blob: ec337c2bd5e0b5294efa467691ef1807742aa1bc [file] [log] [blame]
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
*
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
*
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "ohci.h"
#include "pci-quirks.h"
#define DRIVER_DESC "OHCI PCI platform driver"
static const char hcd_name[] = "ohci-pci";
/*-------------------------------------------------------------------------*/
static int broken_suspend(struct usb_hcd *hcd)
{
device_init_wakeup(&hcd->self.root_hub->dev, 0);
return 0;
}
/* AMD 756, for most chips (early revs), corrupts register
* values on read ... so enable the vendor workaround.
*/
static int ohci_quirk_amd756(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags = OHCI_QUIRK_AMD756;
ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
/* also erratum 10 (suspend/resume issues) */
return broken_suspend(hcd);
}
/* Apple's OHCI driver has a lot of bizarre workarounds
* for this chip. Evidently control and bulk lists
* can get confused. (B&W G3 models, and ...)
*/
static int ohci_quirk_opti(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
return 0;
}
/* Check for NSC87560. We have to look at the bridge (fn1) to
* identify the USB (fn2). This quirk might apply to more or
* even all NSC stuff.
*/
static int ohci_quirk_ns(struct usb_hcd *hcd)
{
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
struct pci_dev *b;
b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
&& b->vendor == PCI_VENDOR_ID_NS) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags |= OHCI_QUIRK_SUPERIO;
ohci_dbg (ohci, "Using NSC SuperIO setup\n");
}
pci_dev_put(b);
return 0;
}
/* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags |= OHCI_QUIRK_ZFMICRO;
ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
return 0;
}
/* Check for Toshiba SCC OHCI which has big endian registers
* and little endian in memory data structures
*/
static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
/* That chip is only present in the southbridge of some
* cell based platforms which are supposed to select
* CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
* that was the case though.
*/
#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
ohci->flags |= OHCI_QUIRK_BE_MMIO;
ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
return 0;
#else
ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
return -ENXIO;
#endif
}
/* Check for NEC chip and apply quirk for allegedly lost interrupts.
*/
static void ohci_quirk_nec_worker(struct work_struct *work)
{
struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
int status;
status = ohci_restart(ohci);
if (status != 0)
ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
"ohci_restart", status);
}
static int ohci_quirk_nec(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->flags |= OHCI_QUIRK_NEC;
INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
return 0;
}
static int ohci_quirk_amd700(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct pci_dev *amd_smbus_dev;
u8 rev;
if (usb_amd_find_chipset_info())
ohci->flags |= OHCI_QUIRK_AMD_PLL;
amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
if (!amd_smbus_dev)
return 0;
rev = amd_smbus_dev->revision;
/* SB800 needs pre-fetch fix */
if ((rev >= 0x40) && (rev <= 0x4f)) {
ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
}
pci_dev_put(amd_smbus_dev);
amd_smbus_dev = NULL;
return 0;
}
/* List of quirks for OHCI */
static const struct pci_device_id ohci_pci_quirks[] = {
{
PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
.driver_data = (unsigned long)ohci_quirk_amd756,
},
{
PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
.driver_data = (unsigned long)ohci_quirk_opti,
},
{
PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
.driver_data = (unsigned long)ohci_quirk_ns,
},
{
PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
.driver_data = (unsigned long)ohci_quirk_zfmicro,
},
{
PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
.driver_data = (unsigned long)ohci_quirk_toshiba_scc,
},
{
PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
.driver_data = (unsigned long)ohci_quirk_nec,
},
{
/* Toshiba portege 4000 */
.vendor = PCI_VENDOR_ID_AL,
.device = 0x5237,
.subvendor = PCI_VENDOR_ID_TOSHIBA,
.subdevice = 0x0004,
.driver_data = (unsigned long) broken_suspend,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
.driver_data = (unsigned long) broken_suspend,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
.driver_data = (unsigned long)ohci_quirk_amd700,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
.driver_data = (unsigned long)ohci_quirk_amd700,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
.driver_data = (unsigned long)ohci_quirk_amd700,
},
/* FIXME for some of the early AMD 760 southbridges, OHCI
* won't work at all. blacklist them.
*/
{},
};
static int ohci_pci_reset (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int ret = 0;
if (hcd->self.controller) {
const struct pci_device_id *quirk_id;
quirk_id = pci_match_id(ohci_pci_quirks, pdev);
if (quirk_id != NULL) {
int (*quirk)(struct usb_hcd *ohci);
quirk = (void *)quirk_id->driver_data;
ret = quirk(hcd);
}
}
if (ret == 0)
ret = ohci_setup(hcd);
/*
* After ohci setup RWC may not be set for add-in PCI cards.
* This transfers PCI PM wakeup capabilities.
*/
if (device_can_wakeup(&pdev->dev))
ohci->hc_control |= OHCI_CTRL_RWC;
return ret;
}
static struct hc_driver __read_mostly ohci_pci_hc_driver;
static const struct ohci_driver_overrides pci_overrides __initconst = {
.product_desc = "OHCI PCI host controller",
.reset = ohci_pci_reset,
};
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, {
/* The device in the ConneXT I/O hub has no class reg */
PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver ohci_pci_driver = {
.name = (char *) hcd_name,
.id_table = pci_ids,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
.shutdown = usb_hcd_pci_shutdown,
#ifdef CONFIG_PM
.driver = {
.pm = &usb_hcd_pci_pm_ops
},
#endif
};
static int __init ohci_pci_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
#ifdef CONFIG_PM
/* Entries for the PCI suspend/resume callbacks are special */
ohci_pci_hc_driver.pci_suspend = ohci_suspend;
ohci_pci_hc_driver.pci_resume = ohci_resume;
#endif
return pci_register_driver(&ohci_pci_driver);
}
module_init(ohci_pci_init);
static void __exit ohci_pci_cleanup(void)
{
pci_unregister_driver(&ohci_pci_driver);
}
module_exit(ohci_pci_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");