blob: 5ca738ab44e000911dec36cecdc1f6818ec6a7c2 [file] [log] [blame]
/*
* DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
*
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
*
* Thanks to Afatech who kindly provided information.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include "af9015.h"
static int dvb_usb_af9015_remote;
module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
MODULE_PARM_DESC(remote, "select remote");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
{
#define REQ_HDR_LEN 8 /* send header size */
#define ACK_HDR_LEN 2 /* rece header size */
struct af9015_state *state = d_to_priv(d);
int ret, wlen, rlen;
u8 write = 1;
mutex_lock(&d->usb_mutex);
state->buf[0] = req->cmd;
state->buf[1] = state->seq++;
state->buf[2] = req->i2c_addr;
state->buf[3] = req->addr >> 8;
state->buf[4] = req->addr & 0xff;
state->buf[5] = req->mbox;
state->buf[6] = req->addr_len;
state->buf[7] = req->data_len;
switch (req->cmd) {
case GET_CONFIG:
case READ_MEMORY:
case RECONNECT_USB:
write = 0;
break;
case READ_I2C:
write = 0;
state->buf[2] |= 0x01; /* set I2C direction */
case WRITE_I2C:
state->buf[0] = READ_WRITE_I2C;
break;
case WRITE_MEMORY:
if (((req->addr & 0xff00) == 0xff00) ||
((req->addr & 0xff00) == 0xae00))
state->buf[0] = WRITE_VIRTUAL_MEMORY;
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
case BOOT:
break;
default:
dev_err(&d->udev->dev, "%s: unknown command=%d\n",
KBUILD_MODNAME, req->cmd);
ret = -EIO;
goto error;
}
/* buffer overflow check */
if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
dev_err(&d->udev->dev, "%s: too much data; cmd=%d len=%d\n",
KBUILD_MODNAME, req->cmd, req->data_len);
ret = -EINVAL;
goto error;
}
/* write receives seq + status = 2 bytes
read receives seq + status + data = 2 + N bytes */
wlen = REQ_HDR_LEN;
rlen = ACK_HDR_LEN;
if (write) {
wlen += req->data_len;
memcpy(&state->buf[REQ_HDR_LEN], req->data, req->data_len);
} else {
rlen += req->data_len;
}
/* no ack for these packets */
if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
rlen = 0;
ret = dvb_usbv2_generic_rw_locked(d,
state->buf, wlen, state->buf, rlen);
if (ret)
goto error;
/* check status */
if (rlen && state->buf[1]) {
dev_err(&d->udev->dev, "%s: command failed=%d\n",
KBUILD_MODNAME, state->buf[1]);
ret = -EIO;
goto error;
}
/* read request, copy returned data to return buf */
if (!write)
memcpy(req->data, &state->buf[ACK_HDR_LEN], req->data_len);
error:
mutex_unlock(&d->usb_mutex);
return ret;
}
static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val,
u8 len)
{
struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
val};
return af9015_ctrl_msg(d, &req);
}
static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
{
struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
val};
return af9015_ctrl_msg(d, &req);
}
static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
{
return af9015_write_regs(d, addr, &val, 1);
}
static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
{
return af9015_read_regs(d, addr, val, 1);
}
static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 val)
{
struct af9015_state *state = d_to_priv(d);
struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
if (addr == state->af9013_config[0].i2c_addr ||
addr == state->af9013_config[1].i2c_addr)
req.addr_len = 3;
return af9015_ctrl_msg(d, &req);
}
static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 *val)
{
struct af9015_state *state = d_to_priv(d);
struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
if (addr == state->af9013_config[0].i2c_addr ||
addr == state->af9013_config[1].i2c_addr)
req.addr_len = 3;
return af9015_ctrl_msg(d, &req);
}
static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
{
int ret;
u8 val, mask = 0x01;
ret = af9015_read_reg(d, addr, &val);
if (ret)
return ret;
mask <<= bit;
if (op) {
/* set bit */
val |= mask;
} else {
/* clear bit */
mask ^= 0xff;
val &= mask;
}
return af9015_write_reg(d, addr, val);
}
static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
{
return af9015_do_reg_bit(d, addr, bit, 1);
}
static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
{
return af9015_do_reg_bit(d, addr, bit, 0);
}
static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct af9015_state *state = d_to_priv(d);
int ret = 0, i = 0;
u16 addr;
u8 uninitialized_var(mbox), addr_len;
struct req_t req;
/*
The bus lock is needed because there is two tuners both using same I2C-address.
