blob: c0060e4f7379fe775d78f6dfb9d5db4c169f7a05 [file] [log] [blame]
/*
* Copyright 2014 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun9i-a80.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A80 Optimus Board";
compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
aliases {
serial0 = &uart0;
serial1 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
/* The LED names match those found on the board */
led2 {
label = "optimus:led2:usr";
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
};
led3 {
label = "optimus:led3:usr";
gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
};
led4 {
label = "optimus:led4:usr";
gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
};
};
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_pin_optimus>;
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins_a>;
status = "okay";
};
&i2c3_pins_a {
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&ohci0 {
status = "okay";
};
&ohci2 {
status = "okay";
};
&pio {
led_pins_optimus: led-pins@0 {
allwinner,pins = "PH0", "PH1";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
allwinner,pins = "PH18";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
allwinner,pins = "PH4";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
allwinner,pins = "PH5";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
cd-inverted;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <8>;
non-removable;
status = "okay";
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_optimus>;
gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
status = "okay";
};
&r_ir {
status = "okay";
};
&r_pio {
led_r_pins_optimus: led-pins@1 {
allwinner,pins = "PM15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_rsb {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
&uart4_pins_a {
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&usbphy1 {
phy-supply = <&reg_usb1_vbus>;
status = "okay";
};
&usbphy2 {
status = "okay";
};
&usbphy3 {
phy-supply = <&reg_usb3_vbus>;
status = "okay";
};