blob: 1a00ad241edd3dcd10ac83e22d03a50c079920c6 [file] [log] [blame]
/* linux/drivers/video/s3c-fb.c
*
* Copyright 2008 Openmoko Inc.
* Copyright 2008-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung SoC Framebuffer driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software FoundatIon.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <video/samsung_fimd.h>
#include <mach/map.h>
#include <plat/fb.h>
/* This driver will export a number of framebuffer interfaces depending
* on the configuration passed in via the platform data. Each fb instance
* maps to a hardware window. Currently there is no support for runtime
* setting of the alpha-blending functions that each window has, so only
* window 0 is actually useful.
*
* Window 0 is treated specially, it is used for the basis of the LCD
* output timings and as the control for the output power-down state.
*/
/* note, the previous use of <mach/regs-fb.h> to get platform specific data
* has been replaced by using the platform device name to pick the correct
* configuration data for the system.
*/
#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
#undef writel
#define writel(v, r) do { \
pr_debug("%s: %08x => %p\n", __func__, (unsigned int)v, r); \
__raw_writel(v, r); \
} while (0)
#endif /* FB_S3C_DEBUG_REGWRITE */
/* irq_flags bits */
#define S3C_FB_VSYNC_IRQ_EN 0
#define VSYNC_TIMEOUT_MSEC 50
struct s3c_fb;
#define VALID_BPP(x) (1 << ((x) - 1))
#define OSD_BASE(win, variant) ((variant).osd + ((win) * (variant).osd_stride))
#define VIDOSD_A(win, variant) (OSD_BASE(win, variant) + 0x00)
#define VIDOSD_B(win, variant) (OSD_BASE(win, variant) + 0x04)
#define VIDOSD_C(win, variant) (OSD_BASE(win, variant) + 0x08)
#define VIDOSD_D(win, variant) (OSD_BASE(win, variant) + 0x0C)
/**
* struct s3c_fb_variant - fb variant information
* @is_2443: Set if S3C2443/S3C2416 style hardware.
* @nr_windows: The number of windows.
* @vidtcon: The base for the VIDTCONx registers
* @wincon: The base for the WINxCON registers.
* @winmap: The base for the WINxMAP registers.
* @keycon: The abse for the WxKEYCON registers.
* @buf_start: Offset of buffer start registers.
* @buf_size: Offset of buffer size registers.
* @buf_end: Offset of buffer end registers.
* @osd: The base for the OSD registers.
* @palette: Address of palette memory, or 0 if none.
* @has_prtcon: Set if has PRTCON register.
* @has_shadowcon: Set if has SHADOWCON register.
* @has_blendcon: Set if has BLENDCON register.
* @has_clksel: Set if VIDCON0 register has CLKSEL bit.
* @has_fixvclk: Set if VIDCON1 register has FIXVCLK bits.
*/
struct s3c_fb_variant {
unsigned int is_2443:1;
unsigned short nr_windows;
unsigned int vidtcon;
unsigned short wincon;
unsigned short winmap;
unsigned short keycon;
unsigned short buf_start;
unsigned short buf_end;
unsigned short buf_size;
unsigned short osd;
unsigned short osd_stride;
unsigned short palette[S3C_FB_MAX_WIN];
unsigned int has_prtcon:1;
unsigned int has_shadowcon:1;
unsigned int has_blendcon:1;
unsigned int has_clksel:1;
unsigned int has_fixvclk:1;
};
/**
* struct s3c_fb_win_variant
* @has_osd_c: Set if has OSD C register.
* @has_osd_d: Set if has OSD D register.
* @has_osd_alpha: Set if can change alpha transparency for a window.
* @palette_sz: Size of palette in entries.
* @palette_16bpp: Set if palette is 16bits wide.
* @osd_size_off: If != 0, supports setting up OSD for a window; the appropriate
* register is located at the given offset from OSD_BASE.
* @valid_bpp: 1 bit per BPP setting to show valid bits-per-pixel.
*
* valid_bpp bit x is set if (x+1)BPP is supported.
*/
struct s3c_fb_win_variant {
unsigned int has_osd_c:1;
unsigned int has_osd_d:1;
unsigned int has_osd_alpha:1;
unsigned int palette_16bpp:1;
unsigned short osd_size_off;
unsigned short palette_sz;
u32 valid_bpp;
};
/**
* struct s3c_fb_driverdata - per-device type driver data for init time.
* @variant: The variant information for this driver.
* @win: The window information for each window.
*/
struct s3c_fb_driverdata {
struct s3c_fb_variant variant;
struct s3c_fb_win_variant *win[S3C_FB_MAX_WIN];
};
/**
* struct s3c_fb_palette - palette information
* @r: Red bitfield.
* @g: Green bitfield.
* @b: Blue bitfield.
* @a: Alpha bitfield.
*/
struct s3c_fb_palette {
struct fb_bitfield r;
struct fb_bitfield g;
struct fb_bitfield b;
struct fb_bitfield a;
};
/**
* struct s3c_fb_win - per window private data for each framebuffer.
* @windata: The platform data supplied for the window configuration.
* @parent: The hardware that this window is part of.
* @fbinfo: Pointer pack to the framebuffer info for this window.
* @varint: The variant information for this window.
* @palette_buffer: Buffer/cache to hold palette entries.
* @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/
* @index: The window number of this window.
* @palette: The bitfields for changing r/g/b into a hardware palette entry.
*/
struct s3c_fb_win {
struct s3c_fb_pd_win *windata;
struct s3c_fb *parent;
struct fb_info *fbinfo;
struct s3c_fb_palette palette;
struct s3c_fb_win_variant variant;
u32 *palette_buffer;
u32 pseudo_palette[16];
unsigned int index;
};
/**
* struct s3c_fb_vsync - vsync information
* @wait: a queue for processes waiting for vsync
* @count: vsync interrupt count
*/
struct s3c_fb_vsync {
wait_queue_head_t wait;
unsigned int count;
};
/**
* struct s3c_fb - overall hardware state of the hardware
* @slock: The spinlock protection for this data structure.
* @dev: The device that we bound to, for printing, etc.
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
* @lcd_clk: The clk (sclk) feeding pixclk.
* @regs: The mapped hardware registers.
* @variant: Variant information for this hardware.
* @enabled: A bitmask of enabled hardware windows.
* @output_on: Flag if the physical output is enabled.
* @pdata: The platform configuration data passed with the device.
* @windows: The hardware windows that have been claimed.
* @irq_no: IRQ line number
* @irq_flags: irq flags
* @vsync_info: VSYNC-related information (count, queues...)