Due to that the only way to select correct tuner is use demodulator I2C-gate.
................................................
. AF9015 includes integrated AF9013 demodulator.
. ____________ ____________ . ____________
.| uC | | demod | . | tuner |
.|------------| |------------| . |------------|
.| AF9015 | | AF9013/5 | . | MXL5003 |
.| |--+----I2C-------|-----/ -----|-.-----I2C-------| |
.| | | | addr 0x38 | . | addr 0xc6 |
.|____________| | |____________| . |____________|
.................|..............................
| ____________ ____________
| | demod | | tuner |
| |------------| |------------|
| | AF9013 | | MXL5003 |
+----I2C-------|-----/ -----|-------I2C-------| |
| addr 0x3a | | addr 0xc6 |
|____________| |____________|
*/
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (msg[i].addr == state->af9013_config[0].i2c_addr ||
msg[i].addr == state->af9013_config[1].i2c_addr) {
addr = msg[i].buf[0] << 8;
addr += msg[i].buf[1];
mbox = msg[i].buf[2];
addr_len = 3;
} else {
addr = msg[i].buf[0];
addr_len = 1;
/* mbox is don't care in that case */
}
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].len > 3 || msg[i+1].len > 61) {
ret = -EOPNOTSUPP;
goto error;
}
if (msg[i].addr == state->af9013_config[0].i2c_addr)
req.cmd = READ_MEMORY;
else
req.cmd = READ_I2C;
req.i2c_addr = msg[i].addr;
req.addr = addr;
req.mbox = mbox;
req.addr_len = addr_len;
req.data_len = msg[i+1].len;
req.data = &msg[i+1].buf[0];
ret = af9015_ctrl_msg(d, &req);
i += 2;
} else if (msg[i].flags & I2C_M_RD) {
if (msg[i].len > 61) {
ret = -EOPNOTSUPP;
goto error;
}
if (msg[i].addr == state->af9013_config[0].i2c_addr) {
ret = -EINVAL;
goto error;
}
req.cmd = READ_I2C;
req.i2c_addr = msg[i].addr;
req.addr = addr;
req.mbox = mbox;
req.addr_len = addr_len;
req.data_len = msg[i].len;
req.data = &msg[i].buf[0];
ret = af9015_ctrl_msg(d, &req);
i += 1;
} else {
if (msg[i].len > 21) {
ret = -EOPNOTSUPP;
goto error;
}
if (msg[i].addr == state->af9013_config[0].i2c_addr)
req.cmd = WRITE_MEMORY;
else
req.cmd = WRITE_I2C;
req.i2c_addr = msg[i].addr;
req.addr = addr;
req.mbox = mbox;
req.addr_len = addr_len;
req.data_len = msg[i].len-addr_len;
req.data = &msg[i].buf[addr_len];
ret = af9015_ctrl_msg(d, &req);
i += 1;
}
if (ret)
goto error;
}
ret = i;
error:
mutex_unlock(&d->i2c_mutex);
return ret;
}
static u32 af9015_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm af9015_i2c_algo = {
.master_xfer = af9015_i2c_xfer,
.functionality = af9015_i2c_func,
};
static int af9015_identify_state(struct dvb_usb_device *d, const char **name)
{
int ret;
u8 reply;
struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
ret = af9015_ctrl_msg(d, &req);
if (ret)
return ret;
dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
if (reply == 0x02)
ret = WARM;
else
ret = COLD;
return ret;
}
static int af9015_download_firmware(struct dvb_usb_device *d,
const struct firmware *fw)
{
struct af9015_state *state = d_to_priv(d);
int i, len, remaining, ret;
struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
u16 checksum = 0;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* calc checksum */
for (i = 0; i < fw->size; i++)
checksum += fw->data[i];
state->firmware_size = fw->size;
state->firmware_checksum = checksum;
#define FW_ADDR 0x5100 /* firmware start address */
#define LEN_MAX 55 /* max packet size */
for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
len = remaining;
if (len > LEN_MAX)
