blob: c8d6efb99dbf668b7f283f23624c2f50f632c442 [file] [log] [blame]
Michal Simek575ca282009-03-27 14:25:50 +01001config MICROBLAZE
2 def_bool y
Yinghai Lu95f72d12010-07-12 14:36:09 +10003 select HAVE_MEMBLOCK
Michal Simek2fd7c762009-11-16 09:40:14 +01004 select HAVE_FUNCTION_TRACER
Michal Simek6d9e60c2009-11-16 09:55:08 +01005 select HAVE_FUNCTION_TRACE_MCOUNT_TEST
Michal Simeka0d3e662009-11-16 10:32:10 +01006 select HAVE_FUNCTION_GRAPH_TRACER
Michal Simek7d241ff2009-12-10 14:15:44 +01007 select HAVE_DYNAMIC_FTRACE
8 select HAVE_FTRACE_MCOUNT_RECORD
Michal Simek6fa612b2009-05-11 15:49:12 +02009 select ARCH_WANT_OPTIONAL_GPIOLIB
John Williams3540ce82009-11-24 20:27:54 +100010 select HAVE_OPROFILE
Michal Simek2d5973c2010-08-03 11:45:08 +020011 select HAVE_ARCH_KGDB
Michal Simekccfe27d2010-01-14 11:21:02 +010012 select HAVE_DMA_ATTRS
13 select HAVE_DMA_API_DEBUG
John Williams3540ce82009-11-24 20:27:54 +100014 select TRACING_SUPPORT
Stephen Rothwellae5bf632010-06-29 12:42:00 +100015 select OF
Stephen Neuendorffere6ce1322010-11-18 15:54:56 -080016 select OF_EARLY_FLATTREE
Thomas Gleixnerb6e31622011-01-19 20:35:05 +010017 select HAVE_GENERIC_HARDIRQS
18 select GENERIC_IRQ_PROBE
Thomas Gleixner9d61c18b2011-03-24 14:55:52 +010019 select GENERIC_IRQ_SHOW
Michael S. Tsirkin1b34d162011-11-24 21:06:41 +020020 select GENERIC_PCI_IOMAP
Ben Hutchings9f13a1f2012-01-10 03:04:32 +000021 select GENERIC_CPU_DEVICES
Daniel Borkmanneacb6ec2012-01-19 12:37:13 +010022 select GENERIC_ATOMIC64
Michal Simek575ca282009-03-27 14:25:50 +010023
24config SWAP
25 def_bool n
26
27config RWSEM_GENERIC_SPINLOCK
28 def_bool y
29
30config RWSEM_XCHGADD_ALGORITHM
31 bool
32
33config ARCH_HAS_ILOG2_U32
34 def_bool n
35
36config ARCH_HAS_ILOG2_U64
37 def_bool n
38
Michal Simek575ca282009-03-27 14:25:50 +010039config GENERIC_HWEIGHT
40 def_bool y
41
Michal Simek575ca282009-03-27 14:25:50 +010042config GENERIC_CALIBRATE_DELAY
43 def_bool y
44
Michal Simek575ca282009-03-27 14:25:50 +010045config GENERIC_TIME_VSYSCALL
46 def_bool n
47
48config GENERIC_CLOCKEVENTS
49 def_bool y
50
Michal Simek6fa612b2009-05-11 15:49:12 +020051config GENERIC_GPIO
52 def_bool y
53
Remis Lima Baima14f87382009-06-18 19:55:32 +020054config GENERIC_CSUM
55 def_bool y
56
Michal Simek24b45a12009-11-10 15:57:01 +010057config STACKTRACE_SUPPORT
58 def_bool y
59
Michal Simekbf2d8092009-12-10 12:07:02 +010060config LOCKDEP_SUPPORT
61 def_bool y
62
Michal Simekfb5a32d2009-11-16 09:09:47 +010063config HAVE_LATENCYTOP_SUPPORT
64 def_bool y
65
Michal Simek575ca282009-03-27 14:25:50 +010066source "init/Kconfig"
67
68source "kernel/Kconfig.freezer"
69
70source "arch/microblaze/platform/Kconfig.platform"
71
72menu "Processor type and features"
73
Michal Simek296e2602010-01-12 11:05:49 +010074source "kernel/time/Kconfig"
Michal Simek575ca282009-03-27 14:25:50 +010075
76source "kernel/Kconfig.preempt"
77
78source "kernel/Kconfig.hz"
79
80config MMU
Michal Simeka116f6d2009-05-26 16:30:31 +020081 bool "MMU support"
82 default n
Michal Simek575ca282009-03-27 14:25:50 +010083
84config NO_MMU
85 bool
86 depends on !MMU
87 default y
88
89comment "Boot options"
90
91config CMDLINE_BOOL
92 bool "Default bootloader kernel arguments"
93
94config CMDLINE
95 string "Default kernel command string"
96 depends on CMDLINE_BOOL
97 default "console=ttyUL0,115200"
98 help
99 On some architectures there is currently no way for the boot loader
100 to pass arguments to the kernel. For these architectures, you should
101 supply some command-line options at build time by entering them
102 here.
