blob: 0d45ef3883e821ba63aa29d2e189948a129cfc30 [file] [log] [blame]
/*
* drivers/mtd/nand/fsmc_nand.c
*
* ST Microelectronics
* Flexible Static Memory Controller (FSMC)
* Driver for NAND portions
*
* Copyright © 2010 ST Microelectronics
* Vipin Kumar <vipin.kumar@st.com>
* Ashish Priyadarshi
*
* Based on drivers/mtd/nand/nomadik_nand.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/resource.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/mtd/fsmc.h>
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
static struct nand_ecclayout fsmc_ecc1_layout = {
.eccbytes = 24,
.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
.oobfree = {
{.offset = 8, .length = 8},
{.offset = 24, .length = 8},
{.offset = 40, .length = 8},
{.offset = 56, .length = 8},
{.offset = 72, .length = 8},
{.offset = 88, .length = 8},
{.offset = 104, .length = 8},
{.offset = 120, .length = 8}
}
};
static struct nand_ecclayout fsmc_ecc4_lp_layout = {
.eccbytes = 104,
.eccpos = { 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14,
18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30,
34, 35, 36, 37, 38, 39, 40,
41, 42, 43, 44, 45, 46,
50, 51, 52, 53, 54, 55, 56,
57, 58, 59, 60, 61, 62,
66, 67, 68, 69, 70, 71, 72,
73, 74, 75, 76, 77, 78,
82, 83, 84, 85, 86, 87, 88,
89, 90, 91, 92, 93, 94,
98, 99, 100, 101, 102, 103, 104,
105, 106, 107, 108, 109, 110,
114, 115, 116, 117, 118, 119, 120,
121, 122, 123, 124, 125, 126
},
.oobfree = {
{.offset = 15, .length = 3},
{.offset = 31, .length = 3},
{.offset = 47, .length = 3},
{.offset = 63, .length = 3},
{.offset = 79, .length = 3},
{.offset = 95, .length = 3},
{.offset = 111, .length = 3},
{.offset = 127, .length = 1}
}
};
/*
* ECC placement definitions in oobfree type format.
* There are 13 bytes of ecc for every 512 byte block and it has to be read
* consecutively and immediately after the 512 byte data block for hardware to
* generate the error bit offsets in 512 byte data.
* Managing the ecc bytes in the following way makes it easier for software to
* read ecc bytes consecutive to data bytes. This way is similar to
* oobfree structure maintained already in generic nand driver
*/
static struct fsmc_eccplace fsmc_ecc4_lp_place = {
.eccplace = {
{.offset = 2, .length = 13},
{.offset = 18, .length = 13},
{.offset = 34, .length = 13},
{.offset = 50, .length = 13},
{.offset = 66, .length = 13},
{.offset = 82, .length = 13},
{.offset = 98, .length = 13},
{.offset = 114, .length = 13}
}
};
static struct nand_ecclayout fsmc_ecc4_sp_layout = {
.eccbytes = 13,
.eccpos = { 0, 1, 2, 3, 6, 7, 8,
9, 10, 11, 12, 13, 14
},
.oobfree = {
{.offset = 15, .length = 1},
}
};
static struct fsmc_eccplace fsmc_ecc4_sp_place = {
.eccplace = {
{.offset = 0, .length = 4},
{.offset = 6, .length = 9}
}
};
#ifdef CONFIG_MTD_PARTITIONS
/*
* Default partition tables to be used if the partition information not
* provided through platform data.