len = LEN_MAX;
req.data_len = len;
req.data = (u8 *) &fw->data[fw->size - remaining];
req.addr = FW_ADDR + fw->size - remaining;
ret = af9015_ctrl_msg(d, &req);
if (ret) {
dev_err(&d->udev->dev,
"%s: firmware download failed=%d\n",
KBUILD_MODNAME, ret);
goto error;
}
}
/* firmware loaded, request boot */
req.cmd = BOOT;
req.data_len = 0;
ret = af9015_ctrl_msg(d, &req);
if (ret) {
dev_err(&d->udev->dev, "%s: firmware boot failed=%d\n",
KBUILD_MODNAME, ret);
goto error;
}
error:
return ret;
}
#define AF9015_EEPROM_SIZE 256
/* hash (and dump) eeprom */
static int af9015_eeprom_hash(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret, i;
u8 buf[AF9015_EEPROM_SIZE];
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL};
/* read eeprom */
for (i = 0; i < AF9015_EEPROM_SIZE; i++) {
req.addr = i;
req.data = &buf[i];
ret = af9015_ctrl_msg(d, &req);
if (ret < 0)
goto err;
}
/* calculate checksum */
for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) {
state->eeprom_sum *= GOLDEN_RATIO_PRIME_32;
state->eeprom_sum += le32_to_cpu(((u32 *)buf)[i]);
}
for (i = 0; i < AF9015_EEPROM_SIZE; i += 16)
dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 16, buf + i);
dev_dbg(&d->udev->dev, "%s: eeprom sum=%.8x\n",
__func__, state->eeprom_sum);
return 0;
err:
dev_err(&d->udev->dev, "%s: eeprom failed=%d\n", KBUILD_MODNAME, ret);
return ret;
}
static int af9015_read_config(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
/* first message will timeout often due to possible hw bug */
for (i = 0; i < 4; i++) {
ret = af9015_ctrl_msg(d, &req);
if (!ret)
break;
}
if (ret)
goto error;
ret = af9015_eeprom_hash(d);
if (ret)
goto error;
state->ir_mode = val;
dev_dbg(&d->udev->dev, "%s: IR mode=%d\n", __func__, val);
/* TS mode - one or two receivers */
req.addr = AF9015_EEPROM_TS_MODE;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->dual_mode = val;
dev_dbg(&d->udev->dev, "%s: TS mode=%d\n", __func__, state->dual_mode);
/* disable 2nd adapter because we don't have PID-filters */
if (d->udev->speed == USB_SPEED_FULL)
state->dual_mode = 0;
if (state->dual_mode) {
/* read 2nd demodulator I2C address */
req.addr = AF9015_EEPROM_DEMOD2_I2C;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->af9013_config[1].i2c_addr = val;
}
for (i = 0; i < state->dual_mode + 1; i++) {
if (i == 1)
offset = AF9015_EEPROM_OFFSET;
/* xtal */
req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
switch (val) {
case 0:
state->af9013_config[i].clock = 28800000;
break;
case 1:
state->af9013_config[i].clock = 20480000;
break;
case 2:
state->af9013_config[i].clock = 28000000;
break;
case 3:
state->af9013_config[i].clock = 25000000;
break;
}
dev_dbg(&d->udev->dev, "%s: [%d] xtal=%d set clock=%d\n",
__func__, i, val,
state->af9013_config[i].clock);
/* IF frequency */
req.addr = AF9015_EEPROM_IF1H + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->af9013_config[i].if_frequency = val << 8;
req.addr = AF9015_EEPROM_IF1L + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->af9013_config[i].if_frequency += val;
state->af9013_config[i].if_frequency *= 1000;
dev_dbg(&d->udev->dev, "%s: [%d] IF frequency=%d\n", __func__,
i, state->af9013_config[i].if_frequency);
/* MT2060 IF1 */
req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->mt2060_if1[i] = val << 8;
req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
state->mt2060_if1[i] += val;
dev_dbg(&d->udev->dev, "%s: [%d] MT2060 IF1=%d\n", __func__, i,