*/
struct s3c_fb {
spinlock_t slock;
struct device *dev;
struct clk *bus_clk;
struct clk *lcd_clk;
void __iomem *regs;
struct s3c_fb_variant variant;
unsigned char enabled;
bool output_on;
struct s3c_fb_platdata *pdata;
struct s3c_fb_win *windows[S3C_FB_MAX_WIN];
int irq_no;
unsigned long irq_flags;
struct s3c_fb_vsync vsync_info;
};
/**
* s3c_fb_validate_win_bpp - validate the bits-per-pixel for this mode.
* @win: The device window.
* @bpp: The bit depth.
*/
static bool s3c_fb_validate_win_bpp(struct s3c_fb_win *win, unsigned int bpp)
{
return win->variant.valid_bpp & VALID_BPP(bpp);
}
/**
* s3c_fb_check_var() - framebuffer layer request to verify a given mode.
* @var: The screen information to verify.
* @info: The framebuffer device.
*
* Framebuffer layer call to verify the given information and allow us to
* update various information depending on the hardware capabilities.
*/
static int s3c_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
dev_dbg(sfb->dev, "checking parameters\n");
var->xres_virtual = max(var->xres_virtual, var->xres);
var->yres_virtual = max(var->yres_virtual, var->yres);
if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
win->index, var->bits_per_pixel);
return -EINVAL;
}
/* always ensure these are zero, for drop through cases below */
var->transp.offset = 0;
var->transp.length = 0;
switch (var->bits_per_pixel) {
case 1:
case 2:
case 4:
case 8:
if (sfb->variant.palette[win->index] != 0) {
/* non palletised, A:1,R:2,G:3,B:2 mode */
var->red.offset = 5;
var->green.offset = 2;
var->blue.offset = 0;
var->red.length = 2;
var->green.length = 3;
var->blue.length = 2;
var->transp.offset = 7;
var->transp.length = 1;
} else {
var->red.offset = 0;
var->red.length = var->bits_per_pixel;
var->green = var->red;
var->blue = var->red;
}
break;
case 19:
/* 666 with one bit alpha/transparency */
var->transp.offset = 18;
var->transp.length = 1;
/* drop through */
case 18:
var->bits_per_pixel = 32;
/* 666 format */
var->red.offset = 12;
var->green.offset = 6;
var->blue.offset = 0;
var->red.length = 6;
var->green.length = 6;
var->blue.length = 6;
break;
case 16:
/* 16 bpp, 565 format */
var->red.offset = 11;
var->green.offset = 5;
var->blue.offset = 0;
var->red.length = 5;
var->green.length = 6;
var->blue.length = 5;
break;
case 32:
case 28:
case 25:
var->transp.length = var->bits_per_pixel - 24;
var->transp.offset = 24;
/* drop through */
case 24:
/* our 24bpp is unpacked, so 32bpp */
var->bits_per_pixel = 32;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
default:
dev_err(sfb->dev, "invalid bpp\n");
return -EINVAL;
}
dev_dbg(sfb->dev, "%s: verified parameters\n", __func__);
return 0;
}
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
{
unsigned long clk;
unsigned long long tmp;
unsigned int result;
if (sfb->variant.has_clksel)
clk = clk_get_rate(sfb->bus_clk);
else
clk = clk_get_rate(sfb->lcd_clk);
tmp = (unsigned long long)clk;
tmp *= pixclk;
do_div(tmp, 1000000000UL);
result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, result ? clk / result : clk);
return result;
}
/**
* s3c_fb_align_word() - align pixel count to word boundary
* @bpp: The number of bits per pixel
* @pix: The value to be aligned.
*
* Align the given pixel count so that it will start on an 32bit word
* boundary.
*/
static int s3c_fb_align_word(unsigned int bpp, unsigned int pix)
{
int pix_per_word;
if (bpp > 16)
return pix;
pix_per_word = (8 * 32) / bpp;
return ALIGN(pix, pix_per_word);
}
/**
* vidosd_set_size() - set OSD size for a window
*
* @win: the window to set OSD size for
* @size: OSD size register value
*/
static void vidosd_set_size(struct s3c_fb_win *win, u32 size)
{
struct s3c_fb *sfb = win->parent;
/* OSD can be set up if osd_size_off != 0 for this window */
if (win->variant.osd_size_off)
writel(size, sfb->regs + OSD_BASE(win->index, sfb->variant)
+ win->variant.osd_size_off);
}
/**
* vidosd_set_alpha() - set alpha transparency for a window
*
* @win: the window to set OSD size for
* @alpha: alpha register value
*/
static void vidosd_set_alpha(struct s3c_fb_win *win, u32 alpha)
{
struct s3c_fb *sfb = win->parent;
if (win->variant.has_osd_alpha)
writel(alpha, sfb->regs + VIDOSD_C(win->index, sfb->variant));
}
/**
* shadow_protect_win() - disable updating values from shadow registers at vsync
*
* @win: window to protect registers for
* @protect: 1 to protect (disable updates)
*/
static void shadow_protect_win(struct s3c_fb_win *win, bool protect)
{
struct s3c_fb *sfb = win->parent;
u32 reg;
if (protect) {
if (sfb->variant.has_prtcon) {
writel(PRTCON_PROTECT, sfb->regs + PRTCON);
} else if (sfb->variant.has_shadowcon) {
reg = readl(sfb->regs + SHADOWCON);
writel(reg | SHADOWCON_WINx_PROTECT(win->index),
sfb->regs + SHADOWCON);
}
} else {
if (sfb->variant.has_prtcon) {
writel(0, sfb->regs + PRTCON);
} else if (sfb->variant.has_shadowcon) {
reg = readl(sfb->regs + SHADOWCON);
writel(reg & ~SHADOWCON_WINx_PROTECT(win->index),
sfb->regs + SHADOWCON);
}
}
}
/**
* s3c_fb_enable() - Set the state of the main LCD output
* @sfb: The main framebuffer state.
* @enable: The state to set.
*/
static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
{
u32 vidcon0 = readl(sfb->regs + VIDCON0);
if (enable && !sfb->output_on)
pm_runtime_get_sync(sfb->dev);
if (enable) {
vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
} else {
/* see the note in the framebuffer datasheet about
* why you cannot take both of these bits down at the
* same time. */
if (vidcon0 & VIDCON0_ENVID) {
vidcon0 |= VIDCON0_ENVID;
vidcon0 &= ~VIDCON0_ENVID_F;
}
}
writel(vidcon0, sfb->regs + VIDCON0);
if (!enable && sfb->output_on)
pm_runtime_put_sync(sfb->dev);
sfb->output_on = enable;
}
/**
* s3c_fb_set_par() - framebuffer request to set new framebuffer state.
* @info: The framebuffer to change.