*
* Default partition layout for small page(= 512 bytes) devices
* Size for "Root file system" is updated in driver based on actual device size
*/
static struct mtd_partition partition_info_16KB_blk[] = {
{
.name = "X-loader",
.offset = 0,
.size = 4*0x4000,
},
{
.name = "U-Boot",
.offset = 0x10000,
.size = 20*0x4000,
},
{
.name = "Kernel",
.offset = 0x60000,
.size = 256*0x4000,
},
{
.name = "Root File System",
.offset = 0x460000,
.size = 0,
},
};
/*
* Default partition layout for large page(> 512 bytes) devices
* Size for "Root file system" is updated in driver based on actual device size
*/
static struct mtd_partition partition_info_128KB_blk[] = {
{
.name = "X-loader",
.offset = 0,
.size = 4*0x20000,
},
{
.name = "U-Boot",
.offset = 0x80000,
.size = 12*0x20000,
},
{
.name = "Kernel",
.offset = 0x200000,
.size = 48*0x20000,
},
{
.name = "Root File System",
.offset = 0x800000,
.size = 0,
},
};
#ifdef CONFIG_MTD_CMDLINE_PARTS
const char *part_probes[] = { "cmdlinepart", NULL };
#endif
#endif
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
* @partitions: Partition info for a NAND Flash.
* @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
* @clk: Clock structure for FSMC.
*
* @data_va: NAND port for Data.
* @cmd_va: NAND port for Command.
* @addr_va: NAND port for Address.
* @regs_va: FSMC regs base address.
*/
struct fsmc_nand_data {
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
struct mtd_partition *partitions;
unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
struct clk *clk;
struct resource *resregs;
struct resource *rescmd;
struct resource *resaddr;
struct resource *resdata;
void __iomem *data_va;
void __iomem *cmd_va;
void __iomem *addr_va;
void __iomem *regs_va;
void (*select_chip)(uint32_t bank, uint32_t busw);
};
/* Assert CS signal based on chipnr */
static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
{
struct nand_chip *chip = mtd->priv;
struct fsmc_nand_data *host;
host = container_of(mtd, struct fsmc_nand_data, mtd);
switch (chipnr) {
case -1:
chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
break;
case 0:
case 1:
case 2:
case 3:
if (host->select_chip)
host->select_chip(chipnr,
chip->options & NAND_BUSWIDTH_16);
break;
default:
BUG();
}
}
/*
* fsmc_cmd_ctrl - For facilitaing Hardware access
* This routine allows hardware specific access to control-lines(ALE,CLE)
*/
static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_regs *regs = host->regs_va;
unsigned int bank = host->bank;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE) {
this->IO_ADDR_R = (void __iomem *)host->cmd_va;
this->IO_ADDR_W = (void __iomem *)host->cmd_va;
} else if (ctrl & NAND_ALE) {
this->IO_ADDR_R = (void __iomem *)host->addr_va;
this->IO_ADDR_W = (void __iomem *)host->addr_va;
} else {
this->IO_ADDR_R = (void __iomem *)host->data_va;
this->IO_ADDR_W = (void __iomem *)host->data_va;
}
if (ctrl & NAND_NCE) {
writel(readl(&regs->bank_regs[bank].pc) | FSMC_ENABLE,
&regs->bank_regs[bank].pc);
} else {
writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ENABLE,
&regs->bank_regs[bank].pc);
}
}
mb();
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
/*
* fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
*
* This routine initializes timing parameters related to NAND memory access in
* FSMC registers
*/
static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank,
uint32_t busw)
{
uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
if (busw)
writel(value | FSMC_DEVWID_16, &regs->bank_regs[bank].pc);
else
writel(value | FSMC_DEVWID_8, &regs->bank_regs[bank].pc);
writel(readl(&regs->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1,
&regs->bank_regs[bank].pc);
writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
&regs->bank_regs[bank].comm);
writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
&regs->bank_regs[bank].attrib);
}
/*
* fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
*/
static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_regs *regs = host->regs_va;
uint32_t bank = host->bank;
writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256,
&regs->bank_regs[bank].pc);
writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCEN,
&regs->bank_regs[bank].pc);
writel(readl(&regs->bank_regs[bank].pc) | FSMC_ECCEN,
&regs->bank_regs[bank].pc);
}
/*
* fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
* FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
* max of 8-bits)
*/
static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_regs *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
do {
if (readl(&regs->bank_regs[bank].sts) & FSMC_CODE_RDY)
break;
else
cond_resched();
} while (!time_after_eq(jiffies, deadline));
ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
ecc[3] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl(&regs->bank_regs[bank].ecc2);
ecc[4] = (uint8_t) (ecc_tmp >> 0);
ecc[5] = (uint8_t) (ecc_tmp >> 8);
ecc[6] = (uint8_t) (ecc_tmp >> 16);
ecc[7] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl(&regs->bank_regs[bank].ecc3);
ecc[8] = (uint8_t) (ecc_tmp >> 0);
ecc[9] = (uint8_t) (ecc_tmp >> 8);
ecc[10] = (uint8_t) (ecc_tmp >> 16);
ecc[11] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl(&regs->bank_regs[bank].sts);
ecc[12] = (uint8_t) (ecc_tmp >> 16);
return 0;
}
/*
* fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
* FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_regs *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
return 0;
}
/*
* fsmc_read_page_hwecc
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
* @page: page number to read
*
* This routine is needed for fsmc version 8 as reading from NAND chip has to be
* performed in a strict sequence as follows:
* data(512 byte) -> ecc(13 byte)
* After this read, fsmc hardware generates and reports error data bits(up to a
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_eccplace *ecc_place = host->ecc_place;
int i, j, s, stat, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
int off, len, group = 0;
/*
* ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
* end up reading 14 bytes (7 words) from oob. The local array is
* to maintain word alignment
*/
uint16_t ecc_oob[7];
uint8_t *oob = (uint8_t *)&ecc_oob[0];
for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
for (j = 0; j < eccbytes;) {
off = ecc_place->eccplace[group].offset;
len = ecc_place->eccplace[group].length;
group++;
/*
* length is intentionally kept a higher multiple of 2
* to read at least 13 bytes even in case of 16 bit NAND
* devices
*/
len = roundup(len, 2);
chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
chip->read_buf(mtd, oob + j, len);
j += len;
}
memcpy(&ecc_code[i], oob, 13);
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
}
return 0;
}
/*
* fsmc_correct_data
* @mtd: mtd info structure
* @dat: buffer of read data
* @read_ecc: ecc read from device spare area
* @calc_ecc: ecc calculated from read data
*
* calc_ecc is a 104 bit information containing maximum of 8 error
* offset informations of 13 bits each in 512 bytes of read data.
*/
static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
struct fsmc_regs *regs = host->regs_va;
unsigned int bank = host->bank;
uint16_t err_idx[8];
uint64_t ecc_data[2];
uint32_t num_err, i;
/* The calculated ecc is actually the correction index in data */
memcpy(ecc_data, calc_ecc, 13);
/*
* ------------------- calc_ecc[] bit wise -----------|--13 bits--|
* |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
*
* calc_ecc is a 104 bit information containing maximum of 8 error
* offset informations of 13 bits each. calc_ecc is copied into a
* uint64_t array and error offset indexes are populated in err_idx
* array
*/
for (i = 0; i < 8; i++) {
if (i == 4) {
err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0];
ecc_data[1] >>= 1;
continue;
}
err_idx[i] = (ecc_data[i/4] & 0x1FFF);
ecc_data[i/4] >>= 13;
}
num_err = (readl(&regs->bank_regs[bank].sts) >> 10) & 0xF;
if (num_err == 0xF)
return -EBADMSG;
i = 0;
while (num_err--) {
change_bit(0, (unsigned long *)&err_idx[i]);
change_bit(1, (unsigned long *)&err_idx[i]);
