Florian Fainelli | 879bd83 | 2014-08-27 17:04:58 -0700 | [diff] [blame] | 1 | * Broadcom Starfighter 2 integrated swich |
| 2 | |
| 3 | Required properties: |
| 4 | |
| 5 | - compatible: should be "brcm,bcm7445-switch-v4.0" |
| 6 | - reg: addresses and length of the register sets for the device, must be 6 |
| 7 | pairs of register addresses and lengths |
| 8 | - interrupts: interrupts for the devices, must be two interrupts |
| 9 | - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt |
| 10 | - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt |
| 11 | - #size-cells: must be 0 |
| 12 | - #address-cells: must be 2, see dsa/dsa.txt |
| 13 | |
| 14 | Subnodes: |
| 15 | |
| 16 | The integrated switch subnode should be specified according to the binding |
| 17 | described in dsa/dsa.txt. |
| 18 | |
| 19 | Optional properties: |
| 20 | |
| 21 | - reg-names: litteral names for the device base register addresses, when present |
| 22 | must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" |
| 23 | |
| 24 | - interrupt-names: litternal names for the device interrupt lines, when present |
| 25 | must be: "switch_0" and "switch_1" |
| 26 | |
| 27 | - brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the |
| 28 | switch |
| 29 | |
| 30 | - brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported |
| 31 | by the switch |
| 32 | |
| 33 | - brcm,fcb-pause-override: boolean property, if present indicates that the switch |
| 34 | supports Failover Control Block pause override capability |
| 35 | |
| 36 | - brcm,acb-packets-inflight: boolean property, if present indicates that the switch |
| 37 | Admission Control Block supports reporting the number of packets in-flight in a |
| 38 | switch queue |
| 39 | |
| 40 | Example: |
| 41 | |
| 42 | switch_top@f0b00000 { |
| 43 | compatible = "simple-bus"; |
| 44 | #size-cells = <1>; |
| 45 | #address-cells = <1>; |
| 46 | ranges = <0 0xf0b00000 0x40804>; |
| 47 | |
| 48 | ethernet_switch@0 { |
| 49 | compatible = "brcm,bcm7445-switch-v4.0"; |
| 50 | #size-cells = <0>; |
| 51 | #address-cells = <2>; |
| 52 | reg = <0x0 0x40000 |
| 53 | 0x40000 0x110 |
| 54 | 0x40340 0x30 |
| 55 | 0x40380 0x30 |
| 56 | 0x40400 0x34 |
| 57 | 0x40600 0x208>; |
| 58 | interrupts = <0 0x18 0 |
| 59 | 0 0x19 0>; |
| 60 | brcm,num-gphy = <1>; |
| 61 | brcm,num-rgmii-ports = <2>; |
| 62 | brcm,fcb-pause-override; |
| 63 | brcm,acb-packets-inflight; |
| 64 | |
| 65 | ... |
| 66 | switch@0 { |
| 67 | reg = <0 0>; |
| 68 | #size-cells = <0>; |
| 69 | #address-cells <1>; |
| 70 | |
| 71 | port@0 { |
| 72 | label = "gphy"; |
| 73 | reg = <0>; |
| 74 | }; |
| 75 | ... |
| 76 | }; |
| 77 | }; |
| 78 | }; |