blob: 9e1e571ba346ad7a240faf5a18a54b3f108e3cc7 [file] [log] [blame]
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm7360";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <375000000>;
cpu@0 {
compatible = "brcm,bmips3300";
device_type = "cpu";
reg = <0>;
};
};
aliases {
uart0 = &uart0;
uart1 = &uart1;
uart2 = &uart2;
};
cpu_intc: cpu_intc {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
clocks {
uart_clk: uart_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <81000000>;
};
};
rdb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@411400 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
sun_l2_intc: sun_l2_intc@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <48>;
};
gisb-arb@400000 {
compatible = "brcm,bcm7400-gisb-arb";
reg = <0x400000 0xdc>;
native-endian;
interrupt-parent = <&sun_l2_intc>;
interrupts = <0>, <2>;
brcm,gisb-arb-master-mask = <0x2f3>;
brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
"rdc_0", "raaga_0",
"avd_0", "jtag_0";
};
upg_irq0_intc: upg_irq0_intc@406600 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>;
brcm,int-map-mask = <0x44>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <56>;
};
sun_top_ctrl: syscon@404000 {
compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
reg = <0x404000 0x51c>;
little-endian;
};
reboot {
compatible = "brcm,brcmstb-reboot";
syscon = <&sun_top_ctrl 0x304 0x308>;
};
uart0: serial@406800 {
compatible = "ns16550a";
reg = <0x406800 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <61>;
clocks = <&uart_clk>;
status = "disabled";
};
uart1: serial@406840 {
compatible = "ns16550a";
reg = <0x406840 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <62>;
clocks = <&uart_clk>;
status = "disabled";
};
uart2: serial@406880 {
compatible = "ns16550a";
reg = <0x406880 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <63>;
clocks = <&uart_clk>;
status = "disabled";
};
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
mac-address = [ 00 10 18 36 23 1a ];
compatible = "brcm,genet-v2";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x430000 0x4c8c>;
interrupts = <24>, <25>;
interrupt-parent = <&periph_intc>;
status = "disabled";
mdio@e14 {
compatible = "brcm,genet-mdio-v2";
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0xe14 0x8>;
phy1: ethernet-phy@1 {
max-speed = <100>;
reg = <0x1>;
compatible = "brcm,40nm-ephy",
"ethernet-phy-ieee802.3-c22";
};
};
};
ehci0: usb@480300 {
compatible = "brcm,bcm7360-ehci", "generic-ehci";
reg = <0x480300 0x100>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <65>;
status = "disabled";
};
ohci0: usb@480400 {
compatible = "brcm,bcm7360-ohci", "generic-ohci";
reg = <0x480400 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <66>;
status = "disabled";
};
};
};