if (err_idx[i] <= 512 * 8) {
change_bit(err_idx[i], (unsigned long *)dat);
i++;
}
}
return i;
}
/*
* fsmc_nand_probe - Probe function
* @pdev: platform device structure
*/
static int __init fsmc_nand_probe(struct platform_device *pdev)
{
struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct fsmc_nand_data *host;
struct mtd_info *mtd;
struct nand_chip *nand;
struct fsmc_regs *regs;
struct resource *res;
int ret = 0;
u32 pid;
int i;
if (!pdata) {
dev_err(&pdev->dev, "platform data is NULL\n");
return -EINVAL;
}
/* Allocate memory for the device structure (and zero it) */
host = kzalloc(sizeof(*host), GFP_KERNEL);
if (!host) {
dev_err(&pdev->dev, "failed to allocate device structure\n");
return -ENOMEM;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
if (!res) {
ret = -EIO;
goto err_probe1;
}
host->resdata = request_mem_region(res->start, resource_size(res),
pdev->name);
if (!host->resdata) {
ret = -EIO;
goto err_probe1;
}
host->data_va = ioremap(res->start, resource_size(res));
if (!host->data_va) {
ret = -EIO;
goto err_probe1;
}
host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE,
resource_size(res), pdev->name);
if (!host->resaddr) {
ret = -EIO;
goto err_probe1;
}
host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res));
if (!host->addr_va) {
ret = -EIO;
goto err_probe1;
}
host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE,
resource_size(res), pdev->name);
if (!host->rescmd) {
ret = -EIO;
goto err_probe1;
}
host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res));
if (!host->cmd_va) {
ret = -EIO;
goto err_probe1;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
if (!res) {
ret = -EIO;
goto err_probe1;
}
host->resregs = request_mem_region(res->start, resource_size(res),
pdev->name);
if (!host->resregs) {
ret = -EIO;
goto err_probe1;
}
host->regs_va = ioremap(res->start, resource_size(res));
if (!host->regs_va) {
ret = -EIO;
goto err_probe1;
}
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "failed to fetch block clock\n");
ret = PTR_ERR(host->clk);
host->clk = NULL;
goto err_probe1;
}
ret = clk_enable(host->clk);
if (ret)
goto err_probe1;
/*
* This device ID is actually a common AMBA ID as used on the
* AMBA PrimeCell bus. However it is not a PrimeCell.
*/
for (pid = 0, i = 0; i < 4; i++)
pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
host->pid = pid;
dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
"revision %02x, config %02x\n",
AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
host->bank = pdata->bank;
host->select_chip = pdata->select_bank;
regs = host->regs_va;
/* Link all private pointers */
mtd = &host->mtd;
nand = &host->nand;
mtd->priv = nand;
nand->priv = host;
host->mtd.owner = THIS_MODULE;
nand->IO_ADDR_R = host->data_va;
nand->IO_ADDR_W = host->data_va;
nand->cmd_ctrl = fsmc_cmd_ctrl;
nand->chip_delay = 30;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->options = pdata->options;
nand->select_chip = fsmc_select_chip;
if (pdata->width == FSMC_NAND_BW16)
nand->options |= NAND_BUSWIDTH_16;
fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
nand->ecc.calculate = fsmc_read_hwecc_ecc4;
nand->ecc.correct = fsmc_correct_data;
nand->ecc.bytes = 13;
} else {
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
nand->ecc.bytes = 3;
}
/*
* Scan to find existence of the device
*/
if (nand_scan_ident(&host->mtd, 1, NULL)) {
ret = -ENXIO;
dev_err(&pdev->dev, "No NAND Device found!\n");
goto err_probe;
}
if (AMBA_REV_BITS(host->pid) >= 8) {
if (host->mtd.writesize == 512) {
nand->ecc.layout = &fsmc_ecc4_sp_layout;
host->ecc_place = &fsmc_ecc4_sp_place;
} else {
nand->ecc.layout = &fsmc_ecc4_lp_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
}
} else {
nand->ecc.layout = &fsmc_ecc1_layout;
}
/* Second stage of scan to fill MTD data-structures */
if (nand_scan_tail(&host->mtd)) {
ret = -ENXIO;
goto err_probe;
}
/*
* The partition information can is accessed by (in the same precedence)
*
* command line through Bootloader,
* platform data,
* default partition information present in driver.