state->mt2060_if1[i]);
/* tuner */
req.addr = AF9015_EEPROM_TUNER_ID1 + offset;
ret = af9015_ctrl_msg(d, &req);
if (ret)
goto error;
switch (val) {
case AF9013_TUNER_ENV77H11D5:
case AF9013_TUNER_MT2060:
case AF9013_TUNER_QT1010:
case AF9013_TUNER_UNKNOWN:
case AF9013_TUNER_MT2060_2:
case AF9013_TUNER_TDA18271:
case AF9013_TUNER_QT1010A:
case AF9013_TUNER_TDA18218:
state->af9013_config[i].spec_inv = 1;
break;
case AF9013_TUNER_MXL5003D:
case AF9013_TUNER_MXL5005D:
case AF9013_TUNER_MXL5005R:
case AF9013_TUNER_MXL5007T:
state->af9013_config[i].spec_inv = 0;
break;
case AF9013_TUNER_MC44S803:
state->af9013_config[i].gpio[1] = AF9013_GPIO_LO;
state->af9013_config[i].spec_inv = 1;
break;
default:
dev_err(&d->udev->dev, "%s: tuner id=%d not " \
"supported, please report!\n",
KBUILD_MODNAME, val);
return -ENODEV;
}
state->af9013_config[i].tuner = val;
dev_dbg(&d->udev->dev, "%s: [%d] tuner id=%d\n",
__func__, i, val);
}
error:
if (ret)
dev_err(&d->udev->dev, "%s: eeprom read failed=%d\n",
KBUILD_MODNAME, ret);
/* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
content :-( Override some wrong values here. Ditto for the
AVerTV Red HD+ (A850T) device. */
if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
((le16_to_cpu(d->udev->descriptor.idProduct) ==
USB_PID_AVERMEDIA_A850) ||
(le16_to_cpu(d->udev->descriptor.idProduct) ==
USB_PID_AVERMEDIA_A850T))) {
dev_dbg(&d->udev->dev,
"%s: AverMedia A850: overriding config\n",
__func__);
/* disable dual mode */
state->dual_mode = 0;
/* set correct IF */
state->af9013_config[0].if_frequency = 4570000;
}
return ret;
}
static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
struct usb_data_stream_properties *stream)
{
struct dvb_usb_device *d = fe_to_d(fe);
dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id);
if (d->udev->speed == USB_SPEED_FULL)
stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE;
return 0;
}
static int af9015_get_adapter_count(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
return state->dual_mode + 1;
}
/* override demod callbacks for resource locking */
static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->set_frontend[fe_to_adap(fe)->id](fe);
mutex_unlock(&state->fe_mutex);
return ret;
}
/* override demod callbacks for resource locking */
static int af9015_af9013_read_status(struct dvb_frontend *fe,
fe_status_t *status)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->read_status[fe_to_adap(fe)->id](fe, status);
mutex_unlock(&state->fe_mutex);
return ret;
}
/* override demod callbacks for resource locking */
static int af9015_af9013_init(struct dvb_frontend *fe)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->init[fe_to_adap(fe)->id](fe);
mutex_unlock(&state->fe_mutex);
return ret;
}
/* override demod callbacks for resource locking */
static int af9015_af9013_sleep(struct dvb_frontend *fe)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->sleep[fe_to_adap(fe)->id](fe);
mutex_unlock(&state->fe_mutex);
return ret;
}
/* override tuner callbacks for resource locking */
static int af9015_tuner_init(struct dvb_frontend *fe)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->tuner_init[fe_to_adap(fe)->id](fe);
mutex_unlock(&state->fe_mutex);
return ret;
}
/* override tuner callbacks for resource locking */
static int af9015_tuner_sleep(struct dvb_frontend *fe)
{
int ret;
struct af9015_state *state = fe_to_priv(fe);
if (mutex_lock_interruptible(&state->fe_mutex))
