blob: 00974b59407df59915c5751d5845228d040f91b7 [file] [log] [blame]
/*
*
* (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*
* ARM Mali DP hardware manipulation routines.
*/
#ifndef __MALIDP_HW_H__
#define __MALIDP_HW_H__
#include <linux/bitops.h>
#include "malidp_regs.h"
struct videomode;
struct clk;
/* Mali DP IP blocks */
enum {
MALIDP_DE_BLOCK = 0,
MALIDP_SE_BLOCK,
MALIDP_DC_BLOCK
};
/* Mali DP layer IDs */
enum {
DE_VIDEO1 = BIT(0),
DE_GRAPHICS1 = BIT(1),
DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
DE_VIDEO2 = BIT(3),
DE_SMART = BIT(4),
};
struct malidp_format_id {
u32 format; /* DRM fourcc */
u8 layer; /* bitmask of layers supporting it */
u8 id; /* used internally */
};
#define MALIDP_INVALID_FORMAT_ID 0xff
/*
* hide the differences between register maps
* by using a common structure to hold the
* base register offsets
*/
struct malidp_irq_map {
u32 irq_mask; /* mask of IRQs that can be enabled in the block */
u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */
};
struct malidp_layer {
u16 id; /* layer ID */
u16 base; /* address offset for the register bank */
u16 ptr; /* address offset for the pointer register */
u16 stride_offset; /* Offset to the first stride register. */
};
/* regmap features */
#define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0)
struct malidp_hw_regmap {
/* address offset of the DE register bank */
/* is always 0x0000 */
/* address offset of the SE registers bank */
const u16 se_base;
/* address offset of the DC registers bank */
const u16 dc_base;
/* address offset for the output depth register */
const u16 out_depth_base;
/* bitmap with register map features */
const u8 features;
/* list of supported layers */
const u8 n_layers;
const struct malidp_layer *layers;
const struct malidp_irq_map de_irq_map;
const struct malidp_irq_map se_irq_map;
const struct malidp_irq_map dc_irq_map;
/* list of supported pixel formats for each layer */
const struct malidp_format_id *pixel_formats;
const u8 n_pixel_formats;
/* pitch alignment requirement in bytes */
const u8 bus_align_bytes;
};
/* device features */
/* Unlike DP550/650, DP500 has 3 stride registers in its video layer. */
#define MALIDP_DEVICE_LV_HAS_3_STRIDES BIT(0)
struct malidp_hw_device {
const struct malidp_hw_regmap map;
void __iomem *regs;
/* APB clock */
struct clk *pclk;
/* AXI clock */
struct clk *aclk;
/* main clock for display core */
struct clk *mclk;
/* pixel clock for display core */
struct clk *pxlclk;
/*
* Validate the driver instance against the hardware bits
*/
int (*query_hw)(struct malidp_hw_device *hwdev);
/*
* Set the hardware into config mode, ready to accept mode changes
*/
void (*enter_config_mode)(struct malidp_hw_device *hwdev);
/*
* Tell hardware to exit configuration mode
*/
void (*leave_config_mode)(struct malidp_hw_device *hwdev);
/*
* Query if hardware is in configuration mode
*/
bool (*in_config_mode)(struct malidp_hw_device *hwdev);
/*
* Set configuration valid flag for hardware parameters that can
* be changed outside the configuration mode. Hardware will use
* the new settings when config valid is set after the end of the
* current buffer scanout
*/
void (*set_config_valid)(struct malidp_hw_device *hwdev);
/*
* Set a new mode in hardware. Requires the hardware to be in
* configuration mode before this function is called.
*/
void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
/*
* Calculate the required rotation memory given the active area
* and the buffer format.
*/
int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
u8 features;
u8 min_line_size;
u16 max_line_size;
/* size of memory used for rotating layers, up to two banks available */
u32 rotation_memory[2];
};
/* Supported variants of the hardware */
enum {
MALIDP_500 = 0,
MALIDP_550,
MALIDP_650,
/* keep the next entry last */
MALIDP_MAX_DEVICES
};
extern const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES];
static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
{
return readl(hwdev->regs + reg);
}
static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
u32 value, u32 reg)
{
writel(value, hwdev->regs + reg);
}
static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data |= mask;
malidp_hw_write(hwdev, data, reg);
}
static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data &= ~mask;
malidp_hw_write(hwdev, data, reg);
}
static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
u8 block)
{
switch (block) {
case MALIDP_SE_BLOCK:
return hwdev->map.se_base;
case MALIDP_DC_BLOCK:
return hwdev->map.dc_base;
}
return 0;
}
static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
int malidp_de_irq_init(struct drm_device *drm, int irq);
void malidp_de_irq_fini(struct drm_device *drm);
int malidp_se_irq_init(struct drm_device *drm, int irq);
void malidp_se_irq_fini(struct drm_device *drm);
u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
u8 layer_id, u32 format);
static inline bool malidp_hw_pitch_valid(struct malidp_hw_device *hwdev,
unsigned int pitch)
{
return !(pitch & (hwdev->map.bus_align_bytes - 1));
}
/*
* background color components are defined as 12bits values,
* they will be shifted right when stored on hardware that
* supports only 8bits per channel
*/
#define MALIDP_BGND_COLOR_R 0x000
#define MALIDP_BGND_COLOR_G 0x000
#define MALIDP_BGND_COLOR_B 0x000
#endif /* __MALIDP_HW_H__ */