO_MAX_RANGE_HIGH 49999237 |
| |
| #define ME6000_AO_MAX_DATA 0xFFFF |
| |
| #ifdef ME_SYNAPSE |
| # define ME6000_AO_CIRC_BUF_SIZE_ORDER 8 // 2^n PAGES =>> Maximum value of 1MB for Synapse |
| #else |
| # define ME6000_AO_CIRC_BUF_SIZE_ORDER 5 // 2^n PAGES =>> 128KB |
| #endif |
| #define ME6000_AO_CIRC_BUF_SIZE PAGE_SIZE<<ME6000_AO_CIRC_BUF_SIZE_ORDER // Buffer size in bytes. |
| |
| # ifdef _CBUFF_32b_t |
| # define ME6000_AO_CIRC_BUF_COUNT ((ME6000_AO_CIRC_BUF_SIZE) / sizeof(uint32_t)) // Size in values |
| # else |
| # define ME6000_AO_CIRC_BUF_COUNT ((ME6000_AO_CIRC_BUF_SIZE) / sizeof(uint16_t)) // Size in values |
| # endif |
| |
| # define ME6000_AO_CONTINOUS 0x0 |
| # define ME6000_AO_WRAP_MODE 0x1 |
| # define ME6000_AO_HW_MODE 0x2 |
| |
| # define ME6000_AO_HW_WRAP_MODE (ME6000_AO_WRAP_MODE | ME6000_AO_HW_MODE) |
| # define ME6000_AO_SW_WRAP_MODE ME6000_AO_WRAP_MODE |
| |
| # define ME6000_AO_INF_STOP_MODE 0x0 |
| # define ME6000_AO_ACQ_STOP_MODE 0x1 |
| # define ME6000_AO_SCAN_STOP_MODE 0x2 |
| |
| # define ME6000_AO_EXTRA_HARDWARE 0x1 |
| # define ME6000_AO_HAS_FIFO 0x2 |
| |
| typedef enum ME6000_AO_STATUS { |
| ao_status_none = 0, |
| ao_status_single_configured, |
| ao_status_single_run_wait, |
| ao_status_single_run, |
| ao_status_single_end_wait, |
| ao_status_single_end, |
| ao_status_stream_configured, |
| ao_status_stream_run_wait, |
| ao_status_stream_run, |
| ao_status_stream_end_wait, |
| ao_status_stream_end, |
| ao_status_stream_fifo_error, |
| ao_status_stream_buffer_error, |
| ao_status_stream_error, |
| ao_status_last |
| } ME6000_AO_STATUS; |
| |
| typedef struct me6000_ao_timeout { |
| unsigned long start_time; |
| unsigned long delay; |
| } me6000_ao_timeout_t; |
| |
| /** |
| * @brief The ME-6000 analog output subdevice class. |
| */ |
| typedef struct me6000_ao_subdevice { |
| /* Inheritance */ |
| me_subdevice_t base; /**< The subdevice base class. */ |
| unsigned int ao_idx; |
| |
| /* Attributes */ |
| spinlock_t subdevice_lock; /**< Spin lock to protect the subdevice from concurrent access. */ |
| spinlock_t *preload_reg_lock; /**< Spin lock to protect preload_reg from concurrent access. */ |
| |
| uint32_t *preload_flags; |
| uint32_t *triggering_flags; |
| |
| /* Hardware feautres */ |
| unsigned int irq; /**< The interrupt request number assigned by the PCI BIOS. */ |
| int fifo; /**< If set this device has a FIFO. */ |
| |
| //Range |
| int min; |
| int max; |
| |
| int single_value; /**< Mirror of the output value in single mode. */ |
| int single_value_in_fifo; /**< Mirror of the value written in single mode. */ |
| uint32_t ctrl_trg; /**< Mirror of the trigger settings. */ |
| |
| volatile int mode; /**< Flags used for storing SW wraparound setup*/ |
| int stop_mode; /**< The user defined stop condition flag. */ |
| unsigned int start_mode; |
| unsigned int stop_count; /**< The user defined dates presentation end count. */ |
| unsigned int stop_data_count; /**< The stop presentation count. */ |
| unsigned int data_count; /**< The real presentation count. */ |
| unsigned int preloaded_count; /**< The next data addres in buffer. <= for wraparound mode. */ |
| int hardware_stop_delay; /**< The time that stop can take. This is only to not show hardware bug to user. */ |
| |
| volatile enum ME6000_AO_STATUS status; /**< The current stream status flag. */ |
| me6000_ao_timeout_t timeout; /**< The timeout for start in blocking and non-blocking mode. */ |
| |
| /* Registers *//**< All registers are 32 bits long. */ |
| unsigned long ctrl_reg; |
| unsigned long status_reg; |
| unsigned long fifo_reg; |
| unsigned long single_reg; |
| unsigned long timer_reg; |
| unsigned long irq_status_reg; |
| unsigned long preload_reg; |
| unsigned long irq_reset_reg; |
| #ifdef MEDEBUG_DEBUG_REG |
| unsigned long reg_base; |
| #endif |
| |
| /* Software buffer */ |
| me_circ_buf_t circ_buf; /**< Circular buffer holding measurment data. */ |
| wait_queue_head_t wait_queue; /**< Wait queue to put on tasks waiting for data to arrive. */ |
| |
| struct workqueue_struct *me6000_workqueue; |
| struct delayed_work ao_control_task; |
| |
| volatile int ao_control_task_flag; /**< Flag controling reexecuting of control task */ |
| |
| } me6000_ao_subdevice_t; |
| |
| /** |
| * @brief The constructor to generate a ME-6000 analog output subdevice instance. |
| * |
| * @param reg_base The register base address of the device as returned by the PCI BIOS. |
| * @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access. |
| * @param preload_flags Pointer to spin lock protecting the hold&trigger register from concurrent access. |
| * @param ao_idx Subdevice number. |
| * @param fifo Flag set if subdevice has hardware FIFO. |
| * @param irq IRQ number. |
| * @param high_range Flag set if subdevice has high curren output. |
| * @param me6000_wq Queue for asynchronous task (1 queue for all subdevice on 1 board). |
| * |
| * @return Pointer to new instance on success.\n |
| * NULL on error. |
| */ |
| me6000_ao_subdevice_t *me6000_ao_constructor(uint32_t reg_base, |
| spinlock_t * preload_reg_lock, |
| uint32_t * preload_flags, |
| uint32_t * triggering_flags, |
| int ao_idx, |
| int fifo, |
| int irq, |
| int high_range, |
| struct workqueue_struct |
| *me6000_wq); |
| |
| #endif //__KERNEL__ |
| #endif //_ME6000_AO_H_ |