103
104config CMDLINE_FORCE
105 bool "Force default kernel command string"
106 depends on CMDLINE_BOOL
107 default n
108 help
109 Set this to have arguments from the default kernel command string
110 override those passed by the boot loader.
111
Michal Simek68c6ac32010-08-06 08:50:35 +0200112config SECCOMP
113 bool "Enable seccomp to safely compute untrusted bytecode"
114 depends on PROC_FS
115 default y
116 help
117 This kernel feature is useful for number crunching applications
118 that may need to compute untrusted bytecode during their
119 execution. By using pipes or other transports made available to
120 the process as file descriptors supporting the read/write
121 syscalls, it's possible to isolate those applications in
122 their own address space using seccomp. Once seccomp is
123 enabled via /proc/<pid>/seccomp, it cannot be disabled
124 and the task is only allowed to execute a few safe syscalls
125 defined by each seccomp mode.
126
127 If unsure, say Y. Only embedded should say N here.
128
Michal Simek575ca282009-03-27 14:25:50 +0100129endmenu
130
Michal Simeka116f6d2009-05-26 16:30:31 +0200131menu "Advanced setup"
132
133config ADVANCED_OPTIONS
134 bool "Prompt for advanced kernel configuration options"
Michal Simeka116f6d2009-05-26 16:30:31 +0200135 help
136 This option will enable prompting for a variety of advanced kernel
137 configuration options. These options can cause the kernel to not
138 work if they are set incorrectly, but can be used to optimize certain
139 aspects of kernel memory management.
140
141 Unless you know what you are doing, say N here.
142
143comment "Default settings for advanced configuration options are used"
144 depends on !ADVANCED_OPTIONS
145
Michal Simek3a0d7a42010-02-22 12:16:08 +0100146config XILINX_UNCACHED_SHADOW
147 bool "Are you using uncached shadow for RAM ?"
148 depends on ADVANCED_OPTIONS && !MMU
149 default n
150 help
151 This is needed to be able to allocate uncachable memory regions.
152 The feature requires the design to define the RAM memory controller
153 window to be twice as large as the actual physical memory.
154
Michal Simeka116f6d2009-05-26 16:30:31 +0200155config HIGHMEM_START_BOOL
156 bool "Set high memory pool address"
157 depends on ADVANCED_OPTIONS && HIGHMEM
158 help
159 This option allows you to set the base address of the kernel virtual
160 area used to map high memory pages. This can be useful in
161 optimizing the layout of kernel virtual memory.
162
163 Say N here unless you know what you are doing.
164
165config HIGHMEM_START
166 hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
167 depends on MMU
168 default "0xfe000000"
169
170config LOWMEM_SIZE_BOOL
171 bool "Set maximum low memory"
Michal Simekb8a84052010-02-22 11:33:07 +0100172 depends on ADVANCED_OPTIONS && MMU
Michal Simeka116f6d2009-05-26 16:30:31 +0200173 help
174 This option allows you to set the maximum amount of memory which
175 will be used as "low memory", that is, memory which the kernel can
176 access directly, without having to set up a kernel virtual mapping.
177 This can be useful in optimizing the layout of kernel virtual
178 memory.