*/
#ifdef CONFIG_MTD_PARTITIONS
#ifdef CONFIG_MTD_CMDLINE_PARTS
/*
* Check if partition info passed via command line
*/
host->mtd.name = "nand";
host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
&host->partitions, 0);
if (host->nr_partitions <= 0) {
#endif
/*
* Check if partition info passed via command line
*/
if (pdata->partitions) {
host->partitions = pdata->partitions;
host->nr_partitions = pdata->nr_partitions;
} else {
struct mtd_partition *partition;
int i;
/* Select the default partitions info */
switch (host->mtd.size) {
case 0x01000000:
case 0x02000000:
case 0x04000000:
host->partitions = partition_info_16KB_blk;
host->nr_partitions =
sizeof(partition_info_16KB_blk) /
sizeof(struct mtd_partition);
break;
case 0x08000000:
case 0x10000000:
case 0x20000000:
case 0x40000000:
host->partitions = partition_info_128KB_blk;
host->nr_partitions =
sizeof(partition_info_128KB_blk) /
sizeof(struct mtd_partition);
break;
default:
ret = -ENXIO;
pr_err("Unsupported NAND size\n");
goto err_probe;
}
partition = host->partitions;
for (i = 0; i < host->nr_partitions; i++, partition++) {
if (partition->size == 0) {
partition->size = host->mtd.size -
partition->offset;
break;
}
}
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
}
#endif
if (host->partitions) {
ret = add_mtd_partitions(&host->mtd, host->partitions,
host->nr_partitions);
if (ret)
goto err_probe;
}
#else
dev_info(&pdev->dev, "Registering %s as whole device\n", mtd->name);
if (!add_mtd_device(mtd)) {
ret = -ENXIO;
goto err_probe;
}
#endif
platform_set_drvdata(pdev, host);
dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
return 0;
err_probe:
clk_disable(host->clk);
err_probe1:
if (host->clk)
clk_put(host->clk);
if (host->regs_va)
iounmap(host->regs_va);
if (host->resregs)
release_mem_region(host->resregs->start,
resource_size(host->resregs));
if (host->cmd_va)
iounmap(host->cmd_va);
if (host->rescmd)
release_mem_region(host->rescmd->start,
resource_size(host->rescmd));
if (host->addr_va)
iounmap(host->addr_va);
if (host->resaddr)
release_mem_region(host->resaddr->start,
resource_size(host->resaddr));
if (host->data_va)
iounmap(host->data_va);
if (host->resdata)
release_mem_region(host->resdata->start,
resource_size(host->resdata));
kfree(host);
return ret;
}
/*
* Clean up routine
*/
static int fsmc_nand_remove(struct platform_device *pdev)
{
struct fsmc_nand_data *host = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
if (host) {
#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(&host->mtd);
#else
del_mtd_device(&host->mtd);
#endif
clk_disable(host->clk);
clk_put(host->clk);
iounmap(host->regs_va);
release_mem_region(host->resregs->start,
resource_size(host->resregs));
iounmap(host->cmd_va);
release_mem_region(host->rescmd->start,
resource_size(host->rescmd));
iounmap(host->addr_va);
release_mem_region(host->resaddr->start,
resource_size(host->resaddr));
iounmap(host->data_va);
release_mem_region(host->resdata->start,
resource_size(host->resdata));
kfree(host);
}
return 0;
}
#ifdef CONFIG_PM
static int fsmc_nand_suspend(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host)
clk_disable(host->clk);
return 0;
}
static int fsmc_nand_resume(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host)
clk_enable(host->clk);
return 0;
}
static const struct dev_pm_ops fsmc_nand_pm_ops = {
.suspend = fsmc_nand_suspend,
.resume = fsmc_nand_resume,
};
#endif
static struct platform_driver fsmc_nand_driver = {
.remove = fsmc_nand_remove,
.driver = {
.owner = THIS_MODULE,
.name = "fsmc-nand",
#ifdef CONFIG_PM
.pm = &fsmc_nand_pm_ops,
#endif
},
};
static int __init fsmc_nand_init(void)
{
return platform_driver_probe(&fsmc_nand_driver,
fsmc_nand_probe);
}
module_init(fsmc_nand_init);
static void __exit fsmc_nand_exit(void)
{
platform_driver_unregister(&fsmc_nand_driver);
}
module_exit(fsmc_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");