blob: 1e6ab87e446092dce9add20961eb4455b56e3a34 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
menu "Audio support for Texas Instruments SoCs"
depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST
config SND_SOC_TI_EDMA_PCM
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
config SND_SOC_TI_SDMA_PCM
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
config SND_SOC_TI_UDMA_PCM
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
comment "Texas Instruments DAI support for:"
config SND_SOC_DAVINCI_ASP
tristate "daVinci Audio Serial Port (ASP) or McBSP support"
depends on ARCH_DAVINCI || COMPILE_TEST
select SND_SOC_TI_EDMA_PCM
help
Say Y or M here if you want audio support via daVinci ASP or McBSP.
The driver only implements the ASP support which is a subset of
daVinci McBSP (w/o the multichannel support).
config SND_SOC_DAVINCI_MCASP
tristate "Multichannel Audio Serial Port (McASP) support"
select SND_SOC_TI_EDMA_PCM
select SND_SOC_TI_SDMA_PCM
select SND_SOC_TI_UDMA_PCM
help
Say Y or M here if you want to have support for McASP IP found in
various Texas Instruments SoCs like:
- daVinci devices
- Sitara line of SoCs (AM335x, AM438x, etc)
- DRA7x devices
- Keystone devices
- K3 devices (am654, j721e)
config SND_SOC_DAVINCI_VCIF
tristate "daVinci Voice Interface (VCIF) support"
depends on ARCH_DAVINCI || COMPILE_TEST
select SND_SOC_TI_EDMA_PCM
help
Say Y or M here if you want audio support via daVinci VCIF.
config SND_SOC_OMAP_DMIC
tristate "Digital Microphone Module (DMIC) support"
depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
select SND_SOC_TI_SDMA_PCM
help
Say Y or M here if you want to have support for DMIC IP found in
OMAP4 and OMAP5.
config SND_SOC_OMAP_MCBSP
tristate "Multichannel Buffered Serial Port (McBSP) support"
depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST
select SND_SOC_TI_SDMA_PCM
help
Say Y or M here if you want to have support for McBSP IP found in
Texas Instruments OMAP1/2/3/4/5 SoCs.
config SND_SOC_OMAP_MCPDM
tristate "Multichannel PDM Controller (McPDM) support"
depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
select SND_SOC_TI_SDMA_PCM
help
Say Y or M here if you want to have support for McPDM IP found in
OMAP4 and OMAP5.
comment "Audio support for boards with Texas Instruments SoCs"
config SND_SOC_NOKIA_N810
tristate "SoC Audio support for Nokia N810"
depends on MACH_NOKIA_N810 && I2C
select SND_SOC_OMAP_MCBSP
select SND_SOC_TLV320AIC3X
help
Say Y or M if you want to add support for SoC audio on Nokia N810.
config SND_SOC_NOKIA_RX51
tristate "SoC Audio support for Nokia RX-51"
depends on ARCH_OMAP3 && I2C && GPIOLIB
select SND_SOC_OMAP_MCBSP
select SND_SOC_TLV320AIC3X
select SND_SOC_TPA6130A2
help
Say Y or M if you want to add support for SoC audio on Nokia RX-51
hardware. This is also known as Nokia N900 product.
config SND_SOC_OMAP3_PANDORA
tristate "SoC Audio support for OMAP3 Pandora"
depends on ARCH_OMAP3
depends on TWL4030_CORE
select SND_SOC_OMAP_MCBSP
select SND_SOC_TWL4030
help
Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora.