179
180 Say N here unless you know what you are doing.
181
182config LOWMEM_SIZE
183 hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
Michal Simeka116f6d2009-05-26 16:30:31 +0200184 default "0x30000000"
185
Michal Simek0b9b0202010-11-08 12:37:40 +0100186config MANUAL_RESET_VECTOR
187 hex "Microblaze reset vector address setup"
188 default "0x0"
189 help
190 Set this option to have the kernel override the CPU Reset vector.
191 If zero, no change will be made to the MicroBlaze reset vector at
192 address 0x0.
193 If non-zero, a jump instruction to this address, will be written
194 to the reset vector at address 0x0.
195 If you are unsure, set it to default value 0x0.
196
Michal Simeka116f6d2009-05-26 16:30:31 +0200197config KERNEL_START_BOOL
198 bool "Set custom kernel base address"
199 depends on ADVANCED_OPTIONS
200 help
201 This option allows you to set the kernel virtual address at which
202 the kernel will map low memory (the kernel image will be linked at
203 this address). This can be useful in optimizing the virtual memory
204 layout of the system.
205
206 Say N here unless you know what you are doing.
207
208config KERNEL_START
209 hex "Virtual address of kernel base" if KERNEL_START_BOOL
210 default "0xc0000000" if MMU
211 default KERNEL_BASE_ADDR if !MMU
212
213config TASK_SIZE_BOOL
214 bool "Set custom user task size"
Michal Simekb8a84052010-02-22 11:33:07 +0100215 depends on ADVANCED_OPTIONS && MMU
Michal Simeka116f6d2009-05-26 16:30:31 +0200216 help
217 This option allows you to set the amount of virtual address space
218 allocated to user tasks. This can be useful in optimizing the
219 virtual memory layout of the system.
220
221 Say N here unless you know what you are doing.
222
223config TASK_SIZE
224 hex "Size of user task space" if TASK_SIZE_BOOL
Michal Simeka116f6d2009-05-26 16:30:31 +0200225 default "0x80000000"
226
Steven J. Magnaniba9c4f82010-05-13 10:48:27 -0500227choice
228 prompt "Page size"
229 default MICROBLAZE_4K_PAGES
230 depends on ADVANCED_OPTIONS && !MMU
231 help
232 Select the kernel logical page size. Increasing the page size
233 will reduce software overhead at each page boundary, allow
234 hardware prefetch mechanisms to be more effective, and allow
235 larger dma transfers increasing IO efficiency and reducing
236 overhead. However the utilization of memory will increase.
237 For example, each cached file will using a multiple of the
238 page size to hold its contents and the difference between the
239 end of file and the end of page is wasted.
240
241 If unsure, choose 4K_PAGES.
242
243config MICROBLAZE_4K_PAGES
244 bool "4k page size"
245
246config MICROBLAZE_8K_PAGES
247 bool "8k page size"
248
249config MICROBLAZE_16K_PAGES
250 bool "16k page size"
251
252config MICROBLAZE_32K_PAGES
253 bool "32k page size"
254
255endchoice
256
Michal Simeka116f6d2009-05-26 16:30:31 +0200257endmenu
258
Michal Simek575ca282009-03-27 14:25:50 +0100259source "mm/Kconfig"
260
Tobias Klauser910672d2011-03-02 18:38:35 +0100261menu "Executable file formats"
Michal Simek575ca282009-03-27 14:25:50 +0100262
263source "fs/Kconfig.binfmt"
264
265endmenu
266
Michal Simeka6475c12010-01-18 15:27:10 +0100267menu "Bus Options"
268
269config PCI
270 bool "PCI support"
271
272config PCI_DOMAINS
273 def_bool PCI
274
275config PCI_SYSCALL
276 def_bool PCI
277
Michal Simek733cc212010-01-18 15:27:11 +0100278config PCI_XILINX
279 bool "Xilinx PCI host bridge support"
280 depends on PCI
281
Michal Simeka6475c12010-01-18 15:27:10 +0100282source "drivers/pci/Kconfig"
283
284endmenu
285
Michal Simek575ca282009-03-27 14:25:50 +0100286source "net/Kconfig"
287
288source "drivers/Kconfig"
289
290source "fs/Kconfig"
291
292source "arch/microblaze/Kconfig.debug"
293
294source "security/Kconfig"
295
296source "crypto/Kconfig"
297
298source "lib/Kconfig"