*
* Framebuffer layer request to set a new mode for the specified framebuffer
*/
static int s3c_fb_set_par(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
void __iomem *regs = sfb->regs;
void __iomem *buf = regs;
int win_no = win->index;
u32 alpha = 0;
u32 data;
u32 pagewidth;
dev_dbg(sfb->dev, "setting framebuffer parameters\n");
pm_runtime_get_sync(sfb->dev);
shadow_protect_win(win, 1);
switch (var->bits_per_pixel) {
case 32:
case 24:
case 16:
case 12:
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 8:
if (win->variant.palette_sz >= 256)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
else
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 1:
info->fix.visual = FB_VISUAL_MONO01;
break;
default:
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
}
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
info->fix.xpanstep = info->var.xres_virtual > info->var.xres ? 1 : 0;
info->fix.ypanstep = info->var.yres_virtual > info->var.yres ? 1 : 0;
/* disable the window whilst we update it */
writel(0, regs + WINCON(win_no));
if (!sfb->output_on)
s3c_fb_enable(sfb, 1);
/* write the buffer address */
/* start and end registers stride is 8 */
buf = regs + win_no * 8;
writel(info->fix.smem_start, buf + sfb->variant.buf_start);
data = info->fix.smem_start + info->fix.line_length * var->yres;
writel(data, buf + sfb->variant.buf_end);
pagewidth = (var->xres * var->bits_per_pixel) >> 3;
data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
VIDW_BUF_SIZE_PAGEWIDTH(pagewidth) |
VIDW_BUF_SIZE_OFFSET_E(info->fix.line_length - pagewidth) |
VIDW_BUF_SIZE_PAGEWIDTH_E(pagewidth);
writel(data, regs + sfb->variant.buf_size + (win_no * 4));
/* write 'OSD' registers to control position of framebuffer */
data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0) |
VIDOSDxA_TOPLEFT_X_E(0) | VIDOSDxA_TOPLEFT_Y_E(0);
writel(data, regs + VIDOSD_A(win_no, sfb->variant));
data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
var->xres - 1)) |
VIDOSDxB_BOTRIGHT_Y(var->yres - 1) |
VIDOSDxB_BOTRIGHT_X_E(s3c_fb_align_word(var->bits_per_pixel,
var->xres - 1)) |
VIDOSDxB_BOTRIGHT_Y_E(var->yres - 1);
writel(data, regs + VIDOSD_B(win_no, sfb->variant));
data = var->xres * var->yres;
alpha = VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);
vidosd_set_alpha(win, alpha);
vidosd_set_size(win, data);
/* Enable DMA channel for this window */
if (sfb->variant.has_shadowcon) {
data = readl(sfb->regs + SHADOWCON);
data |= SHADOWCON_CHx_ENABLE(win_no);
writel(data, sfb->regs + SHADOWCON);
}
data = WINCONx_ENWIN;
sfb->enabled |= (1 << win->index);
/* note, since we have to round up the bits-per-pixel, we end up
* relying on the bitfield information for r/g/b/a to work out
* exactly which mode of operation is intended. */
switch (var->bits_per_pixel) {
case 1:
data |= WINCON0_BPPMODE_1BPP;
data |= WINCONx_BITSWP;
data |= WINCONx_BURSTLEN_4WORD;
break;
case 2:
data |= WINCON0_BPPMODE_2BPP;
data |= WINCONx_BITSWP;
data |= WINCONx_BURSTLEN_8WORD;
break;
case 4:
data |= WINCON0_BPPMODE_4BPP;
data |= WINCONx_BITSWP;
data |= WINCONx_BURSTLEN_8WORD;
break;
case 8:
if (var->transp.length != 0)
data |= WINCON1_BPPMODE_8BPP_1232;
else
data |= WINCON0_BPPMODE_8BPP_PALETTE;
data |= WINCONx_BURSTLEN_8WORD;
data |= WINCONx_BYTSWP;
break;
case 16:
if (var->transp.length != 0)
data |= WINCON1_BPPMODE_16BPP_A1555;
else
data |= WINCON0_BPPMODE_16BPP_565;
data |= WINCONx_HAWSWP;
data |= WINCONx_BURSTLEN_16WORD;
break;
case 24:
case 32:
if (var->red.length == 6) {
if (var->transp.length != 0)
data |= WINCON1_BPPMODE_19BPP_A1666;
else
data |= WINCON1_BPPMODE_18BPP_666;
} else if (var->transp.length == 1)
data |= WINCON1_BPPMODE_25BPP_A1888
| WINCON1_BLD_PIX;
else if ((var->transp.length == 4) ||
(var->transp.length == 8))
data |= WINCON1_BPPMODE_28BPP_A4888
| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
else
data |= WINCON0_BPPMODE_24BPP_888;
data |= WINCONx_WSWP;
data |= WINCONx_BURSTLEN_16WORD;
break;
}
/* Enable the colour keying for the window below this one */
if (win_no > 0) {
u32 keycon0_data = 0, keycon1_data = 0;
void __iomem *keycon = regs + sfb->variant.keycon;
keycon0_data = ~(WxKEYCON0_KEYBL_EN |
WxKEYCON0_KEYEN_F |
WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
keycon1_data = WxKEYCON1_COLVAL(0xffffff);
keycon += (win_no - 1) * 8;
writel(keycon0_data, keycon + WKEYCON0);
writel(keycon1_data, keycon + WKEYCON1);
}
writel(data, regs + sfb->variant.wincon + (win_no * 4));
writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
/* Set alpha value width */
if (sfb->variant.has_blendcon) {
data = readl(sfb->regs + BLENDCON);
data &= ~BLENDCON_NEW_MASK;
if (var->transp.length > 4)
data |= BLENDCON_NEW_8BIT_ALPHA_VALUE;
else
data |= BLENDCON_NEW_4BIT_ALPHA_VALUE;
writel(data, sfb->regs + BLENDCON);
}
shadow_protect_win(win, 0);
pm_runtime_put_sync(sfb->dev);
return 0;
}
/**
* s3c_fb_update_palette() - set or schedule a palette update.
* @sfb: The hardware information.
* @win: The window being updated.
* @reg: The palette index being changed.
* @value: The computed palette value.
*
* Change the value of a palette register, either by directly writing to
* the palette (this requires the palette RAM to be disconnected from the
* hardware whilst this is in progress) or schedule the update for later.
*
* At the moment, since we have no VSYNC interrupt support, we simply set
* the palette entry directly.
*/
static void s3c_fb_update_palette(struct s3c_fb *sfb,
struct s3c_fb_win *win,
unsigned int reg,
u32 value)
{
void __iomem *palreg;
u32 palcon;
palreg = sfb->regs + sfb->variant.palette[win->index];
dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n",
__func__, win->index, reg, palreg, value);
win->palette_buffer[reg] = value;
palcon = readl(sfb->regs + WPALCON);
writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON);
if (win->variant.palette_16bpp)
writew(value, palreg + (reg * 2));
else
writel(value, palreg + (reg * 4));
writel(palcon, sfb->regs + WPALCON);
}
static inline unsigned int chan_to_field(unsigned int chan,
struct fb_bitfield *bf)
{
chan &= 0xffff;
chan >>= 16 - bf->length;
return chan << bf->offset;
}
/**
* s3c_fb_setcolreg() - framebuffer layer request to change palette.