return -EAGAIN;
ret = state->tuner_sleep[fe_to_adap(fe)->id](fe);
mutex_unlock(&state->fe_mutex);
return ret;
}
static int af9015_copy_firmware(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
u8 fw_params[4];
u8 val, i;
struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params),
fw_params };
dev_dbg(&d->udev->dev, "%s:\n", __func__);
fw_params[0] = state->firmware_size >> 8;
fw_params[1] = state->firmware_size & 0xff;
fw_params[2] = state->firmware_checksum >> 8;
fw_params[3] = state->firmware_checksum & 0xff;
/* wait 2nd demodulator ready */
msleep(100);
ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
0x98be, &val);
if (ret)
goto error;
else
dev_dbg(&d->udev->dev, "%s: firmware status=%02x\n",
__func__, val);
if (val == 0x0c) /* fw is running, no need for download */
goto exit;
/* set I2C master clock to fast (to speed up firmware copy) */
ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */
if (ret)
goto error;
msleep(50);
/* copy firmware */
ret = af9015_ctrl_msg(d, &req);
if (ret)
dev_err(&d->udev->dev, "%s: firmware copy cmd failed=%d\n",
KBUILD_MODNAME, ret);
dev_dbg(&d->udev->dev, "%s: firmware copy done\n", __func__);
/* set I2C master clock back to normal */
ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */
if (ret)
goto error;
/* request boot firmware */
ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr,
0xe205, 1);
dev_dbg(&d->udev->dev, "%s: firmware boot cmd status=%d\n",
__func__, ret);
if (ret)
goto error;
for (i = 0; i < 15; i++) {
msleep(100);
/* check firmware status */
ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
0x98be, &val);
dev_dbg(&d->udev->dev, "%s: firmware status cmd status=%d " \
"firmware status=%02x\n", __func__, ret, val);
if (ret)
goto error;
if (val == 0x0c || val == 0x04) /* success or fail */
break;
}
if (val == 0x04) {
dev_err(&d->udev->dev, "%s: firmware did not run\n",
KBUILD_MODNAME);
ret = -ETIMEDOUT;
} else if (val != 0x0c) {
dev_err(&d->udev->dev, "%s: firmware boot timeout\n",
KBUILD_MODNAME);
ret = -ETIMEDOUT;
}
error:
exit:
return ret;
}
static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct af9015_state *state = adap_to_priv(adap);
if (adap->id == 0) {
state->af9013_config[0].ts_mode = AF9013_TS_USB;
memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4);
state->af9013_config[0].gpio[0] = AF9013_GPIO_HI;
state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON;
} else if (adap->id == 1) {
state->af9013_config[1].ts_mode = AF9013_TS_SERIAL;
memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4);
state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON;
state->af9013_config[1].gpio[1] = AF9013_GPIO_LO;
/* copy firmware to 2nd demodulator */
if (state->dual_mode) {
ret = af9015_copy_firmware(adap_to_d(adap));
if (ret) {
dev_err(&adap_to_d(adap)->udev->dev,
"%s: firmware copy to 2nd " \
"frontend failed, will " \
"disable it\n", KBUILD_MODNAME);
state->dual_mode = 0;
return -ENODEV;
}
} else {
return -ENODEV;
}
}
/* attach demodulator */
adap->fe[0] = dvb_attach(af9013_attach,
&state->af9013_config[adap->id], &adap_to_d(adap)->i2c_adap);
/*
* AF9015 firmware does not like if it gets interrupted by I2C adapter
* request on some critical phases. During normal operation I2C adapter
* is used only 2nd demodulator and tuner on dual tuner devices.
* Override demodulator callbacks and use mutex for limit access to
* those "critical" paths to keep AF9015 happy.