config SND_SOC_OMAP3_TWL4030
tristate "SoC Audio support for OMAP3 based boards with twl4030 codec"
depends on ARCH_OMAP3 || COMPILE_TEST
depends on TWL4030_CORE
select SND_SOC_OMAP_MCBSP
select SND_SOC_TWL4030
help
Say Y or M if you want to add support for SoC audio on OMAP3 based
boards using twl4030 as codec. This driver currently supports:
- Beagleboard or Devkit8000
- Gumstix Overo or CompuLab CM-T35/CM-T3730
- IGEP v2
- OMAP3EVM
- SDP3430
- Zoom2
config SND_SOC_OMAP_ABE_TWL6040
tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
depends on TWL6040_CORE && COMMON_CLK
depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
select SND_SOC_OMAP_DMIC
select SND_SOC_OMAP_MCPDM
select SND_SOC_TWL6040
help
Say Y or M if you want to add support for SoC audio on OMAP boards
using ABE and twl6040 codec. This driver currently supports:
- SDP4430/Blaze boards
- PandaBoard (4430)
- PandaBoardES (4460)
- OMAP5 uEVM
config SND_SOC_OMAP_AMS_DELTA
tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
depends on MACH_AMS_DELTA && TTY
select SND_SOC_OMAP_MCBSP
select SND_SOC_CX20442
help
Say Y or M if you want to add support for SoC audio device
connected to a handset and a speakerphone found on Amstrad E3 (Delta)
videophone.
Note that in order to get those devices fully supported, you have to
build the kernel with standard serial port driver included and
configured for at least 4 ports. Then, from userspace, you must load
a line discipline #19 on the modem (ttyS3) serial line. The simplest
way to achieve this is to install util-linux-ng and use the included
ldattach utility. This can be started automatically from udev,
a simple rule like this one should do the trick (it does for me):
ACTION=="add", KERNEL=="controlC0", \
RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
config SND_SOC_OMAP_HDMI
tristate "OMAP4/5 HDMI audio support"
depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST
select SND_SOC_TI_SDMA_PCM
help
For HDMI audio to work OMAPDSS HDMI support should be
enabled.
The hdmi audio driver implements cpu-dai component using the
callbacks provided by OMAPDSS and registers the component
under DSS HDMI device. Omap-pcm is registered for platform
component also under DSS HDMI device. Dummy codec is used as
as codec component. The hdmi audio driver implements also
the card and registers it under its own platform device.
The device for the driver is registered by OMAPDSS hdmi
driver.
config SND_SOC_OMAP_OSK5912
tristate "SoC Audio support for omap osk5912"
depends on MACH_OMAP_OSK && I2C
select SND_SOC_OMAP_MCBSP
select SND_SOC_TLV320AIC23_I2C
help
Say Y or M if you want to add support for SoC audio on osk5912.
config SND_SOC_DAVINCI_EVM
tristate "SoC Audio support for DaVinci EVMs"
depends on ARCH_DAVINCI && I2C
select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM
select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC
select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC
select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM
select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM
select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on the following TI
DaVinci EVM platforms:
- DM355
- DM365
- DM6446
- DM6447
- DM830
- DM850
choice
prompt "DM365 codec select"
depends on SND_SOC_DAVINCI_EVM
depends on MACH_DAVINCI_DM365_EVM
config SND_SOC_DM365_AIC3X_CODEC
bool "Audio Codec - AIC3101"
help
Say Y if you want to add support for AIC3101 audio codec
config SND_SOC_DM365_VOICE_CODEC
bool "Voice Codec - CQ93VC"
help
Say Y if you want to add support for SoC On-chip voice codec
endchoice
config SND_SOC_DM365_VOICE_CODEC_MODULE
def_tristate y
depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC
select MFD_DAVINCI_VOICECODEC
select SND_SOC_CQ0093VC
help
The is an internal symbol needed to ensure that the codec
and MFD driver can be built as loadable modules if necessary.
config SND_SOC_J721E_EVM
tristate "SoC Audio support for j721e EVM"
depends on ARCH_K3_J721E_SOC || COMPILE_TEST
depends on I2C
select SND_SOC_PCM3168A_I2C
select SND_SOC_DAVINCI_MCASP
help
Say Y if you want to add support for SoC audio on j721e Common
Processor Board and Infotainment expansion board.
endmenu