* @regno: The palette index to change.
* @red: The red field for the palette data.
* @green: The green field for the palette data.
* @blue: The blue field for the palette data.
* @trans: The transparency (alpha) field for the palette data.
* @info: The framebuffer being changed.
*/
static int s3c_fb_setcolreg(unsigned regno,
unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
unsigned int val;
dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n",
__func__, win->index, regno, red, green, blue);
pm_runtime_get_sync(sfb->dev);
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
/* true-colour, use pseudo-palette */
if (regno < 16) {
u32 *pal = info->pseudo_palette;
val = chan_to_field(red, &info->var.red);
val |= chan_to_field(green, &info->var.green);
val |= chan_to_field(blue, &info->var.blue);
pal[regno] = val;
}
break;
case FB_VISUAL_PSEUDOCOLOR:
if (regno < win->variant.palette_sz) {
val = chan_to_field(red, &win->palette.r);
val |= chan_to_field(green, &win->palette.g);
val |= chan_to_field(blue, &win->palette.b);
s3c_fb_update_palette(sfb, win, regno, val);
}
break;
default:
pm_runtime_put_sync(sfb->dev);
return 1; /* unknown type */
}
pm_runtime_put_sync(sfb->dev);
return 0;
}
/**
* s3c_fb_blank() - blank or unblank the given window
* @blank_mode: The blank state from FB_BLANK_*
* @info: The framebuffer to blank.
*
* Framebuffer layer request to change the power state.
*/
static int s3c_fb_blank(int blank_mode, struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
unsigned int index = win->index;
u32 wincon;
u32 output_on = sfb->output_on;
dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
pm_runtime_get_sync(sfb->dev);
wincon = readl(sfb->regs + sfb->variant.wincon + (index * 4));
switch (blank_mode) {
case FB_BLANK_POWERDOWN:
wincon &= ~WINCONx_ENWIN;
sfb->enabled &= ~(1 << index);
/* fall through to FB_BLANK_NORMAL */
case FB_BLANK_NORMAL:
/* disable the DMA and display 0x0 (black) */
shadow_protect_win(win, 1);
writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
sfb->regs + sfb->variant.winmap + (index * 4));
shadow_protect_win(win, 0);
break;
case FB_BLANK_UNBLANK:
shadow_protect_win(win, 1);
writel(0x0, sfb->regs + sfb->variant.winmap + (index * 4));
shadow_protect_win(win, 0);
wincon |= WINCONx_ENWIN;
sfb->enabled |= (1 << index);
break;
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
default:
pm_runtime_put_sync(sfb->dev);
return 1;
}
shadow_protect_win(win, 1);
writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4));
/* Check the enabled state to see if we need to be running the
* main LCD interface, as if there are no active windows then
* it is highly likely that we also do not need to output
* anything.
*/
s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
shadow_protect_win(win, 0);
pm_runtime_put_sync(sfb->dev);
return output_on == sfb->output_on;
}
/**
* s3c_fb_pan_display() - Pan the display.
*
* Note that the offsets can be written to the device at any time, as their
* values are latched at each vsync automatically. This also means that only
* the last call to this function will have any effect on next vsync, but
* there is no need to sleep waiting for it to prevent tearing.
*
* @var: The screen information to verify.
* @info: The framebuffer device.
*/
static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
void __iomem *buf = sfb->regs + win->index * 8;
unsigned int start_boff, end_boff;
pm_runtime_get_sync(sfb->dev);
/* Offset in bytes to the start of the displayed area */
start_boff = var->yoffset * info->fix.line_length;
/* X offset depends on the current bpp */
if (info->var.bits_per_pixel >= 8) {
start_boff += var->xoffset * (info->var.bits_per_pixel >> 3);
} else {
switch (info->var.bits_per_pixel) {
case 4:
start_boff += var->xoffset >> 1;
break;
case 2:
start_boff += var->xoffset >> 2;
break;
case 1:
start_boff += var->xoffset >> 3;
break;
default:
dev_err(sfb->dev, "invalid bpp\n");
pm_runtime_put_sync(sfb->dev);
return -EINVAL;
}
}
/* Offset in bytes to the end of the displayed area */
end_boff = start_boff + info->var.yres * info->fix.line_length;
/* Temporarily turn off per-vsync update from shadow registers until
* both start and end addresses are updated to prevent corruption */
shadow_protect_win(win, 1);
writel(info->fix.smem_start + start_boff, buf + sfb->variant.buf_start);
writel(info->fix.smem_start + end_boff, buf + sfb->variant.buf_end);
shadow_protect_win(win, 0);
pm_runtime_put_sync(sfb->dev);
return 0;
}
/**
* s3c_fb_enable_irq() - enable framebuffer interrupts
* @sfb: main hardware state
*/
static void s3c_fb_enable_irq(struct s3c_fb *sfb)
{
void __iomem *regs = sfb->regs;
u32 irq_ctrl_reg;
if (!test_and_set_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
/* IRQ disabled, enable it */
irq_ctrl_reg = readl(regs + VIDINTCON0);
irq_ctrl_reg |= VIDINTCON0_INT_ENABLE;
irq_ctrl_reg |= VIDINTCON0_INT_FRAME;
irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL0_MASK;
irq_ctrl_reg |= VIDINTCON0_FRAMESEL0_VSYNC;
irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL1_MASK;
irq_ctrl_reg |= VIDINTCON0_FRAMESEL1_NONE;
writel(irq_ctrl_reg, regs + VIDINTCON0);
}
}
/**
* s3c_fb_disable_irq() - disable framebuffer interrupts
* @sfb: main hardware state
*/
static void s3c_fb_disable_irq(struct s3c_fb *sfb)
{
void __iomem *regs = sfb->regs;
u32 irq_ctrl_reg;
if (test_and_clear_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
/* IRQ enabled, disable it */
irq_ctrl_reg = readl(regs + VIDINTCON0);
irq_ctrl_reg &= ~VIDINTCON0_INT_FRAME;
irq_ctrl_reg &= ~VIDINTCON0_INT_ENABLE;
writel(irq_ctrl_reg, regs + VIDINTCON0);
}
}
static irqreturn_t s3c_fb_irq(int irq, void *dev_id)
{
struct s3c_fb *sfb = dev_id;
void __iomem *regs = sfb->regs;
u32 irq_sts_reg;
spin_lock(&sfb->slock);
irq_sts_reg = readl(regs + VIDINTCON1);
if (irq_sts_reg & VIDINTCON1_INT_FRAME) {
/* VSYNC interrupt, accept it */
writel(VIDINTCON1_INT_FRAME, regs + VIDINTCON1);
sfb->vsync_info.count++;
wake_up_interruptible(&sfb->vsync_info.wait);
}
/* We only support waiting for VSYNC for now, so it's safe
* to always disable irqs here.