*/
if (adap->fe[0]) {
state->set_frontend[adap->id] =
adap->fe[0]->ops.set_frontend;
adap->fe[0]->ops.set_frontend =
af9015_af9013_set_frontend;
state->read_status[adap->id] =
adap->fe[0]->ops.read_status;
adap->fe[0]->ops.read_status =
af9015_af9013_read_status;
state->init[adap->id] = adap->fe[0]->ops.init;
adap->fe[0]->ops.init = af9015_af9013_init;
state->sleep[adap->id] = adap->fe[0]->ops.sleep;
adap->fe[0]->ops.sleep = af9015_af9013_sleep;
}
return adap->fe[0] == NULL ? -ENODEV : 0;
}
static struct mt2060_config af9015_mt2060_config = {
.i2c_address = 0xc0,
.clock_out = 0,
};
static struct qt1010_config af9015_qt1010_config = {
.i2c_address = 0xc4,
};
static struct tda18271_config af9015_tda18271_config = {
.gate = TDA18271_GATE_DIGITAL,
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
};
static struct mxl5005s_config af9015_mxl5003_config = {
.i2c_address = 0xc6,
.if_freq = IF_FREQ_4570000HZ,
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_DEFAULT,
.rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
.AgcMasterByte = 0x00,
};
static struct mxl5005s_config af9015_mxl5005_config = {
.i2c_address = 0xc6,
.if_freq = IF_FREQ_4570000HZ,
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_OFF,
.rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
.AgcMasterByte = 0x00,
};
static struct mc44s803_config af9015_mc44s803_config = {
.i2c_address = 0xc0,
.dig_out = 1,
};
static struct tda18218_config af9015_tda18218_config = {
.i2c_address = 0xc0,
.i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
};
static struct mxl5007t_config af9015_mxl5007t_config = {
.xtal_freq_hz = MxL_XTAL_24_MHZ,
.if_freq_hz = MxL_IF_4_57_MHZ,
};
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
struct af9015_state *state = d_to_priv(d);
int ret;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
switch (state->af9013_config[adap->id].tuner) {
case AF9013_TUNER_MT2060:
case AF9013_TUNER_MT2060_2:
ret = dvb_attach(mt2060_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap, &af9015_mt2060_config,
state->mt2060_if1[adap->id])
== NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_QT1010:
case AF9013_TUNER_QT1010A:
ret = dvb_attach(qt1010_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
&af9015_qt1010_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18271:
ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0,
&adap_to_d(adap)->i2c_adap,
&af9015_tda18271_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18218:
ret = dvb_attach(tda18218_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
&af9015_tda18218_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5003D:
ret = dvb_attach(mxl5005s_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5005D:
case AF9013_TUNER_MXL5005R:
ret = dvb_attach(mxl5005s_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_ENV77H11D5:
ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0,
&adap_to_d(adap)->i2c_adap,
DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MC44S803:
ret = dvb_attach(mc44s803_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5007T:
ret = dvb_attach(mxl5007t_attach, adap->fe[0],
&adap_to_d(adap)->i2c_adap,
0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_UNKNOWN:
default:
dev_err(&d->udev->dev, "%s: unknown tuner id=%d\n",
KBUILD_MODNAME,
state->af9013_config[adap->id].tuner);
ret = -ENODEV;
}
if (adap->fe[0]->ops.tuner_ops.init) {
state->tuner_init[adap->id] =
adap->fe[0]->ops.tuner_ops.init;
adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init;
}
if (adap->fe[0]->ops.tuner_ops.sleep) {
state->tuner_sleep[adap->id] =
adap->fe[0]->ops.tuner_ops.sleep;
adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep;
}
return ret;
}
static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
struct dvb_usb_device *d = adap_to_d(adap);
int ret;
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff)
ret = af9015_set_reg_bit(d, 0xd503, 0);
else
ret = af9015_clear_reg_bit(d, 0xd503, 0);
return ret;
}
static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
int onoff)
{
struct dvb_usb_device *d = adap_to_d(adap);
int ret;
u8 idx;
dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n",
__func__, index, pid, onoff);
ret = af9015_write_reg(d, 0xd505, (pid & 0xff));
if (ret)
goto error;
ret = af9015_write_reg(d, 0xd506, (pid >> 8));
if (ret)
goto error;
idx = ((index & 0x1f) | (1 << 5));
ret = af9015_write_reg(d, 0xd504, idx);
error:
return ret;
}
static int af9015_init_endpoint(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
u16 frame_size;
u8 packet_size;
