blob: 26aea3f71c26feaeb62a5721824fe62e6714e414 [file] [log] [blame]
/*
* linux/arch/arm/mm/arm940.S: utility functions for ARM940T
*
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
#define CACHE_DLINESIZE 16
#define CACHE_DSEGMENTS 4
#define CACHE_DENTRIES 64
.text
/*
* cpu_arm940_proc_init()
* cpu_arm940_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm940_proc_init)
ENTRY(cpu_arm940_switch_mm)
mov pc, lr
/*
* cpu_arm940_proc_fin()
*/
ENTRY(cpu_arm940_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x00001000 @ i-cache
bic r0, r0, #0x00000004 @ d-cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
/*
* cpu_arm940_reset(loc)
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm940_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x00000005 @ .............c.p
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
/*
* cpu_arm940_do_idle()
*/
.align 5
ENTRY(cpu_arm940_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
/*
* flush_icache_all()
*
* Unconditionally clean and invalidate the entire icache.
*/
ENTRY(arm940_flush_icache_all)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mov pc, lr
ENDPROC(arm940_flush_icache_all)
/*
* flush_user_cache_all()
*/
ENTRY(arm940_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(arm940_flush_kern_cache_all)
mov r2, #VM_EXEC
/* FALLTHROUGH */
/*
* flush_user_cache_range(start, end, flags)
*
* There is no efficient way to flush a range of cache entries
* in the specified address range. Thus, flushes all.
*
* - start - start address (inclusive)
* - end - end address (exclusive)
* - flags - vm_flags describing address space
*/
ENTRY(arm940_flush_user_cache_range)
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
#else
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 3 to 0
#endif
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_coherent_kern_range)
/* FALLTHROUGH */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_coherent_user_range)
/* FALLTHROUGH */
/*
* flush_kern_dcache_area(void *addr, size_t size)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - kernel address
* - size - region size
*/
ENTRY(arm940_flush_kern_dcache_area)
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_inv_range(start, end)
*
* There is no efficient way to invalidate a specifid virtual
* address range. Thus, invalidates all.
*
* - start - virtual start address
* - end - virtual end address
*/
arm940_dma_inv_range:
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_clean_range(start, end)
*
* There is no efficient way to clean a specifid virtual
* address range. Thus, cleans all.
*
* - start - virtual start address
* - end - virtual end address
*/
arm940_dma_clean_range:
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
#endif
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_flush_range(start, end)
*
* There is no efficient way to clean and invalidate a specifid
* virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_dma_flush_range)
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(arm940_dma_map_area)
add r1, r1, r0
cmp r2, #DMA_TO_DEVICE
beq arm940_dma_clean_range
bcs arm940_dma_inv_range
b arm940_dma_flush_range
ENDPROC(arm940_dma_map_area)
/*
* dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(arm940_dma_unmap_area)
mov pc, lr
ENDPROC(arm940_dma_unmap_area)
ENTRY(arm940_cache_fns)
.long arm940_flush_icache_all
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
.long arm940_flush_user_cache_range
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_area
.long arm940_dma_map_area
.long arm940_dma_unmap_area
.long arm940_dma_flush_range
__CPUINIT
.type __arm940_setup, #function
__arm940_setup:
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7
mcr p15, 0, r0, c6, c4, 0
mcr p15, 0, r0, c6, c5, 0
mcr p15, 0, r0, c6, c6, 0
mcr p15, 0, r0, c6, c7, 0
mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7
mcr p15, 0, r0, c6, c4, 1
mcr p15, 0, r0, c6, c5, 1
mcr p15, 0, r0, c6, c6, 1
mcr p15, 0, r0, c6, c7, 1
mov r0, #0x0000003F @ base = 0, size = 4GB
mcr p15, 0, r0, c6, c0, 0 @ set area 0, default
mcr p15, 0, r0, c6, c0, 1
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM
mcr p15, 0, r0, c6, c1, 1
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH
mcr p15, 0, r0, c6, c2, 1
mov r0, #0x06
mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable
mcr p15, 0, r0, c2, c0, 1
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #0x00 @ disable whole write buffer
#else
mov r0, #0x02 @ Region 1 write bufferred
#endif
mcr p15, 0, r0, c3, c0, 0
mov r0, #0x10000
sub r0, r0, #1 @ r0 = 0xffff
mcr p15, 0, r0, c5, c0, 0 @ all read/write access
mcr p15, 0, r0, c5, c0, 1
mrc p15, 0, r0, c1, c0 @ get control register
orr r0, r0, #0x00001000 @ I-cache
orr r0, r0, #0x00000005 @ MPU/D-cache
mov pc, lr
.size __arm940_setup, . - __arm940_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm940_processor_functions, #object
ENTRY(arm940_processor_functions)
.word nommu_early_abort
.word legacy_pabort
.word cpu_arm940_proc_init
.word cpu_arm940_proc_fin
.word cpu_arm940_reset
.word cpu_arm940_do_idle
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4t"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm940_name, #object
cpu_arm940_name:
.ascii "ARM940T"
.size cpu_arm940_name, . - cpu_arm940_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm940_proc_info,#object
__arm940_proc_info:
.long 0x41009400
.long 0xff00fff0
.long 0
b __arm940_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
.long cpu_arm940_name
.long arm940_processor_functions
.long 0
.long 0
.long arm940_cache_fns
.size __arm940_proc_info, . - __arm940_proc_info