*/
s3c_fb_disable_irq(sfb);
spin_unlock(&sfb->slock);
return IRQ_HANDLED;
}
/**
* s3c_fb_wait_for_vsync() - sleep until next VSYNC interrupt or timeout
* @sfb: main hardware state
* @crtc: head index.
*/
static int s3c_fb_wait_for_vsync(struct s3c_fb *sfb, u32 crtc)
{
unsigned long count;
int ret;
if (crtc != 0)
return -ENODEV;
pm_runtime_get_sync(sfb->dev);
count = sfb->vsync_info.count;
s3c_fb_enable_irq(sfb);
ret = wait_event_interruptible_timeout(sfb->vsync_info.wait,
count != sfb->vsync_info.count,
msecs_to_jiffies(VSYNC_TIMEOUT_MSEC));
pm_runtime_put_sync(sfb->dev);
if (ret == 0)
return -ETIMEDOUT;
return 0;
}
static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
struct s3c_fb_win *win = info->par;
struct s3c_fb *sfb = win->parent;
int ret;
u32 crtc;
switch (cmd) {
case FBIO_WAITFORVSYNC:
if (get_user(crtc, (u32 __user *)arg)) {
ret = -EFAULT;
break;
}
ret = s3c_fb_wait_for_vsync(sfb, crtc);
break;
default:
ret = -ENOTTY;
}
return ret;
}
static struct fb_ops s3c_fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = s3c_fb_check_var,
.fb_set_par = s3c_fb_set_par,
.fb_blank = s3c_fb_blank,
.fb_setcolreg = s3c_fb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_pan_display = s3c_fb_pan_display,
.fb_ioctl = s3c_fb_ioctl,
};
/**
* s3c_fb_missing_pixclock() - calculates pixel clock
* @mode: The video mode to change.
*
* Calculate the pixel clock when none has been given through platform data.
*/
static void s3c_fb_missing_pixclock(struct fb_videomode *mode)
{
u64 pixclk = 1000000000000ULL;
u32 div;
div = mode->left_margin + mode->hsync_len + mode->right_margin +
mode->xres;
div *= mode->upper_margin + mode->vsync_len + mode->lower_margin +
mode->yres;
div *= mode->refresh ? : 60;
do_div(pixclk, div);
mode->pixclock = pixclk;
}
/**
* s3c_fb_alloc_memory() - allocate display memory for framebuffer window
* @sfb: The base resources for the hardware.
* @win: The window to initialise memory for.
*
* Allocate memory for the given framebuffer.
*/
static int __devinit s3c_fb_alloc_memory(struct s3c_fb *sfb,
struct s3c_fb_win *win)
{
struct s3c_fb_pd_win *windata = win->windata;
unsigned int real_size, virt_size, size;
struct fb_info *fbi = win->fbinfo;
dma_addr_t map_dma;
dev_dbg(sfb->dev, "allocating memory for display\n");
real_size = windata->xres * windata->yres;
virt_size = windata->virtual_x * windata->virtual_y;
dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n",
real_size, windata->xres, windata->yres,
virt_size, windata->virtual_x, windata->virtual_y);
size = (real_size > virt_size) ? real_size : virt_size;
size *= (windata->max_bpp > 16) ? 32 : windata->max_bpp;
size /= 8;
fbi->fix.smem_len = size;
size = PAGE_ALIGN(size);
dev_dbg(sfb->dev, "want %u bytes for window\n", size);
fbi->screen_base = dma_alloc_writecombine(sfb->dev, size,
&map_dma, GFP_KERNEL);
if (!fbi->screen_base)
return -ENOMEM;
dev_dbg(sfb->dev, "mapped %x to %p\n",
(unsigned int)map_dma, fbi->screen_base);
memset(fbi->screen_base, 0x0, size);
fbi->fix.smem_start = map_dma;
return 0;
}
/**
* s3c_fb_free_memory() - free the display memory for the given window
* @sfb: The base resources for the hardware.
* @win: The window to free the display memory for.
*
* Free the display memory allocated by s3c_fb_alloc_memory().
*/
static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
{
struct fb_info *fbi = win->fbinfo;
if (fbi->screen_base)
dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
fbi->screen_base, fbi->fix.smem_start);
}
/**
* s3c_fb_release_win() - release resources for a framebuffer window.
* @win: The window to cleanup the resources for.
*
* Release the resources that where claimed for the hardware window,
* such as the framebuffer instance and any memory claimed for it.
*/
static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
{
u32 data;
if (win->fbinfo) {
if (sfb->variant.has_shadowcon) {
data = readl(sfb->regs + SHADOWCON);
data &= ~SHADOWCON_CHx_ENABLE(win->index);
data &= ~SHADOWCON_CHx_LOCAL_ENABLE(win->index);
writel(data, sfb->regs + SHADOWCON);
}
unregister_framebuffer(win->fbinfo);
if (win->fbinfo->cmap.len)
fb_dealloc_cmap(&win->fbinfo->cmap);
s3c_fb_free_memory(sfb, win);
framebuffer_release(win->fbinfo);
}
}
/**
* s3c_fb_probe_win() - register an hardware window
* @sfb: The base resources for the hardware
* @variant: The variant information for this window.
* @res: Pointer to where to place the resultant window.
*
* Allocate and do the basic initialisation for one of the hardware's graphics
* windows.