dev_dbg(&d->udev->dev, "%s: USB speed=%d\n", __func__, d->udev->speed);
if (d->udev->speed == USB_SPEED_FULL) {
frame_size = TS_USB11_FRAME_SIZE/4;
packet_size = TS_USB11_MAX_PACKET_SIZE/4;
} else {
frame_size = TS_USB20_FRAME_SIZE/4;
packet_size = TS_USB20_MAX_PACKET_SIZE/4;
}
ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
if (ret)
goto error;
ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
if (ret)
goto error;
ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
if (ret)
goto error;
}
ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
if (ret)
goto error;
}
/* EP4 xfer length */
ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
if (ret)
goto error;
/* EP5 xfer length */
ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
if (ret)
goto error;
}
/* enable / disable mp2if2 */
if (state->dual_mode)
ret = af9015_set_reg_bit(d, 0xd50b, 0);
else
ret = af9015_clear_reg_bit(d, 0xd50b, 0);
error:
if (ret)
dev_err(&d->udev->dev, "%s: endpoint init failed=%d\n",
KBUILD_MODNAME, ret);
return ret;
}
static int af9015_init(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
mutex_init(&state->fe_mutex);
/* init RC canary */
ret = af9015_write_reg(d, 0x98e9, 0xff);
if (ret)
goto error;
ret = af9015_init_endpoint(d);
if (ret)
goto error;
error:
return ret;
}
#if IS_ENABLED(CONFIG_RC_CORE)
struct af9015_rc_setup {
unsigned int id;
char *rc_codes;
};
static char *af9015_rc_setup_match(unsigned int id,
const struct af9015_rc_setup *table)
{
for (; table->rc_codes; table++)
if (table->id == id)
return table->rc_codes;
return NULL;
}
static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
{ AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
{ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
{ AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
{ AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
{ AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
{ }
};
static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
{ }
};
static int af9015_rc_query(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
u8 buf[17];
/* read registers needed to detect remote controller code */
ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
if (ret)
goto error;
/* If any of these are non-zero, assume invalid data */
if (buf[1] || buf[2] || buf[3]) {
dev_dbg(&d->udev->dev, "%s: invalid data\n", __func__);
return ret;
}
/* Check for repeat of previous code */
if ((state->rc_repeat != buf[6] || buf[0]) &&
!memcmp(&buf[12], state->rc_last, 4)) {
dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__);
rc_repeat(d->rc_dev);
state->rc_repeat = buf[6];
return ret;
}
/* Only process key if canary killed */
if (buf[16] != 0xff && buf[0] != 0x01) {
dev_dbg(&d->udev->dev, "%s: key pressed %*ph\n",
__func__, 4, buf + 12);
/* Reset the canary */
ret = af9015_write_reg(d, 0x98e9, 0xff);
if (ret)
goto error;
/* Remember this key */
memcpy(state->rc_last, &buf[12], 4);
if (buf[14] == (u8) ~buf[15]) {
if (buf[12] == (u8) ~buf[13]) {
/* NEC */
state->rc_keycode = RC_SCANCODE_NEC(buf[12],
buf[14]);
} else {
/* NEC extended*/
state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
buf[13],
buf[14]);
}
} else {
/* 32 bit NEC */
state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
buf[13] << 16 |
buf[14] << 8 |
buf[15]);
}
rc_keydown(d->rc_dev, RC_TYPE_NEC, state->rc_keycode, 0);
} else {
dev_dbg(&d->udev->dev, "%s: no key press\n", __func__);
/* Invalidate last keypress */
/* Not really needed, but helps with debug */
state->rc_last[2] = state->rc_last[3];
}
state->rc_repeat = buf[6];
state->rc_failed = false;
error:
if (ret) {
dev_warn(&d->udev->dev, "%s: rc query failed=%d\n",
KBUILD_MODNAME, ret);
/* allow random errors as dvb-usb will stop polling on error */
if (!state->rc_failed)
ret = 0;
state->rc_failed = true;
}
return ret;
}
static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
{
struct af9015_state *state = d_to_priv(d);
u16 vid = le16_to_cpu(d->udev->descriptor.idVendor);
if (state->ir_mode == AF9015_IR_MODE_DISABLED)
return 0;
/* try to load remote based module param */
if (!rc->map_name)
rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote,
af9015_rc_setup_modparam);
/* try to load remote based eeprom hash */
if (!rc->map_name)
rc->map_name = af9015_rc_setup_match(state->eeprom_sum,
af9015_rc_setup_hashes);
/* try to load remote based USB iManufacturer string */
if (!rc->map_name && vid == USB_VID_AFATECH) {
/* Check USB manufacturer and product strings and try
to determine correct remote in case of chip vendor
reference IDs are used.
DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */
char manufacturer[10];
memset(manufacturer, 0, sizeof(manufacturer));
usb_string(d->udev, d->udev->descriptor.iManufacturer,
manufacturer, sizeof(manufacturer));
if (!strcmp("MSI", manufacturer)) {
/* iManufacturer 1 MSI
iProduct 2 MSI K-VOX */
rc->map_name = af9015_rc_setup_match(
AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
af9015_rc_setup_modparam);
}
}
/* load empty to enable rc */
if (!rc->map_name)
rc->map_name = RC_MAP_EMPTY;
rc->allowed_protos = RC_BIT_NEC;
rc->query = af9015_rc_query;
rc->interval = 500;
return 0;
}
#else
#define af9015_get_rc_config NULL
#endif
static int af9015_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
char manufacturer[sizeof("ITE Technologies, Inc.")];
memset(manufacturer, 0, sizeof(manufacturer));
usb_string(udev, udev->descriptor.iManufacturer,
manufacturer, sizeof(manufacturer));
/*
* There is two devices having same ID but different chipset. One uses
* AF9015 and the other IT9135 chipset. Only difference seen on lsusb
* is iManufacturer string.
*
* idVendor 0x0ccd TerraTec Electronic GmbH
* idProduct 0x0099
* bcdDevice 2.00
* iManufacturer 1 Afatech
* iProduct 2 DVB-T 2
*
* idVendor 0x0ccd TerraTec Electronic GmbH
* idProduct 0x0099
* bcdDevice 2.00
* iManufacturer 1 ITE Technologies, Inc.
* iProduct 2 DVB-T TV Stick
*/
if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
(le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
if (!strcmp("ITE Technologies, Inc.", manufacturer)) {
dev_dbg(&udev->dev, "%s: rejecting device\n", __func__);
return -ENODEV;
}
}
return dvb_usbv2_probe(intf, id);
}
/* interface 0 is used by DVB-T receiver and
interface 1 is for remote controller (HID) */
static struct dvb_usb_device_properties af9015_props = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
.size_of_priv = sizeof(struct af9015_state),
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
.identify_state = af9015_identify_state,
.firmware = AF9015_FIRMWARE,
.download_firmware = af9015_download_firmware,
.i2c_algo = &af9015_i2c_algo,
.read_config = af9015_read_config,
.frontend_attach = af9015_af9013_frontend_attach,
.tuner_attach = af9015_tuner_attach,
.init = af9015_init,
.get_rc_config = af9015_get_rc_config,
.get_stream_config = af9015_get_stream_config,
.get_adapter_count = af9015_get_adapter_count,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = af9015_pid_filter,
.pid_filter_ctrl = af9015_pid_filter_ctrl,
.stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE),
}, {
.stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE),
},
},
};
static const struct usb_device_id af9015_id_table[] = {
{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015,
&af9015_props, "Afatech AF9015 reference design", NULL) },
{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016,
&af9015_props, "Afatech AF9015 reference design", NULL) },
{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD,
&af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) },
{ DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E,
&af9015_props, "Pinnacle PCTV 71e", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U,
&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN,
&af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) },
{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700,
&af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) },
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2,
&af9015_props, "TerraTec Cinergy T USB XE", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T,
&af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X,
&af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) },
{ DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380,
&af9015_props, "Xtensions XD-380", NULL) },
{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO,
&af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2,
&af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) },
{ DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2,
&af9015_props, "Telestar Starstick 2", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309,
&af9015_props, "AVerMedia A309", NULL) },
{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III,
&af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U,
&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2,
&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3,
&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT,
&af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850,
&af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805,
&af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
&af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
&af9015_props, "KWorld Digial MC-810", NULL) },
{ DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
&af9015_props, "Genius TVGo DVB-T03", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,
&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T,
&af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20,
&af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2,
&af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) },
{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS,
&af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T,
&af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4,
&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M,
&af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) },
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC,
&af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) },
/* XXX: that same ID [0ccd:0099] is used by af9035 driver too */
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
&af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T,
&af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) },
{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3,
&af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) },
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22,
&af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9015_id_table);
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver af9015_usb_driver = {
.name = KBUILD_MODNAME,
.id_table = af9015_id_table,
.probe = af9015_probe,
.disconnect = dvb_usbv2_disconnect,
.suspend = dvb_usbv2_suspend,
.resume = dvb_usbv2_resume,
.reset_resume = dvb_usbv2_reset_resume,
.no_dynamic_id = 1,
.soft_unbind = 1,
};
module_usb_driver(af9015_usb_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Afatech AF9015 driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(AF9015_FIRMWARE);