*/
static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
struct s3c_fb_win_variant *variant,
struct s3c_fb_win **res)
{
struct fb_var_screeninfo *var;
struct fb_videomode initmode;
struct s3c_fb_pd_win *windata;
struct s3c_fb_win *win;
struct fb_info *fbinfo;
int palette_size;
int ret;
dev_dbg(sfb->dev, "probing window %d, variant %p\n", win_no, variant);
init_waitqueue_head(&sfb->vsync_info.wait);
palette_size = variant->palette_sz * 4;
fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
palette_size * sizeof(u32), sfb->dev);
if (!fbinfo) {
dev_err(sfb->dev, "failed to allocate framebuffer\n");
return -ENOENT;
}
windata = sfb->pdata->win[win_no];
initmode = *sfb->pdata->vtiming;
WARN_ON(windata->max_bpp == 0);
WARN_ON(windata->xres == 0);
WARN_ON(windata->yres == 0);
win = fbinfo->par;
*res = win;
var = &fbinfo->var;
win->variant = *variant;
win->fbinfo = fbinfo;
win->parent = sfb;
win->windata = windata;
win->index = win_no;
win->palette_buffer = (u32 *)(win + 1);
ret = s3c_fb_alloc_memory(sfb, win);
if (ret) {
dev_err(sfb->dev, "failed to allocate display memory\n");
return ret;
}
/* setup the r/b/g positions for the window's palette */
if (win->variant.palette_16bpp) {
/* Set RGB 5:6:5 as default */
win->palette.r.offset = 11;
win->palette.r.length = 5;
win->palette.g.offset = 5;
win->palette.g.length = 6;
win->palette.b.offset = 0;
win->palette.b.length = 5;
} else {
/* Set 8bpp or 8bpp and 1bit alpha */
win->palette.r.offset = 16;
win->palette.r.length = 8;
win->palette.g.offset = 8;
win->palette.g.length = 8;
win->palette.b.offset = 0;
win->palette.b.length = 8;
}
/* setup the initial video mode from the window */
initmode.xres = windata->xres;
initmode.yres = windata->yres;
fb_videomode_to_var(&fbinfo->var, &initmode);
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.accel = FB_ACCEL_NONE;
fbinfo->var.activate = FB_ACTIVATE_NOW;
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
fbinfo->var.bits_per_pixel = windata->default_bpp;
fbinfo->fbops = &s3c_fb_ops;
fbinfo->flags = FBINFO_FLAG_DEFAULT;
fbinfo->pseudo_palette = &win->pseudo_palette;
/* prepare to actually start the framebuffer */
ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
if (ret < 0) {
dev_err(sfb->dev, "check_var failed on initial video params\n");
return ret;
}
/* create initial colour map */
ret = fb_alloc_cmap(&fbinfo->cmap, win->variant.palette_sz, 1);
if (ret == 0)
fb_set_cmap(&fbinfo->cmap, fbinfo);
else
dev_err(sfb->dev, "failed to allocate fb cmap\n");
s3c_fb_set_par(fbinfo);
dev_dbg(sfb->dev, "about to register framebuffer\n");
/* run the check_var and set_par on our configuration. */
ret = register_framebuffer(fbinfo);
if (ret < 0) {
dev_err(sfb->dev, "failed to register framebuffer\n");
return ret;
}
dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
return 0;
}
/**
* s3c_fb_set_rgb_timing() - set video timing for rgb interface.
* @sfb: The base resources for the hardware.
*
* Set horizontal and vertical lcd rgb interface timing.
*/
static void s3c_fb_set_rgb_timing(struct s3c_fb *sfb)
{
struct fb_videomode *vmode = sfb->pdata->vtiming;
void __iomem *regs = sfb->regs;
int clkdiv;
u32 data;
if (!vmode->pixclock)
s3c_fb_missing_pixclock(vmode);
clkdiv = s3c_fb_calc_pixclk(sfb, vmode->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
if (clkdiv > 1)
data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
else
data &= ~VIDCON0_CLKDIR; /* 1:1 clock */
if (sfb->variant.is_2443)
data |= (1 << 5);
writel(data, regs + VIDCON0);
data = VIDTCON0_VBPD(vmode->upper_margin - 1) |
VIDTCON0_VFPD(vmode->lower_margin - 1) |
VIDTCON0_VSPW(vmode->vsync_len - 1);
writel(data, regs + sfb->variant.vidtcon);
data = VIDTCON1_HBPD(vmode->left_margin - 1) |
VIDTCON1_HFPD(vmode->right_margin - 1) |
VIDTCON1_HSPW(vmode->hsync_len - 1);
writel(data, regs + sfb->variant.vidtcon + 4);
data = VIDTCON2_LINEVAL(vmode->yres - 1) |
VIDTCON2_HOZVAL(vmode->xres - 1) |
VIDTCON2_LINEVAL_E(vmode->yres - 1) |
VIDTCON2_HOZVAL_E(vmode->xres - 1);
writel(data, regs + sfb->variant.vidtcon + 8);
}
/**
* s3c_fb_clear_win() - clear hardware window registers.
* @sfb: The base resources for the hardware.
* @win: The window to process.
*
* Reset the specific window registers to a known state.
*/
static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
{
void __iomem *regs = sfb->regs;
u32 reg;
writel(0, regs + sfb->variant.wincon + (win * 4));
writel(0, regs + VIDOSD_A(win, sfb->variant));
writel(0, regs + VIDOSD_B(win, sfb->variant));
writel(0, regs + VIDOSD_C(win, sfb->variant));
if (sfb->variant.has_shadowcon) {
reg = readl(sfb->regs + SHADOWCON);
reg &= ~(SHADOWCON_WINx_PROTECT(win) |
SHADOWCON_CHx_ENABLE(win) |
SHADOWCON_CHx_LOCAL_ENABLE(win));
writel(reg, sfb->regs + SHADOWCON);
}
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
{
const struct platform_device_id *platid;
struct s3c_fb_driverdata *fbdrv;
struct device *dev = &pdev->dev;
struct s3c_fb_platdata *pd;
struct s3c_fb *sfb;
struct resource *res;
int win;
int ret = 0;
u32 reg;
platid = platform_get_device_id(pdev);
fbdrv = (struct s3c_fb_driverdata *)platid->driver_data;
if (fbdrv->variant.nr_windows > S3C_FB_MAX_WIN) {
dev_err(dev, "too many windows, cannot attach\n");
return -EINVAL;
}
pd = pdev->dev.platform_data;
if (!pd) {
dev_err(dev, "no platform data specified\n");
return -EINVAL;
}
sfb = devm_kzalloc(dev, sizeof(struct s3c_fb), GFP_KERNEL);
if (!sfb) {
dev_err(dev, "no memory for framebuffers\n");
return -ENOMEM;
}
dev_dbg(dev, "allocate new framebuffer %p\n", sfb);
sfb->dev = dev;
sfb->pdata = pd;
sfb->variant = fbdrv->variant;
spin_lock_init(&sfb->slock);
sfb->bus_clk = devm_clk_get(dev, "lcd");
if (IS_ERR(sfb->bus_clk)) {
dev_err(dev, "failed to get bus clock\n");
return PTR_ERR(sfb->bus_clk);
}
clk_prepare_enable(sfb->bus_clk);
if (!sfb->variant.has_clksel) {
sfb->lcd_clk = devm_clk_get(dev, "sclk_fimd");
if (IS_ERR(sfb->lcd_clk)) {
dev_err(dev, "failed to get lcd clock\n");
ret = PTR_ERR(sfb->lcd_clk);
goto err_bus_clk;
}
clk_prepare_enable(sfb->lcd_clk);
}
pm_runtime_enable(sfb->dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sfb->regs = devm_request_and_ioremap(dev, res);
if (!sfb->regs) {
dev_err(dev, "failed to map registers\n");
ret = -ENXIO;
goto err_lcd_clk;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "failed to acquire irq resource\n");
ret = -ENOENT;
goto err_lcd_clk;
}
sfb->irq_no = res->start;
ret = devm_request_irq(dev, sfb->irq_no, s3c_fb_irq,
0, "s3c_fb", sfb);
if (ret) {
dev_err(dev, "irq request failed\n");
goto err_lcd_clk;
}
dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
platform_set_drvdata(pdev, sfb);
pm_runtime_get_sync(sfb->dev);
/* setup gpio and output polarity controls */
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
/* set video clock running at under-run */
if (sfb->variant.has_fixvclk) {
reg = readl(sfb->regs + VIDCON1);
reg &= ~VIDCON1_VCLK_MASK;
reg |= VIDCON1_VCLK_RUN;
writel(reg, sfb->regs + VIDCON1);
}
/* zero all windows before we do anything */
for (win = 0; win < fbdrv->variant.nr_windows; win++)
s3c_fb_clear_win(sfb, win);
/* initialise colour key controls */
for (win = 0; win < (fbdrv->variant.nr_windows - 1); win++) {
void __iomem *regs = sfb->regs + sfb->variant.keycon;
regs += (win * 8);
writel(0xffffff, regs + WKEYCON0);
writel(0xffffff, regs + WKEYCON1);
}
s3c_fb_set_rgb_timing(sfb);
/* we have the register setup, start allocating framebuffers */
for (win = 0; win < fbdrv->variant.nr_windows; win++) {
if (!pd->win[win])
continue;
ret = s3c_fb_probe_win(sfb, win, fbdrv->win[win],
&sfb->windows[win]);
if (ret < 0) {
dev_err(dev, "failed to create window %d\n", win);
for (; win >= 0; win--)
s3c_fb_release_win(sfb, sfb->windows[win]);
goto err_pm_runtime;
}
}
platform_set_drvdata(pdev, sfb);
pm_runtime_put_sync(sfb->dev);
return 0;
err_pm_runtime:
pm_runtime_put_sync(sfb->dev);
err_lcd_clk:
pm_runtime_disable(sfb->dev);
if (!sfb->variant.has_clksel)
clk_disable_unprepare(sfb->lcd_clk);
err_bus_clk:
clk_disable_unprepare(sfb->bus_clk);
return ret;
}
/**
* s3c_fb_remove() - Cleanup on module finalisation
* @pdev: The platform device we are bound to.
*
* Shutdown and then release all the resources that the driver allocated
* on initialisation.
*/
static int __devexit s3c_fb_remove(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
int win;
pm_runtime_get_sync(sfb->dev);
for (win = 0; win < S3C_FB_MAX_WIN; win++)
if (sfb->windows[win])
s3c_fb_release_win(sfb, sfb->windows[win]);
if (!sfb->variant.has_clksel)
clk_disable_unprepare(sfb->lcd_clk);
clk_disable_unprepare(sfb->bus_clk);
pm_runtime_put_sync(sfb->dev);
pm_runtime_disable(sfb->dev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int s3c_fb_suspend(struct device *dev)
{
struct s3c_fb *sfb = dev_get_drvdata(dev);
struct s3c_fb_win *win;
int win_no;
pm_runtime_get_sync(sfb->dev);
for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
win = sfb->windows[win_no];
if (!win)
continue;
/* use the blank function to push into power-down */
s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
}
if (!sfb->variant.has_clksel)
clk_disable_unprepare(sfb->lcd_clk);
clk_disable_unprepare(sfb->bus_clk);
pm_runtime_put_sync(sfb->dev);
return 0;
}
static int s3c_fb_resume(struct device *dev)
{
struct s3c_fb *sfb = dev_get_drvdata(dev);
struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
u32 reg;
pm_runtime_get_sync(sfb->dev);
clk_prepare_enable(sfb->bus_clk);
if (!sfb->variant.has_clksel)
clk_prepare_enable(sfb->lcd_clk);
/* setup gpio and output polarity controls */
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
/* set video clock running at under-run */
if (sfb->variant.has_fixvclk) {
reg = readl(sfb->regs + VIDCON1);
reg &= ~VIDCON1_VCLK_MASK;
reg |= VIDCON1_VCLK_RUN;
writel(reg, sfb->regs + VIDCON1);
}
/* zero all windows before we do anything */
for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
s3c_fb_clear_win(sfb, win_no);
for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
void __iomem *regs = sfb->regs + sfb->variant.keycon;
win = sfb->windows[win_no];
if (!win)
continue;
shadow_protect_win(win, 1);
regs += (win_no * 8);
writel(0xffffff, regs + WKEYCON0);
writel(0xffffff, regs + WKEYCON1);
shadow_protect_win(win, 0);
}
s3c_fb_set_rgb_timing(sfb);
/* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
continue;
dev_dbg(dev, "resuming window %d\n", win_no);
s3c_fb_set_par(win->fbinfo);
}
pm_runtime_put_sync(sfb->dev);
return 0;
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int s3c_fb_runtime_suspend(struct device *dev)
{
struct s3c_fb *sfb = dev_get_drvdata(dev);
if (!sfb->variant.has_clksel)
clk_disable_unprepare(sfb->lcd_clk);
clk_disable_unprepare(sfb->bus_clk);
return 0;
}
static int s3c_fb_runtime_resume(struct device *dev)
{
struct s3c_fb *sfb = dev_get_drvdata(dev);
struct s3c_fb_platdata *pd = sfb->pdata;
clk_prepare_enable(sfb->bus_clk);
if (!sfb->variant.has_clksel)
clk_prepare_enable(sfb->lcd_clk);
/* setup gpio and output polarity controls */
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
return 0;
}
#endif
#define VALID_BPP124 (VALID_BPP(1) | VALID_BPP(2) | VALID_BPP(4))
#define VALID_BPP1248 (VALID_BPP124 | VALID_BPP(8))
static struct s3c_fb_win_variant s3c_fb_data_64xx_wins[] = {
[0] = {
.has_osd_c = 1,
.osd_size_off = 0x8,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(24)),
},
[1] = {
.has_osd_c = 1,
.has_osd_d = 1,
.osd_size_off = 0xc,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(28)),
},
[2] = {
.has_osd_c = 1,
.has_osd_d = 1,
.osd_size_off = 0xc,
.has_osd_alpha = 1,
.palette_sz = 16,
.palette_16bpp = 1,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(28)),
},
[3] = {
.has_osd_c = 1,
.has_osd_alpha = 1,
.palette_sz = 16,
.palette_16bpp = 1,
.valid_bpp = (VALID_BPP124 | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(28)),
},
[4] = {
.has_osd_c = 1,
.has_osd_alpha = 1,
.palette_sz = 4,
.palette_16bpp = 1,
.valid_bpp = (VALID_BPP(1) | VALID_BPP(2) |
VALID_BPP(16) | VALID_BPP(18) |
VALID_BPP(19) | VALID_BPP(24) |
VALID_BPP(25) | VALID_BPP(28)),
},
};
static struct s3c_fb_win_variant s3c_fb_data_s5p_wins[] = {
[0] = {
.has_osd_c = 1,
.osd_size_off = 0x8,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(13) |
VALID_BPP(15) | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(32)),
},
[1] = {
.has_osd_c = 1,
.has_osd_d = 1,
.osd_size_off = 0xc,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(13) |
VALID_BPP(15) | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(32)),
},
[2] = {
.has_osd_c = 1,
.has_osd_d = 1,
.osd_size_off = 0xc,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(13) |
VALID_BPP(15) | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(32)),
},
[3] = {
.has_osd_c = 1,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(13) |
VALID_BPP(15) | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(32)),
},
[4] = {
.has_osd_c = 1,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(13) |
VALID_BPP(15) | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(32)),
},
};
static struct s3c_fb_driverdata s3c_fb_data_64xx = {
.variant = {
.nr_windows = 5,
.vidtcon = VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x400,
[1] = 0x800,
[2] = 0x300,
[3] = 0x320,
[4] = 0x340,
},
.has_prtcon = 1,
.has_clksel = 1,
},
.win[0] = &s3c_fb_data_64xx_wins[0],
.win[1] = &s3c_fb_data_64xx_wins[1],
.win[2] = &s3c_fb_data_64xx_wins[2],
.win[3] = &s3c_fb_data_64xx_wins[3],
.win[4] = &s3c_fb_data_64xx_wins[4],
};
static struct s3c_fb_driverdata s3c_fb_data_s5pc100 = {
.variant = {
.nr_windows = 5,
.vidtcon = VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x2400,
[1] = 0x2800,
[2] = 0x2c00,
[3] = 0x3000,
[4] = 0x3400,
},
.has_prtcon = 1,
.has_blendcon = 1,
.has_clksel = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
.win[2] = &s3c_fb_data_s5p_wins[2],
.win[3] = &s3c_fb_data_s5p_wins[3],
.win[4] = &s3c_fb_data_s5p_wins[4],
};
static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = {
.variant = {
.nr_windows = 5,
.vidtcon = VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x2400,
[1] = 0x2800,
[2] = 0x2c00,
[3] = 0x3000,
[4] = 0x3400,
},
.has_shadowcon = 1,
.has_blendcon = 1,
.has_clksel = 1,
.has_fixvclk = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
.win[2] = &s3c_fb_data_s5p_wins[2],
.win[3] = &s3c_fb_data_s5p_wins[3],
.win[4] = &s3c_fb_data_s5p_wins[4],
};
static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
.variant = {
.nr_windows = 5,
.vidtcon = VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x2400,
[1] = 0x2800,
[2] = 0x2c00,
[3] = 0x3000,
[4] = 0x3400,
},
.has_shadowcon = 1,
.has_blendcon = 1,
.has_fixvclk = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
.win[2] = &s3c_fb_data_s5p_wins[2],
.win[3] = &s3c_fb_data_s5p_wins[3],
.win[4] = &s3c_fb_data_s5p_wins[4],
};
static struct s3c_fb_driverdata s3c_fb_data_exynos5 = {
.variant = {
.nr_windows = 5,
.vidtcon = FIMD_V8_VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x2400,
[1] = 0x2800,
[2] = 0x2c00,
[3] = 0x3000,
[4] = 0x3400,
},
.has_shadowcon = 1,
.has_blendcon = 1,
.has_fixvclk = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
.win[2] = &s3c_fb_data_s5p_wins[2],
.win[3] = &s3c_fb_data_s5p_wins[3],
.win[4] = &s3c_fb_data_s5p_wins[4],
};
/* S3C2443/S3C2416 style hardware */
static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = {
.variant = {
.nr_windows = 2,
.is_2443 = 1,
.vidtcon = 0x08,
.wincon = 0x14,
.winmap = 0xd0,
.keycon = 0xb0,
.osd = 0x28,
.osd_stride = 12,
.buf_start = 0x64,
.buf_size = 0x94,
.buf_end = 0x7c,
.palette = {
[0] = 0x400,
[1] = 0x800,
},
.has_clksel = 1,
},
.win[0] = &(struct s3c_fb_win_variant) {
.palette_sz = 256,
.valid_bpp = VALID_BPP1248 | VALID_BPP(16) | VALID_BPP(24),
},
.win[1] = &(struct s3c_fb_win_variant) {
.has_osd_c = 1,
.has_osd_alpha = 1,
.palette_sz = 256,
.valid_bpp = (VALID_BPP1248 | VALID_BPP(16) |
VALID_BPP(18) | VALID_BPP(19) |
VALID_BPP(24) | VALID_BPP(25) |
VALID_BPP(28)),
},
};
static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = {
.variant = {
.nr_windows = 3,
.vidtcon = VIDTCON0,
.wincon = WINCON(0),
.winmap = WINxMAP(0),
.keycon = WKEYCON,
.osd = VIDOSD_BASE,
.osd_stride = 16,
.buf_start = VIDW_BUF_START(0),
.buf_size = VIDW_BUF_SIZE(0),
.buf_end = VIDW_BUF_END(0),
.palette = {
[0] = 0x2400,
[1] = 0x2800,
[2] = 0x2c00,
},
.has_blendcon = 1,
.has_fixvclk = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
.win[2] = &s3c_fb_data_s5p_wins[2],
};
static struct platform_device_id s3c_fb_driver_ids[] = {
{
.name = "s3c-fb",
.driver_data = (unsigned long)&s3c_fb_data_64xx,
}, {
.name = "s5pc100-fb",
.driver_data = (unsigned long)&s3c_fb_data_s5pc100,
}, {
.name = "s5pv210-fb",
.driver_data = (unsigned long)&s3c_fb_data_s5pv210,
}, {
.name = "exynos4-fb",
.driver_data = (unsigned long)&s3c_fb_data_exynos4,
}, {
.name = "exynos5-fb",
.driver_data = (unsigned long)&s3c_fb_data_exynos5,
}, {
.name = "s3c2443-fb",
.driver_data = (unsigned long)&s3c_fb_data_s3c2443,
}, {
.name = "s5p64x0-fb",
.driver_data = (unsigned long)&s3c_fb_data_s5p64x0,
},
{},
};
MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
static const struct dev_pm_ops s3cfb_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(s3c_fb_suspend, s3c_fb_resume)
SET_RUNTIME_PM_OPS(s3c_fb_runtime_suspend, s3c_fb_runtime_resume,
NULL)
};
static struct platform_driver s3c_fb_driver = {
.probe = s3c_fb_probe,
.remove = __devexit_p(s3c_fb_remove),
.id_table = s3c_fb_driver_ids,
.driver = {
.name = "s3c-fb",
.owner = THIS_MODULE,
.pm = &s3cfb_pm_ops,
},
};
module_platform_driver(s3c_fb_driver);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c-fb");